Caterpillar Cat 416D Backhoe Loader (Prefix BFP) Service Repair Manual (BFP05178-17198).pdf

Service Repair Manual
Models
416D Backhoe Loader

Shutdown SIS
Previous Screen
Product: BACKHOE LOADER
Model: 416D BACKHOE LOADER BFP
Configuration: 416D Backhoe Loader BFP05178-17198 (MACHINE) POWERED BY 3054 Engine
Disassembly and Assembly
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power
Train
Media Number -RENR3578-12 Publication Date -01/04/2010 Date Updated -13/04/2010
i02557471
Transmission (Power Shift) - Assemble
SMCS - 3030-016-PM; 3066-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 152-7055 Spring Compressor 1
B
152-7085 (1)
Transmission Shaft Handler 1
189-0409 Shackle As 1
C 6V-2157 Link Bracket 1
D 8T-5096 Indicator 1
E 1U-5702 Repair Stand 1
( 1 )
CE Compliant
Note: The transmission will be assembled in major components. The major components will then
be assembled.
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned
in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts.
Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are
worn or damaged, use new parts for replacement.
Note: Apply a light film of clean transmission oil to all components before assembly.
1/54
416D Backhoe Loader BFP05178-17198 (MACHINE) POWERED BY 3054 Engine(S...
2019/12/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...

Note: O-rings, gaskets, and seals should always be replaced. A used O-ring may not have the
same sealing properties as a new O-ring. Use 1U-6396 O-Ring Assembly Compound during the
assembly procedure.
Illustration 1 g00731364
1. Install the needle thrust bearings on the shafts. The open end of cups (1) must point away
from the bearings or gears that are contacted.
Reverse Shaft
1. Install seal (195) and the O-ring on piston (195) .
2/54
2019/12/19

2. Install piston assembly (194) .
3. Install spring assembly (193) .
4. Use tooling (A) in order to compress the spring assembly. Install retaining ring (192) .
3/54
2019/12/19

5. Install eight friction discs (190) and eight plates (191) .
6. Install end plate (189) .
4/54
2019/12/19

7. Install retaining ring (188) .
8. Install washer (187) and needle thrust bearing (186) .
9. Install caged roller bearing (185) , the spacer, and caged roller bearing (183) .
5/54
2019/12/19

10. Install gear (184) .
11. Install needle thrust bearing (182) and washer (181) .
12. Heat bearing (180) to 135 °C (275 °F). Install bearing (180) .
6/54
2019/12/19

13. Install two rings (179) .
Input Shaft
7/54
2019/12/19

8/54
2019/12/19

9/54
2019/12/19

8. Install washer (151) and needle thrust bearing (150) .
10/54
416D Backhoe Loader BFP05178-17198 (MACHINE) POWERED BY 3054 Engin...
2019/12/19

9. Install caged roller bearing (149) , spacer (148) , and caged roller bearing (147) .
11/54
2019/12/19

12/54
2019/12/19

14. Install four rings (141) .
13/54
2019/12/19

Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.

14/54
2019/12/19

15/54
2019/12/19

22. Install washer (169) , needle thrust bearing (168) , caged roller bearing (167) , and caged
roller bearing (166) .
16/54
2019/12/19

26. Install ring (161) .
Shaft
17/54
2019/12/19

Caterpillar Cat 416D Backhoe Loader (Prefix BFP) Service Repair Manual (BFP05178-17198).pdf

Recommended

Recommended

More Related Content

Similar to Caterpillar Cat 416D Backhoe Loader (Prefix BFP) Service Repair Manual (BFP05178-17198).pdf

Similar to Caterpillar Cat 416D Backhoe Loader (Prefix BFP) Service Repair Manual (BFP05178-17198).pdf (13)

More from jfksemmdm3e

More from jfksemmdm3e (20)

Recently uploaded

Recently uploaded (20)

Caterpillar Cat 416D Backhoe Loader (Prefix BFP) Service Repair Manual (BFP05178-17198).pdf