Caterpillar Cat 336 Excavator (Prefix DKS) Service Repair Manual Instant Download.pdf

Service Repair Manual
Models
336 Excavator

Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336 EXCAVATOR DKS
Configuration: 336 Excavator DKS00001-UP (MACHINE) POWERED BY C9.3B Engine
Disassembly and Assembly
C9.3B Engines for Caterpillar Built Machines
Media Number -M0095651-00 Publication Date -01/06/2018 Date Updated -20/06/2018
i07024720
Lifter Group - Remove and Install
SMCS - 1209-010
Removal Procedure
Reference: Special Instruction, "Visual Service Procedures - Colors and Symbols" , M0066576
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-2730 Hook 1
B 8T-2998 Lubricant 1
Start By:
a. Remove the cylinder head.
1/2
336 Excavator DKS00001-UP (MACHINE) POWERED BY C9.3B Engine(M009457...
2020/9/8
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...

Illustration 1 g06200865
Installation Procedure
Install the lifters in the reverse order of removal.
Apply Tooling (B) to the lifters prior to installation.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Sep 8 20:34:22 UTC+0800 2020
2/2
2020/9/8

Shutdown SIS
Previous Screen
Product: EXCAVATOR
i07026677
Camshaft - Remove
SMCS - 1210-011
Removal Procedure
Reference: Special Instruction, "Visual Service Procedures - Colors and Symbols" M0066576
Table 1
Required Tools
A 8T-2998 Lubricant -
Start By:
a. Remove the rocker arm and shaft.
b. Remove the front cover.
c. Remove the valve lifters.
Set the number one piston to top center on the compression stroke. Refer to Testing and Adjusting,
"Finding Top Center for No. 1 Piston."
1/4
2020/9/8

2/4
2020/9/8

NOTICE
Do not damage the lobes of the bearings when the camshaft is removed
or installed.
3/4
2020/9/8

Shutdown SIS
Previous Screen
Product: EXCAVATOR
i07030947
Camshaft - Install
SMCS - 1210-012
Table 1
Required Tools
A 8T-2998 Lubricant -
1/3
2020/9/8

2/3
2020/9/8

End By:
a. Install the rocker arm and shaft.
b. Install the front cover.
c. Install the valve lifters.
Tue Sep 8 20:36:13 UTC+0800 2020
3/3
2020/9/8

Shutdown SIS
Previous Screen
Product: EXCAVATOR
i07034503
Camshaft Gear - Remove and Install
SMCS - 1210-010-GE
Removal Procedure
Start By:
a. Remove the camshaft.
Table 1
Required Tools
A 1P-0510 Driver Gp 1
1/3
2020/9/8

NOTICE
Do not allow the camshaft to fall to the floor when pressing it from the
drive gear. Also make sure that the camshaft lobes do not catch on the
press plates.
2/3
2020/9/8

Tue Sep 8 20:37:09 UTC+0800 2020
3/3
2020/9/8

Shutdown SIS
Previous Screen
Product: EXCAVATOR
i07048856
Camshaft Bearings - Remove
SMCS - 1211-011
Removal Procedure
Table 1
Required Tools
A 8S-2241 Camshaft Bearing Too 1
Start By:
a. Remove the camshaft.
b. Remove the flywheel.
c. Remove the cylinder block cover.
1/6
2020/9/8

2/6
2020/9/8

3/6
2020/9/8

4/6
2020/9/8

5/6
2020/9/8

Tue Sep 8 20:38:05 UTC+0800 2020
6/6
2020/9/8

Shutdown SIS
Previous Screen
Product: EXCAVATOR
i07035443
Camshaft Bearings - Install
SMCS - 1211-012
Table 1
Required Tools
A 8S-2241 Camshaft Bearing Tool Group 1
1/4
2020/9/8

Orient the oil hole in the bearing to location (AA).
2/4
2020/9/8

End By:
a. Install the camshaft
b. Install the flywheel
c. Install the cylinder block cover
3/4
2020/9/8

Shutdown SIS
Previous Screen
Product: EXCAVATOR
i07053178
Engine Oil Pan - Remove
SMCS - 1302-011
Removal Procedure
Drain the engine oil. Refer to Operation and Maintenance Manual, "Capacities (Refill)".
1/3
2020/9/8

2/3
2020/9/8

Tue Sep 8 20:39:56 UTC+0800 2020
3/3
2020/9/8

Shutdown SIS
Previous Screen
Product: EXCAVATOR
i07059081
Engine Oil Pan - Install
SMCS - 1302-012
Reference: Special Instruction, "Visual Service Procedures - Colors and Symbols" , M0066576
Table 1
Required Tools
A - Loctite 587 1
1/3
2020/9/8

2/3
2020/9/8

Fill the engine oil. Refer to Operation and Maintenance Manual, "Capacities (Refill)".
Tue Sep 8 20:40:52 UTC+0800 2020
3/3
2020/9/8

Shutdown SIS
Previous Screen
Product: EXCAVATOR
i07059651
Cylinder Liner - Remove
SMCS - 1216-011
Removal Procedure
Table 1
Required Tools
A
173-5527 Cylinder Puller Pack 1
1U-9897 Bridge 1
1/2
2020/9/8

Tue Sep 8 20:41:48 UTC+0800 2020
2/2
2020/9/8

Suggest:
If the above button click is invalid.
Please download this document
first, and then click the above link
to download the complete manual.
Thank you so much for reading

Shutdown SIS
Previous Screen
Product: EXCAVATOR
i07060194
Cylinder Liner - Install
SMCS - 1216-012
Table 1
Required Tools
A 2P-8260 Cylinder Liner Installer 1
B 5P-3975 Rubber Lubricant 1
C - Clean Engine Oil -
1/3
2020/9/8

Caterpillar Cat 336 Excavator (Prefix DKS) Service Repair Manual Instant Download.pdf

Recommended

Recommended

More Related Content

More from 8foskkdjdkdm3e

More from 8foskkdjdkdm3e (20)

Recently uploaded

Recently uploaded (20)

Caterpillar Cat 336 Excavator (Prefix DKS) Service Repair Manual Instant Download.pdf