The document discusses new developments in injection molding machinery that will be showcased at an upcoming plastics exhibition. Several companies will unveil new all-electric injection presses and hybrid models featuring faster injection speeds and responses. Suppliers are also introducing innovations in hot runner systems, robots, automation equipment, and process monitoring tools. New models from various manufacturers aim to improve part quality, manufacturing efficiency, and energy savings.

1. Injection molding. - Free Online Library
JSW will bring both its newer J-AD electric models and established J-ELIII series.
News in structural foam originates from Wilmington machinery, whose Lumina LP (Large Platen)
Series features new Versafil impartial nozzle manage pertaining to sequential filling. Miniature
Plastic Molding will demonstrate its new "Wasp" Mini-Jector with regard to small production runs
regarding 100 pieces. Will mold polycarbonate sidelight with black PC bezel on the 1000-ten Maxima
MG 1100 two-platen press together with Milacron robot and also automated component inspection.
From least a pair of suppliers associated with hot-runner systems--Ewikon and also Heitec
(represented simply by Technoject)--will unveil new actuation systems that transfer every valve-gate
needle pin simultaneously. A New TX 60 6-axis robot and Boy 55 VV insert molding press will be
operating with Boy Machines' booth.
NORWELL PLASTICS
Rebuilds and also modifies injection presses along together with other machines. OF CARR LANE
ROEMHELD
ZEIGER INDUSTRIES
MOOG INDUSTRIAL
Introducing CX series little two-platen presses. Furthermore presenting new ACS8 air unit which
regulates air for you to valve-gate pistons along with may always be used along with virtually any
kind of hot-runner system. In Addition exhibiting model L-790 lid stacking system along with stack
accumulation.
SERVTEK-MILACRON
Booth 5761
PASCAL ENGINEERING INC.
INJEX SYSTEMS INC.
Energy-saving all-electric machines will carry on to be a huge draw in NPE, where new designs as
well as upgraded models is planning to be seen in virtually each press maker's booth. Will
demonstrate zero-defect molding using its monitoring tools.
HUSKY INJECTION MOLDING SYSTEMS LTD.
Supplies screws, barrels, tips, as well as mixers.
NETSTAL MACHINERY INC.
Booth 270 (Exhibiting along with Taiwan External Trade Development Council)
Booth 4134

2. EWIKON HOTRUNNER SYSTEMS OF AMERICA INC.
NINGBO HUARE MACHINERY MFG. Any 220-ten Allrounder 570A will demonstrate cleanroom
molding regarding syringes in the 48-cavity tool on a 12-sec cycle. That moyen eDart process
manage having a broader production and also process-monitoring system. New features include a
common interface for Moldflow's Altanium along with Shotscope products, and also new assistance
for viscosity control which improves manufacturing efficiency, component quality, and parts
traceability. This features 0.5-sec takeout some moment and 22-1b payload capacity. Ltd.
Furthermore showing new Higher Energy Broadband servo-electric plasticating along with injection
system regarding presses up to 250 tons. Battenfeld may also demonstrate its Microsystem 50 press.
Offers Smart control along with Max-E-Save technologies in which minimize device energy
consumption approximately 56%.
DSM XPLORE
Booth 7631
Sells devices for you to protectbarrel heaters, wiring, as well as insulating blankets from melt drool.
Booth 9713
Automation integrator along with custom device builder will run an automatic manufacturing cell
just like that will from SPI's Great Plastics works exhibit at Epcot at Walt Disney world throughout
Orlando, Fla. also showing new 1500-ton Bi-Power two-platen machine. representative associated
with Taiwan-based Multiplas, which usually manufactures horizontal along with vertical hydraulic
presses.
Supplies the range of replacement injection molding products, including feedscrews, barrels, as well
as screw-tip assemblies.
Repairs, services, and upgrades many brands of injection molding robots.
Other all-electrics creating their debut are the EX series via Krauss-Maffei that incorporates a new
compact "Z-Lever" clamp style that's mentioned to be simpler as compared to the one used around
the previous Eltec hybrid line. Furthermore showing Priamus Fill and also Priamus Monitor
software.
Booth 5984
U.S. also generates vacuum injection molds.
SAILOR AUTOMATION INC.
WELLTEC MACHINERY LTD.
TECNOMAGNETE
Supplies automation systems depending on parts-removal robots through Ichikoh Engineering inside
Japan and builds custom end-of-arm-tooling.

3. Supplies a new micro-scale (2.5 to 15 cc) injection molder pertaining to lab testing of control of new
materials.
See Asian Plastic Machinery Co.
Demonstrating application diversity involving Allrounder Any electric device series together with
four machines: a 100-ton Allrounder 420A will produce thin-walled cups in a 2.3-sec cycle. Alfa
Series top-entry robots. Rolling out twin-heater nozzles that will incorporate a backup heater within
the same-size package deal as a single-heater nozzle.
Repairs and also rebuilds plastics device controls. Additionally showing its Precision valve-gate
series.
TOYO/MARUKA USA
In addition, Dekuma and also Desma associated with Germany, Rep involving France, along with
Sungjin associated with Korea will display rubber injection presses within the Rubber/TPE Pavilion,
which is creating its first appearance as associated with this show.
In PET preform machinery developments, Netstal will premiere its new Pet-Line 6000-6600R with a
192-cavity mold that can place out 90,000 preforms/hr. Additionally new is actually Under-Vacuum
Nozzle that enables injection in to a cavity together with air evacuated regarding much better filling,
improved finish, and also reduced flash. Showing some other bimetallic barrels, Eagle mixing along
with barrier screws, along with Eagle mixing nozzle.
Introducing compound clamping plate pertaining to heat insulation involving molds, consisting
regarding an insulating sheet bonded between a couple of steel plates. A Amount Of new, up for you
to now undisclosed features is planning to be located on the new ECNII series from Toshiba. a
300/55 US model will create a PP dessert cup inside 6 cavities within 2.7 sec, and a Speed 300/70
model will mold along with in-mold label a PP stadium cup inside four cavities. Furthermore
unveiling in-mold labeling technologies through the visual presentation. New Elion all-electric device
(model 1200-460) will generate PP syringe barrels in the 48-cavity mold.
WESTLAND CORP. and the new Powerline NT model through Milacron features the direct-drive
injection unit.
More electrics and also hybrids
Builds custom injection presses.
Introducing Heitec mechanical valve-gate system using a bar which moves all valve needles
correctly and also repeatably. Showing other valve-gating products, including Melt-Disk technology
pertaining to multi-drop healthcare parts. New network module enables users to always be able to
link 6- or perhaps 12-zone systems together with regard to approximately 24 zones of control.. also
highlighting machinery lines of sister companies Sandretto along with Windsor.
Booth 9463
Supplies OEM and aftermarket machined components like tiebars for presses approximately 6000
tons and also reconditioned clamp ends.

4. HYROBOTICS CORP.
GUNTHER HOT RUNNER SYSTEMS
Lots of new names
Booth 9007
Booth 9962 (Exhibiting together with ABB Robotics)
Displaying barrel lined along with strong C-2 tungsten carbide, a manufacturer new choice for very
abrasive resins. Showing 615-ton El-Exis hybrid molding any PP dipping-sauce container in the 2x24
stack mold on a 4-sec cycle. Motoman provides a fresh look to robots using a model which has two
arms that will perform inside a human-like manner. Appear for first time models through Automated
Assemblies, CBW, Conair, Hyrobotics, Kawaguchi, Sailor, and also Wittmann. Furthermore
introducing any water-cooled gate insert that's easy to install. It reportedly delivers a lot more
power along with higher injection speeds with quicker acceleration when compared with
conventional ballscrew as well as timing-belt arrangements
Celebrating 130 years within existence, creates Freedom Rotator WP hydromechanical two-platen
presses, Freedom Hybrid series with electric screw drive, and also GP Plus number of toggle
machines. Furthermore rolling out VMC series digital controller for closure along with medical
molding, featuring 40 zones involving control and power to retailer along with retrieve 30 mold
options within memory. Demonstrating larger, fully hydraulic Allrounder S series: Any 275-ton
Allrounder 630S will mold any table-tennis bat inside a two-component, hard/soft application, while
any 500-ton Allrounder 820S will mold ABS briefcase shells.
Unveiling QSO Fast Shut-off non-return valve which delivers both high flow and also rapid material
shutoff with regard to part weight consistency. Demonstrating model MR-103 side-entry, high-speed
robot pertaining to little presses. Presenting new Fundamental collection involving hot-runner
nozzles with regard to an extensive array of resins. Will possess video presentation of recent Imprest
in-mold painting technology.
Introducing W 723 CS3 series top-mounted servo robots with telescoping arm regarding low-ceiling
heights. Additionally showcasing Kuka KS shelf-mounted robots.
See Plustech Inc.
MOTOMAN INC.
Showing Mold-Vac mold-evacuation system.
Booth 5915
A.B. In Addition introducing Posi-Melt injection screw in which delivers higher output along with
much better mixing in lower melt temperature. Additionally delivers PET preform machines.
Manufactures hot-runner methods and also valve gates, manifolds, hot halves, heated sprue
bushings, as well as multi-tip systems.
GAIOTTO AUTOMATION

5. TREXEL INC.
News throughout hydraulic presses
TPS TOOLING PREFORM SYSTEMS
Booth 283
DMS
Booth 7907
Sells screws, valves, and bimetallic barrels.
Manufactures screws and also barrels, rebuilds screws, and relines barrels.
Makes bimetallic along with tool-steel barrels.
RJG INC.
Unveiling ECNII all-electric machines boasting faster injection as well as quicker response together
with lower-inertia injection unit, too as lengthier holding-pressure capability and also new V30
control. New Axess 10, 20, and also 30 models get payload capacities from 6.6 in order to 26.4 lb.
Permits shot weights associated with 0.01 g along with cavity spacing regarding 16 mm. Additionally
showing data-acquisition systems.
Booth 3009
Booth 2960
First North American showing associated with a couple of new models regarding Titan large two-platen
presses. Every needle may be adjusted individually, and the actuating bar can be driven by
simply electric motor, hydraulics, or perhaps pneumatics. Designs as well as builds unique
machinery and may supply injection-unit resizing or even conversion to some multi-shot system.
CANTERBURY ENGINEERING CO.
Supplies a complete array of sprue pickers, traversing and articulating robots, and automated
workcell solutions.
Korean supplier regarding hot-runner systems, valve gates, hot halves, temperature controllers,
along with stack-mold technology.
COMET AUTOMATION SYSTEMS
YUSHIN AMERICA INC.
KOSMEK USA LTD.
Offers patented screw designs for resins coming from PVC to end up being able to LCP, too as screw
tips along with non-return valves.

6. Showing magnetic quick-change mold-clamping system together with new mechanical safety device
in order to avoid molds coming from falling. also announcing the partnership along with Imdecol, an
in-mold labeling automation supplier, to be able to offer automated turnkey IML techniques in the
Americas. Furthermore unveiling GSP 20-16 gripper regarding sprue pickers. Equipment
developments pertaining to IML/IMD automation will also be proven through CBW, Haug, Ilsemann,
Imdecol, Integrated Technologies, Ion Industrial, along with Simco. The 50-ton NEX50 model by
having an injection speed associated with 500 mm/sec and also 2.7 times quicker response will
possibly be shown, as well like a 180-ton NEX180 model. screen pendant, with enhanced resolution.
also introducing Engineering & Consulting Div.
Booth 10707
Offers German-designed robot end-of-the-arm tooling produced from off-the-shelf components;
additionally training courses for creating EOAT.
PLASTIC WORLD INC.
Booth 10865
THIXOMAT INC.
Demonstrating three-shot molding within an all-electric press using two involving its Universal
Multishot portable injection units and MGS rotating platen. Additionally presenting new 14-ton
Allrounder 175 V vertical press along with fixed mold table with regard to insert molding.
Introducing Raptor 3000-HP top-entry robot available in single along with double vertical-arm
configurations regarding machines coming from 200 to 800 tons. In Addition demonstrating defect-free
molding of complex gears upon E-Motion 60-ton electric press along with new CC200 controller
along with Decoupled Molding technology through RJG. Demonstrating 450-ton HM 400/2250
having a Unirob RS10 robot and also Unilog B4 control. Will end up being proven with a Staubli six-axis
TX 60 robot as section of an automatic molding cell.
Copyright 2006, Gale Group. each suggestion has a sealing cap produced from a particular plastic
called MurSeal. Incoe's new Manage Gate applies an economical mix of pneumatics along using a
spring loading to run the actual valve. Operating a 700-ton hybrid press using platen-mounted robot
inside production of a mushroom tray. In Addition presenting new Multi-Tip edge-gate nozzle
pertaining to little health-related parts. Unveiling valve-gate system which closes most valve pins
having a synchronized drive plate. Additionally presenting new Priamus Go shopping floor Control,
an expert method information system in which manages process information based on cavity strain
along with temperature signals on the central server. Any 528-ton Canbel 480-3600 model with an
integrated robot will mold hubcaps. It will tend a new Krauss-Maffei KM100CX injection machine.
Furthermore showing Topiv sprue picker, automated insert loaders, and a mold-release sprayer.
DIMA INC.
Booth 1802
YUDO INC.
Taiwanese supplier associated with all-electric along with hydraulic toggle and two-platen machines.

7. Demonstrating an automatic molding along with assembly cell much like that will from SPI's Great
Plastics works exhibit in Epcot in Walt Disney World. The Particular new Elion line via Netstal
features any cam-like toggle clamp that will shrinks the machine's general size.
ALBA ENTERPRISES INC.
Booth 1485
Offers Powershot self-contained energy-saving bundle involving hydraulics as well as servo-electrics
to drive and also manage the injection side in the molding press. Features new hand-held mold
monitor and new 6.5-in. A New SynErgy 3500-2150 will mold 65,000 closures/hr inside a 72-cavity
mold on a 4-sec cycle. also showing newly upgraded Milacron Fanuc Roboshot S2000i-B all-electric
press using wider tiebar spacing, faster controls, and also acceleration through 0 in order to 300
mm/sec (500 mm/sec optional) within less than 36 millisec. Almost All rights reserved. Sandretto will
be bringing the particular Freedom HES, the result of the collaboration with its sister company,
HPM. includes PID auto-tune temperature control along with sequence logic. Furthermore
introducing Slimline ceramic-insulated valve-gate nozzle using simply 8mm diam. Mixing-screw
simulation will be demonstrated on the plasma screen within the booth. Booths 1702, 1715
(Exhibiting with Milacron)
ATHENA CONTROLS
Booth 4687
INCOE CORP.
Booth 5171 ((Exhibiting with Digital Technologies)
Rolling out SVR B-50 side-entry, high-speed robot regarding vertical presses up to 150 tons. Engel
will demonstrate defect-free molding utilizing an E-Motion all-electric press, new CC200 controller,
as well as Decoupled Molding technologies via RJG.
CONAIR
Makes linear robots, end-of-arm tooling, and also turnkey automation systems.
Booth 2149
DIGITAL TECHNOLOGIES
AEC INC.
MIGRANDY CORP.
Booth 1355
CAE SERVICES CORP.
A new clamp design, an injection unit effective at lengthy holding pressures, and also all-digital
servo manage are a portion of the newest MD-X series from Niigata, which usually may also current
its wide-platen electric MD-W series. "Y-Free" perform enables programmed release of the actual

8. strip-axis motor with regard to load-free ejector tracking. It will mold the two-component portion by
having an add-on second injection unit through Ferromatik Milacron. LTD.
Booth 2932
SEIKI VALVE & SPEAR SYSTEM DIV., MITSUI PLASTICS
MULTUECT LLC
See Fortune International.
Booths 1702, 1715
Booth 1470
DYNAMIC METAL TREATING INC.
ASIAN PLASTIC AMERICAN INC.
Booth 5780
Spanish firm provides Tecnomak horizontal toggle machines via one hundred for you to 3000 tons.
Nissei will demonstrate its new energy-saving XPump hydraulics on a FNX140 hybrid press. The
Actual business will also existing info on a manufacturer new two-platen hybrid concept known as
NextGen for big strong and foamed parts that will reportedly eliminates material degradation along
with improves melt uniformity.
CINCINNATI MILACRON
Booth 5066
Supplies Crucible Particle Metallurgy (CPM) goods as difficult facings with regard to screws,
barrels, and also non-return valves.
Booths 1702, 1715
Booth 5975
Supplies device vision for industrial software such as high quality inspection, procedure monitoring,
and also mold protection.
REIS ROBOTICS USA INC.
Booth 341
NISSEI AMERICA INC.
SODICK

9. Introducing X-nozzle valve gates, SXpress single-nozzle package, and also single In-Line valve gate.
SYN-GENUITY SOURCING CORP.
Booth 4265
EPCO LLC
ANIMEX CO.
Booth 1391
Announcing partnership with Rhodia in order to develop MuCell microcellular apps with regard to
Rhodia's Technylstar nylon six and also 66. the 28-ton HM 25/130 will produce acetal double
cogwheel inside a four-cavity mold and also 8-sec cycle. Machinery.
Introducing UMC8 digital controller with color touchscreen for low-cavitation molds (up to 48
zones). also molding foamed automotive door panel by utilizing an Ultima UN 110-ton model
utilizing Ube's Ecofoam method which compresses ambient shop air. and Kuka is providing a new
computer software package regarding injection molding features in which eases robot integration
together with injection machines through one hundred to be able to 6000 tons.
A certain target regarding robotic automation can be in-mold labeling as well as decorating (IML,
IMD). also showing injection screws, barrels, as well as other non-return valves, as well as video
involving patented ICU injection unit.
Booth 2160
Introducing TP-2006 top-entry robot together with new wrist mechanism. This regulates load as well
as peak energy utilization of the hot runner system to reduce energy cost. Introducing MuCell
smooth-surface tooling technologies regarding HIPS as well as ABS.
Korea-based firm will be unveiling HIT Series all-pneumatic 4-axis traversing robot. Engel will be the
first machine builder to guide RJG's Decoupled concept along with special screen displays embedded
inside the control logic. MANNER INTERNATIONAL LP
Booth 3206
New U.S. In Addition showing examine rings and also non-return valves via CMD.
UBE MACHINERY INC.
Booth 4798
Booth 10710
Introducing Allrounder C Golden Edition machine developed for you to celebrate company's 50th
anniversary. Suited to machines as significantly as 275 tons.
Booth 10101

10. DIAMOND AMERICA CORP.
Booth 6343
DESMA
Will showcase several new hot-runner products and also mold components.
Rolling out its very first injection molding process monitor. Portion will be handled with a 6-axis
robot on the fixed platen.
ION INDUSTRIAL
Innovation in hot runners
Unveiling electric-drive valve-gate nozzle, being demonstrated on the Toshiba all-electric machine.
Furthermore introducing CeUtrack 2.1, its most recent real-time production management system; a
new 155-zone Altanium hot-runner manage that will mounts straight on the mold, removing extra
cables; and Moldflow Communicator 1.0, a completely free new product that permits outcomes
regarding flow simulation studies being shared by almost all members of the project team.
Booth 1380
POWERTECH COMPONENTS INC.
ABB INC., ROBOTICS, AUTOMOTIVE AND MANUFACTURING GROUP
See Milacron Inc.
IMG PLASTEC CO., LTD.
Booth 976
Supplies temperature controls along with accessories regarding hot-runner molds.
ASCON CORP.
KAWAGUCHI INC.
IMDECOL
EXTREME COATINGS, DIV. Additionally introducing PLC+2 retrofit controls designed for you to use
inverter motors to offer gantry robots low-end servo-motor speeds in lower cost when compared with
full-servo systems. Furthermore unveiling SVPL hot-runner valve using manifold assembly, featuring
a new side-action piston for reduced mold stack height plus precision alignment in between valve,
pin, and also gate. several press makers, for example Demag, Engel, Fortune, Husky, Krauss-Maffei,
along with Netstal will demonstrate IML/IMD applications. New HCS 2 temperature control is
significantly more compact as well as economical than prior models and makes use of internal bus
communications as well as plug-in modules with regard to less difficult upgrades. Features direct-drive
motors for both injection and also clamping; mold open/close speeds associated with 1300
mm/sec; new twin-cylinder nozzle-touch system; as well as new SM screw. It will allow users to view

11. task status from the remote area via an internet browser. in China, which in turn builds horizontal
toggle machines via 120 to be able to 480 tons, as well as multi-color machines.
The information in hot runners appears to end up being able to concentrate on valve gates.
Furthermore introducing upgraded hot-runner control using temperature adjustment within
0.1[degrees] increments with regard to finer control. Gear molding cell (a joint display along with
molder Winzeler Gear) consists of automated inspection and also assembly.
Showing newest Ringelflow and also Maxiflow "cashew gate" components pertaining to rear-surface
gating.
Booth 10546
SHANGHAI KLN TECH. Provides experience of in-mold labeling, insert loading, and cleanroom
along with stack-mold operations.
UNIVERSAL MULTISHOT SYSTEMS
Introducing Ni Boride nickel boride coating for abrasion resistance along with lubricity on screws
and also tips.
Canadian firm can have programs associated with articulated-arm robots within handling parts as
well as inserts.
TOSHIBA MACHINE CO. A.B. wall throughout six cavities, said to be impossible using conventional
high-speed machines. LTD.
SURFACE ENGINEERING & ALLOY CO.
Numerous European and also Asian OEMs are coming in order to NPE in order to raise their
particular profile throughout North America. Displaying Si-110III as well as Si-400III all-electric
presses in addition ET90VR2 electric vertical press with in-line vertical injection.
Booth 4170
Supplies hot-runner systems and components coming from nozzles to valve gates.
STAR AUTOMATION
Introducing most recent version of 5 Step Procedure software program regarding mold-balance
analysis along with filling diagnostics. In Addition introducing pneumatically operated SV25 mini-valve
pertaining to gating down to 25 mm.
ATS END-OF-ARM-TOOLING
CRUCIBLE SERVICE CENTERS
HFA HARVARD FACTORY AUTOMATION
Supplies mold-clamping and quick-mold-change systems.

12. Booth 2549
Custom engineers hot-runner nozzles, manifolds, along with temperature controls. also showing any
TM 100/525 hydraulic toggle press molding a PC flashlight reflector inside a 10-sec cycle along
using a Microsystem 50 molding a 0.005-g bio-absorbable vascular clamp having a 0.4-mm wall.
Booth 926
Offers metal treating services regarding hardening screws and also barrels.
Booth 10864
Taiwanese builder associated with injection machines: HRN group of toggle presses from one
hundred to 400 tons; HDC coinjection models using rotary table, 140 in order to 500 tons; and also
HRQ hydraulic accumulator models coming from 140 in order to 400 tons.
Represents Borch Machinery Co. Platen sizes as significantly as 110 x 200 in. LTD.
Showing an automatic in-mold labeling system.
Introducing Engel Duo Combi M multi-component molding technologies pertaining to large-area
parts along with internal molded-in seals as well as gaskets. Displaying Multishot rotary stack-mold
systems, too as conventional molds.
SUMITOMO PLASTICS-MACHINERY
HILMA DIV. Furthermore showing hot-runner nozzles, manifolds, and also temperature controls.
Hybrid presses that will employ electromechanical, electro-hydraulic, or even all-electric clamping
will possibly be offered simply by Dima, HPM, Husky, Meiki, DPG, Mitsubishi, as well as
Plustech/Sodick. Furthermore showing screws, barrels, along along with other front-end
components.

13. Booth 9733
INTERNATIONAL TEMPERATURE CONTROL
Booth 518
Introducing gas-dosing station as well as gas-assist nozzle. supplies nitrogen generation systems,
gasoline compressors, gasoline injection nozzles, in-article gas pins, as well as other accessories.
BEAUMONT TECHNOLOGIES, INC.
Patrick Plastics Corporation is supplier regarding Plastic Machining, Plastic Screw Machining, CNC
Plastic Machining, Tight tolerance Machining, Plastic Injection Molding located in Illinois,USA.
Booth 4261 (Exhibiting together with Uni-Therm)
Showcasing new valve-gate nozzle pertaining to side injection regarding syringes, pipettes, and
other tube-shaped parts. also showing network capability and also eDart process-control system.
Some Other suppliers involving preform methods in the show consist of Luxber along with IMG
Plastec.
Introducing bimetallic barrel liners through InJex systems and extremely wear-resistant carbide
alloys from Surface Engineering & Alloy. Demonstrating an entire IML molding cell.
Taiwanese firm materials CLF-T series involving horizontal toggle presses through 80 to 3500 tons.
DURATHERM PROCESSING SYSTEMS
HUARONG PLASTIC MACHINERY CO., LTD.
Booth 7227
PRESMA CORP.
COPYRIGHT 2006 Gardner Publications, Inc.
No portion want to recognize , could be reproduced without having the particular express created
permission from the copyright holder.
Booth 332
Booth 2102
D-M-E
Booths 4003, 4297
Running VS 130 injection device along with in-mold labeling.
Announcing a new relationship with software partner Intouch to provide an integrated, web-based
process-control along with production-monitoring system. Introducing latest Raptor Vision computer

14. software pertaining to product detection and inspection, that communicates with all the Raptor
controller through net connection.
Introducing AB-400 floor-standing semi-automatic injection machine using 5-ton clamp along with
two-stage injection capable of as significantly as 12,000 psi and 0.5-oz shot size.
Booth 10320
HASCO AMERICA INC.
Booth 5191
TOP GRADE MOLDS
Supplies injection screws, screw tips, nozzles, along with plastication units.
MINIATURE PLASTIC MOLDING
Unveiling PE-300 mold-monitoring vision system for mold protection and also parts inspection. Will
get methods inside the booths involving Engel, Sumitomo, Haitian, Nissei, along with Toyo.
ASIAN PLASTIC MACHINERY CO. LTD.
MITT, MOLD HOTRUNNER TECHNOLOGY
Makes check rings and non-return valves.
WINDSOR FEEDSCREWS INC.
Booth 1240
Booths 2132, 2140
ILSEMANN AUTOMATION
Booth 1491
Booth 955
REP CORP.
Booth 4446
Showing new Rheo-Pro NO4 micro-molding nozzles pertaining to component weights via 0.01 to 1 g
along with hot-tip gating. A New 55-ton Allrounder 320A will mold LSR wire insulators in a 144-
cavity mold.
MOLD-MASTERS LTD.
SANDRETTO, Any TAYLOR'S COMPANY

15. MOLDFLOW CORP.
Booth 549
Booth 7228
Introducing ChargeMaster electrostatic charging system pertaining to in-mold decorating.
MASTIP TECHNOLOGY LTD.
Booth 4256
There will be also new vision methods pertaining to portion or even mold monitoring from
Automated Assemblies, Avalon, Comet Automation, along with Logic One.
Manufactures as well as markets PET molds as well as hot-runner systems.
Distributes MRO supplies, auxiliaries, as well as components for injection molders.
Booth 1491
Offers meter-mix equipment pertaining to liquid silicone rubber. New developments appear
throughout boldface type.
Introducing two-zone LED controller regarding little hot-runner systems like single-cavity molds.
New side-entry models is planning to be shown simply by Ilsemann along with Yushin, and also
sprue pickers by simply Sailor. (Also being exhibited with Haitian, Sumitomo, along with Toyo
booths.)
Taiwanese firm delivers Supermaster collection associated with two-platen horizontal toggle
presses, Jetmaster toggle as well as hydraulic presses, and Chen Pet machines for PET preforms.
Manufactures feedscrews for any wide array of molding applications.
OSCO INC.
Booth 708
Supplies hot-runner temperature controls.
First demonstration by Milacron regarding molding auto glazing (in cooperation with Exatec). May
notice little parts as well as part details (flash, non-fills, contamination) throughout 0.03 sec.
Additionally introducing Screwed Nozzle series, which in turn screw immediately into the manifold
so there is certainly zero contact involving the mold as well as the nozzle's cap. Additionally showing
manifold system, hot halves, multi-tip nozzles, as well as stack-mold valve-gate techniques injecting
through the parting collection rather than through a sprue bar.
See MGS Manufacturing Group.
Supplies custom turnkey PET preform coinjection methods with regard to barrier containers.

16. DEMAG PLASTICS GROUP
Booths 1702, 1715
Other Demag presses will possibly be demonstrated in booths regarding SPI (molding Plastic
fantastic Functions robot), Spirex (Twinshot coinjection), Bauer Plastics Technologies (gas assist),
and also Syscon-PlantStar (plantwide communications).
HEKUMA GMBH
Booth 6352
Booth 10945
Booth 9825
BOY MACHINES INC.
Booths 9640, 9646
CHUAN LIH FA MACHINERY WORKS CO. Krauss-Maffei will unveil its CX series. LTD.
Booth 4401
Booth 2538
Booth 9714
Booth 7415
EUROIMPEX S.R.L.
Booths 2115, 2127
RANGER AUTOMATION SYSTEMS Booths 3149, 3249, 3257
Indian firm supplies hot-runner temperature controls.
Booth 11224
Booth 7306
ENGEL
Makes runnerless mold components.
Automation techniques integrator.
Booth 9255
ZHEJIANG SOUND MACHINERY MANUFACTURE CO. Some Other new valve-gate components is

17. going to be offered via HRSFlow, D-M-E, Manner, Mastip, MHS, Mold-Masters, Osco, Polyshot, PSG,
Seiki, Softline, Spear, as well as Yudo.
Launching the hot-runner system for big parts which is pre-assembled, utilizes off-the-shelf
components, but minimizes mold size. all models get direct-drive toggle clamp pertaining to higher
damping speeds. INC. Additionally unveiling a fresh mold identification capability regarding its TTC
hot-runner controls whereby the actual mold and also its operating parameters tend to be
automatically identified through the controller. a 44-ton Allrounder 470 C will mold medical devices
at the show. In Addition introducing Boy 55W 60-ton vertical-injection/vertical-clamp device for
insert molding. LTD.
NIIGATA ALL-ELECTRIC MOLDING MACHINES
KELM ACUBAR
GAMMAFLUX
KISTLER INSTRUMENT CORP.
Booth 5171
Introducing programmable robot end-of-arm-tool that enables the consumer in order to change the
spot of the suction cups. New 1100-ton Titan together with Multiplug add-on injection unit will mold
a multi-component auto part. DRAY MFG. Gale Team is really a Thomson Corporation Company.
HAITIAN MACHINERY CO.
PRIAMUS SYSTEM TECHNOLOGIES AG
Booth 1335
Supplies Wasp Mini-Jector (12 to end up being able to 13 tons) with regard to tiny production runs
associated with 100 pieces. The 70-ton model will generate medical syringes via LSR. also showing
cavity stress sensors along with process-monitoring software. The Speed device inside the booth of
Best Grade Molds will even demonstrate in-mold decorating.
Also demonstrating "Cube" rotary-center-platen stack molding regarding multicomponent parts on
K-tec press via Ferromatik Milacron together with Foboha four-sided mold.
Booth 5783
SPIREX CORP.
Supplies four-stage servo takeout robots along with end-of-arm-tooling for PET preforms, as well as
complete PET preform production cells.
If you pls i want total informqation abiut (Kawaguchi 7502 A New ) injection machine
Booth 9652
GAIN TECHNOLOGIES

18. Booth 1235
Booth 5466
Introducing in the U.S. Arburg will introduce its new All-rounder C Golden Edition press line.
Additionally displaying a two-shot setup using a 210-ton press along with integrated robot.
Booth 9940
New hot-runner temperature controls will probably be announced by simply Fast Heat, Gammaflux,
along with Moldflow. SAS features new replaceable EOAT with regard to pickers along with
"programmable" tooling for gantry robots that will changes the particular positions of the suction
cups for several jobs.
Among new two-platen units, Demag is actually showing Titan 1100- along with 1500-ton models.
along with shot sizes as much as 300 lb. OF SURFACE ENGINEERING & ALLOY
HRSFLOW HOT RUNNER SYSTEMS
Booth 3214
ZHANGJIAGANG HUAFENG HEAVY-DUTY EQUIPMENT MANUFACTURING CO. Machinery
(represented simply by Quantum Machinery International) and also Welltec via Hong Kong; Asian
Plastic Machinery, Chuan Li Fa, Huarong, and also Multiplas (represented simply by New Pacific)
associated with Taiwan; Luxber associated with Spain; Presma associated with Italy; as well as IMG
Plastec, a new German/Polish supplier regarding machines built in the Way East.
Booth 6345
Booth 4002
SIEMENS ENERGY & AUTOMATION INC.
Booth 483
Booth 4261
Booth 11054
Unveiling larger models associated with Axess Series top-entry beam robots with new touchscreen
control. Additionally rolling out new Hurricane family of feedscrews, with new patented mixing
section in which maximizes chaotic mixing although additionally becoming self-cleaning. Will
furthermore demonstrate procedure control using a 1946 Van Dorn press instrumented along with
cavity-pressure sensors. In Addition cleans as well as repairs hot-runner systems.
Introducing its fifth generation all-electric presses, boasting extended hold-time capability and also
extended mold height. In Addition showing hot-runner techniques and controls regarding
micromolding, two-shot molding, and engineered materials.
Booth 1849

19. V-TEK MOLDING TECHNOLOGIES, INC.
MILACRON INC.
Booth 2175
Builds structural-foam and also structural-web molding systems.
Include molding machines, controls, robots, QMC systems, and hot-runner components. Initial North
American showing associated with 385-ton IntElect all-electric machine, molding PP rear valance for
your Roush Racing Mustang inside 70 sec. Milacron will present its "Cube" technology for your
initial time, utilizing a K-Tec press along with four-sided rotary center-stack mold via Foboha. Nissei
will show a new Elject DCE electric press created for two-color molding. OF TEXAS
Booth 2660
JR AUTOMATION TECHNOLOGIES LLC
JSW PLASTICS MACHINERY INC.
Introducing its new RZ-VE high-speed all-servo top-entry robot, featuring new Vibration Suppression
control. one will mold any two-component contact-lens case via PP and also TPE in a 10-sec cycle.
Offered here by simply Actus Automation, X-flex consists involving wedge-shaped modules for
individual secondary operations that are served by means of a parts-removal robot. firm provides
injection units, rotary tables, tooling, special software, and finished turnkey systems with regard to
multi-component molding. Additionally showing SynErgy 5000-5500E device molding a 32-oz
stadium cup throughout 6 cavities along with in-mold labeling making use of lenticular-fllm labels.
Additionally showing HPS-C TS hot-runner controller along with entire selection of 240V, externally
heated HPS III hot-runner systems.
Booth 2115, 2127
KRAUSS-MAFFEI CORP.
Booth 2502
FLUID AUTOMATION INC.
Booth 522
DEKUMA GMBH
Introducing prewired 5-, 8-, or even 12-zone mold junction box to speed hot-runner wiring.
ARBURG INC.
Booth 7415
NEGRI BOSSI USA
Introducing wire-mesh robot guards along with operator access doors in which use a safety interlock

20. switch (standard) tied into the robot or press.
Booth 3045
Showing new Moldflow Plastics Xpert (MPX) version 4.2 system for automating setup, optimization,
and also power over the molding process. Chen Hsong and Dima will also show hydraulic toggle as
well as two-platen machines. Hasco will even display a fresh multi-tip system featuring a fresh tip-seal
technology that uses a sealing cap coming from a unique plastic.
Booth 2570
Supplies quick-mold-change systems, hydraulic clamping systems, and hydraulic valves.
Catalog distributor involving MRO molding supplies.
WITTMANN INC.
World premiere of Pet-Line 6000-6600R PET preform system together with 192-cavity mold
producing 90,000/hr. Additionally showing new Elject DCE140 electric press molding two dissimilar
materials using a rotating mold. Will additionally demonstrate TempMaster Series hot-runner
controls.
SPI FANTASTIC PLASTICS WORKS
Booth 3257
Introducing ET-90HR4 all-electric, four-station vertical press along with horizontal injection.
MACHINERY
Booth 9020
Supplies injection machines pertaining to molding magnesium alloys utilizing its patented Thixomat
technology.
Introducing miniature cavity-pressure sensors which are calibrated following they may possibly be
assembled. Will operate a couple of molding machines along with custom automation on each--one
extracting pipettes, and another stacking along with racking directly into trays.
Also rolling out all-electric Powerline NT along with new direct-drive injection unit that will
minimizes noise and also inertia, as well as new Mosaic controls. also showing newest RobotWare-
Plastics software program that shortens robot programming occasion approximately 50% having a
seven-step wizard. With Regard To example, your brand-new Canbel VE line via Negri-Bossi replaces
its Elma series with direct-drive injection along with toggle clamping (now even upon larger sizes)
for faster movements. In Addition showing an improved nitrogen-generation system.
FORTUNE INTERNATIONAL INC.
Booth 2616
Offers sprue pickers, traversing robots, end-of-arm-tooling, along with downstream automation.

21. Booth 9246
BAUER COMPRESSORS/ BAUER PLASTICS TECHNOLOGY GROUP
Booth 9925 (Exhibiting using Korea Die & Mold Business Cooperative)
Manufactures standard and custom change boxes regarding manage of one for you to 208 zones in
most connector configurations.
Booth 5139
PLUSTECH INC.
Booth 1425
Introducing Boy 55Ae 60-ton device using servo-electric screw along with eject-on-the-fly function
achieved using a double-pump hydraulic system. Battenfeld will existing its upgraded HM series
along with higher injection pressures. All-electrics together with direct drive (instead involving belts
or perhaps gears) on injection units and/or clamps is yet one trend apparent in a range of machinery
OEMs. It will mold eight pieces of your robot toy in the single shot and then robotically decorate as
well as assemble the toy.
MOULD-TIP PLASTIC TECHNOLOGY CO., LTD.
Booth 4798 (Exhibiting along with Syn-Genuity Sourcing)
BATTENFELD OF AMERICA
Booth 5908
Introducing As well as hot-runner nozzles, which usually reportedly provide 20% to always be able to
30% power financial savings because of in order to improved materials regarding body, tip, and
finish ring, as well as new geometry for guidelines and also end bushing. Additionally unveiling 140-
ton FNX140 hybrid machine with new XPump hydraulic system.
Canadian firm provides the PT-U line of horizontal toggle presses from its Hong Kong parent or
guardian company, L.K. Additionally offering new Xaloy JCP 1760 Jet Cleaner pertaining to screw
cleaning.
See Milacron Inc.
Introducing any barrier screw design, APV series mixing valves, as well as interlocking valves. These
kinds of contain new wide-platen electric models.
NICKERSON MACHINERY Booths 1702, 1715 (Exhibiting with Milacron)
Supplies take-out robots along along with other automation pertaining to injection molding.
KORTEC INC
Showing new Smartbarrel mechanical don measurement with regard to screws and barrels that will

22. not require removing the screw. New Rheo-Pro NO5 close-pitch valve gate features gate-to-gate
distance of 25 mm. Any 1500-tonner will create any Roush Racing F-150 front spoiler, using a Kuka
6-axis robot with regard to part removal as well as secondary operations. Furthermore introducing
AccuValve valve gate that is simpler for you to integrate for the mold maker, particularly for high-cavity
applications. It will be demonstrated on an Engel 3-axis robot and Kuka 6-axis robot.
Additionally demonstrating EX all-electric model; holographic in-mold labeling of the 22-oz stadium
cup on a C3 Sprinter machine; along with KM 100-6100 Injection Molding Compounder (IMC)
producing an auto front finish from long-glass PP. Additionally materials in-mold lamination
processes as well as stack-mold technology.
Booth 5139 (Exhibiting throughout Rubber/TPE Pavilion)
New valve gate system will be demonstrated in Engel's booth throughout an ultra-thin-wall
application utilizing Engel's high-pressure X-Melt process. Additionally offers quick-change
hydraulic ejector couplings.
AXIUM INC.
Showing new F series nozzles along with quick -delivery manifolds. That will mold eight pieces of a
robot toy in a single shot and then robotically decorate and assemble the toy using the aid regarding
six-axis robots.
Also showing E-Motion 200 T all-electric device together with patented X-Melt high-speed injection
technology. Latest upgrades for you to HM series raise injection pressures in order to 42,630 psi
along with injection speeds to 300 mm/sec. Hekuma will show your X-flex system coming from
Animex involving Sweden. LTD.
Hong Kong builder of injection machines through 80 to always be able to 2800 tons.
HEITEC HEISSKANALTECHNIK
NPE guests will find that hydraulic press technology is actually not even close to standing still. That
will mold the beverage container along with 0.0065-in. Additionally showing new automation
pertaining to in-mold labeling.
STERLING INC.
Introducing IRM 6650 top-mounted robot for loading/unloading injection molding machines. and
Engel will launch its Engel Speed toggle press with regard to high-speed, thin-wall applications.
Introducing "Right-Sized" injection units consisting involving barrel, end cap, screw, non-return
valve, heaters, thermocouples, and barrel covers, supplied inside a single crate, assembled and
ready in order to install. New vertical machines include Boy's 55VV (vertical/vertical), Milacron's up-to-
date Magna V, and Toyo's all-electric ET-90HR4.
Booth 10942
Booth 7537
Showing new models inside Elject NEX all-electric series featuring enhanced clamp-force feedback
control, higher injection speed, quicker response, and also upgraded TACT controller. Sumitomo's

23. new SE-HS number of mid-sized high-speed machines feature direct-drive methods with regard to
injection and also clamping and are designed for high-speed applications requiring 1300 mm/sec
mold-open/close speeds. Introducing vision part-inspection system that may detect flash along with
short shots, check portion dimension as well as color, and also sort and also count parts. Two-stage
sliding arm adds speed whilst being more compact.
Also showing structural-foam machines; "Aftermarket Center" pertaining to equipment services,
packages, and components; and also machine rebuilding/remanufacturing capabilities.
MITSUBISHI-MHI INJECTION MOLDING MACHINERY INC.
Booths 1702, 1715 (Exhibiting with Milacron Inc.)
Introducing Pulse Waterfall technologies pertaining to Pulse hot-runner controller. also displaying
HTK two-platen (1200-ton) model and also HTW toggle (300-ton) press. Exhibiting Virtual AC
Intelligent Static Neutralizers with regard to long-range neutralization with out air.
PLASTIC PROCESSING TECHNOLOGIES, LLC
Booth 4587
Booth 1402
TECHNOJECT MACHINERY CORPJ HEITEC HEISSKANALTECHNIK
Develops automation for example tool changers, and also robotic collision sensors.
LOGIC ONE ROBOTS
Will mold the 20-liter HDPE container by using an Ultima UN 720 wide-platen all-electric high-speed
press. Up in order to 63 molds could be connected to any single controller. Furthermore discussing
new NextGen huge two-platen hybrid machines that will utilize single or dual extruders along with
two-stage injection regarding producing huge sound and also foam parts up to 150 lb.
Booth 1870
Booth 4798 (Exhibiting along with Syn-Genuity Sourcing)
Chinese producer regarding injection machines through 66 in order to 2204 tons, offered here
through W.Z. In Addition exhibiting HP50 robot together with NX100 controller in a packing
application utilizing a multifunction gripper.
Booth 8315
KUKA ROBOTICS
Offers robots and also automation methods for molding operations. Displaying Thermoplay hot-runner
systems, Vega hydraulic cylinders, as well as mold components.
Booth 5485

24. SIMCO INDUSTRIAL STATIC CONTROL
CHEN HSONG GROUP
Unveiling Manage Gate, a new valve gate controlled by means of a mechanical spring and also
pneumatics. & EQUIP., LTD.
Booth 4153
Featuring all-electric servo-drive molding machines--both new J-AD model and also active J-ELIII
series--as well as a full line regarding horizontal presses along with completely hydraulic as well as
toggle clamp.
CONFORMA CLAD INC.
Unveiling new edition involving Mosaic manage using color touchscreen, improved ergonomic
displays, wireless communications, along with flash memory instead of a hard-disk drive,
consequently simply no backup power supply is actually needed.
PRO SYSTEMS LLC
Booth 10748
Booth 8228
Booth 2649
Booth 4031
CENTERLINE AUTOMATION SERVICES, INC.
Italian sister organization regarding Negri Bossi supplies articulating-arm robots with regard to
parts removal as well as handling.
JDV PRODUCTS INC.
Introducing Canbel VE all-electric machines in 11 models through 77 for you to 935 tons. 4336
Booth 9264
Booth 1380 (Exhibiting with Fortune International)
ATI INDUSTRIAL AUTOMATION
R. In Addition rolling out any valve-gate sequencing controller that is compact and utilizes 50%
much less power compared to additional controllers. Additionally showing new MC-mini-coil nozzle
heater using stainless-steel sheath as well as low-profile design.
Makes rubber injection machinery.
Booth 5733

25. Offers DMH range regarding hydromechanical two-platen presses, DMT hydraulic toggles, and also
Hytoggle electric models.
Introducing 28-ton along with 450-ton models throughout HM two-platen series. Will demonstrate
QMC utilizing Staubli magnetic mold clamps and a tierod puller.
Booths 9249, 9252
INTEGRATED TECHNOLOGIES INTERNATIONAL
Booth 1449
Introducing Performance Series Nozzle (PSN), which reportedly delivers higher throughput despite
a reduced footprint in the mold along with generates much better gate appearance. Machinery will
show its AB-400 floor-standing semi-automatic press for parts as significantly as 0.5 oz. Represents
Plasdan of Portugal.
Showing line associated with servo-driven robots and also end-of-arm-tooling components.
Chinese-based firm supplies generic hot-runner methods as well as custom components.
LUXBER S.L.
QUANTUM MACHINERY INTERNATIONAL
NORTHERN SUPPLY CO., DIV. An 88-ton Allrounder 420A will mold any two-component ice scraper
involving LSR along with PC. also providing new Alba cold-runner systems and new Period Saver
terminal boxes. In Addition molding two-component LSR/PBT part with an all-electric Engel E-Motion
110 Combi US model. The Particular electric J-AD series coming from JSW delivers injection
speed as a lot as 800 mm/sec having a new high-speed option. Additionally showing the Starline
edge-gate nozzle, miniature hot runner systems, and furthermore the Easyline hot-runner nozzle.
AUTOMATED ASSEMBLIES CORP.
Booth 116
STAUBLI CORP.
Makes traversing linear robots along with articulating-arm models, as well as turnkey automation
regarding portion takeout and also handling.
CMD INC
Introducing automated turnkey manufacturing cell for tiny parts where any robot handles almost all
mold-related along with downstream automation tasks. Additionally showing interactive display
involving PET preform molding technology.
Booth 1432
Booth 7420

26. Introducing "SIMPLE" retrofit controls according to Allen-Bradley PLCs, which permit various makes
associated with older robots being retrofitted together with cost-effective electric inverter motors
for higher speed and also repeatability. ALBA Enterprises and Athena Controls are usually showing
new junction boxes that ease hot-runner wrong.
Supplies electrostatic charging methods regarding in-mold labeling.
SUNGJIN MACHINERY CO. Materials power Miser energy-saving, variable-frequency, variable-speed
drive regarding hydraulic pumps and plant drinking water as well as air systems.
Booth 5191
Introducing unique valve gate system regarding automotive lenses which uses a replaceable gate
insert to get rid of gate wear. In Addition introducing RX-8E swing-type sprue picker using linear
guides for further precise positioning.
INSOL INC.
Booth 4043
SOFTLINE CORP.
Small units will even be about display. CO. Will Come in pneumatic and also hydraulic versions
together with plunger or even reciprocating screw.
Booth 4490
Booth 8411
Booth 4975 (Exhibiting with Best Grade Molds)
XALOY INC.
Showing new extreme Coatings (tungsten carbide within nickel/chrome/cobalt binder) with regard to
feed screws and also check-ring/tip assemblies.
Unveiling Injection Molding function Package Deal with regard to robots that eases robot integration
straight into virtually any injection molding device coming from 100 for you to 6000 tons with
minimal installation as well as engineering time. Unveiling Engel Speed collection involving fast-cycling
hydraulic toggle machines. Introducing 8th Edition Cylinder & Screw Handbook. they consist
of Borch Machinery (represented by simply Norwell Plastics) Ningbo Huare, Zhangjiang Huafeng,
along with Zhejiang sound via China; L.K. Will show an FTB energy-efficient model.
Chinese supplier involving hot-runner methods as well as controls.
Unveiling 7-axis IA20 articulating-arm robot with a 44-1b payload. offers the wide selection of
replacement screws.
Booth 1576
Booth 5526

27. German/Polish firm provides Asian-built horizontal and vertical toggle presses coming from 50 in
order to 3500 tons, also as multicolor along with PET preform systems.
Booth 1180 (Exhibiting with American Jetstream)
New top-entry traversing, gantry as well as beam design robots tend to be achieving at virtually any
time higher speeds. Modules may be swiftly extra or even removed.
NINGBO HAITIAN GROUP CO. also showing much more screws, non-return valves, barrels, and
area support programs.
Supplies gas-injection nozzles, fuel generators, controls, as well as other components with regard to
gas- and also water-assist molding.
Booth 2286
Offers Nadem line regarding hybrid electric machines using hydromechanical clamp, too as MC line
of horizontal fully hydraulic machines.
Offers injection equipment for coinjection, structural foam, insert molding, and also multi-material
applications
Introducing aluminum along with steel laminated prototype along with production tooling using
conformal cooling/heating channels believed to decrease cycle times approximately 50% whilst
improving portion quality. Duo 1650 Combi M US device will mold any two-color automotive sunroof
panel using Glazemelt technology. Demonstrating Twinshot coinjection technology employing a
single barrel. In Addition exhibiting the gate-cutting robot.
See Haitian Machinery.
Booth 5899
Swedish automation integrator will be introducing X-flex modular automation system throughout
partnership with ABB Robotics. also unveiling Flitescan steady put on monitoring regarding screws
whilst throughout operation. A New Powerline NT550 model will create a flowerpot which is
assembled and fixed having an RFID label in an unmanned molding cell.
MGS MANUFACTURING GROUP
IEEC-PBJ INDUSTRIAL ELECTRONICS PVT
Unveiling updated HTD all-electric toggle presses within 100- as well as 400-ton models.
Furthermore introducing novel dual-arm DA series robot with a 44-1b payload capacity, and two 6-
axis articulating arms that may be coordinated for you to come together pertaining to assembly and
also device tending. Hybrids that will utilize electric drive only on the screw consist of the new Boy
55Ae machine.
Booth 9852
See Technoject.

28. Booth 2170
Offering complete turnkey gas-assist setups for single presses or even plant-wide systems. allows
replacement associated with gripper by yourself rather than entire picker unit. It allows one robot to
become able to tend interchangeable modules pertaining to secondary operations. In Addition
showing Melt Flipper melt-rotation device to solve unbalanced completing multicavity molds.
MHS INC./MOLD HOTRUNNER SOLUTIONS INC.
The trend toward using newer articulating-arm robots using 5 or perhaps 6 axes (or more) to
incorporate secondary operations to machine tending is evident within exhibits through ABB,
Hekuma, Kuka, Motoman, as well as Staubli. A New 110-ton Multi will mold the magnifier having a
mechanical hinge using PC along with nylon.
MELT DESIGN INC.
UNI-THERM INSULATION SYSTEMS INC.
SAS AUTOMATION LLC
Booth 1409
GREENWOOD TECHNOLOGY INC.
NEW PACIFIC MACHINERY INC.
POLYSHOT CORP.
Manufactures regular and also custom screws as well as barrels for injection and extrusion
machinery. also plans to unveil a new machine along with hot-runner technologies.
Booth 4529
CINPRES GAS INJECTION INC.
Booth 3051
Chinese firm creates QS horizontal hydraulic presses via one hundred in order to 400 tons.
Showing tough facing to extend service life associated with injection verify valves, valve seats,
nozzles, screws, and also barrel liners.
Booth 1106
Booth 9620 (Exhibiting together with Fanuc Automation)
FAST 4M TOOLING
VICTOR TAICHUNG MACHINERY
FAST HEAT INC.

29. Exhibitor Listings
Booth 4401 (Exhibiting along with SPI Wonderful Plastics Works)
WEXCO CORP.
Italian builder of injection machines, such as new Freedom HES retractable-tiebar machine--a
collaboration with sister company HPM.
EAS MOLD & DIE CHANGE SYSTEM INC.
Booth 1440
http://www.thefreelibrary.com/Injection+molding.-a0147346710
Rolling out electrostatic charging equipment regarding in-mold labeling along with decorating
(IML/IMD) which includes small, lightweight cost applicators along with charging generators.
Furthermore showing refurbished along with rebuilt robots.
Booth 9201
HPM, Any TAYLOR'S COMPANY
Introducing Sigma2 DIN rail-mount PAC controller along with I/O modules built to manage an entire
molding machine. A New 242-ton SE-HS will generate thin-wall health-related containers in a 4-
cavity mold.
No info with press time.
CBW AUTOMATION
New multi-tip systems will debut coming from Gunther along with Mold-Masters regarding little
parts. The second CX unit will generate the test to demonstrate surface graining options. Logic 1
will be showing retrofit controls that can boost the speed along with repeatability of older pneumatic
robots with electric inverter motors with cheaper when compared with servos. New Versafil
independent nozzle manage configures device regarding sequential filling. Furthermore unveiling
rectangular valve gates.
Booth 9537
Builds as well as repairs screws, tips, nozzles, as well as bimetallic barrels.
Booth 541
Introducing Magna V vertical-clamp insert molders in the new vertical-injection configuration (15 to
130 tons).
Booth 4975
Introducing high-speed side-entry robots. also demonstrating thermal imaging regarding parts along
with tooling to design conformal heating/cooling lines pertaining to quicker cycles.

30. Supplies vertical-clamp, vertical-injection rubber presses regarding 120 to end up being able to 1200
metric tons, designed in Germany and integrated Hong Kong.
Introducing Cincinnati Milacron MTg hydraulic toggle press together with new injection unit and
easy-to-service hydraulics. In Addition showing new X-flex modular automation system via Animex
regarding Sweden, an automation integrator.
AVALON VISION SOLUTIONS
Offers Sodick Plustech range involving horizontal, vertical, along with LSR injection molding
presses, which usually range through the V-line two-stage injection system.
PSG PLASTIC SERVICE GMBH Booth 7415 supplies hot-runner systems.
GLYCON CORP.
Booth 2515
Booth 1176
FERROMATIK MILACRON EUROPE
Booth 1135
Booth 9962
Booth 1491
Swiss supplier involving hot-runner manifold systems, nozzles, along with tips. In Addition
introducing Ecomodul series hot-runner system made for less difficult installation. also introducing
Multi Shot Z10325 multi-nozzle concept together with new immediate tip-seal technology. Unveiling
single valve gate pertaining to shots up to 11 lb along with nozzle duration up to 1000 mm.
International Pro, city of Industry, Calif.
Booth 11246
Produces bimetallic cylinders as well as liners along with associated services.
MINATECH INC.
ROCHESTER PLASTIC MACHINERY INC.
Booth 1870
Booth 962
PROGRESS PRECISION INC. Additionally presenting a manufacturer new hot-sprue nozzle built to
easily match into many types of tiny unit-die applications. Additionally offers HTH series high-speed
machine.
UNITEMP S.A.

31. Offers eM number of hybrid-electric machines, MEt as well as ME lines associated with all-electric
presses, too as fully hydraulic as well as hydromechanical units.
Introducing Lumina LP (Large Platen)
Series device for large parts using gas-assist
or even structural foam. LTD.
Chinese firm builds FT hydraulic horizontal
presses through 40 for you to 3800 tons, as
well as machines for large-part, low-pressure
molding; high-speed, high-precision
molding; as well as power
efficiency. Offers improved graphics and
further layouts of four many years old to 64
cavities. available within 55 for you to 330
tons.
Korean maker involving bladder-, vacuum-,
as well as vacuum-transfer rubber injection
machines. AMERICA
Supplies Vessel brand name gate-cutting air nippers and blades, end-of-arm-tooling, chucking parts,
static-charge eliminators, and also hand cutters.
Booth 1118
Booth 823
Booth 577
Demonstrating a new Hylectric 120 hybrid machine with in-mold labeling. Supplying turnkey IML
techniques within the Americas through a fresh partnership along with top Grade Molds.
Offers magnetic quick mold-clamping system as well as hydraulic or perhaps mechanical mold-change
systems.
Booth 5133
MEIKI AMERICA CORP.
UNILOY MILACRON
Supplies permanent electromagnetic quick-change mold-clamping systems.
Makes rubber injection machines throughout single-station and also rotary-table configurations with
vertical along with horizontal clamps.
Booth 5946

32. Booth 991
Automation advances
HAUG NORTH AMERICA
Booth 4798 (Exhibiting using Syn-Genuity)
Booth 4270
Manufactures screws, tips, barrels, and look valves.
WILMINGTON MACHINERY
Also molding small, high-precision parts upon a couple of Allrounder U models. Demonstrating
model EC110NII within thin-wall molding, EC180NII within high-speed molding, a new healthcare
application with an EC20NII, and also LSR overmolding in the cell with a couple of EC54NII units
plus a Toshiba SCARA robot moving parts in between presses.
Offers any control system pertaining to all-electric injection machines depending on its Simotion
motion controller.
Existing all-electric models that will receive a new control as well as mechanical upgrade pertaining
to improved performance along with efficiency range via the HTD series coming from Haitian, the
particular Fanuc Roboshot press offered here by simply Milacron, Nissei's NEX series, and the V-alpha
series from Victor/Fortune.
Arburg, Demag, Engel, Mitsubishi, and Ube will demonstrate proven lines involving all-electrics.
Furthermore very first North American showing involving in-mold labeling of the container along
with lid on the 165-ton El-Exis hybrid. New repeat-ejection command instructs machine to test once
more in order to eject part just before sending an audible alarm. Features new clamping mechanism
in which transmits forces uniformly. OF MILACRON Booths 1702, 1715 (Exhibiting using Milacron)
Booth 4367
Booth 1885
Israeli firm produces robots with regard to in-mold labeling, item takeout, along with
stacking/packing. machine features new Smart-Start intrusion technology additionally a new shot-pot
injection unit for you to protect melt via overheating as well as excessive shear although
delivering shot-to-shot consistency using Sycap closed-loop method control. (See in addition
Decorating & Finishing section.) And Also Ube Machinery will present the many recent outcomes
obtained using its new Imprest in-mold painting technology.
CANADIAN FEED SCREW MFG. Displaying LSR injection nozzles, material pressure regulators,
material filter pack, as well as shutoff valves.
Booth 9940

33. 11423
Booth 9325
Introducing SE-HS Series involving mid-sized, high-speed, all-electric machines from 242 for you to
385 tons