This document provides instructions for installing pistons and connecting rods in a C6.6 engine. It outlines the required tools and safety notices, then describes the 12 step process. This includes lubricating parts, inserting the piston and connecting rod assembly into the cylinder, installing the connecting rod cap with new bolts, and torquing the bolts to the specified values. The instructions note to ensure matching numbers are installed and to check for proper movement after installation is complete.
The document provides instructions for removing and installing the fuel injection pump gear on a Caterpillar C7.1 engine. The 3-step removal process includes:
1. Locking the camshaft and crankshaft in position using timing pins.
2. Applying pressure to remove the backlash from the fuel injection pump gear and locking it in position.
3. Using a puller tool to remove the fuel injection pump gear nut and washer.
The 4-step installation process includes:
1. Ensuring proper alignment of timing marks on gears and locking the camshaft and crankshaft.
2. Installing the fuel injection pump gear and tightening the nut while removing
The document provides instructions for removing and installing the fuel injection pump gear on a Caterpillar C7.1 engine. The 3 step summary is:
1. To remove the gear, lock the camshaft and crankshaft, mark alignment of gears, and use a puller tool to remove the gear from the fuel injection pump shaft.
2. To install the gear, ensure proper alignment of gears using timing marks, install the gear on the fuel injection pump shaft, and tighten the nut while applying pressure to remove backlash.
3. Lubricate the gear teeth and install the front cover after installing the fuel injection pump gear.
The document provides instructions for removing and installing the fuel injection pump gear on a Caterpillar C7.1 engine. The 3 step summary is:
1. To remove the gear, lock the camshaft and crankshaft, mark alignment of gears, and use a puller tool to remove the gear from the fuel injection pump shaft.
2. To install the gear, ensure proper alignment of gears using timing marks, install the gear on the fuel injection pump shaft, and tighten the nut while applying pressure to remove backlash.
3. Lubricate the gear teeth and install the front cover after installing the fuel injection pump gear.
The document provides instructions for removing and installing the fuel injection pump gear on a Caterpillar C7.1 engine. The 3-step removal process includes:
1. Locking the camshaft and crankshaft in position using timing pins.
2. Applying pressure to remove the backlash from the fuel injection pump gear and locking it in position.
3. Using a puller tool to remove the fuel injection pump gear nut and washer.
The 4-step installation process includes:
1. Ensuring proper alignment of timing marks on gears and locking the camshaft and crankshaft.
2. Installing the fuel injection pump gear and tightening the nut while removing
The document provides instructions for removing and installing the fuel injection pump gear on a Caterpillar C7.1 engine. The 3 step summary is:
1. To remove the gear, lock the camshaft and crankshaft, mark alignment of gears, and use a puller tool to remove the gear from the fuel injection pump shaft.
2. To install the gear, ensure proper alignment of gears using timing marks, install the gear on the fuel injection pump shaft, and tighten the nut while applying pressure to remove backlash.
3. Lubricate the gear teeth and install the front cover after installing the fuel injection pump gear.
The document provides instructions for removing and installing the fuel injection pump gear on a Caterpillar C7.1 engine. The 3 step summary is:
1. To remove the gear, lock the camshaft and crankshaft, mark alignment of gears, and use a puller tool to remove the gear from the fuel injection pump shaft.
2. To install the gear, ensure proper alignment of gears using timing marks, install the gear on the fuel injection pump shaft, and tighten the nut while applying pressure to remove backlash.
3. Lubricate the gear teeth and install the front cover after installing the fuel injection pump gear.
The document provides instructions for removing the fuel injection pump gear from a 320D2 excavator. Key steps include:
1. Using turning tools to lock the crankshaft and camshaft in position with timing pins.
2. Marking the alignment of gears to ensure proper reinstallation.
3. Installing a puller tool through holes in the gear to remove it along with the washer and nut.
The document provides instructions for removing and installing the fuel injection pump gear on a Caterpillar C7.1 engine. The 3 step summary is:
1. To remove the gear, lock the camshaft and crankshaft, mark alignment of gears, and use a puller tool to remove the gear from the fuel injection pump shaft.
2. To install the gear, ensure proper alignment of gears using timing marks, install the gear on the fuel injection pump shaft, and tighten the nut while applying pressure to remove backlash.
3. Lubricate the gear teeth and install the front cover after installing the fuel injection pump gear.
The document provides instructions for removing and installing the fuel injection pump gear on a Caterpillar C7.1 engine. The 3-step removal process includes:
1. Locking the camshaft and crankshaft in position using timing pins.
2. Applying pressure to remove the backlash from the fuel injection pump gear and locking it in position.
3. Using a puller tool to remove the fuel injection pump gear nut and washer.
The 4-step installation process includes:
1. Ensuring proper alignment of timing marks on gears and locking the camshaft and crankshaft.
2. Installing the fuel injection pump gear and tightening the nut while removing
The document provides instructions for removing and installing the fuel injection pump gear on a Caterpillar C7.1 engine. The 3 step summary is:
1. To remove the gear, lock the camshaft and crankshaft, mark alignment of gears, and use a puller tool to remove the gear from the fuel injection pump shaft.
2. To install the gear, ensure proper alignment of gears using timing marks, install the gear on the fuel injection pump shaft, and tighten the nut while applying pressure to remove backlash.
3. Lubricate the gear teeth and install the front cover after installing the fuel injection pump gear.
The document provides instructions for removing and installing the fuel injection pump gear on a Caterpillar C7.1 engine. The 3 step summary is:
1. To remove the gear, lock the camshaft and crankshaft, mark alignment of gears, and use a puller tool to remove the gear from the fuel injection pump shaft.
2. To install the gear, ensure proper alignment of gears using timing marks, install the gear on the fuel injection pump shaft, and tighten the nut while applying pressure to remove backlash.
3. Lubricate the gear teeth and install the front cover after installing the fuel injection pump gear.
The document provides instructions for removing and installing the fuel injection pump gear on a Caterpillar C7.1 engine. The 3-step removal process includes:
1. Locking the camshaft and crankshaft in position using timing pins.
2. Applying pressure to remove the backlash from the fuel injection pump gear and locking it in position.
3. Using a puller tool to remove the fuel injection pump gear nut and washer.
The 4-step installation process includes:
1. Ensuring proper alignment of timing marks on gears and locking the camshaft and crankshaft.
2. Installing the fuel injection pump gear and tightening the nut while removing
The document provides instructions for removing and installing the fuel injection pump gear on a Caterpillar C7.1 engine. The 3 step summary is:
1. To remove the gear, lock the camshaft and crankshaft, mark alignment of gears, and use a puller tool to remove the gear from the fuel injection pump shaft.
2. To install the gear, ensure proper alignment of gears using timing marks, install the gear on the fuel injection pump shaft, and tighten the nut while applying pressure to remove backlash.
3. Lubricate the gear teeth and install the front cover after installing the fuel injection pump gear.
The document provides instructions for removing and installing the fuel injection pump gear on a Caterpillar C7.1 engine. The 3 step summary is:
1. To remove the gear, lock the camshaft and crankshaft, mark alignment of gears, and use a puller tool to remove the gear from the fuel injection pump shaft.
2. To install the gear, ensure proper alignment of gears using timing marks, install the gear on the fuel injection pump shaft, and tighten the nut while applying pressure to remove backlash.
3. Lubricate the gear teeth and install the front cover after installing the fuel injection pump gear.
The document provides instructions for removing the fuel injection pump gear from a 320D2 excavator. Key steps include:
1. Using turning tools to lock the crankshaft and camshaft in position with timing pins.
2. Marking the alignment of gears to ensure proper reinstallation.
3. Installing a puller tool through holes in the gear to remove it along with the washer and nut.
The document provides instructions for removing and installing the fuel injection pump gear on a Caterpillar C7.1 engine. The 3 step summary is:
1. To remove the gear, lock the camshaft and crankshaft, mark alignment of gears, and use a puller tool to remove the gear from the fuel injection pump shaft.
2. To install the gear, ensure proper alignment of gears using timing marks, install the gear on the fuel injection pump shaft, and tighten the nut while applying pressure to remove backlash.
3. Lubricate the gear teeth and install the front cover after installing the fuel injection pump gear.
JOHN DEERE 430 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...jiuliu14811471
The document provides service information for John Deere 322, 330, 332, and 430 lawn and garden tractors, including safety guidelines, specifications, repair specifications and torque values, fuel and lubricant recommendations, and diagnostic and testing procedures. It is intended as a technical manual for experienced technicians to service these tractor models. The manual contents are organized into sections covering general information, engine repair, electrical systems, power train, steering/brakes, hydraulics, and diagnostics.
JOHN DEERE 332 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...jiuliu14811471
The document provides service information for John Deere 322, 330, 332, and 430 lawn and garden tractors, including safety guidelines, specifications, repair specifications and torque values, fuel and lubricant recommendations, and diagnostic and testing procedures. It is intended as a technical manual for experienced technicians performing maintenance and repairs. Safety messages throughout warn of hazards involving high pressure fluids, battery explosions, fire risks, and preventing acid burns or injuries.
JOHN DEERE 330 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...jiuliu14811471
The document provides service information for John Deere 322, 330, 332, and 430 lawn and garden tractors, including safety guidelines, specifications, repair specifications and torque values, fuel and lubricant recommendations, and diagnostic and testing procedures. It is intended as a technical manual for experienced technicians to service these tractor models. The manual contents are organized into sections covering general information, engine repair, electrical systems, power train, steering/brakes, hydraulics, and diagnostics.
JOHN DEERE 322 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...jiuliu14811471
The document provides service information for John Deere 322, 330, 332, and 430 lawn and garden tractors, including safety guidelines, specifications, repair specifications and torque values, fuel and lubricant recommendations, and diagnostic and testing procedures. It is intended as a technical manual for experienced technicians to service these tractor models. The manual contents are organized into sections covering general information, engine repair, electrical systems, power train, steering/brakes, hydraulics, and diagnostics.
John Deere 261 and 272 Rear-Mounted Mowers Service Repair Manual Instant Down...jiuliu14811471
This technical manual provides information for experienced technicians on John Deere commercial and consumer equipment, including specifications, safety information, and diagrams. It is organized systematically to keep all information for a particular system together. The manual is intended as a reference for technicians to service and maintain the listed equipment properly.
John Deere 74 and 84 Blades Service Repair Manual Instant Download.pdfjiuliu14811471
This technical manual provides information and specifications for John Deere commercial and consumer equipment, including several mower, tiller, broom, and snowblower models. The manual is organized systematically to keep all information for a particular system together. Safety is the first section and introduces safety symbols and guidelines to follow when operating the equipment.
John Deere 54D, 60D, 62D AND 72D OnRamp Mowers Service Repair Manual Instant ...jiuliu14811471
This technical manual provides information and specifications for John Deere commercial and consumer equipment, including several mower, tiller, broom, and snowblower models. The manual is organized systematically to keep all information for a particular system together. Safety is the first section and introduces safety symbols and guidelines to follow when operating the equipment.
John Deere 54D, 60D and 72 Service Repair Manual Instant Download.pdfjiuliu14811471
This technical manual provides information and specifications for John Deere commercial and consumer equipment, including several mower, tiller, broom, and snowblower models. The manual is organized systematically to keep all information for a particular system together. Safety is the first section and introduces safety symbols and guidelines to follow when operating the equipment.
John Deere 54, 60 and 72-Inch Mid Mount Mowers Service Repair Manual Instant ...jiuliu14811471
This technical manual provides information for experienced technicians on John Deere commercial and consumer equipment, including specifications, safety information, and diagrams. It is organized systematically to keep all information for a particular system together. The manual is intended as a reference for technicians to service and maintain the listed equipment properly.
John Deere 47 and 59 Snowbowers Service Repair Manual Instant Download.pdfjiuliu14811471
This technical manual provides information for experienced technicians on John Deere commercial and consumer equipment, including specifications, safety information, and diagrams. It is organized systematically to keep all information for a particular system together. The manual is intended as a reference for technicians to service and maintain the listed equipment properly.
John Deere 31B Post Hole Digger Service Repair Manual Instant Download.pdfjiuliu14811471
This technical manual provides information for experienced technicians on John Deere commercial and consumer equipment, including specifications, safety information, and diagrams. It is organized systematically to keep all information for a particular system together. The manual is intended as a reference for technicians to service and maintain the listed equipment properly.
John Deere 26 and 51-Inch Brooms Service Repair Manual Instant Download.pdfjiuliu14811471
This technical manual provides information for experienced technicians on John Deere commercial and consumer equipment, including specifications, safety information, and diagrams. It is organized systematically to keep all information for a particular system together. The manual is intended as a reference for technicians to service and maintain the listed equipment properly.
John Deere 5E 2BV Blower Service Repair Manual Instant Download (TM1430).pdfjiuliu14811471
The document provides specifications for small engines and equipment including blowers, hedge clippers, and trimmers made by John Deere, listing details like engine type, displacement, speed ranges, components, and dimensions for each model. Safety guidelines are also provided, advising users to keep others away from operating equipment, avoid overreaching or pointing tools at people, and always shut off engines before adjusting or refueling.
The document provides instructions for disassembling a cylinder head from a D11N track-type tractor. The procedures include removing inlet and exhaust valves, bridge dowels, valve seat inserts, valve guides, and valve lifters. Tools required are listed for each step. Safety notices emphasize keeping parts clean and wearing protective equipment when compressing valve springs.
The document is a service manual that provides instructions for removing and installing the high-low transmission on a D8L track-type tractor. It details over 50 steps to disassemble the transmission down to individual components and then reassemble. These include draining fluids, removing mounting hardware, disconnecting wiring and hoses, using specialty tools to separate interconnected pieces, cleaning and inspecting parts, and precisely reinstalling components in the reverse order.
The document provides instructions for removing and installing the bulldozer blade on a D6R Track-Type Tractor. The key steps include:
1. Disconnecting hydraulic hoses from the manifold and capping the connections.
2. Removing bolts, caps, and shims from the lift cylinders and stabilizer link.
3. Installing tooling under the push arms and using it to support the bulldozer blade.
4. Removing mounting bolts to detach the bulldozer blade from the tractor frame.
Caterpillar Cat D4HTSK III TRACK SKIDDER (Prefix 7PK) Service Repair Manual I...jiuliu14811471
This document provides instructions for removing and installing the cylinder head assembly on a Caterpillar 3304 engine. The steps include draining coolant, removing exhaust manifolds, valve covers, belts, hoses, wires and other components. The cylinder head bolts are then removed to lift off the head. Reinstallation follows the reverse order, applying thread lubricant and torquing bolts to the specified values. Valve clearance is adjusted at the end.
The document provides instructions for removing and installing an exhaust manifold and inlet/exhaust valves on a 3054E industrial engine. It includes removal and installation procedures with required tools and safety notices. The procedures describe removing/installing the exhaust manifold gasket, setscrews, and turbocharger. For valves, it describes removing/installing the valve springs, retainers, keepers, and stem seals while ensuring the piston is at top dead center.
This document provides installation instructions for a fuel injection pump on a 3054C industrial engine. It consists of 14 steps: 1) Ensure the engine is at top dead center, 2) Install an O-ring on the pump, 3) Position and bolt the pump to the housing, 4) Install a bracket, 5) Install the pump gear and tighten, 6) Connect wiring, 7) Connect fuel lines, 8) Adjust a spacer and bolt, 9) Tighten the gear nut, 10) Remove timing tools, 11) Install covers and pulleys, 12) Install fuel lines. The instructions include illustrations and torque specifications for each step.
1. The document provides instructions for assembling and disassembling the piston pump on a 994H Wheel Loader. It describes the required tools and gives step-by-step instructions with accompanying illustrations.
2. The assembly procedure involves installing bearings, seals, springs, pistons, and other components in the proper order. Precise measurements are taken to ensure correct lift-off limitations.
3. The disassembly and installation procedures are described for removing and installing the high pressure screen and piston pump. Hoses and fittings are disconnected and reconnected.
JOHN DEERE 430 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...jiuliu14811471
The document provides service information for John Deere 322, 330, 332, and 430 lawn and garden tractors, including safety guidelines, specifications, repair specifications and torque values, fuel and lubricant recommendations, and diagnostic and testing procedures. It is intended as a technical manual for experienced technicians to service these tractor models. The manual contents are organized into sections covering general information, engine repair, electrical systems, power train, steering/brakes, hydraulics, and diagnostics.
JOHN DEERE 332 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...jiuliu14811471
The document provides service information for John Deere 322, 330, 332, and 430 lawn and garden tractors, including safety guidelines, specifications, repair specifications and torque values, fuel and lubricant recommendations, and diagnostic and testing procedures. It is intended as a technical manual for experienced technicians performing maintenance and repairs. Safety messages throughout warn of hazards involving high pressure fluids, battery explosions, fire risks, and preventing acid burns or injuries.
JOHN DEERE 330 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...jiuliu14811471
The document provides service information for John Deere 322, 330, 332, and 430 lawn and garden tractors, including safety guidelines, specifications, repair specifications and torque values, fuel and lubricant recommendations, and diagnostic and testing procedures. It is intended as a technical manual for experienced technicians to service these tractor models. The manual contents are organized into sections covering general information, engine repair, electrical systems, power train, steering/brakes, hydraulics, and diagnostics.
JOHN DEERE 322 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...jiuliu14811471
The document provides service information for John Deere 322, 330, 332, and 430 lawn and garden tractors, including safety guidelines, specifications, repair specifications and torque values, fuel and lubricant recommendations, and diagnostic and testing procedures. It is intended as a technical manual for experienced technicians to service these tractor models. The manual contents are organized into sections covering general information, engine repair, electrical systems, power train, steering/brakes, hydraulics, and diagnostics.
John Deere 261 and 272 Rear-Mounted Mowers Service Repair Manual Instant Down...jiuliu14811471
This technical manual provides information for experienced technicians on John Deere commercial and consumer equipment, including specifications, safety information, and diagrams. It is organized systematically to keep all information for a particular system together. The manual is intended as a reference for technicians to service and maintain the listed equipment properly.
John Deere 74 and 84 Blades Service Repair Manual Instant Download.pdfjiuliu14811471
This technical manual provides information and specifications for John Deere commercial and consumer equipment, including several mower, tiller, broom, and snowblower models. The manual is organized systematically to keep all information for a particular system together. Safety is the first section and introduces safety symbols and guidelines to follow when operating the equipment.
John Deere 54D, 60D, 62D AND 72D OnRamp Mowers Service Repair Manual Instant ...jiuliu14811471
This technical manual provides information and specifications for John Deere commercial and consumer equipment, including several mower, tiller, broom, and snowblower models. The manual is organized systematically to keep all information for a particular system together. Safety is the first section and introduces safety symbols and guidelines to follow when operating the equipment.
John Deere 54D, 60D and 72 Service Repair Manual Instant Download.pdfjiuliu14811471
This technical manual provides information and specifications for John Deere commercial and consumer equipment, including several mower, tiller, broom, and snowblower models. The manual is organized systematically to keep all information for a particular system together. Safety is the first section and introduces safety symbols and guidelines to follow when operating the equipment.
John Deere 54, 60 and 72-Inch Mid Mount Mowers Service Repair Manual Instant ...jiuliu14811471
This technical manual provides information for experienced technicians on John Deere commercial and consumer equipment, including specifications, safety information, and diagrams. It is organized systematically to keep all information for a particular system together. The manual is intended as a reference for technicians to service and maintain the listed equipment properly.
John Deere 47 and 59 Snowbowers Service Repair Manual Instant Download.pdfjiuliu14811471
This technical manual provides information for experienced technicians on John Deere commercial and consumer equipment, including specifications, safety information, and diagrams. It is organized systematically to keep all information for a particular system together. The manual is intended as a reference for technicians to service and maintain the listed equipment properly.
John Deere 31B Post Hole Digger Service Repair Manual Instant Download.pdfjiuliu14811471
This technical manual provides information for experienced technicians on John Deere commercial and consumer equipment, including specifications, safety information, and diagrams. It is organized systematically to keep all information for a particular system together. The manual is intended as a reference for technicians to service and maintain the listed equipment properly.
John Deere 26 and 51-Inch Brooms Service Repair Manual Instant Download.pdfjiuliu14811471
This technical manual provides information for experienced technicians on John Deere commercial and consumer equipment, including specifications, safety information, and diagrams. It is organized systematically to keep all information for a particular system together. The manual is intended as a reference for technicians to service and maintain the listed equipment properly.
John Deere 5E 2BV Blower Service Repair Manual Instant Download (TM1430).pdfjiuliu14811471
The document provides specifications for small engines and equipment including blowers, hedge clippers, and trimmers made by John Deere, listing details like engine type, displacement, speed ranges, components, and dimensions for each model. Safety guidelines are also provided, advising users to keep others away from operating equipment, avoid overreaching or pointing tools at people, and always shut off engines before adjusting or refueling.
The document provides instructions for disassembling a cylinder head from a D11N track-type tractor. The procedures include removing inlet and exhaust valves, bridge dowels, valve seat inserts, valve guides, and valve lifters. Tools required are listed for each step. Safety notices emphasize keeping parts clean and wearing protective equipment when compressing valve springs.
The document is a service manual that provides instructions for removing and installing the high-low transmission on a D8L track-type tractor. It details over 50 steps to disassemble the transmission down to individual components and then reassemble. These include draining fluids, removing mounting hardware, disconnecting wiring and hoses, using specialty tools to separate interconnected pieces, cleaning and inspecting parts, and precisely reinstalling components in the reverse order.
The document provides instructions for removing and installing the bulldozer blade on a D6R Track-Type Tractor. The key steps include:
1. Disconnecting hydraulic hoses from the manifold and capping the connections.
2. Removing bolts, caps, and shims from the lift cylinders and stabilizer link.
3. Installing tooling under the push arms and using it to support the bulldozer blade.
4. Removing mounting bolts to detach the bulldozer blade from the tractor frame.
Caterpillar Cat D4HTSK III TRACK SKIDDER (Prefix 7PK) Service Repair Manual I...jiuliu14811471
This document provides instructions for removing and installing the cylinder head assembly on a Caterpillar 3304 engine. The steps include draining coolant, removing exhaust manifolds, valve covers, belts, hoses, wires and other components. The cylinder head bolts are then removed to lift off the head. Reinstallation follows the reverse order, applying thread lubricant and torquing bolts to the specified values. Valve clearance is adjusted at the end.
The document provides instructions for removing and installing an exhaust manifold and inlet/exhaust valves on a 3054E industrial engine. It includes removal and installation procedures with required tools and safety notices. The procedures describe removing/installing the exhaust manifold gasket, setscrews, and turbocharger. For valves, it describes removing/installing the valve springs, retainers, keepers, and stem seals while ensuring the piston is at top dead center.
This document provides installation instructions for a fuel injection pump on a 3054C industrial engine. It consists of 14 steps: 1) Ensure the engine is at top dead center, 2) Install an O-ring on the pump, 3) Position and bolt the pump to the housing, 4) Install a bracket, 5) Install the pump gear and tighten, 6) Connect wiring, 7) Connect fuel lines, 8) Adjust a spacer and bolt, 9) Tighten the gear nut, 10) Remove timing tools, 11) Install covers and pulleys, 12) Install fuel lines. The instructions include illustrations and torque specifications for each step.
1. The document provides instructions for assembling and disassembling the piston pump on a 994H Wheel Loader. It describes the required tools and gives step-by-step instructions with accompanying illustrations.
2. The assembly procedure involves installing bearings, seals, springs, pistons, and other components in the proper order. Precise measurements are taken to ensure correct lift-off limitations.
3. The disassembly and installation procedures are described for removing and installing the high pressure screen and piston pump. Hoses and fittings are disconnected and reconnected.
Top-Quality AC Service for Mini Cooper Optimal Cooling PerformanceMotor Haus
Ensure your Mini Cooper stays cool and comfortable with our top-quality AC service. Our expert technicians provide comprehensive maintenance, repairs, and performance optimization, guaranteeing reliable cooling and peak efficiency. Trust us for quick, professional service that keeps your Mini Cooper's air conditioning system in top condition, ensuring a pleasant driving experience year-round.
Kalyan chart DP boss guessing matka results➑➌➋➑➒➎➑➑➊➍
8328958814Satta Matka is a number-based game. There are several markets, each with its owner responsible for releasing the lottery satta Matka market results on time. Kalyan market, Worli market, main Mumbai market, Rajdhani market, and Milan market are some of the main markets or bazaars involved in the satta Matka game. The oldest and most legitimate markets are in Kalyan and Main Mumbai. Every Satta Market has an open and close time. The satta results for these markets are published on or shortly after the open and close times. During the open result, two numbers are decoded, one of which is a three-digit number and the other a single-digit number. Similarly, three-digit and single-digit numbers are declared during the satta market's close. The last digit after adding the three digits of the open or close result is usually the single digit declared during the open and close results.KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAINSATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA MATKA FAST RESULT MILAN RATAN RAJDHANI MAIN BAZAR MATKA FAST TIPS RESULT MATKA CHART JODI CHART PANEL CHART FREE FIX GAME SATTAMATKA ! MATKA MOBI SATTA 143 spboss.in TOP NO1 RESULT FULL RATE MATKA ONLINE GAME PLAY BY APP SPBOSSdp boss net, dp satta, dpboss dpboss, indian satta matka, kalyan matkà result today , matka boss, matka result live, matka satta result today, satamatka com, satta boss, satta matka king, sattamatkà, sattamatkà result, sattamatta com, sattmatka sattmatka, star matka, tara matka, tara satta matka, worli matka, indian matka, matka live, kalyan guessing, satta fix, kalyan final ank, dp matka, dpboss net, sata mata com, सट्टा मटका, sattamatkà 143, golden matka, satta matta matka 143, satta fast, kalyan open, satta 143, dpboss 143 guessing, dpboss satta, golden satta matka, satta bajar
Satta Matka Market is India's leading website providing the quickest sattamatka outcome, experienced in Satta Matka game. Our services include free Satta Matka Trick and Tips for Kalyan Matka and Disawar Satta King, as well as satta matka graphs, online play, tips and more. Our team of experts strive to help you recoup your losses quickly through our proposals such as Free Satta Matka Tips and Kalyan Bazar Tips. We are known as India's best Matka DpBoss portal site, here to deliver updates on all sorts of Satta Market like Kalyan Bazar, Milan, Rajdhani, Time Bazaar, Main and the most current charts. Stay tuned with us for more live updates on the Satta market
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Automotive Engine Valve Manufacturing Plant Project Report.pptxSmith Anderson
The report provides a complete roadmap for setting up an Automotive Engine Valve. It covers a comprehensive market overview to micro-level information such as unit operations involved, raw material requirements, utility requirements, infrastructure requirements, machinery and technology requirements, manpower requirements, packaging requirements, transportation requirements, etc.
2. Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 930H WHEEL LOADER FTD
Configuration: 928Hz 930H Wheel Loader FTD00001-UP (MACHINE) POWERED BY C6.6 Engine
Disassembly and Assembly
C6.6 Engines for Caterpillar Built Machines
Media Number -KENR6081-15 Publication Date -01/03/2014 Date Updated -04/03/2014
i07531375
Pistons and Connecting Rods - Install
SMCS - 1225-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A(1)
9U-6198 Crankshaft Turning Tool 1
A(2)
9U-7336 Housing 1
5P-7305 Engine Turning Tool 1
B 1U-6684 Piston Ring Compressor 1
C 227-4390 E12 Torx Socket 1
D 8T-3052 Degree Wheel 1
(1)
The Crankshaft Turning Tool is used on the front pulley.
(2)
This Tool is used in the aperture for the electric starting motor.
Note: Either Tooling (A) can be used. Use the Tooling that is most suitable.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/4
928Hz 930H Wheel Loader FTD00001-UP (MACHINE) POWERED BY C6.6 Engine...
2020/4/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. NOTICE
Discard all used Connecting Rod bolts.
1. If the connecting rod caps were temporarily installed, remove the connecting rod caps. If
necessary, thoroughly clean all the components.
2. Apply clean engine oil to the cylinder bore, piston rings, outer surface of the piston and the
bearing shells for the connecting rod.
Note: Install the bearing shells for the connecting rods dry when clearance checks are
performed. Refer to Disassembly and Assembly, "Bearing Clearance - Check" for the
correct procedure. Apply clean engine oil to the bearing shells for the connecting rods
during final assembly.
Note: Ensure that the piston and the connecting rod assembly are installed in the correct
cylinder.
3. Use Tooling (A) to rotate the crankshaft until the crankshaft pin is at the bottom center
position. Lubricate the crankshaft pin with clean engine oil.
Illustration 1 g02013213
4. Install Tooling (B) onto piston (4).
2/4
928Hz 930H Wheel Loader FTD00001-UP (MACHINE) POWERED BY C6.6 Engine...
2020/4/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Note: Ensure that Tooling (B) is installed correctly and that piston (4) can easily slide from
the tool.
Note: The arrow on the top of the piston must be toward the front of the engine. The
locating tab for the bearing shell of the connecting rod must be on the same side of the
engine as the piston cooling jet.
5. Carefully push the piston and the connecting rod assembly into the cylinder bore and onto
the crankshaft pin.
Note: Do not damage the finished surface of the crankshaft pin.
Illustration 2 g06021020
3/4
928Hz 930H Wheel Loader FTD00001-UP (MACHINE) POWERED BY C6.6 Engine...
2020/4/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 3 g06021018
Bolt (3a) are Torx
Bolt (3b) are Bi-Hex
6. If bolts (3a) were removed, new bolts (3a) must be installed.
If bolts (3b) were removed, new bolts (3b) must be installed.
7. Install connecting rod cap (2) onto connecting rod (1).
Note: Ensure that dot punched number in Position (X) on connecting rod cap (2) matches
dot punched number in Position (X) on connecting rod (1). Ensure the correct orientation of
connecting rod cap (2). The locating tab for the upper bearing shell and the lower bearing
shell should be on the same side.
8. Install new bolts (3a) or (3b) to the connecting rod. Tighten the bolts evenly to a torque of
18 N·m (13 lb ft).
Note: Do not reuse the old bolts to secure the connecting rod cap.
9. Tighten bolts (3a) evenly to a torque of 40 N·m (30 lb ft).
Turn bolts (3a) through a further 120 degrees. Use Tooling (C) and Tooling (D) to achieve
the correct final torque.
10. Tighten bolts (3b) evenly to a torque of 70 N·m (52 lb ft).
Turn bolts (3b) through a further 120 degrees. Use Tooling (C) and Tooling (D) to achieve
the correct final torque.
11. Ensure that the installed connecting rod assembly has tactile side play. Rotate the crankshaft
to ensure that there is no binding.
12. Repeat Step 2 through Step 11 to install the remaining pistons and connecting rods.
End By:
a. Install the piston cooling jets. Refer to Disassembly and Assembly, "Piston Cooling Jets -
Remove and Install" for the correct procedure.
b. Install the cylinder head. Refer to Disassembly and Assembly, "Cylinder Head - Install" for
the correct procedure.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Apr 25 09:46:08 UTC+0800 2020
4/4
928Hz 930H Wheel Loader FTD00001-UP (MACHINE) POWERED BY C6.6 Engine...
2020/4/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 930H WHEEL LOADER FTD
Configuration: 928Hz 930H Wheel Loader FTD00001-UP (MACHINE) POWERED BY C6.6 Engine
Disassembly and Assembly
C6.6 Engines for Caterpillar Built Machines
Media Number -KENR6081-15 Publication Date -01/03/2014 Date Updated -04/03/2014
i06554302
Connecting Rod Bearings - Remove - Connecting rods in
position
SMCS - 1219-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Name Qty
A(1)
9U-6198 Crankshaft Turning Tool 1
A(2)
9U-7336 Housing 1
5P-7305 Engine Turning Tool 1
B 1U-6684 Piston Ring Compressor 1
(1)
The Crankshaft Turning Tool is used on the front pulley.
(2)
This Tool is used in the aperture for the electric starting motor.
Start By:
a. Remove the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump -
Remove" for the correct procedure.
Note: Either Tooling (A) can be used. Use the Tooling that is most suitable.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/4
928Hz 930H Wheel Loader FTD00001-UP (MACHINE) POWERED BY C6.6 Engine...
2020/4/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. NOTICE
Discard all used Connecting Rod Bolts.
Note: If all connecting rod bearings require replacement, the procedure can be carried out on two
cylinders at the same time. The procedure can be carried out on the following pairs of cylinders. 1
with 6, 2 with 5 and 3 with 4.Ensure that both pairs of the connecting rod bearings are
installed before changing from one pair of cylinders to another pair of cylinders.. Refer to
Disassembly and Assembly, "Connecting Rod Bearings - Install".
1. Use Tooling (A) to rotate the crankshaft until the crank pin is at the bottom center position.
If necessary, remove the glow plugs. Ref to Disassembly and Assembly, "Glow Plugs -
Remove and Install" for the correct procedure.
Note: Removal of glow plug aids removal of the connecting rod bearing .Removal of glow
plug is not essential.
Illustration 1 g06021012
2/4
928Hz 930H Wheel Loader FTD00001-UP (MACHINE) POWERED BY C6.6 Engine...
2020/4/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 2 g06021013
Illustration 3 g06021010
Bolt (1a) are Torx
Bolt (1b) are Bi-Hex
2. Two types of bolts (1a) or (1b) may be installed.
3. The connecting rod and the connecting rod cap should have an etched Number (X) on the
side. The number on the connecting rod and the connecting rod cap must match. If
necessary, make a temporary mark on connecting rod (5) and connecting rod cap (2) to
identify the cylinder number.
Note: Do not punch identification marks onto fracture split connecting rods. Do not stamp
identification marks onto fracture split connecting rods.
4. Remove bolts (1) and connecting rod cap (2) from connecting rod (5). Discard bolts (1).
5. Remove lower bearing shell (3) from connecting rod cap (2). Keep the bearing shell and the
connecting rod cap together.
3/4
928Hz 930H Wheel Loader FTD00001-UP (MACHINE) POWERED BY C6.6 Engine...
2020/4/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. 6. Carefully push connecting rod (5) into the cylinder bore until connecting rod (5) is clear of
the crankshaft. Remove upper bearing shell (4) from the connecting rod. Keep the bearing
shells together.
Note: Do not push on the fracture split surfaces of the connecting rod as damage may result.
Do not allow the connecting rod to contact the piston cooling jet.
7. Repeat Steps 1 through 6 for the remaining bearing shells.
Note: Fracture split connecting rods should not be left without the connecting rod caps
installed. After the removal procedure for the bearing shells is complete, carry out the
installation procedure as soon as possible. Refer to Disassembly and Assembly,
"Connecting Rod Bearings - Install" for the correct procedure.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Apr 25 09:47:04 UTC+0800 2020
4/4
928Hz 930H Wheel Loader FTD00001-UP (MACHINE) POWERED BY C6.6 Engine...
2020/4/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 930H WHEEL LOADER FTD
Configuration: 928Hz 930H Wheel Loader FTD00001-UP (MACHINE) POWERED BY C6.6 Engine
Disassembly and Assembly
C6.6 Engines for Caterpillar Built Machines
Media Number -KENR6081-15 Publication Date -01/03/2014 Date Updated -04/03/2014
i06554300
Connecting Rod Bearings - Install - Connecting rods in
position
SMCS - 1219-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Name Qty
A(1)
9U-6198 Crankshaft Turning Tool 1
A(2)
9U-7336 Housing 1
5P-7305 Engine Turning Tool 1
B 8T-3052 Degree Wheel 1
(1)
The Crankshaft Turning Tool is used on the front pulley.
(2)
This Tool is used in the aperture for the electric starting motor.
Note: Either Tooling (A) can be used. Use the Tooling that is most suitable.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/4
928Hz 930H Wheel Loader FTD00001-UP (MACHINE) POWERED BY C6.6 Engine...
2020/4/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. NOTICE
Discard all used Connecting Rod Bolts.
1. Inspect the pins of the crankshaft for damage. If the crankshaft is damaged, replace the
crankshaft. Refer to Disassembly and Assembly, "Crankshaft - Remove" and Disassembly
and Assembly, "Crankshaft - Install". Ensure that the bearing shells are clean and free from
wear or damage. If necessary, replace the bearing shells.
Illustration 1 g06021013
2. Install the upper bearing shell (4) into connecting rod (5). Ensure that the locating tab for
the upper bearing shell is correctly seated in the slot in the connecting rod.
Note: The ends of the upper bearing shell must be centered in the connecting rod. The ends
of the upper bearing shell must be equally positioned in relation to the mating faces of the
connecting rod.
3. Lubricate upper bearing shell (4) with clean engine oil.
4. Use Tooling (A) to rotate the crankshaft until the crankshaft pin is at the bottom dead center
position.
5. Carefully pull connecting rod (5) against the crankshaft pin.
Note: Do not allow the connecting rod to contact the piston cooling jet.
6. Clean connecting rod cap (2). Install lower bearing shell (3) into connecting rod cap (2).
Ensure that the locating tab for the lower bearing shell is correctly seated in the slot in the
connecting rod cap.
2/4
928Hz 930H Wheel Loader FTD00001-UP (MACHINE) POWERED BY C6.6 Engine...
2020/4/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Note: The ends of the lower bearing shell must be centered in the connecting rod cap. The
ends of the lower bearing shell must be equally positioned in relation to the mating faces of
the connecting rod cap.
7. Lubricate the pin of the crankshaft and lubricate lower bearing shell (3) with clean engine
oil.
Illustration 2 g06021012
Illustration 3 g06021010
Bolt (1a) are Torx
Bolt (1b) are Bi-Hex
3/4
928Hz 930H Wheel Loader FTD00001-UP (MACHINE) POWERED BY C6.6 Engine...
2020/4/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. 8. If bolts (1a) were removed, new bolts (1a) must be installed.
If bolts (1b) were removed, new bolts (1b) must be installed.
9. Install connecting rod cap (2) to connecting rod (5).
Note: Ensure that etched Number (X) on connecting rod cap (2) matches etched Number
(X) on connecting rod (5).Ensure the correct orientation of the connecting rod cap. The
locating tab for the upper bearing shell and the lower bearing shell should be on the same
side.
10. Install new bolts (1a) or (1b) to the connecting rod. Tighten the bolts evenly to a torque of
18 N·m (13 lb ft).
Note: Do not reuse the old bolts to secure the connecting rod cap.
11. Tighten bolts (1a) evenly to a torque of 40 N·m (30 lb ft).
Turn bolts (1a) through a further 120 degrees. Use Tooling (B) to achieve the correct final
torque.
12. Tighten bolts (1b) evenly to a torque of 70 N·m (52 lb ft).
Turn bolts (1b) through a further 120 degrees. Use Tooling (B) to achieve the correct final
torque.
13. Ensure that the installed connecting rod assembly has tactile side play. Rotate the crankshaft
to ensure that there is no binding.
14. Repeat Steps 2 through 13 for the remaining connecting rod bearings.
Note: If all connecting rod bearings require replacement, the procedure can be carried out
on two cylinders at the same time. The procedure can be carried out on the following pairs
of cylinders. 1 with 6, 2 with 5 and 3 with 4. Ensure that both pairs of the connecting rod
bearings are installed before changing from one pair of cylinders to another pair of
cylinders. Refer to Disassembly and Assembly, "Connecting Rod Bearings - Install" for the
correct procedure.
15. If the glow plugs were removed, install the glow plugs. Ref to Disassembly and Assembly,
"Glow Plugs - Remove and Install" for the correct procedure
End By:
a. Install the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump -
Install" for the correct procedure.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Apr 25 09:48:01 UTC+0800 2020
4/4
928Hz 930H Wheel Loader FTD00001-UP (MACHINE) POWERED BY C6.6 Engine...
2020/4/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 930H WHEEL LOADER FTD
Configuration: 928Hz 930H Wheel Loader FTD00001-UP (MACHINE) POWERED BY C6.6 Engine
Disassembly and Assembly
C6.6 Engines for Caterpillar Built Machines
Media Number -KENR6081-15 Publication Date -01/03/2014 Date Updated -04/03/2014
i02786922
Crankshaft Main Bearings - Remove and Install - Crankshaft
in position
SMCS - 1203-010
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Name Qty
A(1)
9U-6198 Crankshaft Turning Tool 1
A(2)
9U-7336 Housing 1
5P-7305 Engine Turning Tool 1
(1)
The Crankshaft Turning Tool is used on the front pulley.
(2)
This Tool is used in the aperture for the electric starting motor.
Start By:
a. Remove the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump -
Remove".
b. Remove the crankshaft rear seal. Refer to Disassembly and Assembly, "Crankshaft Rear
Seal - Remove".
Note: Either Tooling (A) can be used. Use the Tooling that is most suitable.
NOTICE
This procedure must only be used to remove and install the main
bearing shells with the crankshaft in position.
1/8
928Hz 930H Wheel Loader FTD00001-UP (MACHINE) POWERED BY C6.6 Engine...
2020/4/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. The removal procedure and the installation procedure must be
completed for each pair of main bearing shells before the next pair of
main bearing shells are removed.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1. Ensure that the main bearing cap is marked for the correct location and orientation.
Illustration 1 g01341323
2. Remove bolts (1) and main bearing cap (2) from the cylinder block.
2/8
928Hz 930H Wheel Loader FTD00001-UP (MACHINE) POWERED BY C6.6 Engine...
2020/4/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 2 g01341324
3. Remove lower main bearing shell (3) from main bearing cap (2). Keep the main bearing
shell and the main bearing cap together.
Note: The lower main bearing shell is a plain bearing that has no oil holes.
Illustration 3 g01341325
3/8
928Hz 930H Wheel Loader FTD00001-UP (MACHINE) POWERED BY C6.6 Engine...
2020/4/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. 4. For number six main bearing, remove two thrust washers (4) from the cylinder block. In
order to remove thrust washers (4), use Tooling (A) to rotate the crankshaft in the correct
direction. If necessary, push the crankshaft toward the front of the engine or push the
crankshaft toward the rear of the engine while you rotate the crankshaft, in order to aid
removal.
Note: The thrust washers have a locating tab at one end.
Illustration 4 g01341335
5. Push out upper main bearing shell (5) with a suitable tool from the side opposite the locating
tab. Carefully rotate the crankshaft while you push on the bearing shell. Remove upper main
bearing shell (5) from the cylinder block. Keep the bearing shells together.
Note: The upper main bearing shell has a groove and two oil holes.
Installation Procedure
Table 2
Required Tools
Tool Part Number Part Name Qty
B 8T-3052 Degree Wheel 1
C 8T-5096 Dial Indicator Gp 1
NOTICE
This procedure must only be used to remove and install the main
bearing shells with the crankshaft in position.
4/8
928Hz 930H Wheel Loader FTD00001-UP (MACHINE) POWERED BY C6.6 Engine...
2020/4/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. The removal procedure and the installation procedure must be
completed for each pair of main bearing shells before the next pair of
main bearing shells are removed.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1. Ensure that the main bearing shells are clean and free from wear or damage. If necessary,
replace the main bearing shells.
2. Clean the journals of the crankshaft. Inspect the journals of the crankshaft for damage. If
necessary, replace the crankshaft or recondition the crankshaft.
Illustration 5 g01341335
3. Lubricate the crankshaft journal and upper main bearing shell (5) with clean engine oil.
Slide upper main bearing shell (5) into position between the crankshaft journal and the
cylinder block. Ensure that the locating tab for the upper main bearing shell is correctly
seated in the slot in the cylinder block.
Note: The upper main bearing shell has a groove and two oil holes.
5/8
928Hz 930H Wheel Loader FTD00001-UP (MACHINE) POWERED BY C6.6 Engine...
2020/4/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Illustration 6 g01341325
4. For number six main bearing, ensure that two thrust washers (4) are clean and free from
wear or damage. If necessary, replace the thrust washers. Lubricate thrust washers (4) with
clean engine oil. Slide thrust washers (4) into position between the crankshaft and the
cylinder block. Ensure that the locating tab is correctly seated in the cylinder block.
Illustration 7 g01341324
6/8
928Hz 930H Wheel Loader FTD00001-UP (MACHINE) POWERED BY C6.6 Engine...
2020/4/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. 5. Install lower main bearing shell (3) into main bearing cap (2). Ensure that the locating tab
for the lower main bearing shell is correctly seated into the slot in the bearing cap.
Note: The lower main bearing shell is a plain bearing that has no oil holes.
Illustration 8 g01341327
6. Lubricate the crankshaft journal and the lower main bearing shell with clean engine oil.
Install main bearing cap (2) to the cylinder block.
Note: Ensure the correct orientation of the main bearing cap. The locating tab for the upper
and the lower bearing should be on the same side of the engine.
7. Lubricate the threads of bolts (1) with clean engine oil. Lubricate the underside of the heads
of bolts (1) with clean engine oil.
8. Install bolts (1) to main bearing cap (2). Evenly tighten the bolts in order to pull cap (2) into
position. Ensure that the cap is correctly seated.
Note: Do not tap the main bearing cap into position as the bearing shell may be dislodged.
9. Tighten bolts (1) to a torque of 80 N·m (59 lb ft).
Turn bolts (1) through an additional 90 degrees. Use Tooling B to achieve the correct final
torque.
7/8
928Hz 930H Wheel Loader FTD00001-UP (MACHINE) POWERED BY C6.6 Engine...
2020/4/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 9 g01341329
10. Check the crankshaft end play. Push the crankshaft toward the front of the engine. Install
Tooling (C) to the cylinder block and the rear face of the crankshaft. Push the crankshaft
toward the rear of the engine. Use Tooling (C) to measure the crankshaft end play. The
permissible crankshaft end play is 0.10 mm (0.004 inch) to 0.41 mm (0.016 inch).
End By:
a. Install the crankshaft rear seal. Refer to Disassembly and Assembly, "Crankshaft Rear Seal -
Install".
b. Install the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump -
Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Apr 25 09:48:58 UTC+0800 2020
8/8
928Hz 930H Wheel Loader FTD00001-UP (MACHINE) POWERED BY C6.6 Engine...
2020/4/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 930H WHEEL LOADER FTD
Configuration: 928Hz 930H Wheel Loader FTD00001-UP (MACHINE) POWERED BY C6.6 Engine
Disassembly and Assembly
C6.6 Engines for Caterpillar Built Machines
Media Number -KENR6081-15 Publication Date -01/03/2014 Date Updated -04/03/2014
i05735310
Crankshaft - Remove
SMCS - 1202-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-8221 Lifting Sling 2
Start By:
a. Remove the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump -
Remove" for the correct procedure.
b. Remove the front housing. Refer to Disassembly and Assembly, "Housing (Front) -
Remove" for the correct procedure.
c. Remove the crankshaft rear seal. Refer to Disassembly and Assembly, "Crankshaft Rear
Seal - Remove" for the correct procedure.
d. Remove the rocker shaft and pushrods. Refer to Disassembly and Assembly, "Rocker Shaft
and Pushrod - Remove" for the correct procedure.
e. If necessary, remove the cylinder head. Refer to Disassembly and Assembly, "Cylinder
Head - Remove" for the correct procedure.
f. If necessary, remove the pistons and connecting rods. Refer to Disassembly and Assembly,
"Pistons and Connecting Rods - Remove" for the correct procedure.
NOTICE
1/4
928Hz 930H Wheel Loader FTD00001-UP (MACHINE) POWERED BY C6.6 Engine...
2020/4/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. If the crankshaft has been reground or if the crankshaft has been
replaced, the height of the piston above the cylinder block must be
inspected. It is necessary to remove the cylinder head in order to
inspect the height of the piston above the cylinder block.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1. The engine should be mounted on a suitable stand and placed in the inverted position.
2. If the cylinder head, the pistons and the connecting rods have not been removed already,
remove the connecting rod bearings. Refer to Disassembly and Assembly, "Connecting Rod
Bearings - Remove" for the correct procedure.
3. Ensure that the main bearing caps are marked for the location and orientation.
Illustration 1 g01341323
2/4
928Hz 930H Wheel Loader FTD00001-UP (MACHINE) POWERED BY C6.6 Engine...
2020/4/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. 4. Remove bolts (1) and main bearing caps (2) from the cylinder block.
Illustration 2 g01341324
5. Remove lower main bearing shells (3) from main bearing caps (2). Keep the lower main
bearing shells with the respective main bearing caps.
Note: The lower main bearing shells are plain bearings that have no oil holes.
6. Remove the two thrust washers from number six main bearing in the cylinder block.
Illustration 3 g01333482
7. Attach Tooling (A) and a suitable lifting device to crankshaft (4). Lift crankshaft (4) out of
the cylinder block. The weight of the crankshaft is approximately 61 kg (134.5 lb).
3/4
928Hz 930H Wheel Loader FTD00001-UP (MACHINE) POWERED BY C6.6 Engine...
2020/4/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Note: Do not damage any of the finished surfaces on the crankshaft. When the crankshaft is
removed from the engine, the crankshaft must be supported on a suitable stand in order to
prevent damage to the crankshaft timing ring.
Illustration 4 g01341389
8. Remove upper main bearing shells (5) from the cylinder block. Keep the upper main
bearing shells with the respective main bearing caps.
Note: The upper main bearing shells have a groove and two oil holes.
9. If necessary, remove the crankshaft timing ring. Refer to Disassembly and Assembly,
"Crankshaft Timing Ring - Remove and Install" for the correct procedure.
10. If necessary, remove the crankshaft gear. Refer to Disassembly and Assembly, "Crankshaft
Gear - Remove and Install" for the correct procedure.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Apr 25 09:49:54 UTC+0800 2020
4/4
928Hz 930H Wheel Loader FTD00001-UP (MACHINE) POWERED BY C6.6 Engine...
2020/4/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 930H WHEEL LOADER FTD
Configuration: 928Hz 930H Wheel Loader FTD00001-UP (MACHINE) POWERED BY C6.6 Engine
Disassembly and Assembly
C6.6 Engines for Caterpillar Built Machines
Media Number -KENR6081-15 Publication Date -01/03/2014 Date Updated -04/03/2014
i05735298
Crankshaft - Install
SMCS - 1202-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-8221 Lifting Sling 2
B 8T-3052 Degree Wheel 1
C 8T-5096 Dial Indicator Gp 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
If the crankshaft has been reground or if the crankshaft has been
replaced, the height of the piston above the cylinder block must be
inspected. It is necessary to remove the cylinder head in order to
inspect the height of the piston above the cylinder block.
1/7
928Hz 930H Wheel Loader FTD00001-UP (MACHINE) POWERED BY C6.6 Engine...
2020/4/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. 1. Clean the crankshaft and inspect the crankshaft for wear or damage. Refer to Specifications,
"Crankshaft" for more information. If necessary, replace the crankshaft or recondition the
crankshaft.
2. If necessary, install the crankshaft gear. Refer to Disassembly and Assembly, "Crankshaft
Gear - Remove and Install" for the correct procedure.
3. If necessary, install a new crankshaft timing ring. Refer to Disassembly and Assembly,
"Crankshaft Timing Ring - Remove and Install" for the correct procedure.
4. Ensure that the parent bores for the bearing shells in the cylinder block are clean. Ensure
that the threads for the main bearing bolts in the cylinder block are clean and free from
damage.
5. Clean the main bearing shells and the thrust washers. Inspect the main bearing shells and the
thrust washers for wear or damage. If necessary, replace the main bearing shells and the
thrust washers.
Note: If the main bearing shells are replaced, check whether oversize main bearing shells
were previously installed. If the thrust washers are replaced, check whether oversize thrust
washers were previously installed.
Illustration 1 g01341389
6. Install upper main bearing shells (5) to the cylinder block. Ensure that the locating tabs for
the upper main bearing shells are seated in the slots in the cylinder block.
Note: The upper main bearing shells have a groove and two oil holes.
7. Lubricate upper main bearing shells (5) with clean engine oil.
2/7
928Hz 930H Wheel Loader FTD00001-UP (MACHINE) POWERED BY C6.6 Engine...
2020/4/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
28. Suggest:
If the above button click is invalid.
Please download this document
first, and then click the above link
to download the complete manual.
Thank you so much for reading
29. Illustration 2 g01333482
8. Attach Tooling (A) and a suitable lifting device to the crankshaft (4). Lift crankshaft (4) into
the cylinder block. The weight of the crankshaft is approximately 61 kg (134.5 lb).
Note: Do not damage any of the finished surfaces on the crankshaft. Do not damage the
main bearing shells.
3/7
928Hz 930H Wheel Loader FTD00001-UP (MACHINE) POWERED BY C6.6 Engine...
2020/4/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...