Recommended
More Related Content
What's hot
Similar to Tv log g3 operation presentation1
Similar to Tv log g3 operation presentation1 (20)
Tv log g3 operation presentation1
- 1. TV Log – G3 Introduction:- A Digital Video Recorder Provide 24 Hours non-stop operation for TV Monitoring, Comprehensive management of:- • digital assets from acquisition through ingest manipulation, • archiving, • ad’s certification and content analysis
- 2. TV Log – G3 It is a powerful tools for a variety of applications in the: • Corporate • Educational • Government • Advertising agencies and • TV broadcast markets
- 3. TV Log – G3 Applications:- • Advertisement media departments, Media Production, Brand competitor analysis with multiple TV realtime monitoring • TV Broadcasting law obligations • Customer advertisement certification with “legal copy” • TV Channel Archiving • TV news departments & Politics analysis
- 7. Active Status LED • With A Running LED Showing System is Active Status Bar • The number of channel is as shown on top of the LED • Recording mode is active when the LED turn Green • LED turn Black when it is in Stop mode
- 12. Software Version/System Code/Serial Number • The Software Version indicate the current version of the software • The Serial Number been coded when the machine is being setup and match with registration code for authentication • System Code can be change via Configuration -> IP Configuration
- 15. Power Off Button (Exit) • When Exit is pressed, the system will turn off • This operation require password An On Screen Keyboard & Keypad is provided during this operation, No External Keyboard is required for this system
- 16. On Screen Keyboard & Keypad
- 19. Remote Login • This window showing the total number of remote client login to the system
- 22. Storage Status
- 25. Info Bar This window showing the following information:- • TV Channel Name • Audio selection • Date & Time TV Ch Name Audio Sel Date & Time
- 28. Login & Password Administration To proceed further whenever Login dialog box displays, a correct user Name and Password has to be entered • Login as Administrator will have full right
- 29. Alarm/Log Status Information Of Error Message Window • All Current Error will be shown in this message window • Error message and Alarm is Red in color to attract the operator attention
- 30. Alarm/Log Status The Error Message can be acknowledge by:- Pressing [A] to Acknowledge all alarm. Once acknowledged or no active alarm, the button LED will turn from
- 31. Alert Notification TVLog-G3 has Alert notification for:- • Video Loss • Audio Loss • HDD Defect • Recording Period • Storage Level & • Recycle Start This can be configured by…….
- 34. Alert Under what condition, the system will generate error message?
- 35. Alert Notification TVLog-G3 has Alert notification for:- • Video Loss • Audio Loss • HDD Defect • Recording Period • Storage Level & • Recycle Start
- 36. This can be configure:-
- 37. Alert Notification TVLog-G3 has Alert notification for:- • Video Loss • Audio Loss • HDD Defect • Recording Period • Storage Level & • Recycle Start
- 38. There are three alert messages about Recording Period:- 1. Recycle start but recording is less than the pre- defined 2. When HDD is 90% full and recording is less than the pre-defined 3. When HDD is full and recording is less than the pre-defined
- 39. Again this can be configured:-
- 40. Alert
- 42. Recording Mode
- 44. Configuration -> IP Filter
- 45. Configuration -> IP Filter • Act as system Firewall • Only allows the remote client of preset IP addresses to retrieve the live or recorded video • Three way of enhancing the firewall level:- – IP address is the remote client PC’s own IP address of the TVLog-G3 System – Server port & client port must be setup for each IP in order to establish the remote connection; Port 6050 & 5050 for live video – Three port for each IP to establish remote playback of recorded video; Port 137, 138 & 139
- 46. Configuration -> IP Configuration
- 47. Configuration -> Channel Setting
- 48. Configuration -> Remote Setting
- 49. Configuration -> Advanced Setting
- 50. Configuration -> Advanced Setting • Network Communication Enable As the name imply, its allow the network communication when remote monitoring is necessary • Health Check Enable A snapshot image is captured periodically to verify the conditions of system abnormal status • Remote Configuration Enable Its allow the system configuration or setup by another PC installed with TVLog-G3 Remote configuration software
- 51. Configuration -> Advanced Setting • Hardware Diagnosis Provides hardware auto diagnosis of system health status, and will reset the system in abnormal status • Playback Password Enable Log in dialog box appear whenever playback button is pressed. only Admin or user with password is allowed to playback the recorded video • Touch Screen Enable This is for TVLog Touch Screen Monitor
- 52. Configuration -> Advanced Setting • Time Lapse Duration To avoid big file size, longer retrieving time and reduce the file management resources, each video file duration is limited to 5 minutes. • Post Alarm Duration Recording Keep going on alarm. This value defines the buffer (post) recording time after the triggered alarm is back to normal
- 53. Configuration -> Advanced Setting
- 54. Configuration -> Advanced Setting -> Restore/Backup Configuration Setting can be saved to system and recovered if necessary. All parameters and setting will be backup, this includes:- • Recording rate • Recording mode, Schedule and • System IP values
- 55. Configuration -> Advanced Setting -> Restore/Backup Configuration
- 56. Configuration -> Advanced Setting -> Restore/Backup Configuration
- 57. Configuration -> Advanced Setting
- 58. Configuration -> Advanced Setting -> Import/Export Configuration
- 59. Configuration -> Advanced Setting -> Import/Export Configuration • Profiles are saved in date sequence • Profile will overwrite any existing profiles of same date if export is done more than one time each day
- 60. Configuration -> Advanced Setting -> Import/Export Configuration • The Mechanism of the Backup/Restore and Import/Export
- 61. Configuration -> Advanced Setting -> Import/Export Configuration • Import to TVLog-G3 from mobile storage Click “Select” to activate the Import Function
- 62. Configuration -> Advanced Setting -> Import/Export Configuration • Import to TVLog-G3 from mobile storage Chose the backup date of Configuration file
- 63. Configuration -> Advanced Setting -> Import/Export Configuration • Import to TVLog-G3 from mobile storage Import does not affect the Current configuration in use. Only when the imported Configuration is restored, the Current configuration will be modified
- 64. Configuration -> Advanced Setting -> Import/Export Configuration • Import to TVLog-G3 from mobile storage Import will get both admin1 And admin2 profiles from The mobile storage media. Either of these two can be Restored as current configuration
- 65. Configuration -> Advanced Setting -> Import/Export Configuration • Import to TVLog-G3 from mobile storage Import will get both admin1 And admin2 profiles from The mobile storage media. Either of these two can be Restored as current configuration
- 66. Configuration -> System Setting
- 67. Configuration -> System Setting • Setup Date/Time: Change the system date & time (your system has using GPS time sync) • Enable Watermark Display: Is disabled (un-checked) no logo is recorded in the video • Enable TV Channel Name/Date Display: Is disable (un-checked), time and date not recorded
- 68. Configuration -> System Setting
- 69. Setup Mask: To erase the top/button video noise when presented from RF signals
- 71. Configuration -> Comments Pre-defined text of interest that can be assigned anytime to any video during playback for quick search, analysis and backup
- 72. Configuration -> Comments (Program Import) Pre requisite:- • File in Excel format • TVLog G3 Exporter Tool &
- 73. Configuration -> Comments (Program Import) File In Excel Format
- 74. Configuration -> Comments (Program Import) TVLog G3 Exporter
- 75. Configuration -> Comments (Program Import) Job Import: • Create a pre-defined program/text list with TV Channel, date & Time • Using Smart Search to select the job name • Launch TVLog Exporter on any Window OS base computer
- 76. Configuration -> Comments 1 123 4 65 7
- 77. Smart Search Two option to search for a recorded video clips • Smart Search • Simple Playback
- 78. Smart Search • Smart Search – Date Time – Comment – Program – Job – A/V Status
- 79. Smart Search Two options to search for a recorded video clips • Smart Search • Playback
- 80. Main Screen
- 81. Main Screen
- 82. Main Screen
- 83. Smart Search By Date/Time TVLog-G3 Provides: • Simultaneous multi-channels playback (max. 4) • Exact Date Time Search • Playback in selected time zone • Full Screen Playback
- 84. Smart Search By Date/Time
- 85. Smart Search • Smart Search – Date Time – Comment – Program – Job – A/V Status
- 86. Smart Search By Comments 1 2 3 4 5 6 7
- 87. Smart Search • Smart Search – Date Time – Comment – Program – Job – A/V Status
- 88. Smart Search By Program 1 2 3 4 5 6 7
- 89. Smart Search • Smart Search – Date Time – Comment – Program – Job – A/V Status
- 90. Smart Search By Job 1 2 3 4 5 6 7
- 91. Smart Search • Smart Search – Date Time – Comment – Program – Job – A/V Status
- 92. Smart Search By A/V Status 1 2 3 4 5 6 7
- 95. Simple Playback
- 96. Add A Comment to Clip(s)
- 97. Add A Comment to Clip(s)
- 98. Crop Tool Using Advance Playback
- 99. Crop Tool Using Advance Playback 1. Select video using playback buttons [Start] & [End] or 2. Using [From] & [To] 3. Add cropped video file to the burn list by Clicking on [+] button 4. Repeat step 1 or 2 to 3 to add more video file to burn 5. Once video files are selected, click on [Show List] 6. The next window display the list of selected clip files ready for a backup
- 100. Crop Tool Using Advance Playback
- 101. Crop Tool Using Simple Playback 4
- 103. Daily Backup 4
- 104. Daily Backup 1. Select single TV Channel or Multi Channels for entire day backup 2. Select [Day] using the calendar box 3. Click the [Add] button to add the video files into backup list 4. Select the Burn Media 5. Click on [Burn] to start the backup process
- 106. Date Range Backup
- 107. Date Range Backup 1. Select single TV channel or Multi-TV Channels for date range backup 2. Select the [Start Date] and [End Date] parameters using the calendar box 3. Click the [Add] button to add the video files into backup list 4. Insert a FAT32 formatted USB thumb disk into the USB port 5. Click the [Burn] button to start the backup process
- 109. Audit Log
- 111. Thank You!
Editor's Notes
- Video Loss Check:- Select the define period in second for video loss alert to be triggered.Video Freeze Check:- Define period time in second:- define how long will the video freeze be consider as “Video Freeze”Define idle time in second:- how long will be the repeated situation considered as another video freeze alarm?When the first video freeze alarm is detected, there is possible a certain period of no video freeze at all.If this is defined as 60 sec, only when there is video freeze again after 60 sec, it will be considered as another “Video Freeze” alarmArchive Check:- Need to enter the number of hard disk physically installed. Once the number detected by the system is not matched to the number user entered, it will creat the message “HDD defect”
- HDD Full Alert: Select the entire HDD full alert in percentageNo. Channel/Define Period (Days): Select the desire recording days per TV Channel
- Port number is the port where the remote client PC can go through and access the TVLog-G4 System.These two values must be matched with each IP address ports set up in IP Configuration of TVLog-G4Server.
- Set up its own IP Configuration or Network Properties of the TVLog-G3 systemThis is to configure the communication ports of TVLog-G3 (Server) and Client (Remote Client PC) such that no other ports will be allowed for data transmission. By default (A) Server Port: 5050, (B) Client Port: 6050It is the name given to the TVLog-G3 in the nework to identify each system in the remote videoTo enable for internet connection with port filter
- Each Channel has the following parameters:Channel No and Name: is the name of the TV Channel displayed on the live/recorded video.Resolution: Controlling the video picture size (see value table above)Video Format: Controlling the video picture compression ratio.Quality:H (High): High video quality is set such that the compression ratio is at the lowest level. This mode should only be used when storage disk is large or recording period is not long because it will take up huge file storage size.M (Medium): Medium video quality is set and the compression ratio is at the middle level. This mode should be used for the compromise of storage disk and recording period.L (Low): Low video quality is set such that the compression ratio is at the highest level. This mode should be used when storage disk is small or recording period must be long because it will take up only small file storage size.
- Remote Setting is the configuration of sub‐channel parameters. Sub Channel Video is the specification ofremote video transmitted. It will affect the video quality and frame rate of remote video in TVLog‐G3 Remote Client site.Consequently, it will affect the consumption of bandwidth in video transmission.Bandwidth LimitSometimes, users have no idea of the sub channel video setting in order to fully utilize their networkbandwidth.Enable (Remote Channel): can be enabled or disable. Once enabled, the settings “FPS”, “Video Quality”& “Bandwidth Limit” will affect the remote video. On disable, the remote video will follow thespecification of main TV Channels.Video Quality: is the video resolution and size selected for remote transmission. Again, it is independentof frame rate of local video and recording.
- 1. Select “Job”2. Select the TV Channel Number3. Give a name to the “Job” into the Job Title input field.4. Click the [Select] button to choose the DATE when it will occurs.5. Select the Time of the “Job”6. Click the [Add] button to create the “Job”7. To edit the “Job”: change TV Channel number, job name, date, time, click on [Edit] button.After modifying click on [Save]8. When finish adding the “Job Lists” Click on the [Address Book] to add/select the IP address ofthe TVLog‐G3 System.9. Click on the [Connect] button to connect to the TVLog‐G3 system.10. Click on the [Upload] button to export the data into the TVLog. Click on the [Download] buttonto get the data from the TVLog to your PC for editing/backup.
- Operation:1. Select the single TV Channel or Multi-TV Channels in the [Layout and Channels] for playback.2. Select the “Date” and “Start” - “End” time for playback in [Date and Time]3. Select [Play] or [Play (full screen mode)] for video playback.
- Operation:1. Select the single TV Channel or Multi-TV Channels in the [Layout and Channels] for playback.2. Select the “Date” and “Start” - “End” time for playback in [Date and Time]3. Select [Play] or [Play (full screen mode)] for video playback.
- You can search by selecting the pre‐defined [Comment] assigned to a video clip.Operation:1. Select the TV Channel in the [Search Information Layout].2. Select desire “Comment” from the pre‐defined List.3. Select time period of interest by selecting [Start] – [End] Date parameters4. Click [Search]5. Video clips matching the search criteria will be listed along with TV Channel Name, Date andTime6. Double click on any clip for playback.7. If you want to export the search criteria results along with the TV Channel Name, Date, Timeand Comment detail to excel file Click on [Export] button, supply the file name and press theSave button. (prior to export the data you need to insert a USB thumb disk to save the files)
- You can search by selecting the [Program Name] previously importedOperation:1. Select the TV Channel in the [Search Information Layout].2. Select desire “Program” from the pre‐defined List.3. Select time period of interest by selecting [Start] – [End] Date parameters4. Click [Search]5. Video clips matching the search criteria will be listed along with TV Channel Name, Date andTime6. Double click on any clip for playback.7. If you want to export the search criteria results along with the TV Channel Name, Date, Timeand Comment detail to excel file Click on [Export] button, supply the file name and press theSave button. (prior to export the data you need to insert a USB thumb disk to save the files)
- You can search by selecting the [Job Name] previously imported.Operation:1. Select the TV Channel in the [Search Information Layout].2. Select desire “Job” from the pre‐defined List.3. Select time period of interest by selecting [Start] – [End] Date parameters4. Click [Search]5. Video clips matching the search criteria will be listed along with TV Channel Name, Date andTime6. Double click on any clip for playback.7. If you want to export the search criteria results along with the TV Channel Name, Date, Timeand Comment detail to excel file Click on [Export] button, supply the file name and press theSave button. (prior to export the data you need to insert a USB thumb disk to save the files)
- You can search by selecting the following Alarms: Audio Loss Video Loss Video Freeze4111.5 Search by A/V StatusPress [A/V Status] button on Main Screen under [Smart Search]You can search by selecting the following Alarms: Audio Loss Video Loss Video FreezeOperation:1. Select the TV Channel in the [Search Information Layout].2. Select desire “Alarm Type” from the menu List.3. Select time period of interest by selecting [Start] – [End] Date parameters4. Click [Search]5. Video clips matching the search criteria will be listed along with TV Channel Name, Date andTime6. Double click on any clip for playback.7. If you want to export the search criteria results along with the TV Channel Name, Date, Timeand Comment detail to excel file Click on [Export] button, supply the file name and press the
- Press [Playback] button on Main Screen and select [Single Player].
- You can add a pre‐defined “Comment” to a Clip at any time during playback.1. Select the Comment from the Menu List.2. Click on [Add] (Advance Player) or [Insert] (Single Player) to record the Comment to a Clip.
- Same as last slide
- Due to the security of the TV Monitoring System, Legal Copy, Ad’s certification, etc, TVLog useproprietary file format and encrypted MPEG4 technology for the recorded files. Else, the systemwill become unsafe and the files can be easily edited or manipulated by any operator.A Windows base TVLog Playback Software is saved into the DVD/USB, and automatically startsup when the DVD is inserted into the DVD‐ROM drive of any Microsoft Windows based PC.
- Operation:1. Use playback transport buttons to select the [Start] and [End] point for the Crop video file.2. To add the entire 5min video file to the burn list click on the video file and press the [Select]button. (TVLog‐G3 generate a video file every 5min)3. Repeat the steps to select more video / crop files before burning.4. Select the Burn Media device: [DVD] or External [USB] Thumb Disk.(Use USB FAT32 Formatted Disk)5. Once video files are selected, click on [Burn] to start the burning process.6. Due to the security of the TV Monitoring System, Legal Copy, Ad’s certification,Due to the security of the TV Monitoring System, Legal Copy, Ad’s certification, etc, TVLog useproprietary file format and encrypted MPEG4 technology for the recorded files. Else, the systemwill become unsafe and the files can be easily edited or manipulated by any operator.A Windows base TVLog Playback Software is saved into the DVD/USB, and automatically startsup when the DVD is inserted into the DVD‐ROM drive of any Microsoft Windows based PC.
- Operation:1. Use playback transport buttons to select the [Start] and [End] point for the Crop video file.2. To add the entire 5min video file to the burn list click on the video file and press the [Select]button. (TVLog‐G3 generate a video file every 5min)3. Repeat the steps to select more video / crop files before burning.4. Select the Burn Media device: [DVD] or External [USB] Thumb Disk.(Use USB FAT32 Formatted Disk)5. Once video files are selected, click on [Burn] to start the burning process.6. Due to the security of the TV Monitoring System, Legal Copy, Ad’s certification,Due to the security of the TV Monitoring System, Legal Copy, Ad’s certification, etc, TVLog useproprietary file format and encrypted MPEG4 technology for the recorded files. Else, the systemwill become unsafe and the files can be easily edited or manipulated by any operator.A Windows base TVLog Playback Software is saved into the DVD/USB, and automatically startsup when the DVD is inserted into the DVD‐ROM drive of any Microsoft Windows based PC.
- Press [Audit Log] button on Main Screen.System information and log will be displayed with date and time.Audit Log can be saved and exported to mobile storage media
- Adjustment bar is activated by pressing the button [Adjustment].Four video parameters can be adjusted for fine tuning the picture quality of each channel individually.Point and Left Mouse over the video frame means selecting that video channel for adjustment.Click the [Reset] button to return to default value for the selected video channel.Note that it will not reset all video channels at one time.Note: This feature should only be used when the video is aged or video signal is weak. Under normalsituation, these parameters should be kept unchanged. Default values can be set by pressing the [Reset]button.¡ Password is needed for this operation.
- Press [Audit Log] button on Main Screen.System information and log will be displayed with date and time.Audit Log can be saved and exported to mobile storage media