1. ICIM
CERTIFIED
EN 1125
SECURITY LOCKS COUPLED WITH PANIC EXIT DEVICE
SAFEGUARDING YOUR SECURITY
2. WHEN AN ICIM
EMERGENCY CERTIFIED
EN 1125
EXIT
NEEDS A
SECURITY
LOCK
No panic with GORILLA®. Getting out is very simple, but
breaking in is very, very difficult. GORILLA®, certified
according to the European standard EN 1125, is a security lock
coupled with horizontal bar panic exit device. Suitable with
side, three-point or vertical locks, can be installed on single-
leaf armoured doors.
Warning:
The features of this product are very important for the safety of people. The product must be installed using the spare
parts included in the package.The certification is not valid if any spare parts is modified or the mounting sequence
recommended on the package is not followed.
3. 86510 SIDE LOCK
2 locking points
Right and left version.
Fit for installation of double cylinders (opening by key from
both sides) or half cylinders (opening from only one side,
external or internal).
Suitable exclusively for single-leaf ARMOURED doors.
The package includes:
• lock
• panic exit device
• red bar, for doors with maximum width 1300 mm.
Not included:
• cylinder, escutcheons, Defender® protection.
Certified according to UNI EN 1125 / January 1999.
4. 86530 THREE-POINT LOCK
6 locking points
Right and left version.
Fit for installation of double cylinders (opening by key from both sides)
or half cylinders (opening from only one side, external or internal).
Suitable exclusively for single-leaf ARMOURED doors.
May be fit with switchlocks with center distances 28/37/50/53.
The package includes:
• lock
• panic exit device
• red bar, for doors with maximum width 1300 mm
• Two switchlocks with adjustable bars.
Not included:
• cylinder, escutcheons, Defender® protection.
Certified according to UNI EN 1125 / January 1999.
5. 86560 VERTICAL LOCK
12 locking points
Right and left version.
Fit for installation of double cylinders (opening by key from both sides)
or half cylinders (opening from only one side, external or internal).
Suitable exclusively for single-leaf ARMOURED doors.
The package includes:
• lock
• panic exit device
• red bar, for doors with maximum width 1300 mm.
Not included:
• cylinder, escutcheons, Defender® protection.
Certified according to UNI EN 1125 / January 1999.
6. MOTTURA GUARANTEES
By tradition, Mottura products are designed and manufactured according to the highest quality
Mottura Serrature di sicurezza S.p.A. reserves the right to vary technical features of the products shown in this catalogue at any time and without prior notice.
standards to guarantee maximum security.
Confirming this commitment to quality GORILLA®, security locks coupled with horizontal bar panic exit devices
have obtained ICIM product certification according to the European standard UNI EN 1125 / January 1999.
MOTTURA RECOMMENDS
CHAMPIONS® + DEFENDER® + MANGANESE PLATES.
The combination of Champions® security cylinder, Defender®
protection and a manganese steel plate (which doubles the average resistance of the complete lock against drilling)
offers the highest protection to the lock.
SAFEGUARDING YOUR SECURITY
90228/GB-06/02
MOTTURA SERRATURE DI SICUREZZA S.p.A.
Strada Antica di Francia, 34 - 10057 Sant’Ambrogio (TO) - Italy - Tel. 011.934.31.11 - Fax 011.931.24.27
www.mottura.it - e-mail: info@mottura.it