Caterpillar cat 336 excavator (prefix jhd) service repair manual (jhd00001 and up)

Service Repair Manual
Models
336 Excavator

Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336 EXCAVATOR JHD
Configuration: 336 Excavator JHD00001-UP (MACHINE) POWERED BY C9.3B Engine
Disassembly and Assembly
C9.3B Engines for Caterpillar Built Machines
Media Number -M0095651-00 Publication Date -01/06/2018 Date Updated -20/06/2018
i07026677
Camshaft - Remove
SMCS - 1210-011
Removal Procedure
Reference: Special Instruction, "Visual Service Procedures - Colors and Symbols" M0066576
Table 1
Required Tools
Tool Part Number Part Description Qty
A 8T-2998 Lubricant -
Start By:
a. Remove the rocker arm and shaft.
b. Remove the front cover.
c. Remove the valve lifters.
Set the number one piston to top center on the compression stroke. Refer to Testing and Adjusting,
"Finding Top Center for No. 1 Piston."
1/4336 Excavator JHD00001-UP (MACHINE) POWERED BY C9.3B Engine(M0092680...
2020/9/6https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...

Illustration 1 g06201787

NOTICE
Do not damage the lobes of the bearings when the camshaft is removed
or installed.

Shutdown SIS
Previous Screen
Product: EXCAVATOR
i07030947
Camshaft - Install
SMCS - 1210-012
Installation Procedure
Table 1
Required Tools
A 8T-2998 Lubricant -

End By:
a. Install the rocker arm and shaft.
b. Install the front cover.
c. Install the valve lifters.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun Sep 6 00:46:47 UTC+0800 2020

Shutdown SIS
Previous Screen
Product: EXCAVATOR
i07034503
Camshaft Gear - Remove and Install
SMCS - 1210-010-GE
Removal Procedure
Start By:
a. Remove the camshaft.
Table 1
Required Tools
A 1P-0510 Driver Gp 1

NOTICE
Do not allow the camshaft to fall to the floor when pressing it from the
drive gear. Also make sure that the camshaft lobes do not catch on the
press plates.

Sun Sep 6 00:47:43 UTC+0800 2020

Shutdown SIS
Previous Screen
Product: EXCAVATOR
i07048856
Camshaft Bearings - Remove
SMCS - 1211-011
Removal Procedure
Table 1
Required Tools
A 8S-2241 Camshaft Bearing Too 1
Start By:
a. Remove the camshaft.
b. Remove the flywheel.
c. Remove the cylinder block cover.

Sun Sep 6 00:48:39 UTC+0800 2020

Shutdown SIS
Previous Screen
Product: EXCAVATOR
i07035443
Camshaft Bearings - Install
SMCS - 1211-012
Table 1
Required Tools
A 8S-2241 Camshaft Bearing Tool Group 1

Orient the oil hole in the bearing to location (AA).

End By:
a. Install the camshaft
b. Install the flywheel
c. Install the cylinder block cover

Shutdown SIS
Previous Screen
Product: EXCAVATOR
i07053178
Engine Oil Pan - Remove
SMCS - 1302-011
Removal Procedure
Drain the engine oil. Refer to Operation and Maintenance Manual, "Capacities (Refill)".

Sun Sep 6 00:50:30 UTC+0800 2020

Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.

Shutdown SIS
Previous Screen
Product: EXCAVATOR
i07059081
Engine Oil Pan - Install
SMCS - 1302-012
Reference: Special Instruction, "Visual Service Procedures - Colors and Symbols" , M0066576
Table 1
Required Tools
A - Loctite 587 1

Fill the engine oil. Refer to Operation and Maintenance Manual, "Capacities (Refill)".
Sun Sep 6 00:51:26 UTC+0800 2020

Caterpillar cat 336 excavator (prefix jhd) service repair manual (jhd00001 and up)

Recommended

Recommended

More Related Content

What's hot

What's hot (11)

Similar to Caterpillar cat 336 excavator (prefix jhd) service repair manual (jhd00001 and up)

Similar to Caterpillar cat 336 excavator (prefix jhd) service repair manual (jhd00001 and up) (20)

More from fjsjekdmmeme

More from fjsjekdmmeme (20)

Recently uploaded

Recently uploaded (20)

Caterpillar cat 336 excavator (prefix jhd) service repair manual (jhd00001 and up)