4. What had to be changed in our project
What had to be changed in our project was that we had to change our
stop cup because, we had difficult time agreeing. Another thing we had to
change was the base because, the base was unstable so we added sticks
so the roller coaster would not lean. We added a T.P ( Toilet Paper) roll to
the end so it could stand and be stable. Also we had to change the height
of our roller coaster because, the marble kept getting stuck around the
end of the coaster that means it could not come out. We had to put a pipe
on top of the other pipe so it can have a smooth ride.
5. What Worked With The Design
What worked was….
● The project was free standing.
● The marble went down like a roller coaster cart.
● We were able construct the design.
● The roller coaster was steep and the velocity of the marble went down
fast.
● We were able to make the hill we wanted to make.
6. What did we learn from our project
We learned that we had to combined all of our ideas in order to make a
roller coaster that is free standing. Also we learned that making a roller
coaster is a difficult job. Another thing we learned is that we had to have an
acute angle to make the velocity aka (speed) of the marble go faster. Also,
listen to what other people has to say instead of doing it your way. When
you and your team run a project, there are a lot of problems that need to
be managed together and if things don't go right you have to find another
way instead of giving up.