Caterpillar cat 302.4 d mini hydraulic excavator (prefix ljn) service repair manual (ljn00001 and up)

Service Repair Manual
Models
302.4D Mini Hydraulic
Excavator

Shutdown SIS
Previous Screen
Product: MINI HYD EXCAVATOR
Model: 302.4D MINI HYD EXCAVATOR LJN
Configuration: 302.4D Mini Hydraulic Excavator LJN00001-UP (MACHINE)
Disassembly and Assembly
301.7D, 302.2D and 302.4D Mini Hydraulic Excavators Machine Systems
Media Number -UENR3254-01 Publication Date -01/05/2015 Date Updated -12/05/2015
i05221254
Final Drive and Travel Motor - Disassemble
SMCS - 4050-015; 4351-015
Disassembly Procedure
Start By:
A. Remove the final drive.
Illustration 1 g03337634
1. Remove sprocket (1).
1/2
302.4D Mini Hydraulic Excavator LJN00001-UP (MACHINE)(SEBP6413 - 33) - Doc...
2020/3/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...

Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
2. Remove plugs (2) and O-ring seals (6). Remove springs (5). Remove washers (4) and valve
spool (3).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Mar 7 15:43:44 UTC+0800 2020
2/2
2020/3/7

Shutdown SIS
Previous Screen
i05221337
Final Drive and Travel Motor - Assemble
SMCS - 4050-016; 4351-016
Specifications
Table 1
Specification for 399-3043 Travel Motor Gp
Item Qty Part Specification Description
1 - -
Maximum displacement per revolution is
20.7 cc (1.3 cubic inch).
Maximum motor speed is 1250 rpm.
Assembly Procedure
1/3
2020/3/7

Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
1. Install valve spool (3) and washers (4). Install springs (5). Install O-ring seals (6) onto plugs
(2) .
2. Install plugs (2) into the final drive motor.
2/3
2020/3/7

3. Install sprocket (1).
End By: Install the final drive and travel motor.
Sat Mar 7 15:44:41 UTC+0800 2020
3/3
2020/3/7

Shutdown SIS
Previous Screen
i05210988
Swivel - Remove and Install
SMCS - 5060-010
Specifications
Table 1
Specification for 394-5494 Swivel
Item Qty Part Specification Description
1 4 209-8296 Bolt
Before assembly, lubricate the threads.
Torque to
64 N·m (47 lb ft).
1/5
2020/3/7

Removal Procedure
Start By:
A. Remove Cab
NOTICE
Keep all parts clean from contaminants.
Contamination of the hydraulic system with foreign material will
reduce the service life of the hydraulic system components.
To prevent contaminants from entering the hydraulic system, always
plug or cap the lines, fittings, or hoses as they are disconnected. Cover
any disassembled components and clean them properly before
assembly.
Clean the hydraulic system properly after any major component
exchange or especially after a component failure, to remove any
contamination.
1. Drain Hydraulic Oil. Refer to Operation and Maintenance Manual, "Hydraulic System Oil -
Change"for the correct draining and filling procedure.
1. Remove floor plate (1) .
2/5
2020/3/7

2. Remove bolts (2) in order to relocate pedal assembly (3). Remove hose assemblies (4) and
relocate pedal assembly (3) out of the way.
3. Disconnect hose assemblies (5) from the top of swivel (6) .
3/5
2020/3/7

4. Disconnect hose assemblies (7) from the side of swivel (6) .
5. Remove remaining hose assemblies (8) .
1. Remove bolts (9) from the swivel base plate.
4/5
2020/3/7

2. Remove swivel (6) .
Installation Procedure
1. Install swivel (6) in the reverse order of removal.
Sat Mar 7 15:45:37 UTC+0800 2020
5/5
2020/3/7

Shutdown SIS
Previous Screen
i05206404
Swing Motor and Swing Drive - Remove and Install
SMCS - 5058-010-ZW; 5459-010-ZW
Removal Procedure
Start By:
A. Remove cab.
1. Drain hydraulic oil. Refer to Operations and Maintenance Manual, "Hydraulic System Oil -
Change"for the correct draining and filling procedures.
2. Remove floor plate (1) .
1/3
2020/3/7

3. Disconnect hose assemblies (2) .
4. Remove bolts (3) .
2/3
2020/3/7

5. Attach a suitable lifting device to swing motor and swing drive (4). Remove swing motor
and swing drive (4). The weight of swing motor and swing drive (4) is approximately 27 kg
(60 lb).
1. Install swing motor and swing drive (4) in the reverse order of removal.
2. Tighten bolts (3) to a torque of 108 N·m (80 lb ft)
Sat Mar 7 15:46:34 UTC+0800 2020
3/3
2020/3/7

Shutdown SIS
Previous Screen
i05212046
Ball Valve (Adjustable Undercarriage) - Remove and Install
SMCS - 5051-010
Removal Procedure
Start By:
A. Raise seat platform (trim)
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
1. Drain hydraulic oil. Refer to Operation and Maintenance Manual, "Hydraulic System Oil -
Change".
1/2
2020/3/7

2. Disconnect hose assemblies (1) from ball valve assembly (2) .
3. Remove handle (3). Remove bolts (4) and ball valve assembly (2).
1. Install ball valve assembly (2) in the reverse order of removal.
Sat Mar 7 15:47:31 UTC+0800 2020
2/2
2020/3/7

Shutdown SIS
Previous Screen
i05224914
Undercarriage Cylinder (Adjustable Gauge) - Remove and
Install
SMCS - 7562-010-UK
Specifications
Table 1
Specification for 395-1280 Hydraulic Cylinder Gp
Item Qty
Part Specification Description
1 1 -
Before assembly, apply Locktite 638 to the bearing
surfaces.
2 1 -
Tighten the head to
220 to 250 N·m (162 to 184 lb ft).
3 1 -
Tighten the nut to
290 to 340 N·m (214 to 251 lb ft).
1/4
2020/3/7

A 1 395-1254 Cylinder As Bore is
50 mm (2.0 inch).
B 1
395-1290 Piston Rod Diameter is
30 mm (1.2 inch).
C 2 Bushing
Bore after assembly is
36.08 to 36.18 mm (1.420 to 1.424 inch).
- - -
Stroke length is
320.0 ± 1.5 mm (12.60 ± 0.06 inch).
Removal Procedure
Start By:
A. Remove track.
B. Remove undercarriage frame (one side).
Cylinders equipped with lock valves can remain pressurized for very
long periods of time, even with the hoses removed.
Failure to relieve pressure before removing a lock valve or
disassembling a cylinder can result in personal injury or death.
Ensure all pressure is relieved before removing a lock valve or
disassembling a cylinder.
1. Remove bolts (1) from opposite side of undercarriage cylinder (2)
2/4
2020/3/7

Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.

2. Remove lower cover (3).
3. Disconnect hose assemblies (4) through lower cover (3).
4. Remove undercarriage cylinder (2) from the frame assembly.
3/4
2020/3/7

1. Install undercarriage cylinder (2) in the reverse order of removal.
Sat Mar 7 15:48:28 UTC+0800 2020
4/4
2020/3/7

Shutdown SIS
Previous Screen
i05204265
Undercarriage Frame (Adjustable Gauge) - Remove and
Install
SMCS - 7050-010-AE
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 189-0408 Shackle As 2
1. Remove bolts (1) and plate (2) .
1/3
2020/3/7

2. Disconnect hose assemblies (3) .
3. Remove bolts (4) .
2/3
2020/3/7

Caterpillar cat 302.4 d mini hydraulic excavator (prefix ljn) service repair manual (ljn00001 and up)

Recommended

Recommended

More Related Content

Similar to Caterpillar cat 302.4 d mini hydraulic excavator (prefix ljn) service repair manual (ljn00001 and up)

Similar to Caterpillar cat 302.4 d mini hydraulic excavator (prefix ljn) service repair manual (ljn00001 and up) (20)

More from fjskekfseik

More from fjskekfseik (20)

Recently uploaded

Recently uploaded (20)

Caterpillar cat 302.4 d mini hydraulic excavator (prefix ljn) service repair manual (ljn00001 and up)