This document provides specifications for bag components of three bag sizes - Mini, Medium, and Large. It specifies dimensions and tolerances for the bag shell, bottom board, turntop, side seam, patch paper, handles, bag graphics, and general dimensions. Dimensional tolerances are specified as ±1/8 inch unless otherwise noted. The document includes diagrams and notes intended to ensure dimensional consistency and quality for bag production.
Handwritten Text Recognition for manuscripts and early printed texts
Mountain Stream Group: Portfolio Sample - Quality Control Manual Development
1. “WHAT TO WATCH FOR”
Dimensional tolerances are ±1/8”
unless otherwise specified.
2. WRIGHT PACKAGING
LARGE
WR-950
MEDIUM
WR-949
MINI
WR-948
2
“WHAT TO WATCH FOR” Copyright 2008. All Rights Reserved. Wright Packaging, Inc.
3. WRIGHT
PACKAGING
BAG COMPONENTS
6 Handles
5 Patch Paper
4 Side Seam 3 Turntop
1 Shell
7 Bag Graphics
2 Bottom Board/
Bag Bottom 8 General Dimensions
3
Copyright 2008. All Rights Reserved. Wright Packaging, Inc. “WHAT TO WATCH FOR”
4. WRIGHT PACKAGING
1 Shell
• 80# Smurfit Stone Kraft Paper
• Inside of shell is 100% ink coverage.
• Color refer to sample board.
4
“WHAT TO WATCH FOR” Copyright 2008. All Rights Reserved. Wright Packaging, Inc.
5. WRIGHT
PACKAGING
2 Bottom Board/
Bag Bottom
• Bottom board to be 500 gsm.
• 100% ink coverage on bottom board
• Bottom board tipped into bag.
• 1/8” ± 1/16” stripe on bag bottom flap.
• Refer to sample board for bottom board and stripe color.
1/8” Stripe -1/16”
+1/16”
5
Copyright 2008. All Rights Reserved. Wright Packaging, Inc. “WHAT TO WATCH FOR”
6. WRIGHT PACKAGING
3 Turntop
• Targeted gap between top of turn to printed border
is 1/8” ± 1/16”
1/8” -1/16”
Top of Bag
+1/16” Turntop Shell
Turntop Border
1-1/8” -1/16”
+1/16”
1-3/8” 2”
Patch Paper
See Specifications
for Bag Height by Size
1/16” Gap 1/8” Gap (Target) 3/16” Gap
Turntop border color CAN NOT
coincide with the top of the bag.
Turntop border color CAN NOT roll
over onto the front of the bag.
6
“WHAT TO WATCH FOR” Copyright 2008. All Rights Reserved. Wright Packaging, Inc.
7. WRIGHT
PACKAGING
4 Side Seam
• Seam exposure is 1/8” ±1/16”
Side Seam
Glue Flap
1/8” -1/16”
+1/16”
Gap
7
Copyright 2008. All Rights Reserved. Wright Packaging, Inc. “WHAT TO WATCH FOR”
8. WRIGHT PACKAGING
5 Patch Paper
• Positioned in center of panel between seams.
• Parallel to the turntop.
• Refer to sample board for color.
• Refer to sample board for positioning.
//
Parallel
C
L
8
“WHAT TO WATCH FOR” Copyright 2008. All Rights Reserved. Wright Packaging, Inc.
9. WRIGHT
PACKAGING
6 Handles
• Twisted red kraft paper
• Refer to sample board for color
• Handle width 4”
• Handle height 3” at top of arch.
• Front and back handle offset per sample board.
• Handle and bag assembly weight tested:
Mini: 6
Medium & Large: 10 lbs
4”
3”
Handles Offset
Thickness of the handle
9
Copyright 2008. All Rights Reserved. Wright Packaging, Inc. “WHAT TO WATCH FOR”
10. WRIGHT PACKAGING
7 Bag Graphics
• Refer to sample board for gelpop-color, gloss and hardness.
• Refer to sample board for gray type and stripe color.
• Align graphics’ center vertically in the front and back panels.
• Refer to sample board for horizonal positioning.
C
L
10
“WHAT TO WATCH FOR” Copyright 2008. All Rights Reserved. Wright Packaging, Inc.
11. WRIGHT
PACKAGING
8 General Dimensions
H
G
W
BAG SIZE P/N W G H
MINI WR-948 8.625 4.500 10.625
MEDIUM WR-949 12.500 5.750 15.500
LARGE WR-950 16.000 6.000 18.750
11
Copyright 2008. All Rights Reserved. Wright Packaging, Inc. “WHAT TO WATCH FOR”