1. Instruction Manual Ver. 2
HR-N750FTP
● Table of Contents
Name and Use of each part- 1
Product Installation------- 2
How to Use the Product and Cautions -3
■ Thank you for purchasing the product. Product Configuration----- 4
■ After you read the instruction manual, Warranty--------------- 5
please use it.
■ Please keep the instruction manual
for future reference.
■ Duplication of this product is prohibited.

2. Name and Use of Each Part
■ Body ■ Body Slide Button
■ Suction Plate Holder
■ Rubber Grip ■ Suction Plate
■ Rubber for
removal body
■ Joint for fixing grip
■ Grip
■ Rubber for
removal grip noise
■ Gender Installation Hole ■ Grip Slide Holder
■ Body As the main body of the product, it prevents suction plate from
receiving direct sunlight and covers the each part with neat
appearance.
■ Rubber Grip
Rubber grips are moved about 10mm up and down and presses
the navigation/the cell phone not to stray from the subject grip.
■ Gender When user equips the cell phone, the hole is for equipping charge
Installation gender.
Hole
■ Body Slide After equipping the navigation/the cell phone, the button is for
Button fixing or disengaging it to move back and forth.
■ Suction When the navigation cradle is equipped on the dashboard, its role
Plate Holder is to hold the suction plate.
■ Suction Device for fixing the cradle on the dashboard.
Plate
■ Rubber for This is for reducing the frictional sound from the cradle when
removal driving.
body
■ Joint for Part to joint the body and the grip not to move.
fixing grip
■ Grip Grip is for safely fixing the navigation/the cell phone.
■ Rubber for Part to fix or to move the grip about 100mm up and down.
removal grip
noise
■ Grip Slide Device to reduce the noise from the grip shaking.
Holder
-2-

3. Product Installation
◆ Wipe the place for
◆ Dry the place perfectly.
installation clean with a wet
cloth or a wipe.
◆ Remove the release paper
from the suction plate.
Press Strongly
◆ After checking the suction plate
evenly located on the dashboard,
press strongly the body and turn the
holder clockwise to the end. Suction Suction
Release
Keep the Suction Place even
◆ If the suction has been finished
completely, push the body slide button Body Slide Button
and pull the grip to the maximum.
30mm Move
RELEASE
LOCK
◆ Turn the joint anticlockwise which
is between the body and the grip to
release fixing.
Fixing Release
◆ After positioning at the angle user
wants, turn the joint again to fix.
Fixing
-3-

4. Product Installation
◆ Push the body slide button again,
and push the grip into the body.
◆ If the front and rear position of the
grip has been fixed, turn the grip slide
holder anticlockwise at the bottom of
the grip to release fixing.
Fixing Release
◆ Hold the body not to shake, and
move the grip softly up and down to Up and Down
about 100mm
find the handy position.
◆ After finding the up and down
position, turn the grip slide holder
clockwise at the bottom and fix it.
Fixing
◆ If all the positions are fixed for
user’s convenience, put up the
navigation/the cell phone slowly with
its top part against the rubber grip
and install it. Up and Down
about 10mm
◆ In the case of installing on the
speaker hole or the curved place,
attach first the enclosed metal plate
3M taped, and install the suction
plate on the metal plate.
You can see the same effect.
-4-

5. How to Use the Product and Cautions
1. Cradle Suction
1-1 After checking the place on the dashboard for attaching cradle, and wipe cleanly with a wet cloth or a
wipe there.
1-2 Remove the release paper from the cradle suction plate.
1-3 To attach the cradle suction plate on the dashboard, turn the suction plate holder clockwise with
pressing the body strongly.
1-4. If the suction plate holder has been turned to the end, check it to attach perfectly by pulling the
body.
! Cautions
1) In the case of a dust or a foreign body at the place to attach on the dashboard, it prevents the cradle
from attaching perfectly.
2) If the place for attaching the cradle suction plate is not even or having a hole, suction will not be
finished.
3) Adsorptive power is so strong, there can be indentation on the dashboard, but it will be removed when
not in use.
4) Check the cradle is attached safely before driving, because the adsorptive power can be weakened if
the suction plate has been left in a high or low temperature for a long time.
5) Suction can not be made on the protruding part such as the speaker hole and the curved place.
2. Moving Grip Back and Forth
2-1 To move the grip back and forth, first push the body slide button to release the fixing of the body
and the slide.
2-2 With pushing the body slide button, set the holding grip where user wants by moving back and forth.
2-3 If the grip is positioned where user wants, release the body slide button to fix.
! Cautions
.
1) If the body slide button is not pushed, the grip will not move.
2) After releasing the body slide button, check the fixing by touching the grip.
-5-

6. How to Use the Product and Cautions
3. Adjustment of the Grip Angle
3-1 Turn the joint for fixing grip anticlockwise to release.
3-2 Take the navigation/the cell phone position for user’s convenience.
3-3 If user finds the right place, turn strongly the joint for fixing grip clockwise and fix not to move.
! Cautions
1) If user don’t fix the grip by turning strongly joint for fixing grip, the navigation/the cell phone can be
moved.
2) User can also use the hex wrench to fix the joint for fixing grip.
3) If user spins the angle of the grip consistently, tightened part can come loose.
4. Movement of the grip up and down
4-1 Turn anticlockwise the grip slide holder at the bottom of the grip to release fixing.
4-2 After releasing, hold the body not to shake and move the grip softly up and down.
4-3 After setting the position of the grip, turn the grip slide holder clockwise and fix it not to move.
! Cautions
1) If the grip slide holder doesn’t move easily, just move a little the grip up and down to be turned
completely.
2) If user moves the grip excessively under the grip holder fixed, the product can be damaged.
3) In the case of driving with the grip holder unfixed, noise can be generated by moving.
5. Navigation / Cell Phone
5-1 Grasp the navigation/the cell phone so as not to move the grip, and let its top part touch the rubber
grip.
5-2 Adding force slowly to the rubber grip direction, the rubber grip goes into the grip and then the
navigation / the cell phone will reach in good condition.
5-3 After installing the navigation/the cell phone, fix it in the best convenience and at the safe position
by fine-tuning.
! Cautions
1) The rubber grip can move about 10mm.
2) Please take notice, the product can fall off for the striking impact.
6. Maintain the Suction Plate
6-1 In the middle of use, if the adsorptive power weakens for the dust or the foreign body stuck on the
suction plate, just clean it with a wet cloth or a wipe. After natural drying, the adsorptive power can
be kept like the first time.
-6-

7. Product Configuration List
Navigation/ Cell Phone Cradle 1ea
Suction Compensation 3M double-sided tape 1ea, Suction Compensation Steel 1ea
3M
3M 3M 3M
3M 3M 3M 3M 3M
3M 3M 3M 3M 3M
3M 3M 3M
3M
hex wrench 1ea additional rubber for fixing
Suction Compensation Objects : a 3M double-sided tape and a steel will be delivered with being
attached to the product.
-7-

8. Warranty
Product Kropsson Cradle Model HR-N750 FTP
Date of
year month day
Manufacture
Warranty Period A year after date of purchase
Purchased from
Address
Date of Purchase
Name of
Customer
● This product is manufactured under strict quality
control and
inspection processes.
● When this product goes out of order under the normal
use of
customer, we will repair it free of charge during the
warranty
period.
● Please show us the warranty card when you ask for repair
service .
● Please keep the warranty card securely as it is not reissued.
Customer service : 2F, 100-16, Dodang-dong, Wonmi-gu, Bucheon-si,
Gyeonggi-do, Korea
Tel : + 82 + 32 - 684 – 0463~5 FAX : + 82 + 32 - 684 - 0467