Brownell Boat Stands and Carver Boat Covers Guide

TRAILERING 1011
Boat Stands Brownell 1012 - 1015
Boat Covers
Carver Boat Covers 1016 - 1020
Transhield Shrinkable Boat Covers 1021
Boat Cover Accessories 1022 - 1023
Trailering
Tie Downs 1022 - 1024
Trailer Jacks 1025
Trailer Winches 1026 - 1029
Trailer Lights 1029 - 1032
Trailer Wiring 1033 - 1035
Trailer Rollers 1036 - 1037
Trailer Parts 1037 - 1043
Trailer Locks 1043 - 1045
Keel Guard & Motor Supports 1046 - 1048
Motor Carriers / Launching Wheels / Dollies 1048 - 1049
Lettering / Totes 1049

®
The BrownellAdvantage:
The ABYC Standards and Technical Information Reports for Small
5 Boat Rock Road | Mattapoisett, MA 02739 | Tel. +1 508.758.3671 | Fax 508.758.3574 | Toll-Free (US & Canada) 1.800.533.8433
Safe. Reliable.
Legendary Durability.
Visit www.boatstands.com to find more information on Brownell Boats Stands products.
BEST QUALITY
BEST PRICE
Brownell Boat Stands offers a full range of boat storage and shop equipment.
BOAT STANDS BOAT RACKS DOLLIES

Would you do this under any
other boat stand but Brownell?
BROWNELL BOAT STANDS
“Professionals Choose Brownell”
by
by
Choose Only Authentic
Brownell Boat Stands
Compare Brownell Quality
with the competition:
Brownell
Solid
Center
Rod
Lifetime Warranty Don’t take a chance!
Steel
Handle
Cast
Handle
Hollow
Center
Rod
Others
MADE IN
USA

1014
TRAILERING
Brownell Adjustable Boat Stands
These strong, steel, adjustable stands eliminate the need for cumbersome cradles and wooden
shoring. Use wooden keel blocks to support the weight of the boat and Brownell stands to
stabilize. The stands nest together making storage easy.
Tops Only Length Top Style
BBS VEE TOP-16 16" Vee / Blue
BBS VEE TOP-22 23" Vee / Gray
BBS VEE TOP-27 27" Vee / Orange
BBS FLAT TOP-16 16" Flat / Gray
BBS FLAT TOP-27 27" Flat / Orange
BBS O-PLY Orange top pad only
Sailboat series
Part # Min / Max Height Length / Top Weight
BBS SB-1FL 64" / 79" 27" Flat / Orange 54 lbs
BBS SB-4FL 24" / 36" 23" Flat / Gray 30 lbs
BBS SB-1V 64" / 79" 27" Vee / Orange 54 lbs
BBS SB-4V 24" / 36" 23" Vee / Gray 30 lbs
Sailboat Stands
Part # Min / Max Height Length / Top Weight
BBS MB-0XFL 54" / 72" 27" Flat / Orange 46 lbs
BBS MB-0FL 41" / 58" 27" Flat / Orange 39 lbs
BBS MB-3FL 25" / 38" 23" Flat / Gray 34 lbs
BBS MB-4FL 18" / 25" 16" Flat / Blue 37 lbs
BBS MB-0V 41" / 58" 27" Vee / Orange 39 lbs
BBS MB-1V 33" / 50" 27" Vee / Orange 38 lbs
BBS MB-4V 18" / 25" 16" Vee / Gray 21 lbs
Motorboat Stands
Part # Min / Max Height Top Style Weight
BBS K-4 15" / 24" Flat 22 lbs
Keel Stands
Load rated: 10,000 each
Part # Type H x W x D Weight
BBS BRB16 Bow 16" x 24.5" x 30" 69 lbs
BBS BRB Bow 28" x 24.5" x 30" 69 lbs
BBS BRS36** Stern 31.5" x 36.5" x 30" 75 lbs
BBS BRS41 Stern 31.5" x 41.5" x 30" 75 lbs
** Limited Quantity
Bow / Stern Boat Rack Stands
Load rated: 13,000 lbs per set
BRS SeriesBRB
Motorboat series
Boat Stands
FLAT TOP 16FLAT TOP 27VEE TOP-16 VEE TOP-22 VEE TOP-27

1015
TRAILERING
Boat Stands
Brownell Molded Flat Top Pad
Mount to any Brownell stand or adjustable
trailer top
Provides drainage for moisture elimination
Fasteners included
BBS TLC-PAD
Brownell
H/D Hydraulic Stern Drive Jack
Adjusts on 3 axes to make stern drive removal
and installation an easy one man job
Weight: 175#
Lift Capacity: 1,000#
Lift Range: 19" x 34"
BBS SD-1**
** Limited Quantities
Part # Min / Max Height Top Style Weight
BBS KS1-V 20" / 33" V-Top 35 lbs
BBS KS1-FL 20" / 33" Flat-Top 35 lbs
BBS KV-TOP Orange Vee Top (keel series only)
BBS K-TOP Orange Flat Top (keel series only)
Brownell Stackable Keel Stands
Load rated: 10,000 each
Stackable for easy storage The following is a list of Do’s and Don’ts to insure that safety is not being
compromised. This list should in no way be construed as totally complete
rather should be in addition to safety precautions already taken.
1) Do not use boat stands to suspend a boat in mid-air.
2) Use blocking along center line of the boat to rest all the weight on.
3) Use the safety chains on all side sailboat stands, chaining the pairs
together from port to starboard.
authorized persons to move or adjust boat stands when in use.
5) Use a pair of boat stands, one placed port and one placed
starboard for each 8' of boat’s length.
heavy sailboats.
7) Never allow anything (such as canvas) to be tied to the boat stand.
9) In windy or open areas, remove masts when boats are
placed on boat stands.
10) Apply boat stands so the adjusting screw is as perpendicular
to the hull as possible when they are outboard.
11) Replace any boat stand that is damaged or rusted badly.
12) Keep screws greased.
13) If it is necessary to remove a boat stand from under a boat,
14) Do not use boat stands for jobs they were not intended for.
15) Do not use boat stands to hold boats up when in transit
(i.e. on a truck or trailer).
16) If boats are left on boat stands unattended for a long time,
they should be checked for security and locked.
17) Use plywood under boat stands if the ground is soft.
20) Do not place blocks on top of boat stands to increase their reach.
Brownell Pontoon Dolly
The safest, most convenient way to
display or repair pontoon boats
Ideal for show rooms, boat shows,
repair shops and storage
Three 4” x 2” phenolic wheels with casters – won’t scratch
High density foam surface protects against scratches
Capacity: 2,000 lb
Dimensions 19” x 19.5” x 9”
Weight 30 lb.
BBS PD-2
Brownell
Stern Drive Jack
Makes installation and removal an
easy one-man job
Height from ground: 18" to 46"
Capacity: 350 lbs
BBS SD-2

Joined seams are folded four-ply, no raw edges
Double stitch construction for added strength and durability
Weather resistant anti-wick thread used throughout construction
Double reinforced tie-down loops sewn into hem for the purpose of tying the cover down
Made in a state-of-the-art manufacturing facility in South Carolina using nearly 95%
domestically-produced component materials.
100% Marine-grade 8 oz polyester is strong and durable
Highest tear strength available
UV and mildew resistant with excellent resistance to fading
Extremely water repellent, yet breathable to help allow interior moisture to escape
5 Year Warranty
Made in USA
All our stock covers come in Poly-Guard gray
(see below for information ordering other colours)
* Trailerable boat covers must be properly installed
and tied down. (Tiedowns sold separately) See
boat cover accessories on page 1008.
Canadian Drop Ship Program
Carver Custom-Fit covers can now be drop-shipped directly to
you, the dealer, in 10-14 days from receipt of cover order at Carver.
This program now allows you to offer Carver's assortment of colour
and fabric combinations in Custom-Fit cover with NO STOCK.
Price Includes:
Brokerage and Freight
Search Carver's Online Selection Guide
cover part number.
www.carvercovers.com
Better known as “semi-custom” covers, Styled-to-Fit boat covers are the best selling, most
popular category of covers. The Styled-to-Fit boat covers are designed to accommodate
boat style. Styled-to-Fit boat covers are great for travel*, mooring and storage.
Motor covers are sewn into outboard model boat covers
Trailerable*

1017
TRAILERING
Carver V-Hull Runabouts - O/B
Cover accommodates hand/bow rails & windshields:
- 14’6” to 15’6” boats - up to 4” hand rails
- 16’6” to 19’6” boats - up to 8” bow rails
- Boats 20’6” and up - up to 11” bow rails
Attached motor cover
Outboards Centre Line Length Beam Width
CAR 77014P-10 14' 6" 74"
CAR 77015P-10 15' 6" 80"
CAR 77016P-10 16' 6" 86"
CAR 77017P-10 17' 6" 90"
CAR 77018P-10 18' 6" 96"
CAR 77019P-10 19' 6" 96"
CAR 77020P-10 20' 6" 102"
Carver V-Hull Runabouts - I/O
Stern Drives Centre Line Length Beam Width
CAR 77116P-10 16' 6" 86"
CAR 77117P-10 17' 6" 90"
CAR 77118P-10 18' 6" 96"
CAR 77119P-10 19' 6" 96"
CAR 77120P-10 20' 6" 102"
CAR 77121P-10 21' 6" 102"
CAR 77122P-10 22' 6" 102"
CAR 77123P-10 23' 6" 102"
Carver V-Hull Cuddy Cabin Boats - I/O
Cover accommodates bow rails:
- 18’6 to 20’6” boats - up to 11” bow rails
- Boats 21’6” and up - up to 24” bow rails
CAR 77719P-10 19' 6" 96"
CAR 77720P-10 20' 6" 102"
CAR 77721P-10 21' 6" 102"
CAR 77722P-10 22' 6" 102"
Carver V-Hull Fishing Boats
No Motor Hood - Wide Series
No Motor Hood Centre Line Length Beam Width
CAR 70112P-10 12' 6" 70"
CAR 70113P-10 13' 6" 72"
CAR 70114P-10 14' 6" 72"
CAR 70115P-10 15' 6" 74"
CAR 70116P-10 16' 6" 76"
Carver V-Hull Fishing Boats - Wide Series
Motor Hood Centre Line Length Beam Width
CAR 71112P-10 12' 6" 70"
CAR 71113P-10 13' 6" 72"
CAR 71114P-10 14' 6" 72"
CAR 71115P-10 15' 6" 74"
CAR 71116P-10 16' 6" 76"
CAR 71117P-10 17' 6" 85"
Carver Styled-to-Fit Boat Covers
boat illustration and description that best matches your boat.
Performance Poly-Guard® fabric
Gray in colour
styled-to-Fit cover part number.
Boat Covers

1018
TRAILERING
Carver V-Hull Fishing Boat w/Side Consoles
Coverage provided for bow mounted trolling motor and side
console with windscreen. Accommodates console hight to 14"
CAR 72216P-10 16' 6" 92"
CAR 72217P-10 17' 6" 92"
CAR 72218P-10 18' 6" 92"
Carver Jon Style Bass Boat
pedestal seats. Designed for single console. If motor is mounted
on a jack plate order one size larger
CAR 77814P-10 14' 6" 68"
CAR 77815P-10 15' 6" 70"
CAR 77816P-10 16' 6" 72"
CAR 77817P-10 17' 6" 74"
Carver Center Console Bay Style Fishing Boats
Covers up to 55” center console and up to 8” bow rails
CAR 71018P-10 18' 6" 94"
CAR 71020P-10 20' 6" 96"
Carver V-Hull Fishing Boats - Narrow Series
CAR 70122P-10 12' 4" 60"
CAR 70124P-10 14' 4" 68"
Boat Covers
Carver Open Jon Boats
CAR 74198P-10 10'6" 58"
CAR 74200P-10 12' 6" 58"
CAR 74201P-10 14' 6" 60"
CAR 74201EXP-10 14' 6" 72"
Carver Whaler Style w/Bow & Side Rails
a side or centre consol
CAR 71613P-10 13' 6" 70"
CAR 71614P-10 14' 6" 70"
CAR 71615P-10 15' 6" 78"
CAR 71616P-10 16' 6" 78"
CAR 71617P-10 17' 6" 78"

1019
TRAILERING
Boat Covers
No motor hood
No Motor Hood Centre Line Length Beam Width
CAR 7INF8BP-10 8' 6" 60"
CAR 7INF9BP-10 9' 6" 60"
CAR 7INF10BP-10 10' 6" 66"
CAR 7INF11BP-10 11' 6" 68"
No motor hood
Cover accommodates console hight up to 48"
1/4" draw rope encased in hem
Part # Centre Line Length Beam Widtho
CAR INFCC13DRP-10 13' 6" 78"
CAR INFCC14DRP-10 14' 6" 78"
CAR INFCC15DRP-10 15' 6" 81"
CAR INFCC16DRP-10 16' 6" 90"
CAR INFCC17DRP-10 17' 6" 98"
No motor hood
Part # Centre Line Length Beam Width
CAR 7INF8P-10 8' 6" 56"
CAR 7INF9P-10 9' 6" 60"
CAR 7INF10P-10 10' 6" 66"
CAR 7INF11P-10 11' 6" 68"
CAR 7INF12P-10 12' 6" 70"
CAR 7INF13P-10 13' 6" 74"
CAR 7INF14P-10 14' 6" 74"
CAR 7INF15P-10 15' 6" 76"
CAR 7INF16P-10 16' 6" 82"
Part # L x H x W Fits
CAR 70001P-10 21" x 21" x 13" MC-10 HP
CAR 70002P-10 25" x 21" x 13" MC-40 HP
CAR 70003P-10 25" x 26" x 19" MC-100 HP
CAR 70004P-10 30" x 40" x 24" MC-200 HP
CAR 70006P-10 30" x 40" x 24" MC-250 HP
CAR 70010P-10 16" x 11" x 11" Electric
Carver Motor Covers
Each motor cover has 1/4” draw rope sewn into
measure your outboard and determine those
dimensions that most closely match your particular
model
Performance Poly-Guard fabric - Grey
Carver Universal Centre Console Covers
Console covers provide protection for
the console, electronic equipment and
controls. Additionally, the new design
now accommodates the forward console
seat. A heavy-duty adjustable strap system
shock cord in the hem.
Performance Poly-Guard fabric - Grey
Part # Centre Line Length Beams Up To
CAR 84002-10 Medium D: 45 x W: 36 x H: 46"
CAR 84003-10 Large D: 50 x W: 40 x H: 60"

1020
TRAILERING
Carver
Bimini Top Brace Kits
Bimini top braces are specially
designed to hold your top up
and out of the way when top
is folded and not in use. Each
package contains 2 aluminum
braces which can be cut down
to the desired length, 2 deck
hinges, 2 unique hinged jaw slides that make installation easy
by eliminating the need to disassemble the main bow. All screws
necessary for mounting are included. 1 pair per package
48" Brace kit (Aluminum) 62010
22" to 44" Adjustable brace kit (Aluminum) 62014
CAR 62010 48"
CAR 62014 22" to 44" adjustable
Carver Buggy Style Pontoon Top Frame Kit
Frame ONLY - Ready to assemble
Top height: 48"
Top length: 8'
Fits deck widths: 96" or 102"
CAR 50510
Carver 2 Bow Round Tube Bimini Top Kits
Ideal for: V-Hull Fishing Boats, Jon Style Bass Boats,
Top height: 42"
Top length: 5'6"
Performance Poly-Guard fabric
Part # Fits Widths
CAR V4247U 47" to 53"
CAR V4257U 53" to 62"
CAR V4267U 63" to 73"
CAR V4278U 74" to 84"
Boat Covers
Carver Universal Tower Top
Universal tower clamps accommodate a wide range of tower
diameters from 1-7/8" up to 2-3/8" making these tower bimini
among the easiest to install. Available in premium Sunbrella 100%
marine acrylic with matching zippered storage boot and 7/8" heavy-
wall anodized aluminum tubing. Each tower bimini comes standard
with one set of tower clamps, high grade domestic black nylon
No need to drill into towers
Fits widths 74" to 82"
36" high and 5' long
CAR A2678UBD-02 Black
Carver
available in Hypalon® and PVC/Vinyl. Kits will
accommodate any size Carver round tube bimini top. Each kit
contains 4 D-Rings, 2 universal deck hinges, special adhesive and
detailed instructions
CAR HPKIT Hypalon
CAR VLKIT PVC/Vinyl

1021
TRAILERING
Boat Covers
PWC - Large
TRA F1075.1 121"-140"
Pontoon Universal
TRA F1063 20', 4' height
Over Wake Tower
TRA F10520 16'-18' Standard
TRA F10519 18'-20' Standard
TRA F1083.1 20'-22' Standard
TRA F1079 20'-22' Forked nose
V-Hull
TRA F1050 14'-16'
TRA F1051.1 16'-18'
TRA F1052 18'-19'
TRA F1053 19'-21'
TRA F1054 21'-23'
TRA F4556.0 23'-25'
TRA F1055.0 25'-27'
Transhield Shrinkable Boat Covers
Patented fabric removes water vapor, keeping boat dry
Reusable up to two storage seasons
Reusability offers the ability to remove cover to work on
boat during off season
No tape applied to boat, making removal quick and easy
Suitable for transport
Transhield Boat Vents
Transhield offers snap-together boat vents and
adhesive boat vents. The snap-together boat
vent provides a watertight seal and allows 1.5
TRA P0076 Snap vent
TRA P0360 Adhesive vent
Transhield Accessories
TRA M0400 Zipper door cover, W: 33" x H: 28"
TRA SPL 3/4" webbing, 2100' spool
TRA T0488 2" patch tape, white hull, 108'
TRA T0496 4" patch tape, white hull, 108'
Transhield Heat Tool Kit
Rapid shrink heat tool kit includes:
Heat tool body (Self-igniting)
25' propane hose
Adjustable regulator
Carry case
Safety glasses & gloves
Training CD
TRA G0300 Heat tool
Transhield is a
patented alternative to
conventional wrapping
shrink-wrap products,
vibration during transport
is a leading of cause of
Transhield virtually eliminates the problem with its
unique non-abrasive non woven layer.
without causing moisture damage, allowing boats
to be stored outdoors until they have been sold and
can be used by the customer for up to two years
after the sale. Transhield transportation and outdoor
custom storage covers can be tied to boats for easy
removal and inspection by the dealer...or the buyer.
The Shrinkable Fabric for Superior
Shipping and Storage Protection
of Protection

1022
TRAILERING
Garelick Boat Cover Support Pole
Keeps weather covers tight
Eliminates pockets that trap water
Three style tips - rubber, pin for grommets,
dot fasteners - Snap on
Anodized aluminum resists corrosion
30” to 60”
GAR 94320
Carver Rope Ratchet
No more fumbling with knots to secure your cover
or elastic straps that come loose. The rope ratchet
allows you to tighten your cover to proper tension then
releases with a convenient thumb lever. Accommodates
CAR 61020
Carver
Support Pole Kit w/Vent
Replace a conventional support pole with
one that provides an air vent to reduce
moisture, heat and mildew under the cover.
Includes a 4 piece adjustable (22 to 70")
anodized aluminum pole, boat vent and
simple installation instructions.
CAR 60002 Pole kit w/vent
Parts:
CAR VENT II Vent only
Carver
Support Pole Kit
Anodized aluminum construction
Keeps weather covers tight
Eliminates pockets that trap water
4 piece adjustable (22 to 70")
Pole has a snap and vinyl end
CAR 60000 Pole kit only
Accessories:
CAR VENT II Vent only
Carver Boat Cover Support System
Eliminates all possible areas
that could collect water and
allow it to pool. This system
is designed for simplicity with
two pre-installed, adjustable
20-foot straps that snap quickly
to the rear tow hooks and one
40-foot adjustable strap to
two systems can be easily joined to create a "frame" for the boat
cover. Each system comes with one adjustable (22" to 70") support
pole with snap and vinyl end, system center, strap set and simple
installation instructions.
CAR 60008
Taylor
Support Pole Kit
This fully adjustable support pole is 3 support
poles in one. Come with a male canvas snap,
a grommet tip, and a plain end cap. So, if you
have a female canvas snap or a grommet on
your boat cover, you can get a support that will
work with your cover. The pole is aluminum, with a durable
plastic adjuster to set the correct height for your cover.
TAY 11992
VICO Boat Cover Vent
Boat Vent II is fast and easy to install and can
be added to virtually any custom or semi custom
cover. Just follow the included instructions and
use the supplied template to quickly and easily
install the vent in your cover.
VCO BV2 BLK
VICO Boat Cover Poles
Tested to hold up to 170 lbs
Die cast collar and stainless steel components
Aluminum tubing is anodized, heat treated, and has a
Fully synthetic TPR rubber grey bottom crutch tips
3 tip options: snap, swedge, or plug
VCO X28A-2 TIP 28"
VCO X47A-2 TIP 47"
VCO X59A-2 TIP 59"
VCO X70A-2 TIP 70"
VICO Ratchet Tie Downs
To use, just tug on the rope until it is tight,
and tie off the remaining rope. To release, pull
on the rope the same as when tightening it
and release the trigger lock.
Lightweight, durable and extremely tough
Micro 1/8" Ratchet
Includes 6' of 1/8" rope and hook
VCO RAR-16-011 Use 1/8" rope
1/4" Ratchet
VCO RATCHET-1/4 Use 1/4" rope RATCHET-1/4
Boat Cover Accessories

1023
TRAILERING
Epco Gator Tuff Transom Tie Downs
2" wide weather-resistant polypropylene webbing
Vinyl coated black hook, zinc plated 'S' hook and hardware
Easy-lock over centre painted buckle
with hook and loop pad to protect
surfaces and secure loose ends
Max load: 800 lbs
EPC PTTD-2 2” x 2’, 2/pkg
EPC PTTD-4 2” x 4’, 2/pkg
Epco Gator Tuff Transom Tie Downs
2" wide weather-resistant
polypropylene webbing
Heavy gauge zinc plated hardware
and self-tightening, easy-lock over
centering buckle
Hook and loop pad to protect surfaces
and secure loose ends
Max load: 1200 lbs
EPC BTDT-2 2” x 2’, 2/pkg
Epco Gator Tuff Transom Tie Downs w/Vinyl Pads
2" wide weather-resistant polypropylene webbing
and vinyl coated hooks
Easy-lock over centering buckle
with large coloured vinyl pad to
protect surfaces
Hook & loop to secure loose ends
Max load: 1200 lbs
EPC BTDTP-2 2” x 2’, 2/pkg
EPC BTDTP-4 2” x 4’, 2/pkg
Epco Transom Tie Downs
4' stainless adjustable transom ratchet
1” wide weather-resistant nylon webbing
Vinyl coated hooks, stainless quick
release and rapid ratchet mechanism
Max load: 1200 lbs
EPC TR-4S 2/pkg
Epco Gator Tuff
Transom Tie Downs - Retractable
Permanently mounted to your trailer
Mounting bolts included
Easy lift release
Rubber grip handle
Spool mode
48" overall length
EPC 415 48", 2/pkg
LifeSafe Boat Cover Repair Tape
Prolong the life of your boat cover
Adds strength and tear-resistance along seams,
stress points, creases and corners
Extra strong tape resists stretching, wrinkling
and tearing
LIF RE1136 8-3/4" x 10'
Sea-Dog Deck Mount Bow Socket
Recessed base design allows for a water tight seal
without the use of gaskets.
SED 327410-1
Sea-Dog Rail Mount Bow Socket
the use of fasteners. The rail mount bow sockets
aid in assembling a rounded support structure for
a cover and can be easily removed from the boat
when the cover is not in use.
SED 327400-1
Carver Boat Cover Reinforcement/Repair Kit
This repair kit is an ideal way to prolong the life
of your boat cover. Kit includes one yard self
adhesive material. Use it to add extra padding
to stress points from windshields, trolling
motors, etc. or to patch wear areas and tears that
may develop over time. Simply cut to desired
size and apply to clean, dry surface
CAR 61050
Carver Boat Tie Down Kit
when trailering. Constructed of heavy-duty 1" black
polypropylene webbing and convenient quick-release
buckles. Unlike bungee cords, these durable tie-downs
don't stretch, so they won't tear your cover or damage
your boat. Each kit contains twelve 8-foot straps.
CAR 61000
Tear Aid pg 430
Boat Cover Accessories / Tie Downs

1024
TRAILERING
Tie Downs
Epco Gator Tuff Ratchet Strap
1” x 15’
Stainless ratcheting handle
4000 lbs test webbing
EPC R15S Each
Boatbuckle
S/S G2 Transom Tie Down - Retractable
Sleek contour styling
Comfortable SUR-Grip rubber coated handle and
release lever
One-touch web release
Strong-3,000 lb./pair rated capacity
Easy access dual release lever
Simple, one hand operation
Adapts to any mounting
BOB F14256 2/pkg
Epco Gator Tuff Gator Skins
A long lasting protective panel made of high
durability plastisal
Easy to use, just slide strap through
slits provided on cushion for adjustable
protection anywhere on the strap
Fits webbing 1”, 1 1/2”, & 2”
EPC PAD-2 2/pkg
Epco Gator Tuff
Gunwale Tie Downs
2" wide nylon webbing
Captive 'J' hook
Self-tightening, easy-lock over centering buckle
Hook & loop pad to protect surfaces and secure loose ends
Max load: 1200 lbs
EPC BTD0P 2” x 10’, 2/pkg
BoatBuckle Transom Tie Down - Retractable
Retractable transom tie-down
Self-storing retractable 2" wide
strap which can be extended to a full 48"
High impact boot and protective plastic coating on the S hook
Ratchet snugs tight with an easy one hand operation
Submersible and water resistant
BOB F08893 2/pkg
Epco Gator Tuff
Ratchet Cam Buckle
High strength-low elongation, 100%
polyester, for maximum cut and abrasion
resistance
2 x 15’ ratchets with rubber padded
handle
2 x 6’ cambuckles also rubber coated
EPC R66525
Epco Utility Tie Downs
1-1/4" x 16' tiedowns with rubber coated
ratchets and hooks
100% polyester straps
Rated capacity: 2,500 lbs
EPC R66033 2/pkg
Sea-Dog Strap Guards
Injection molded nylon
SED 756012-1 For 1-1/2" straps, each
SED 756020-1 For 2" straps, each
Fulton Gunwale Ratchet Tie Downs
Vinyl coated J-hooks
Sold each
333 lbs load capacity &
1,000 lbs break strength
FUL 2060866 2" x 10'
FUL 2060966 2" x 13'
FUL 2061066 2" x 16"
FUL 2061166 2" x 20"
Fulton
Transom Tie Downs - Retractable
2" x 43"
Sold in pairs
FUL 2060266 Stainless steel
FUL 2060366 Steel

1025
TRAILERING
Fulton Eclipse Economy
Swivel Tongue Jacks
Fast, easy swivel jack operation
Factory assembled mounting bracket provides
for quick and easy trailer installation
Provides up to 10" of travel
Zinc plated steel tubing
Grease nipple for gear lubrication
Fits trailer tongues up to 3" x 5"
FUL EJ1000-0101 1000 lb
FUL TJ1200-0101 1200 lb
Parts:
FUL 6811-S00 6" wheel kit
FUL 0933301-S00 Handle kit, XP10
FUL 0933305-S00 Handle kit, XP15
FUL 0933306-S00 Bevel gear kit
FUL 0933302-S00 Gear kit, XP10
FUL 0917514-00 XP15 replacement cap
Part #
A
B
Wheel
DiaMin Max
FUL XP10-0101 12.75" 22.75" 10.5" 6"
FUL XP15-0101 12.75" 22.75" 12.5" 8"
FUL XPD15L-0101 12.75" 24.75" 14.5" Dual 6"
Fulton Swivel Tongue Jacks
Factory assembled mounting bracket provides
for quick and easy trailer installation
Heavy duty zinc plated steel tubing
Fits trailer tongues up to 3" x 5"
FUL XP10-0101 1200 lb, bolt-thru, 6"
FUL XP15-0101 1500 lb, bolt-thru, 8"
Mount uses 3-D formed heavy gauge steel
stamping and a proprietary bushing material for
support
1500 pound capacity caster jack
Dual 6" rally wheel for easier castering
FUL XPD15L-0101 1500 lb, bolt-thru
Fulton F2 Fixed Jack w/Footplate
2,000 lb capacity
HD 7" articulating cast footplate
13" of swivel mount height adjustment
Sidewind handle with hold-up feature
10" screw travel
9/16" pull pin
Bolt on for 4" & 5" frames
FUL 1413-23-0134
Parts:
FUL 500134 Handle/crank kit
FUL 0933306S00 Bevel gear kit
FUL 500277 Weld-on plate 3-1/2 x 4-1/2
FUL 500135 Gearbox cover plate
Trailer Jacks
Fulton Fixed Jacks w/Footplate
Zinc plated, high strength, steel square tube, drop
foot trailer jacks
A 5/8" pin allows for quick height adjustment
4" x 6" foot plate
All necessary hardware is included for quick
installation with common hand tools
Fits on trailer tongues up to 3" x 5"
Side wind handle
Part # Min Max Clearance
Max
Load
FUL HD2500-0101 7.0" 35.50" 19.00" 2500#
FUL HD5000-0101 6.50" 35.00" 18.50" 5000#
Fulton F2 Performance Trailer Jacks
Precision extruded aluminum alloy inner and outer
tubes combined with twin alignment bushings for
Integrated pull pin with an ergonomic grip for simple,
quick and easy positioning.
10" screw travel
8" mount travel
9/16" pull pin diameter
1600 lb capacity
Parts:
FUL 500130 Twin replacement wheel kit (Includes 2 wheels
& all necessary mounting hardware)
FUL 500131 Single replacement wheel kit (Includes 1 wheel
& all necessary mounting hardware)
FUL 500138 Twin track wheel only
FUL 500134 Handle/crank kit
FUL 0933306S00 Bevel gear kit
FUL 500136 Replacement pull pin
FUL 500320 XP To F2 Adapter plate
Twin Tracks
7” diameter wheels roll independently
for easy turning. The 5-1/2" total wheel
base adds superior stability.
3" x 4" pivot
For 3" x 3" & 3" x 4" frames
FUL 1413-02-0134 Twin
4" x 5" pivot
For 3" x 5" frames
FUL 1413-13-0334 Twin
Single Track
8" diameter, 3" wide wheel provides a
sturdy working platform.
3" x 4" pivot
For 3" x 3" & 3" x 4" frames
FUL 1413-04-0134 Single

1026
TRAILERING
Trailer Winches
Fulton Trailer Winches
environments. Winch drums are drilled for use with winch straps. High carbon SAE 1050 steel gears to resist wear and last longer. Heavy
duty rib reinforced frames maintain proper gear alignment for longer life. Internally lubricated drum bushings and oil impregnated shaft
bushings provide permanent lubrication to keep the cranking easy. Each model is engineered with mechanical advantages to keep handle
effort low for smooth, easy operation.
Single Speed Trailer Winches
The easy to use "grabber" one-way ratchet, free wheels in off position on T600 and T900. Easy to use two-way ratchets bring the rope into
either the top of drum, or the bottom to hold bow of boat down on T1100 through T1801. Heavy duty frame strengthening cross shaft on
T1501 through T1801 maintains ratchet alignment under heavy loads.
Part # Capacity Gear Ratio Handle
Mech.
Adv. Ratchet Rope Strap Hub Handle
FUL T600 0101 600 lb 3.1:1 6" 34:1 Grabber 1-way 36' x 1/4" 15' x 2" 5/8" 5868
FUL T900 0101 900 lb 3.1:1 7" 39:1 Grabber 1-way 36' x 1/4" 15' x 2" 5/8" 6312
FUL T1100 0101 1,100 lb 4.1:1 7" 43:1 2-Way 30" x 5/16" 20' x 2" 3/4" 6312
FUL T1300 0101 1,300 lb 4.1:1 8" 49:1 2-Way 30' x 5/16" 20' x 2" 3/4" 6302
FUL T1500 0101 1,500 lb 4.1:1 8" 49:1 2-Way 20' x 5/16" 20' x 2" 3/4" 6302
FUL T1500Z 0101* 1,500 lb 4.1:1 8" 49:1 2-Way 20' x 5/16" 20' x 2" 3/4" 6302
FUL T1602 0101 1,600 lb 5.1:1 9" 56:1 2-Way 20' x 7/16" 20' x 2" 7/8" 6822
FUL T1801 0101 1,800 lb 5.1:1 10" 62:1 2-Way 20' x 7/16" 20' x 2" 7/8" 6817
*Comes complete with a 20' x 2" strap
Note: If you are pulling a load use a trailer winch and if you are lifting a load use a brake winch.
Two Speed Trailer Winches
One fast speed for quick pull in, the other slower speed pulls heavy loads easily. Fulton two speed winches
allow changing speed, without changing handles. Shift lock holds shaft in the desired gear ratio. Just lift the
lock and move shaft to change speed. Free-wheeling without a spinning handle makes for safer operation.
Neutral position for quick line payout without spinning the handle. 2-way ratchet pawl also has neutral
position. Zinc plated for superior corrosion resistance. Optional hand brake kit, No. 1619 available for all
models. Brake is purchased separately and can be installed after winch is mounted.
Part # Capacity Gear Ratio Handle Mech. Adv. Rope* Cable* Hub Handle
FUL T2005 0101 2,000 lb 4.1:1 & 9.8:1 10" 87:1 20' x 7/16" - 1" 6817
FUL T2605B 0101 2,600 lb 5.1:1 & 12.2:1 10" 108:1 24' x 7/16" - 1" 6817
FUL T3205 0101 3,200 lb 5.1:1 & 12.2:1 10" 79:1 - 185' x 7/32" 3/4" 6312
Fulton Winch Parts
FUL 0133306-S01 Ratchet Kit, T11/13/1500
FUL 1598S01 Ratchet Repair Kit, T1602/1605/1802/1805
FUL 0133301-S01**Ratchet Kit, XLT14Z
FUL 0133303-S01 Pinion shaft kit T1602/T1801
FUL 1514S01 Ratchet Kit, T600, 900, 1000, 1200
FUL 1562S00 Ratchet Kit, T2005, 2605,B, 3205
FUL 5621P-01 Wire Cable Keeper Kit (pkg)
FUL 6302P-01 8” Handle, Offset (pkg)
** Limited Quantity
FUL 6312P-01 7" Handle, Offset T900/1000A/1100
FUL 6817P-01 10” Handle, Offset (pkg)
FUL 9235P-01 10” Handle, Dogleg (pkg)
FUL 6822-01 Spare Handle, T1602
FUL 5868P01 6" Handle, Offset T600
FUL 0133303-S01 Pinion Shaft Kit, T1602/1801
FUL 0133302-S00 Pinion Shaft Kit, XLT14Z
FUL 1619-01 Optional Hand brake Kit
T600 T1100 T1500Z T1602

1027
TRAILERING
Trailer Winches / Winch Straps
Fulton Automatic Brake Winch
Single speed automatic brake winch
Whether raising or lowering a load, the double disc automatic
brake system provides the needed control for load security
Brake design also allows payout of line with no load on the
winch
Oil impregnated bushings, 15.8:1 gear ratio and 11" comfort grip
handle allow for low handle efforts under load
Heavy-duty reinforced frame maintains
gear alignment under load improving life
cycle performance
Zinc plating provides superior corrosion
resistance
2500 lb capacity
Includes cable keeper
11.13" x 7.13" with 11" handle
FUL K2550 0101 2500 lb
Fulton KX Work Deluxe Brake Winch
Self-activating automatic brake winches hold the load securely
when the crank handle is released
No minimum line load is required to activate the brake or pay
out cable from the winch
Drum hubs are 10 times the recommended
cable size to maximize cable life
Plated gear covers for improved gear train
protection and a dual ratchet system
Rated pull: 700-1,500 lbs
Max cable: 1/4"
Drum storage: 70'
Gear ratio: 5.1:1
11" handle
FUL KX1550 0101
Fulton F2 Trailer Winches
Completely enclosed design
Adjustable 6" - 9" handle
Single or dual gear drum 5.1:1 & 3.17:1
Handle mounts left or right side
20' strap with hook
Mounting hardware included
FUL FW2000-0101 2000 lb single speed
FUL FW3200-0101 3200 lb 2 speed
Epco Gator Tuff Winch Straps
Wide nylon webbing with heavy duty snap hook, zinc
plated to resist weathering. Winch strap comes with or
without sewn loop on the end.
2" x 20'
Max load 4000 lbs
EPC WSL20N Looped end
EPC WS20 Standard
Fulton F2 Trailer Winch
Completely enclosed design for a sleek, strong stylish look
Two piece corrosion resistant aluminum frame
One piece corrosion resistant aluminum handle
Dual gear drum operates smoothly
Switchable from left to right hand drive
Handle is easily adjustable to 6" or 7"
Soft ergonomic grip
Features 'Easy Install System' E.I.S.
Includes strap and mounting hardware
6.25" x 6.254" x 8.5"
7.85 lbs
FUL FW1600-0101 1600 lb
Tie Down Winch Cables
Galvanized steel 7 x 19
Zinc plated, forged latch, 7000 lb. hook
TIE 59385 3/16" x 25' 4200#
TIE 59390 3/16" x 50' 4200#
TIE 59395 7/32" x 25' 5600#
Parts:
TIE 50640 Replacement hook
Trailer winches haven’t changed much in the last 100 years.
The revolutionary Sky Winch is the opposite of traditional
winches and eliminates the hassles and dangers of trailering.
Simply leave a bow-line attached to your boat and
walk it to your trailer without wading in.
Then just place rope into SkyWinch, pull tight,
and start cranking. The Patented wheel grips
the rope and easily pulls most lighter-weight
boats under 18’. The crank arm will not spin
backwards until released with trigger for
controlled payout.
most standard trailers with included
mounting bracket & hardware
For best results, use with 1/2” solid-braid
rope with break-strength rating that exceeds boat weight
GRN SKYWINCH
Fulton Winch Straps
Black nylon web 2" x 20' winch strap
with hook
2,600 lb maximum working load
FUL WS20 0700 Each
FUL WS20 DP0200 12/pkg
Heavy duty 2" x 20' yellow winch strap
with sewn loop and hook
10,000 lbs breaking strength
FUL WS20HD0600 Each

T H E B E S T - I N - C L A S S T R A I L E R P R O D U C T S L E A D E R

1029
TRAILERING
Wesbar
Waterproof Side Marker/Clearance Lights
Mini LED light
Single wire. self grounding
1/4" stud mount
2-1/8" x 1-1/8" x 1-1/16"
WSB 401565 Amber
WSB 401566 Red
Trailer Lights
Wesbar Waterproof
Side Marker/Clearance Lights
Constructed of tough polycarbonate
Bulb is contained in a waterproof compartment
Comes with a pre-installed 15" lead wire
Used as a combination side marker and clearance light, when
Stud mount: 2-1/8" x 1-1/8" x 1-1/16"
Ear mount: 3-5/16" x 1-5/16" x 1"
WSB 203233 Amber stud
WSB 203234 Red stud
WSB 203285 Amber ear
WSB 203286 Red ear
Wesbar
Waterproof Side Marker/Clearance Lights
Waterproof LED clearance/side marker
light designed for easy installation.
Snap lock base mount
2-7/8" x 1-1/2" x 1"
WSB 401580 Amber
WSB 401581 Red
Parts:
WSB 221588 Grommet
Endurance Davit Winch
304 stainless frame, drum, fasteners, cable and hook
Designed for use in salt water enviroments
Rated: 2000 lb line pull, 600 lb
direct lift
Power in-out with freewheel
clutch
Hand held remote
1.5 HP, 153:1 gear ratio
5/32" x 35' stainless cable
Weight: 20 lbs
END EMD2000SS 12VDC
Endurance Utility Winch
General use utility winch
Rated: 2000 lb line pull
Power in-out with freewheel option
Hand held remote
3/16" x 50' galvanized aircraft cable
Complete with battery cable
12.24" x 4.53 x 4.3"
Weight: 16.5 lbs
END EU2000 12VDC
Endurance Utility Winch
General use utility winch
Rated: 3000 lb line pull
Power in-out with freewheel
clutch
Automatic load-holding brake
Hand held remote
Drum Dia: 1.34" x L: 3.2"
3/16" x 50' galvanized aircraft cable
Complete with battery cable
12.6" x 4.72" x 4.3"
Weight: 21.2 lbs
END EU3500 12VDC
Wesbar
58 Series Side Marker/Clearance Lights
Snaplock base mounts
4" x 2" x 1"
WSB 401585 Amber
WSB 401586 Red
Wesbar Waterproof
Side Marker/Clearance Lamps
Sonically sealed, break resistant polycarbonate lens and housing
insure a waterproof module. Meets requirements for both side
marker and clearance lamp when properly mounted.
Snap lock base mount
2-7/8" x 1-1/2" x 1"
WSB 203292 Amber w/Black base
WSB 203293 Red w/Black base
Parts:
WSB 203395 Amber light module
OPT MC90 AS Amber light module
WSB 203396 Red light module
OPT MC90 RS Red light module
WSB 221588 Grommet
Wesbar
Waterproof Side Marker/Clearance Lamp
Waterproof LED clearance/side marker
"tongue" lights. Excellent for boat trailer
tongue lighting. Snap-on lens with black
or white bases. Two wire construction with
either notched wires or molded single bullet and barrel.
Tested to FMVSS/CMVSS 108 requirements
2.62" x 1.83" x .83"
WSB 47-222012 Amber w/Black base

1030
TRAILERING
Trailer Lights
Wesbar
Light Bars
For boat trailers 80" or more in overall width
Three waterproof LED lamps on 6" centres
Stainless steel bar,.molded polycarbonate lights
Comes pre-wired with a 60" lead
L: 14-1/4" x H: 1-3/16" x D: 1-1/16"
WSB 401567 Packaged
WSB 47-99-004* Bulk
* Request
Wesbar License Plate Bracket
These cost effective plastic brackets are
easily mounted to Wesbar trailer lights.
1/4" mounting holes on 2" centres
WSB 003211 Black
WSB 003213 White
Wesbar Side Marker/Clearance Lights
Meets applicable DOT-108 lighting standards for clearance /
marker lamps when properly mounted (“PC” Rated).
“Quick Connect/Disconnect Wiring”
Bulbs and lenses are easily replaceable
Stud mount
L: 2-1/4" x H: 2-1/4" x D: 1-1/4"
WSB 203235 Amber
Parts:
WSB 003340 Replacement amber lens
SPE 57 Spare bulb
Wesbar
Features hidden mounting hardware with “Snap Fit” lens
Bulbs and lenses are easily replaceable
Features Wesbar’s “Quick Connect/
Disconnect Wiring”
L: 3-3/4" x H: 2-1/4" x D: 15/16"
WSB 203263 Amber
Parts:
SPE 194 Spare bulb
backs which bond to virtually any smooth,
clean surface.
L: 3-1/4" x H: 1-1/2"
WSB 003357 Amber
WSB 003358 Red
Wesbar
For boat trailers 80" or more in overall width
Three waterproof lamps on 6" centres
L: 14-1/2" x H: 1-1/8" x D: 1"
WSB 203315
Wesbar Replacement Lenses
Lenses for old style waterproof tail light series 403028/403078
Left hand unit includes plate light lense
Includes screws
WSB 281594 Right hand
WSB 281595 Left hand
281595
Wesbar
Quick Connect/Disconnect wiring method
Lenses are easily removed for quick replacement
Black housing
Stud mount
3-1/8" x 2-3/8"
WSB 203111 Amber
WSB 203113 Red
Parts:
ANC 520057 12V .24 amp bulbs (2/pkg)
Wesbar
The best light bar available for
boat trailers 80" or more in overall width
Three waterproof lamps on 6" centres
L: 16-1/2" x H: 1-3/8" x D: 1-1/2"
WSB 203309
Parts:
WSB 203396 Red replacement module

1031
TRAILERING
Trailer Lights
Wesbar Waterproof
Sealed Recessed Tail Light
Red Stop/Tail/Turn light
Sonically sealed polycarbonate lens and
housing
Oval grommet & 3-way plug
Meets DOT standards for stop, turn & tail lamps
L: 6-1/2" x W: 2-1/4" x D: 2-3/8"
WSB 403080
Parts:
WSB 403085 Replacement sealed light module
WSB 401591 Grommet & 3 wire connectorWesbar
Waterproof 'Over 80' Wrap-Around Tail Lights
Waterproof surface mount tail lights
Wrap-around design eliminates the
connector and ring terminal ground
wire
Stainless steel mounting hardware included
Meet FMVSS/CMVSS 108 requirements
7.53" x 3.48" x 3.13"
WSB 271594 7-function, right/curbside
WSB 271595 8-function, left/roadside
Wesbar
Waterproof 3" x 8" Tail Lights
acrylic lens sonically sealed to base
(assures watertight seal). Complies
with all DOT requirements for over
80" trailers when mounted properly.
LED lights are rated at 100,000
hours. Light functions include stop,
turn and tail lights. Left side light includes license plate
illuminator. Plated steel hardware included.
8" x 2-7/8" x 2-3/4"
Wesbar
Waterproof 3" x 8" Tail Light Kit
Kit contains:
1 right 7-function & 1 left 8-function tail light
1 Plastic license plate bracket
4' wire harness
Hardware & install instructions.
Display packaged
WSB 407540
Wesbar
Waterproof 4" x 6" Tail Lights
lens sonically sealed to base (assures
watertight seal). Complies with all DOT
requirements for over 80" trailers when
mounted properly. LED lights are rated at
100,000 hours. Light functions include stop, turn and tail
lights. Left side light includes license plate illuminator.
Plated steel hardware included. Includes a 3 wire 90°
pigtail.
6" x 3-1/2" x 2-1/4"
Wesbar
Waterproof 4" x 6" Tail Light Kit
Kit contains:
1 right 7-function & 1 left 8-function
tail light
4' wire harness
Hardware & install instructions
Display packaged
WSB 407560
Wesbar
Waterproof 6" Oval Grommet Mount Tail Light
Red Stop/Tail/Turn light
Horizontal mount
Waterproof grommet mount
LED illumination
L: 6-1/2" x H: 2-5/16" x D: 7/8"
WSB 401584 Light
WSB 106873 Mounting bracket
WSB 416088 Grommet
Light shown with grommet
Optronics
Waterproof Aero Pro Over 80” Combination
Tail Lights
Waterproof universal mount
stop/turn/tail lights for over 80"
applications
All-weather molded plastic housing and durable lens
protect against corrosion
STL36 is 7-function: stop, turn, tail, rear clearance, rear
STL37 includes license illuminator as well
L: 7-7/8" x W: 2-7/8"
OPT STL36RS Right hand - 7-function, right/curbside
OPT STL37RS Left hand - 8-function, left/roadside

1032
TRAILERING
Trailer Lights
Wesbar Deluxe Submersible 'Over 80' Tail Lights
Durable acrylic lens sonically sealed to base (assures watertight
seal). Submersible using the reliable “Bell Jar” principle.
mounting bolt pattern. Complies
with all DOT requirements for over
80" trailers when mounted properly.
Easily replaceable bulbs. Plated steel
hardware included.
W: 6" x H: 3-1/2" x D: 2-1/4"
WSB 403025 8-function left/roadside
WSB 403075 7-function right/curbside
Wesbar Deluxe Submersible
'Over 80' Tail Light Kit
Kit contains:
1 right & left-hand tail light
2 Standard amber side lights
4' 4-way trunk connector with ground
Quick connect/disconnects & installation instructions
Display packaged
WSB 407515
Wesbar 'Under 80'
Tail Light Kit
Kit contains:
4' 4-way trunk connector with
ground
Quick connect/disconnects &
installation instructions
Display packaged
WSB 407500
Wesbar 'Under 80' Tail Lights
Universal 2" on center stud mounting.
Screw-on main and side marker lens allow
for easy bulb replacement. This tail light is
designed for a variety of under 80"
light-duty trailers. Wiring uses the quick
connect and disconnect feature.
4-3/4" x 4-1/2" x 2-9/16"
Parts:
WSB 2423286 Replacement red tail light lens
Wesbar Submersible 'Under 80' Tail Lights
Submersible tail lights are designed to protect the bulbs
and contacts when the trailer is under water
during launching and loading.
Gasketed lenses are replaceable
12" pre-installed wire leads
Two 1/4" mounting studs on 2" centres
Black housing, display packaged
5-1/4" x 4-7/16" x 3-3/4"
Parts:
WSB 2423286 Replacement red tail light lens
Wesbar Submersible
'Under 80' Tail Light Kit
Kit contains:
4' 4-way trunk connector with ground
Quick connect/disconnects &
installation instructions
Display packaged
WSB 2527511
Wesbar Waterproof
These tail lights feature a sealed
lamp capsule that protects the
bulb and electrical contacts from
damage. Life expectancy of the
bulbs in the replaceable capsule is 2,900 hours. These units
serve seven basic functions - tail light, stop light, turn signal,
clearance light. The left hand light has a built-in license plate
and come with 15" pigtails. Black housing. Display packaged.
L: 8" x H: 2-7/8" x D: 2-3/4"
WSB 403026 8-function left/roadside
Parts:
WSB 403348 Replacement capsule
WSB 403336 Replacement lens set
Wesbar Waterproof
Kit contains:
2 waterproof over 80” tail lamps
2 sealed amber side marker lamps
License plate bracket
25’ wishbone wiring harness
4’ trunk connector
Hardware & install instructions
WSB 007509
FYI
Multi-Function Lights

1033
TRAILERING
Trailer Wiring
Wesbar harnesses conform to all applicable SAE, NMMA and TMA
standards to provide years of dependable service.
WSB 007257
WSB 707250
WSB 707282
WSB 767940
WSB 787195
WSB 787196
787195
767940
707282
707250
Wesbar Trailer Light Adapters
007257
Sierra
T-Connect Trailer Connector
T-trailer connectors come with a standard 4 pole
90% of all trailers today. If you connect to a
7-way RV plug use one of these adapters.
SIE TC44984
Fulton
Plug to Plug Adapter
Checks for electrical connectivity
Displays connection with blue LED's
Attached dust cover
FUL 78118
Fulton Plug Adapter
For vehicles with trailer lamp-out sensors, such
as: Audi, Mercedes-Benz and Volkswagen
vehicles with a factory tow package
FUL 20141
Sierra Trailer Connector Converter
7 way to 4 connector adapter
with a tow vehicle equipped with a 7-pole RV
style blade trailer connector. No cutting, splicing,
or tracing wires. Plug in connection makes
connecting the two different connectors a snap.
Adapts many late model factory "prewired" vehicles (including
Jeep, Ford Truck and Winnebagos) to the more commonly used
SIE TC42914
Sierra Trailer Connector Adapter
6 way to 4 connector adapter
with a tow vehicle equipped with a 6-pole
round trailer connector. No cutting splicing
or tracing wires. Plug in connection makes
connecting the two different connectors a snap.
SIE TC42904
SIE TC51300
SIE TC50000
Sea-Dog Trailer Connector Adapter
SED 753874-1

1034
TRAILERING
Trailer Wiring
Sierra Connectors
12" long wire leads on male and female sides
Molded waterproof bodies
Colour coded wires
Polarized
Precision terminals
Bubble packed on cards
SIE TC43634 2 pole
SIE TC43654 4 pole
Sierra 4-Pole
Trunk Trailer Connection Kit
Complete kits containing connector
with hardware, mounting bracket,
wire and splice connectors.
SIE TC43764**
** Limited Quantity
Sierra 'Y' Harness
Flat 4 pole 'Y' connector
Consists of: 4' vehicle side connector, 25'
trailer side connector, splice connectors, and
wire clips
Trailer side wires are split to allow routing of
wires down both sides for easy hook up
Safe colour coded wires
SIE TC43744
Sierra
4-Way Wiring Harness Kit
connector
Consists of: 4' vehicle side connector, 25'
trailer side connector, splice connectors, and wire clips
Trailer side wires are split to allow routing of wires down
both sides for easy hook up
Safe colour coded wires
SIE TC43754
Sierra
Electronic Trailer Light Converter
Allows cars with separate stop and signal
lamps (most imports and many late
model domestics) to tow trailers with the
"normal" combined stop/signal lamps
Eliminates the need for additional lamps
on the trailer or time consuming rewiring of trailer
Comes with bare wires for splicing into existing harness
SIE TC43504
Sierra
Female 4-Pole Connector
48" colour coded wires
Bubble packed on cards
SIE TC44094
Sierra 4-Pole Connector
coded wires. Bubble packed on cards.
SIE TC44054
Fulton Flat Trailer Connector
Coiled 14 gauge cable available with either
Cable extended length to 11 feet
FUL 54000-026 4 way
FUL 54000-027 5 way
Pico Trailer Hook-Ups
Pre-wired molded trailer connectors,
male & female with 12" loop wire
Cut and splice into wiring assembly
All sets are polarized & colour coded
PIC 1871BP 2 Pin 16 ga. connector
1873BP
1871-73BP
1872
Sierra Boat Plug Tester
Plugs into tow vehicle and LEDs illuminate to show
if connections are correct and working.
Tests tail, stop/turn and ground.
SIE TC42884
Wesbar Plug Testers
WSB 767941
WSB 51-767811 6 way-round tester w/LED lights
WSB 767943 7-way blade tester/emulator

1035
TRAILERING
Trailer Wiring
Wesbar Wiring Accessories
Designed for the Do-It-Yourselfer market,
these trailer wiring kits are easy to install.
Comes with complete instructions.
707254
Wesbar
4-Way Extension Harness
2' double ended 4-way.
(Flat wire car & trailer ends).
WSB 707254
707270
Wesbar
4-Way Trailer Harness
18" ground.
WSB 707270
707103
Wesbar
4-Way Trailer Harness
harness kit w/hardware, 3' ground w/4'
car end, 18" ground.
WSB 707103
707272
Wesbar
4-Way Car End Harness
WSB 707272
707285
Wesbar
4-Way Trailer End Harness
18" ground.
WSB 707285
707275
Wesbar
WSB 707275
707286
Wesbar
18" ground.
WSB 707286
702305
Wesbar
4' auxiliary.
WSB 702305
707273
Wesbar
6' auxiliary.
WSB 707273
702405
Wesbar
18" ground, 18" auxiliary.
WSB 702405
707255
Wesbar
5-Way Extension Harness
Double ended 5-way 2', cord.
WSB 707255
707283
Wesbar
harness, 4' ground, 4' auxiliary.
WSB 707283
Wunside Harness
Wishbone Harness
Trailer End
Car End

1036
TRAILERING
Trailer Rollers
Yates Boat Trailer Bow Rollers
Non-marking black rubber
Part # O.D. Width Shaft Size
YRP 3143-4 3" 3-1/8" 1/2"
YRP 4174-4 3-1/2" 3-3/4" 1/2"
Yates Boat Trailer Ribbed Roller
OD: 5", W: 3"
Insert: nylon, Shaft: 3/4"
YRP 530R-6PS
Yates Boat Trailer Spool Rollers
OD Flange: 3", OD Centre: 2"
Part # Length Insert For Shaft Size
YRP 4163-4P 4" Plastic 1/2"
YRP 5203-4P 5-1/4" Plastic 1/2"
YRP 5203-5P 5-1/4" Plastic 5/8"
YRP 8302-4P 7-5/8" Plastic 1/2"
Yates Boat Trailer Rocker Roller
OD: 4-1/4", W: 4-1/4"
Insert: Zinc chromated washer
Shaft size: 3/4"
YRP 440R
Yates Side Guide Roller
Length: 12"
O.D. Flange: 2-1/2"
For shaft size: 5/8"
YRP 12243-5
Yates Boat Trailer Y Stops
Part # Base Span For Shaft Size
YRP 4Y22-3 2" x 2" 4" 3/8"
YRP 6Y33-4 3" x 3" 6" 1/2"
YRP 7Y44-4 4" x 4" 7" 1/2"
Yates Boat Trailer Keel Rollers
Part # Length
O.D.
Flange
O.D.
Centre
For Shaft
Insert
YRP 5213-5 4-7/8" 3" 1-1/2" Steel Sleeve
YRP 5213-5P 4-7/8" 3" 1-1/2" Plastic Sleeve
YRP 8000 7-3/4" 3-3/8" 2-3/8" Nylon End Cap
YRP 12000 11-3/4" 3-3/8" 2-3/8" Nylon End Cap
YRP 155EC
Replacement bushings for the 8000 and 12000 series rollers.
Fulton Bunk Carpeting
Protection from scratches & abrasions using this
black weather resistant marine carpeting.
FUL CR8008 8" x 12'
FUL CR8012 12" x 12'
Yates End Cap
O.D.: 3-1/2", W: 1-15/16"
YRP 134-5
Tie Down Engineering Wobble Roller
Black polyvinyl construction
Length: 4-1/8" x Dia: 4"
Shaft size: 3/4"
TIE 86428

1037
TRAILERING
Trailer Rollers & Parts
Tie Down Engineering Keel Rollers
These polyvinyl chloride with UV inhibitors rollers have non
marking assurance built in and will not put any marks on your
boat. These rollers will outlast rubber rollers, are shock resistant
and extremely cut resistant.
Amber # Black # Description Length x Dia. Shaft
TIE 86289 TIE 86402 3” - Roller Bow 2-7/8" x 3" 1/2" 1
TIE 86290 - 3” - End Bell 1-1/4" x 4-1/2" 1/2" 2
TIE 86143 - 3” - Roller Assembly w/End Bells 5-1/2" x 4-1/2" 1/2" 3
TIE 86287 TIE 86400 4” - Roller, Bow 3-3/4" x 3-5/8" 1/2" 4
TIE 86288 - 4” - End Bell 1-5/8" x 5-1/8" 1/2" 2
TIE 86142 - 4” - Roller Assembly w/End Bells 7-3/8" x 5-1/8" 1/2" 3
TIE 86284 TIE 86406 4” - Keel Roller - Spool Type 3-1/2" x 2-3/4" 5/8" 5
TIE 86158 TIE 86407 5” - Keel Roller (center guided) 4-1/2" x 3-1/2" 5/8" 6
TIE 86283 TIE 86408 5” - Keel Roller - Spool type 4-3/4" x 3" 5/8" 7
TIE 86159 TIE 86409 8” - Keel Roller 7-1/2" x 3-1/2" 5/8" 8
TIE 86169 TIE 86410 10” - Keel Roller 9-1/2" x 3-1/2" 5/8" 8
TIE 86199 - 12” - Keel Roller 11-1/2" x 3-1/2" 5/8" 8
TIE 86198 - 3.5" - End Caps 1-1/4" x 3-1/2" N/A 9
Amber # Black # Description H x W x D Shaft
TIE 86291 - 15" x 3.5" - Keel Pad 1-1/4" x 15" x 3-9/16" N/A 10
- TIE 86420 2" - “V” Bow Stop 3" x 3-3/4" x 2" 1/2" 11
TIE 86285 TIE 86413 3" - “V” Bow Stop 3-1/8" x 6-1/8" x 2-3/4" 1/2" 12
- TIE 86421 4" - “V” Bow Stop 3-3/8" x 7" x 4" 1/2" 13
#2
#3
#9
#10
#11
#13
#1
#4
#5
#6 #7
#8
#12
Tie Down Engineering
Wobble Roller Kit
K-kits include (4) 5” ribbed amber
rollers, 7/8” & 1.15” bushings, hog ring
& washers.
TIE 86144 Ribbed, Amber
Tie Down Engineering Roller Shaft & Pal Nuts
TIE 86025 Roller shaft 1/2" x 5-1/4" with 2 pal nuts
TIE 86305 1/2" pal nuts 4 per card
TIE 86310 5/8" pal nuts 4 per card
TIE 86300 1/2" pal nuts 50 per box
TIE 86301 5/8" pal nuts 50 per box
Tie Down Engineering Hex Head Bolts
Use for mounting brackets, couplers and
winch stands
Grade 5, zinc plated steel
Kit contains four bolts, washers and nylock
nuts
TIE 86253 3/8" x 3"
TIE 86254 3/8" x 4"
TIE 86255 3/8" x 1"
TIE 86256 7/16" x 1"
TIE 86257 1/2" x 3-1/2"
Tie Down Engineering Lug Nuts & Bolts
TIE 81172 1/2" lug nuts, 5/pkg
TIE 81170 1/2" lug bolts, 5/pkg

1038
TRAILERING
Fulton Bearing Life
Wheel Bearing Protectors
Provide permanent protection against
damage from water and dirt entering the
wheel bearings.
Maintains correct internal pressure
Chromed steel construction
Covers are vinyl
Sold in pairs
FUL BPC198-0604 1.98" (covers included)
FUL BPC178-0604 1.78" (covers included)
FUL BP232S-0604 2.328" (w/o covers)
FUL BP244S-0604 2.441" (w/o covers)
FUL BB178-10112 1.78" (covers only)
FUL BB198-00112 1.98" (covers only)
FUL BB244-10112 2.328" / 2.441" (covers only)
Bolster Brackets
Designed to support bolster or bunk
boards
Slotted for vertical adjustment and
feature non-slip dimples to avoid
movement and increase load capacity
TIE 81210 8" with 2-3/4" slot w/swivel bracket 2/pkg
TIE 81250 12" with 4-3/4" slot 2/pkg
TIE 81195 8" with 2-3/4" slot 2/pkg
TIE 81200 10" with 3-3/4" slot 2/pkg
Tie Down Engineering Trailer Parts
Precision tapered roller bearings (bulk)
TIE 81304 1-1/16" bearings - 2/pkg
TIE 81305 1-1/16" cups - 2/pkg
Precision tapered roller bearing kits. Each kit includes: 2 cones,
2 cups, seal, cotter pin and dust cap where noted.
TIE 81110 1" bearings
TIE 81111 1" bearings w/dust cap
TIE 81115 1-1/16" bearings
TIE 81116 1-1/16" bearings w/dust cap
TIE 81125 1-1/4" bearings
TIE 81126 1-1/4" bearings w/dust cap
TIE 81140 1-3/8" x 1-1/16" tapered bearings
TIE 81141 1-3/8" x 1-1/16" tapered bearings w/dust cap
TIE 81167 1.98" dust caps only, 2/pkg
Bunk, Swivel & Keel Brackets
Bunk Bracket
11gauge hot dip galvanized steel
Slotted for vertical adjustment to standard
or deep V hulls
TIE 81225 9-1/2" long with 6" slot
TIE 81230 12-5/8" long with 9-1/8" slot
Split Brackets
Accommodate any size roller length
Slot allows vertical adjustment for
stabilizing boat on trailer
Slots accept 7/16" or 1/2" bolts. Use 1/2" or
5/8" roller shafts
Sold in pairs
TIE 81235
Bolster Brackets
Use with adjustable for proper angle of
bunk or bolster boards
Swivel bracket c/w 1/2" x 1" bolts with
nylock nuts per pair
TIE 86160
Offset Brackets
Adjustable mount on tongue for keel support
Assembled version comes complete with 4"
rubber roller for 2" wide tongue
Max. depth: 6"
TIE 86121
Tie Down Engineering U-Bolt Kits
Use for mounting brackets to trailer frames
Zink Plated Steel
Sold in pairs
TIE 86205 1/2" x 3-1/8" x 3" Square
TIE 86206 1/2" x 3-1/8" x 4" Square
Galvanized Steel
Sold by the each
TIE 86220 7/16" x 1-9/16" x 3-9/16" Square
TIE 86221 1/2" x 1-9/16" x 4-1/16" Square
TIE 86222 1/2" x 3-1/16" x 3-13/16" Square
TIE 86223 1/2" x 2-1/16" x 4-13/16" Square
TIE 86224 3/8" x 1-3/4" x 4-13/16" Round
TIE 86225 1/2" x 2-3/8" x 5-3/8" Round
Trailer Parts

1039
TRAILERING
Tie Down Engineering "G5" Stainless Steel Trailer Disc Brakes
Stainless steel rotor with venting holes & all aluminum caliper
Large single, bi-metal piston design
Ceramic pads with stainless steel backing plates
Swivel brake line connector
Stainless steel caliper pins with oil impregnated bronze bushings
Vented caliper housing
Square o-ring with slant edge
Lifetime limited warranty
Requires 2 per axle
Part # Description Rotor Diameter Hub Capacity Hub Bearing size Hub Bolt Pattern
TIE 82091
3500 lb Axle, for 13, 14 & 15" wheels
Replaces 10" drum brakes
9.6" x .3125" 1750 lbs 1-1/16" & 1-3/8" 5 @ 5.5"
TIE 82092
6000 lb Axle, for 14 & 15" wheels
Replaces 12" drum brakes
11.75" x .3125" 3000 lbs 1-1/4" & 1-3/4" 6 @ 5.5"
8209282091
Eliminator Vented Disc Brakes
Stainless Steel caliper slide pins are easily accessible with
7/16” hex heads for quick removal
GalvX coated brake pad backing plates further reduce areas
susceptible to corrosion
faster than traditional cast iron calipers
Compact design allows short axle overhangs and provides
direct brake line routing back to the axle
Oil impregnated bronze bushings last longer and slide smoother
Oversize rubber boot is 50% thicker by design and provides a
more positive piston withdrawal
TIE 82113 10” "Integral" style brake kit
81103 82084
Tie Down Engineering Trailer Parts
Super Lube Hub Kits
Bearing and hub cavity 100% pre-greased. Greased seal and bearings are pre-assembled.
Kit includes bearings, seal, super lube dust cap, cotter key and lug nuts or lug bolts.
Part # Bearing Size Description
TIE 81015 2 ea 1" w/lug nuts 4 Stud Super Lube hub kit (1250#)
TIE 81040 2 ea 1-1/16" w/lug nuts 5 Stud Super Lube hub kit (1350#)
TIE 81045 1 ea 1-1/16" & 1-3/8" w/lug nuts 5 Stud Super Lube UHI hub kit (1750#)
Parts:
TIE 81168 Replacement dust caps, 2/pkg
TIE 81174 Replacement rubber cap grommet, 2/pkg
Hub Kits
Kit includes bearings, seal, dust cap, cotter key and lug nuts or lug bolts. Factory pre-greased.
Part # Bearing Description
TIE 81050 2 ea 1" w/bolts 4 hole/bolt hub kit (1250#)
TIE 81060 2 ea 1" w/lug nuts 4 Stud hub kit (1250#)
TIE 81065 2 ea 1-1/16" w/lug nuts 4 Stud hub kit (1350#)
TIE 81080 2 ea 1" w/lug nuts 5 Stud hub kit (1250#)
TIE 81085 2 ea 1-1/16” w/lug nuts 5 Stud hub kit ( 1350#)
TIE 81090 1 ea 1-1/16"&1-3/8" w/lug nuts 5 Stud UHI hub kit
Parts:
TIE 81167 Replacement dust caps 2/pkg
Parts:
TIE 46304A Caliper assembly w/pads
TIE 81100 S/S brake pads (4/pkg)
TIE 82084 Eliminator vented rotor pads (4/pkg)
Accessories:
TIE 81103 Reverse backing solenoid kit
Trailer Parts

1040
TRAILERING
Tie Down Engineering 10" Brake Kit
Kit comes with everything needed to replace trailer drum or
disc brakes for faster stopping power
Disc brake actuator features cast ball clamp, oversized master
Includes pair of GalvX coated vented rotor disc brakes, disc
brake actuator, brake line kit and free backing solenoid
TIE 82405
Trailer Drum Brakes
A highly corrosion resistant drum brake.
The GalvX system is composed of
inorganic polymers which bond metallic
Aluminum wheel cylinder
Stainless steel springs
Brake pads are bonded and riveted with bronze
rivets to backing plate
Superior saltwater performance over standard
drum brakes
TIE 81097 10" Galv-x drum brake assembly L & R (pair)
TIE 81004 5-Bolt, 10" Drum hub only, with cups & studs (each)
81004
81097
Tie Down Engineering Brake Flush Kit
Easy to install and easy to use
Adapts to all trailers
TIE 81107
Tie Down Engineering Model 66 Brake Actuators
An all aluminum master cylinder incorporates the shock absorber
into the cylinder assembly providing the operator with a warning
volumes to run both tandem and tri-
Other features include:
For trailers to 6,600 lbs capacity
Cast ball clamp
Extended latch lever
Exterior emergency safety cable lock and release
Vinyl coated coiled emergency stop cable
Safety lock pin with back up position
*Available for disc or drum brake applications.
* For 2" trailer ball only
TIE 82400 Disc brake unit
TIE 82401 Drum brake unit
Trailer Parts
Tie Down Engineering Flexible Brake Line Kit
lines are ideal for disc brake installation
requirements. Connects from brake caliper
to female end of brake line or can be connected to existing steel
lines. Flexible line connection required on G4 disc brakes.
TIE 81099
Flexible Hydraulic Brake Line Kits
Designed to be used on trailers using
either surge brake actuators or power
brake actuators (vacuum/hydraulic, air/
hydraulic, electric/hydraulic). Brake
approved for use on all trailer brakes
Add disc or drum brakes to your trailer. All hardware included, you
supply the actuator and brakes. The "Add On" Axle Kit must be
used with the Single Axle Kit. The Tandem Axle Kit combines both
Single Axle and "Add On" Kits into one package
This brake line kit is designed to be used to replace existing brake
lines or installed on a trailer that has not had brakes before
Kit includes:
2-Union "T" connectors, 2 "T" clamps, 8-self taping screws & 4 cable clamps
TIE 80326
"Add On" Axle Kit to be used with the Single Axle Kit.
2-Union "T" connectors, 2 "T" clamps, 8-self taping screws & 2 cable clamps
TIE 80327
All in one kit includes hardware for tandem axle trailers.
TIE 80328
Hitch Cables & Safety Chains
Replace your noisy chains with self-coiling hitch cables
Available plain or vinyl coated
Both use durable galvanized aircraft cable construction
Hitch cables exceed SAE J684 standards for trailer coupling and
automotive type hitches
TIE 59533 Black vinyl 36" rated Class 1 2000# trailer
TIE 59535 Galvanized 36" rated Class 2 3500# trailer
TIE 81202 3/16" x 31" zinc plated rated Class 2 trailer (2pkg)
TIE 81203 1/4" x 31" zinc plated rated Class 3 trailer (2pkg)
TIE 81255 Rubber “S” Hook safety chain keepers 2/pkg
81255
59533 81202

1041
TRAILERING
Trailer Parts
Fulton Economy Spare Tire Carrier
Lock a spare tire to the trailer tongue
to keep it neatly out of the way and to
prevent theft
Heavy duty 1/2" diameter zinc plated
construction
Fits 8", 9", 12", 13", 14" and 15" wheels
with 4 or 5 lug rims
FUL ETC0101
Heavy duty bolt-on
12" - 14" spares with 4 & 5 lugs
FUL 581902** Heavy duty
** Limited Quantity
Fulton Heavy Duty Spare Tire Carrier
Fulton HD Spare Tire Carrier
Fits trailer wheels up to 16-1/2"
Provides 4-3/4" lift and over 7” of offset
Fits trailer tongue up to 3” wide by 5”
high
protection
Easy bolt-on installation, no cutting or
drilling required
All mounting hardware and instructions included
FUL HDSTC0101 4, 5 & 6 bolt lug
Fulton Spare Tire Carrier
Welded and reinforced steel plate
construction
Hot dip galvanized
Provides 4-5/8" lift and over 5” of offset
Fits all trailer tongues up to 3" wide by 4" high
Complete with zinc plated mounting hardware
FUL STC 100 0101
Tie Down Engineering Side Mount Tire Carrier
5 lug wheels
Offset height raises tire and provides
additional ground clearance
Security holes provide for optional
cable and lock (not included)
Hot dip galvanized for lasting
protection
Fits all trailer tongues up to 3” wide by
4” high
Extra heavy duty welded steel construction
TIE 86098
Fulton Fold-Away Hinge Kits
Reduces trailer tongue length by up to 36"
Install on existing trailer tongue
Corrosion resistant zinc plated steel
All mounting hardware included
FUL HDPB330101 3" x 3" tongue
Max gross trailer weight: 3,500 lbs
Multi-angle extendable step system for boat trailers.
Preset angles 22, 45, 67 and 90
Extend, retract from 16" to 22"
Quick lock secure pin
High tensile extruded 6061
aluminum construction
Anti-skid step surface
Step platform: 14" with 3" tube
Stainless steel hardware
300 lb capacity
MKG FLEXSTEP Each
Megaware Adjustable Trailer Step
Fulton Boat Roller Guides
Non-marring cushioned rollers prevent
protection
Stainless steel pins hold rollers in
position to maintain hull contact under all loading conditions
Fits all trailer frames up to 3" wide and 5" high
FUL BGR200101 Height 20", pair

1042
TRAILERING
Heavy Duty Guides
48” high PVC pipe guides your boat on
safely and gives you visual aid when
backing an empty trailer
Non-marking PVC pipe is braced inside
with metal tubing going 20” up the tube
All hardware is included and is hot dip
galvanized for corrosion protection
TIE 86103 Pair
Fulton Boat Guides
Non-marring marine grade PVC
frames up to 3" wide and 5" high
FUL GB440-101 Height 44", pair
FUL GB150-0100 Height 50", pair
Bunk Board Guide Ons
Carpeted bunk boards
Bunk placement if mounted above
frame is 19"
Outside of the frame there is 5"-11"
of side movement
U-bolts and nuts are zinc plated
Mounting hardware is galvanized for
corrosion protection
Fits frames 2" & 3" wide up to 4" high
Sold in pairs with all hardware
included
TIE 86123 2' kit
TIE 86124 5' kit
86123
86124
Pontoon Trailer Guide Ons
Adjustable sight of 24" - 36"
When the trailer is submerged, the
PVC guide rises upward adding an
additional 12" of sight
Bright orange end caps
Designed to be mounted between the
pontoons
Made of 1-1/2" square, 16-gauge steel
galvanized tubing and covered by
2" x 20" PVC pipe
Guide posts extend fully into the
PVC tube for additional strength
Fits cross members 2" x 2", 2" x 3" and 2" x 4"
All mounting hardware included
TIE 86468
Fulton Towing Starter Kit
Kit includes:
Standard ball mount - 2" drop, 3/4" rise, 8-1/2"
long
Chrome hitch 2" ball, 6,000 lb
Pin and clip included
Ball and ball mount are attached
FUL 83563-002
Fulton Fas-Lok Straight Tongue Couplers
Proven Fulton Fas-Lock locking levers
hook up quickly and easily and feature a
heavy duty safety latch and padlock hole.
Designed for 1-7/8" or 2" ball sizes
Class I or Class II trailers with
2" or 3" tongue widths
Part #
Fits
Ball Size
SAE
Class
Trailer
GVW.lbs
Tongue
Mount
Width
FUL 11200-0101 1-7/8" I 2,000 2"
FUL 11300-0101 1-7/8" I 2,000 3"
FUL 22200-0101 2" Il 3,500 2"
FUL 22300-0101 2" Il 3,500 3"
Fulton Ball Mounts
Use with most 2" x 2" square receivers
For 1" shanks
Pins and clips sold separately
The mounts meet or exceed Vehicle
Equipment Safety Commission and V-5
standards
Part # Length Drop Rise Rated Finish
FUL 21342 8-1/2" 2" 3/4" 7,500 lbs Black
FUL 21344 9" 4" 2-3/4" 6,000 lbs Black
FUL 21346 9-1/2" 6" 4-3/4 6,000 lbs Black
Parts:
FUL 63240 5/8" pin set f/2" ball mounts
Fulton Ball Mount
1-piece solid forged construction
Use with most 2" x 2" square receivers
For 1-1/4" shanks
Rated: 16,000 lbs
Pins and clips sold separately
The mounts meet or exceed Vehicle Equipment Safety
Commission and V-5 standards
Part # Length Drop Rise Rated
FUL 21330 8-1/2" 2" 1" 16,000 lbs
Trailer Parts

1043
TRAILERING
Trailer Parts & Locks
Fulton Chromed Hitch Balls
Solid steel hitch balls are engineered to meet all
safety requirements of VESC regulations V-5.
When installing hitch balls: torque all 3/4" shank
balls to 160 ft. lbs., all 1" to 250 ft. lbs., and
1-1/4" shank balls to 450 ft. lbs. Always use the
properly rated hitch ball for your towing system.
Part # Ball Max. Trailer
Shank
L x Dia
FUL 63880 1-7/8" 2,000 lbs 1-1/2" x 3/4"
FUL 63884 1-7/8" 2,000 lbs 2-1/8" x 1"
FUL 63882 1-7/8" 2,000 lbs 2-3/8" x 3/4"
FUL 63887 2" 3,500 lbs 1-1/2" x 3/4"
FUL 63889 2" 3,500 lbs 2-3/8" x 3/4"
FUL 63909 2" 7,500 lbs 2-1/8" x 1"
FUL 63908 2-5/16" 7,500 lbs 2-1/8" x 1"
FUL 63896 2-5/16" 12,000 lbs 2-3/4" x 1-1/4"
Sea-Dog Two Piece Coupler Lock
Zinc, brass plated construction
L: 1-11/16" x W: 1-13/16"
Lock opening: 3/4"
SED 751030-1
Sea-Dog Coupler Lock w/Stainless Pin
Brass construction
L: 2" x W: 1-1/2" x D:5/8"
Lock opening: 9/16"
SED 751020-1
Trimax Premium Universal Coupler Lock
Large 6 tooth 3/8” locking lug system
Provides 360° of hardened steel protection
Ballistic nylon housing absorbs blows and
provides weather protection
Key hole cover slides closed to
protect from dirt
TMX UMAX100
Trimax Universal Coupler Lock
Provides 360° of hardened steel protection
Reinforced armoured shoulder guard resists
hammer strikes and saw cuts
Key hole cover protects from grime & dirt
TMX UMAX50
Fulton Universal Coupler Lock
FUL 63226
Trimax Coupler Lock
Secures couplers with up to a 7/8” span
Easy 1/4 turn locking
Hardened steel 1/4” pin
Internal O-ring and weather proof cap to seal
out dirt
Protective rubber cover on body prevents noisy
rattle & abrasion
TMX TMC10
Sea-Dog Coupler Locking Pin
Made from electro-galvanized steel
L: 3" x W: 1-13/16"
Pin diameter: 1/4"
SED 751010-1
Trimax Coupler Locks
Fits couplers 7/8", 2-1/2" to 3-1/2"
Features 1/4 turn technology that cannot be false locked
O ring keeps water, grime and dirt out of locking mechanism
Type A key which is a spring loaded, 7 pin, high security key
thqat will not bend or break
Resists attempted drill outs
TMX TC123 Chrome plated machine hardened steel
TMX SXTC123 Stainless steel
Trimax Chromed Hitch Ball
Double tow ball. 2" & 2-5/16" with 1" shank
Torque to: 250 ft. lbs
Weight rating: 10,000 lbs
TMX TDBC22516
Trimax RAZOR Adjustable Tow Hitches
Black powder coated forged steel
Stainless steel or powder coated face
10,000 Lbs tow rating, ball limited
1500 Lbs max tounge weight
Contains free keyed alike 5/8 receiver lock, T3
Adjusts in 1" increments
Hitch balls not included
Stainless Face
TMX TRZ6SFP 6" drop or rise
TMX TRZ8SFP 8" drop or rise
Powder Coated Face
TMX TRZ6PB 6" drop or rise

1044
TRAILERING
Trimax Receiver/Coupler Lock Set
Keyed alike set
Combination of a T-3 5/8" receiver lock &
TC1 7/8" span coupler lock
No internal springs to seize or break
Polished steel with stainless steel internal
components
TMX TM31
Trimax Receiver Lock
Easy 1/4 turn operation
Made of chrome plated machine hardened steel
Large 1/4” dual lock lugs prevent false locking
Integral O-ring and water tight cap seals out dirt and corrosion
TMX TR200 5/8" pin for class III, IV & V receivers
Fulton Coupler Lock Combo Set
Combo lock set
Bent shank brass coupler
For 1-1/4" & 2" square receivers
FUL 63249
Trimax Receiver/Coupler Lock Set
Keyed alike set with a SXT3 5/8"
receiver lock & span coupler
100% stainless steel
Features 1/4 turn technology that
cannot be false locked
O ring keeps water, grime and dirt out
of locking mechanism
Protective rubber cap protects keyhole
TMX SXTM31 7/8" span
Trimax Wheel Chock Locks
Quick and easy installation
Locks and chocks wheel for roll
prevention
Rubber coated arms protect wheel
Heavy gauge powder coated
construction
TMX TCL65 Closed: 6", Open: 10.5", Reach: 7.25"
TMX TCL75 Closed: 7", Open: 11.25", Reach: 10.5"
Camco Wheel Chock
Chocks keep your trailer in place so
Solidly constructed of durable hard
plastic with UV inhibitors
Includes rope for ease of use
D: 8.25" x H: 4.56" x W: 4.88"
CAM 44472
Camco Super Wheel Chock
Chocks keep your trailer in place so
Solidly constructed of durable hard
plastic with UV inhibitors
D: 10" x H: 6.5" x W: 8.5"
CAM 44492
Camco Wheel Dock
Prevent your trailer tongue wheel
from rolling on the pavement or
sinking into soft ground
Heavy duty, durable dock is easy
to store and transport
D: 1.75" x Dia: 12"
CAM 44632
Trimax Ultra-Max Wheel Lock
Wheel lock with disc to cover lugs nuts and
prevent tire removal and theft
and wheels
TMX TWL100
Trimax Tire Nut Lock
A quick and easy solution to tire theft
Locks over the tire nut preventing removal
TMX TNL740
Trailer Locks / Wheel Chocks
Fulton Hitch Pin Lock
Tightens ball mount to receiver
hitch for "Rattle Free" operation
square receivers
FUL 63100
Trimax Coupler Lock
100% stainless steel
Fits up to 3-1/2" span
Features 1/4 turn technology that cannot be false locked
O ring keeps water, grime and dirt out of locking mechanism
Protective rubber cap protects keyhole
thqat will not bend or break
TMX SXTC3 Up to 3-1/2" span

1045
TRAILERING
Locks
Trimax Resettable Combination Lock
A resettable combination
Solid brass lock with 2” body
1-1/4” x 5/16” diameter hardened shackle
TMX TPC125
Trimax Padlock
Marine grade dual locking solid brass body lock
Hardened 1-1/8” x 5/16” diameter shackle
TMX TPB1125
Trimax Weatherproof Padlock
Weatherproof laminated solid steel body
lock with dual locking shackle.
1-1/8” x 5/16” shackle
TMX TPW1125
Trimax Padlock
4/pkg of keyed alike
Marine grade dual locking solid brass body lock
with a hardened .87” x .25” diameter shackle.
TMX TPB487
Fulton Cable Lock
Multi-purpose cable lock
High strength, vinyl coated steel cable
with locking pin
Locking end threads through pre-formed
loop in cable and secures into powder coated,
heavy duty cast lock
Includes two keys for end user convenience
FUL CLK15 0100 15'
Trimax Braided Cable
Quadra Braid cable with dual loops
TMX TDL1212 12' x 12mm
TMX TDL1510 15' x 10mm
Trimax Versa Cable Lock
A multi-use versa-cable lock featuring a
diameter with a locking cinching feature.
TMX VMAX6
Trimax LED Cable Lock
Push button LED illuminates combination
lock for easy night use
cable
Includes quick release bracket
TMX TRL126

with without
with without
without

1047
TRAILERING
Guardian Motor Support
Protects leading edge of motor’s lower unit
Reduces wear on steering mechanism
Bolt-on
High-strength cast aluminum with high-strength
composite components
SPR 1780236**
** Limited Quantities
Motor Support
Adjusts from 26” to 56”
Made for those hard to reach crossbars that
extend under the boat
Easy to install with included bracket attachment
SPR 1780250
For Most Boats:
Measure from a point on the bow 6" above the waterline to at least
2 ft. beyond the lowest point of the keel.
Measure from the bow eye to a point 4" to 6" forward of the jet
intake grate.
Megaware KeelGuard Protection
Manufactured from polycor, which offers superior abrasion and
corrosion resistance
Each kit contains KeelGuard, 3M VHB adhesive, burnishing
tool, 3M Scotchbrite pad, 3M #94 primer, and full instructions
Installs in minutes
The model 102 is 5 inches wide and designed for boats 16 feet and
above. It is also recommended for all personal watercraft.
MKG 102-4'ALMOND 5" x 4'
MKG 102-4'WHITE 5" x 4'
MKG 102-5'WHITE 5" x 5'
MKG 102-6'BLACK 5" x 6'
MKG 102-6'WHITE 5" x 6'
MKG 102-6'GREY 5" x 6'
MKG 102-7'WHITE 5" x 7'
MKG 102-8'WHITE 5" x 8'
MKG 102-8'BLACK 5" x 8'
MKG 102-9'WHITE 5" x 9'
MKG 102-10'WHITE 5" x 10'
MKG 102-12'WHITE 5" x 12'
Megaware KeelGuard Bowguard
Stainless steel bowguard protects your
gelcoat from bow rollers and trailer scuffs
Using 3M pressure sensitive adhesives,
bowguard installs in minutes
MKG SB-637 Solid, 5.75" x 4.5"
MKG 80637 Solid extra large, 9" x 8.75"
MKG SB-638 Notched, 5.75" x 4.5"
RockGARD
Boat Protection
Patented hull protection device
that eliminates road-tar and
damage caused by rocks and
road debris. Easy to install and
remove for safe access when
boat launching.
Zinc plated steel hardware
100% polyester mesh with UV resistant PVC black coating
One year warranty
ROC REGBLK Small 27"
ROC MEDIUMBLK Medium 33"
ROC LARGEBLK Large 39"
ROC SEADOOBLK* Seadoo
* Request Item
Guardian Motor Support
Protects leading edge of motor’s lower unit
Reduces wear on steering mechanism
Over the roller or bolt-on installation
High-strength cast aluminum with high-strength
composite components
SPR 1780242
Panther
Transom Saver / Motor Support
Motor support saves your transom during trailering
Adjusts from 28" to 59" to reach hard to access trailer crossbars
Comes with bracket attachment and 10" rubber bungee
Fits most popular brands of trailers
Easily removed for loading and unloading.
PAN 55-1900
Hull Protection / Motor Supports

1048
TRAILERING
Garelick Motor Tilt
Helps tilt motor back safely
without strain
Lightweight & compact
Made of 1" dia anodized
aluminum tubing
Good for motors up to 40 hp
GAR 71036
Garelick Boat Dolly
Clamps securely to the transom
Utilizes 1" sturdy zinc plated steel and 4
- 7" rubber tired wheels mounted on 1/2"
zinc plated steel axle
Ideal for moving boats from cars to water,
at lake homes, campsites and resorts
Maximum weight: 250 lbs
GAR 71050
Davis Small Boat Dolly
as small sailboats and dinghies. This dolly is constructed of heavy
duty anodized aluminum tubing and polypropylene struts with
delrin quick release buckles. A fold-away foot rod holds the dolly
upright to facilitate single-handed loading. Easily broken down for
transport.
Bunk is adjustable to 18" or 28"
Wheel spacing is 37"
Bunks are 19" long x 3" wide
Fully pneumatic tires: 16 x 4"
Weight Capacity: 250 lbs on hard
surfaces, 150 lbs in soft sand
DIN 1465
Garelick Motor Carrier
Convenient way to move outboards
1" alloy reinforced aluminum tubing
and semi-pneumatic rubber tires
Fold-down gas can holder with tie-
down strap
Accommodates long shaft motors
Folds for storage
Part # Max. Hp Max. lbs Height Tank Carrier
GAR 31600 30 130 36-3/4" Yes
Davis Motor Caddy Harness
Securely attaches to outboards,
providing a safe and secure handle
for carrying, hoisting, and moving
heavy, outboard motors
Made of tough UV-rated materials,
this harness is designed to remain on
the motor permanently
Easily removed, allowing quick access to the motor
One size works on all 2 - 15 hp outboards
DIN 430
Sierra Trailering Clips
Protect trim and tilt hydraulics
during trailering.
Mercury ONLY
SIE 18-9099 2/pkg
Motor Supports / Motor Carriers / Boat Dollies
Panther Trailering Clips
Fits most cylinder rods on engines
manufactured in 1997 and newer. Snaps
over outboards hydraulic steering
and cylinder rods. Helps keep engine
centered during transport.
PAN 55-2190 2/pkg
Garelick Motor Stand
1" alloy reinforced aluminum tubing &
black recycled plastic mounting board
Accommodates long shaft motors
Folds for storage
Part # Max. Hp Max. lbs Height Tank Carrier
GAR 30400 50 180 36" No

1049
TRAILERING
Boat Dollies / Davits / Letters & Totes
Endurance Universal Davit System
Made of PVC & S/S
Sold by the pair
END DH-1
*Glue not included*
Davis Wheel-A-Weigh
Launching Wheel
Wheel-a-Weigh launching wheels for small
boats and car toppers ride in tracks permanently
installed on the transom. Wheels lock in the
“down” position for transporting overland.
After launching, they lock in the “up” position.
Wheels are easily removed for storage or theft
prevention. These units are made of anodized
marine aluminum and stainless steel with injection
molded wheels.
Extra capacity
Fully pneumatic tires
Wheel dimensions: 16" x 4.0"
Weight capacity: 300 lbs. on hard surfaces,
200 lb. in soft sand
DIN 1481
Parts:
DIN R1481A Replacement strut
DIN R1481B Tire with hub
T-H Marine
Cooler Mounting Kit
Kit includes four corner brackets and
two hold down straps
Designed to prevent unwanted cooler
movement on your deck
Made from U.V. resistant materials
Comes with all mounting hardware including screws
Fits virtually all coolers including Igloo
THM CMK-1-DP
Scepter Storage Totes
Made from food grade polyethylene
Rust and dent proof
Withstand temperature changes
SCE 71216R Senior tote (19 gal) 24" x 20-1/8" x 12-3/8"
SCE 71217R Senior tote lid
Hardline Products Display Kit
22” x 24” hardboard display panel with
plastic pockets that come complete with 10
of each letter and 10 of each number in a
solid black die cut vinyl.
HRD 2B-P
Hardline Products
Stick-On Letter Kits
144 - 3" letters & numbers in a single
consumer pkg
4 of each letter and number
Letter a boat, PWC, snowmobile, car,
truck, mailbox, etc
HRD BLK350EC Black
HRD BLU350EC Blue
HRD RED350EC Red
HRD WHI350EC White
Hardline Products Stick On Numbers & Letters
The industries most Popular 3" style letters and numbers. The Dyer
style has become the standard for die-cut decals.
Meets USCG Regulations
Durable waterproof black or white vinyl
Laminated for fade and fuel resistance
Individually bar coded
Self-aligning alignment
Black Letters
HRD 3-SCB-P-(# or letter)
Example: to order the letter 'B" order DYE 3SCBPB
White Letters
HRD 3-SCW-P-(# or letter)
Example: to order the letter 'B" order DYE 3SCWPB
Dock Edge Dock Cart
Removable heavy wall poly bucket
Powder coated steel frame
Load capacity: 300 lbs
DOC 90-600-F

FSR™
Fiberglass
Stain Remover
Windex®
Wind Direction
Indicator
Team™Telescoping
Boat Hooks & Paddles
On Top All
Over the World!
The Best There Is!
Specially formulated
for removing oil, rust,
exhaust, waterline
and transom stains.
Happy®
Troller
Slows Motors Down
to that "Fish
Tantalizing"
Speed
Reduces speed in
"down" position,
acts as a stabilizer
in "up" position.
Proven the Best!
Most dependable twist lock,
strongest hook… and they
float!
Reduces shock loads on dock lines,
towing lines, tie-downs, preventers
and cleats. 20” (51 cm) long. Patented.
Shockles®
LineSnubber™
Multipurpose Shock Absorber
Eases the tension on the anchor chain,
rode, snubber line, anchor roller, windlass
and cleats. Eliminates chain noise.
20” (51 cm) long.
AnchorSnubber ™ Ten times stronger than a standard
bungee cord. 18” (46 cm) long.
MiniShockle™
A Bungee Cord on Steroids!
Wheels lock in "down" position
for overland transport, swing
up or detach after launch.
Extremely sensitive.
Tacking tab system
reads at a glance.
Wind tunnel tested
to over 80 knots.
Air-Dryr ™
Say Goodbye to Mold,
Mildew, Moisture
An inexpensive, effective way
to fight moisture problems
and corrosion. Silent, low-
cost operation.
Wheel-a-Weigh™
Boat Launching Wheels
make boat handling easy!

Brownell Boat Stands and Carver Boat Covers Guide

Recommended

Recommended

More Related Content

Similar to Brownell Boat Stands and Carver Boat Covers Guide

Similar to Brownell Boat Stands and Carver Boat Covers Guide (20)

More from Marine Hardware

More from Marine Hardware (19)

Recently uploaded

Recently uploaded (8)

Brownell Boat Stands and Carver Boat Covers Guide