The document describes Polaris snowmobile models and specifications from 1985 to 1995. It provides details on model identification by serial number and model number. For each year from 1985 to 1995, the document lists the models produced that year and provides key specifications and features for each, including engine type, displacement, dimensions, suspension, brakes, storage and other details.
This document provides a parts list for a Massey Ferguson MF 690 tractor from 1984. It includes 34 items related to the cylinder block of the A4.248 engine, with part numbers, quantities, descriptions and comments. It also lists 20 items for the crankshaft, pistons and connecting rods and provides additional pages listing parts for other engine systems like the cylinder head, water outlets, and rocker shaft.
This document provides part numbers and descriptions for replacement parts for a Massey Ferguson MF 675 tractor from 1984. It includes lists of parts for the engine accessories, guards, fan, cylinder block, crankshaft and other engine components. Each item lists the part number, quantity, description and any comments about the part.
Massey ferguson mf 565 combines parts catalogue manualfjjsekwsxkdmmem
The document contains parts lists and technical specifications for Massey Ferguson MF 560/565 combines. It lists over 50 individual parts with part numbers, quantities, descriptions, and additional comments. The parts are grouped into sections covering the engine and accessories, cylinder block, crankshaft, cylinder head, and cylinder head cover.
Massey ferguson mf 560 combines parts catalogue manualfjjsekwsxkdmmem
The document contains parts lists and technical specifications for Massey Ferguson MF 560/565 combines. It lists over 50 individual parts with part numbers, quantities, descriptions, and additional technical details. The parts are grouped into sections covering the engine and accessories, cylinder block, crankshaft, cylinder head, and cylinder head cover.
Massey ferguson mf 535 combines ( 1115201) parts catalogue manualfjjsekwsxkdmmem
The document provides a parts list and technical specifications for Massey Ferguson MF 530/535 combines. It includes over 30 pages detailing over 200 individual parts for the engine, cylinder block, crankshaft, cylinder head, cylinder head cover, and other systems. Each part is listed with its part number, quantity used, description, and any relevant comments.
Massey ferguson mf 530 s combine parts catalogue manualfjjsekwsxkdmmem
The document provides a list of parts for a Massey Ferguson MF 530 S combine harvester with part numbers and descriptions. It includes tables of contents for the engine and accessories, cylinder block, crankshaft, and cylinder head sections, listing the individual parts that make up each system along with references to other part numbers. The parts are identified numerically in exploded diagram views of each section.
Massey ferguson mf 530 combines ( 1115201) parts catalogue manualfjjsekwsxkdmmem
The document provides a parts list for Massey Ferguson MF 530/535 combines. It contains over 30 entries listing part numbers, quantities, descriptions, and comments for various engine, cylinder block, crankshaft, cylinder head, and cylinder head cover parts. Refence numbers and page numbers are provided at the bottom of each section for navigation.
Massey ferguson mf 510 combine, (fr) parts catalogue manualfjjsekwsxkdmmem
The document provides a parts list for a Massey Ferguson MF 510 combine harvester. It lists various parts needed for the combine's divider, pickup head, and related components. The parts are organized by item number, part number, quantity, description, and any relevant comments. Key parts listed include tubes, cones, plates, bolts, nuts, washers, bearings, discs, rollers, and reel tines for the divider and pickup head.
This document provides a parts list for a Massey Ferguson MF 690 tractor from 1984. It includes 34 items related to the cylinder block of the A4.248 engine, with part numbers, quantities, descriptions and comments. It also lists 20 items for the crankshaft, pistons and connecting rods and provides additional pages listing parts for other engine systems like the cylinder head, water outlets, and rocker shaft.
This document provides part numbers and descriptions for replacement parts for a Massey Ferguson MF 675 tractor from 1984. It includes lists of parts for the engine accessories, guards, fan, cylinder block, crankshaft and other engine components. Each item lists the part number, quantity, description and any comments about the part.
Massey ferguson mf 565 combines parts catalogue manualfjjsekwsxkdmmem
The document contains parts lists and technical specifications for Massey Ferguson MF 560/565 combines. It lists over 50 individual parts with part numbers, quantities, descriptions, and additional comments. The parts are grouped into sections covering the engine and accessories, cylinder block, crankshaft, cylinder head, and cylinder head cover.
Massey ferguson mf 560 combines parts catalogue manualfjjsekwsxkdmmem
The document contains parts lists and technical specifications for Massey Ferguson MF 560/565 combines. It lists over 50 individual parts with part numbers, quantities, descriptions, and additional technical details. The parts are grouped into sections covering the engine and accessories, cylinder block, crankshaft, cylinder head, and cylinder head cover.
Massey ferguson mf 535 combines ( 1115201) parts catalogue manualfjjsekwsxkdmmem
The document provides a parts list and technical specifications for Massey Ferguson MF 530/535 combines. It includes over 30 pages detailing over 200 individual parts for the engine, cylinder block, crankshaft, cylinder head, cylinder head cover, and other systems. Each part is listed with its part number, quantity used, description, and any relevant comments.
Massey ferguson mf 530 s combine parts catalogue manualfjjsekwsxkdmmem
The document provides a list of parts for a Massey Ferguson MF 530 S combine harvester with part numbers and descriptions. It includes tables of contents for the engine and accessories, cylinder block, crankshaft, and cylinder head sections, listing the individual parts that make up each system along with references to other part numbers. The parts are identified numerically in exploded diagram views of each section.
Massey ferguson mf 530 combines ( 1115201) parts catalogue manualfjjsekwsxkdmmem
The document provides a parts list for Massey Ferguson MF 530/535 combines. It contains over 30 entries listing part numbers, quantities, descriptions, and comments for various engine, cylinder block, crankshaft, cylinder head, and cylinder head cover parts. Refence numbers and page numbers are provided at the bottom of each section for navigation.
Massey ferguson mf 510 combine, (fr) parts catalogue manualfjjsekwsxkdmmem
The document provides a parts list for a Massey Ferguson MF 510 combine harvester. It lists various parts needed for the combine's divider, pickup head, and related components. The parts are organized by item number, part number, quantity, description, and any relevant comments. Key parts listed include tubes, cones, plates, bolts, nuts, washers, bearings, discs, rollers, and reel tines for the divider and pickup head.
Massey ferguson mf 382 n tractor (japan only) parts catalogue manualfjjsekwsxkdmmem
This document provides parts information for a Massey Ferguson 382 N tractor intended for use only in Japan. It includes detailed lists and descriptions of engine parts such as the cylinder block, crankshaft, pistons, connecting rods, cylinder head, and rocker shaft. Each part is accompanied by its part number, quantity used, description, and any relevant comments. The document is intended as a reference for ordering replacement parts for the MF 382 N tractor sold only in the Japanese market.
Massey ferguson mf 285 s tractors (tr) parts catalogue manualfjjsekwsxkdmmem
This document provides part numbers and descriptions for engine installation and components for Massey Ferguson 265S and 285S tractors. It includes lists of parts for the engine, cylinder block, crankshaft, pistons, connecting rods and other engine components. Quantities, part numbers and additional identifying information like serial numbers are provided for each part.
Massey ferguson mf 265 s tractors (tr) parts catalogue manualfjjsekwsxkdmmem
This document provides part numbers and descriptions for engine installation and components for Massey Ferguson 265S and 285S tractors. It includes lists of parts for the engine, cylinder block, crankshaft, pistons, connecting rods and other engine components. Quantities, part numbers and additional identifying information like serial numbers are provided for each part.
Massey ferguson mf 254 tractor, 22210640 parts catalogue manualfjjsekwsxkdmmem
This document contains parts lists and technical specifications for components of a Massey Ferguson MF 254 tractor, including the cylinder block, crankshaft and flywheel, cylinder head and cover, rocker arm, and timing gear. It lists over 70 individual parts, providing part numbers, quantities, descriptions, and other identifying information for maintenance and repair of the engine and related systems.
Massey ferguson mf 245 tractor, (fr) parts catalogue manualfjjsekwsxkdmmem
This document provides a parts list for a Massey Ferguson MF 245 tractor. It contains 47 items describing parts like the engine, cylinder block, crankshaft, cylinder head, and timing gear. Each item lists the part number, quantity, description, and any comments. The parts list contains detailed technical specifications for replacement parts.
Komatsu 12 v140 1 series diesel engine service repair manualfjjsekwsxkdmmem
This document provides an overview of the contents and structure of a shop manual for diesel engines. It contains sections on general information, structure and function, testing and adjusting, disassembly and assembly, maintenance standards, repair and replacement of parts. The manual is intended to help technicians perform repairs safely and effectively by explaining components, repair procedures, and inspection standards. Safety notices are included to prevent injury when working on equipment.
Komatsu 8 v170 1 series engine service repair manualfjjsekwsxkdmmem
This document is the introduction and table of contents for a shop manual for engine repair. It outlines safety precautions that should be followed when working on equipment. Some key points include: always wearing protective equipment like safety glasses and shoes, ensuring any lifted components are properly supported, following proper procedures for draining fluids to avoid spills, and making sure replacement parts meet specifications. The manual is divided into sections covering general information, component operation and function, testing and adjustment procedures, disassembly and assembly steps, and maintenance standards.
Kohler aegis 23 hp liquid cooled vertical crankshaft service repair manualfjjsekwsxkdmmem
This document is a service manual for Kohler AEGIS liquid-cooled vertical crankshaft engines with model numbers LV560, LV625, and LV675. The manual contains 11 sections covering safety, tools, troubleshooting, air/fuel systems, lubrication, cooling, electrical components, disassembly, inspection, reassembly, and specifications. It provides important safety warnings and recommendations for proper oil, coolant, and fuel types.
Kohler aegis 20 hp liquid cooled vertical crankshaft service repair manualfjjsekwsxkdmmem
This document is a service manual for Kohler AEGIS liquid-cooled vertical crankshaft engines with model numbers LV560, LV625, and LV675. The manual contains 11 sections covering safety, tools, troubleshooting, air/fuel systems, lubrication, cooling, electrical components, disassembly, inspection, reassembly, and specifications. Safety precautions are outlined, including warnings about rotating parts, hot parts, accidental starts, carbon monoxide, electrical shock, hot liquids, explosive gases, flammable fuels, and cleaning solvents. The document also provides information on engine identification numbers, oil recommendations, coolant recommendations, and fuel recommendations.
Kohler aegis 17 hp liquid cooled vertical crankshaft service repair manualfjjsekwsxkdmmem
This document is a service manual for Kohler AEGIS liquid-cooled vertical crankshaft engines with model numbers LV560, LV625, and LV675. The manual contains 11 sections covering safety, tools, troubleshooting, various engine systems, disassembly, inspection, and reassembly. It provides important safety information and recommendations for oil, coolant, and fuel used in the engines.
This document is an operator handbook for a JCB 1CX backhoe loader from serial numbers 751600 to 752999 and 806000 onwards. It contains safety notices and warnings about operating the machine safely. The contents section lists topics covered in the handbook such as identifying the machine, operation instructions, maintenance requirements, and lubricant safety information. Safety is the top priority when using the machine.
Hyundai hlf202530(c) 5 forklift truck service repair manualfjjsekwsxkdmmem
This document provides instructions for disassembly and assembly of a steering unit. The key steps are:
1. Disassemble the steering unit by removing the end cover, gearwheel set, cardan shaft, distributor plate, check valve parts, bearing races, cross pin, and seals.
2. Assemble the spool and sleeve with neutral position springs aligned correctly. Install the bearing races, cross pin, O-rings and lip seal using assembly tools.
3. Reassemble the remaining parts like the distributor plate, cardan shaft, gearwheel set and end cover. Proper alignment of parts is important for correct assembly.
Hyundai hdf45 3 forklift truck service repair manualfjjsekwsxkdmmem
This document provides instructions for disassembling and assembling the steering system of an industrial vehicle. It includes detailed steps and diagrams for removing and installing individual components like the steering unit housing, gearwheel set, cardan shaft, check valve, and pressure relief valve. Precise assembly instructions are given for reinstalling parts like O-rings, lip seals, bearings, and springs in their proper positions and orientations. Tightening torques are specified for mounting bolts. Tools required are also listed.
Hyundai hdf35 3 forklift truck service repair manualfjjsekwsxkdmmem
This document provides instructions for disassembling and assembling the steering system of an industrial vehicle. It includes detailed steps and diagrams for removing and installing individual components like the steering unit housing, gearwheel set, cardan shaft, check valve, and pressure relief valve. Precise assembly instructions are given for reinstalling parts like O-rings, lip seals, bearings, and springs in their proper positions and orientations. Tightening torques are specified for mounting bolts. Tools required are also listed.
Husqvarna rider pro flex 21 service repair manualfjjsekwsxkdmmem
The document provides maintenance instructions for ride-on lawn mowers. It lists various maintenance tasks and the recommended intervals at which to perform them, such as checking the engine oil level daily; checking the parking brake, seat safety switch, and other systems weekly; and changing the engine oil every 100 hours. The document also provides details on pre-delivery service procedures and 300-hour maintenance services that should be performed by an authorized service workshop.
Husqvarna rider pro flex 21 mower service repair manualfjjsekwsxkdmmem
This document provides instructions for servicing Rider ProFlex 18 and 21 lawn mowers. It outlines safety procedures, specifications, maintenance schedules, repair instructions, and diagrams of the mowers' design and components. Special tools are required for some repairs, such as removing the engine belt pulley or replacing pendulum shaft bushings. The manual instructs technicians to take safety precautions when working with hazardous fuels, compressed air, springs, hot surfaces, sharp blades, batteries, and hydraulic fluids.
Husqvarna rider pro flex 18 service repair manualfjjsekwsxkdmmem
The document is a workshop manual that provides instructions and specifications for repairing Rider Pro 15, Rider ProFlex 18, and Rider ProFlex 21 ride-on lawn mowers. It includes sections on safety regulations, technical specifications, maintenance procedures, troubleshooting, and repair instructions for various components like the engine, transmission, steering and brakes, mower deck, and electrical system. Diagrams and specifications are provided for dimensions, engines, transmissions, electrical systems, tightening torques, and mower decks.
Caterpillar cat 336 d l excavator (prefix mpl) service repair manual (mpl0000...fjjsekwsxkdmmem
1. The document provides step-by-step instructions for disassembling and assembling the piston pump of a 336D excavator.
2. Disassembly involves removing over 30 individual parts in a specific order, including housings, seals, springs, pistons, bearings and other components.
3. Assembly requires carefully installing the parts in reverse order and adjusting shims and bearings to ensure proper tolerances and operation. Special tools and safety precautions are noted throughout.
Caterpillar cat 336 d l excavator (prefix lmg) service repair manual (lmg0000...fjjsekwsxkdmmem
The document provides instructions for assembling a swivel component. It lists required tools including link brackets and vacuum caps. The procedure involves cleaning parts, positioning the swivel joint on a repair stand, and reassembling parts like the outside housing, rotor, seals, bolts and washers in the correct order. Thorough cleaning of parts is important before assembly to prevent contamination.
Caterpillar cat 336 d l excavator (prefix l5x) service repair manual (l5x0000...fjjsekwsxkdmmem
This document provides instructions for removing and installing the rear gear group on a Caterpillar 336D L excavator engine. It describes using tools to remove the bushing, bearing, adapter, gear assembly, cover and O-rings. Dimensions for installing the replacement bearings are also specified. The procedure involves lowering the temperatures of parts before installation and applying loctite to bolts.
Massey ferguson mf 382 n tractor (japan only) parts catalogue manualfjjsekwsxkdmmem
This document provides parts information for a Massey Ferguson 382 N tractor intended for use only in Japan. It includes detailed lists and descriptions of engine parts such as the cylinder block, crankshaft, pistons, connecting rods, cylinder head, and rocker shaft. Each part is accompanied by its part number, quantity used, description, and any relevant comments. The document is intended as a reference for ordering replacement parts for the MF 382 N tractor sold only in the Japanese market.
Massey ferguson mf 285 s tractors (tr) parts catalogue manualfjjsekwsxkdmmem
This document provides part numbers and descriptions for engine installation and components for Massey Ferguson 265S and 285S tractors. It includes lists of parts for the engine, cylinder block, crankshaft, pistons, connecting rods and other engine components. Quantities, part numbers and additional identifying information like serial numbers are provided for each part.
Massey ferguson mf 265 s tractors (tr) parts catalogue manualfjjsekwsxkdmmem
This document provides part numbers and descriptions for engine installation and components for Massey Ferguson 265S and 285S tractors. It includes lists of parts for the engine, cylinder block, crankshaft, pistons, connecting rods and other engine components. Quantities, part numbers and additional identifying information like serial numbers are provided for each part.
Massey ferguson mf 254 tractor, 22210640 parts catalogue manualfjjsekwsxkdmmem
This document contains parts lists and technical specifications for components of a Massey Ferguson MF 254 tractor, including the cylinder block, crankshaft and flywheel, cylinder head and cover, rocker arm, and timing gear. It lists over 70 individual parts, providing part numbers, quantities, descriptions, and other identifying information for maintenance and repair of the engine and related systems.
Massey ferguson mf 245 tractor, (fr) parts catalogue manualfjjsekwsxkdmmem
This document provides a parts list for a Massey Ferguson MF 245 tractor. It contains 47 items describing parts like the engine, cylinder block, crankshaft, cylinder head, and timing gear. Each item lists the part number, quantity, description, and any comments. The parts list contains detailed technical specifications for replacement parts.
Komatsu 12 v140 1 series diesel engine service repair manualfjjsekwsxkdmmem
This document provides an overview of the contents and structure of a shop manual for diesel engines. It contains sections on general information, structure and function, testing and adjusting, disassembly and assembly, maintenance standards, repair and replacement of parts. The manual is intended to help technicians perform repairs safely and effectively by explaining components, repair procedures, and inspection standards. Safety notices are included to prevent injury when working on equipment.
Komatsu 8 v170 1 series engine service repair manualfjjsekwsxkdmmem
This document is the introduction and table of contents for a shop manual for engine repair. It outlines safety precautions that should be followed when working on equipment. Some key points include: always wearing protective equipment like safety glasses and shoes, ensuring any lifted components are properly supported, following proper procedures for draining fluids to avoid spills, and making sure replacement parts meet specifications. The manual is divided into sections covering general information, component operation and function, testing and adjustment procedures, disassembly and assembly steps, and maintenance standards.
Kohler aegis 23 hp liquid cooled vertical crankshaft service repair manualfjjsekwsxkdmmem
This document is a service manual for Kohler AEGIS liquid-cooled vertical crankshaft engines with model numbers LV560, LV625, and LV675. The manual contains 11 sections covering safety, tools, troubleshooting, air/fuel systems, lubrication, cooling, electrical components, disassembly, inspection, reassembly, and specifications. It provides important safety warnings and recommendations for proper oil, coolant, and fuel types.
Kohler aegis 20 hp liquid cooled vertical crankshaft service repair manualfjjsekwsxkdmmem
This document is a service manual for Kohler AEGIS liquid-cooled vertical crankshaft engines with model numbers LV560, LV625, and LV675. The manual contains 11 sections covering safety, tools, troubleshooting, air/fuel systems, lubrication, cooling, electrical components, disassembly, inspection, reassembly, and specifications. Safety precautions are outlined, including warnings about rotating parts, hot parts, accidental starts, carbon monoxide, electrical shock, hot liquids, explosive gases, flammable fuels, and cleaning solvents. The document also provides information on engine identification numbers, oil recommendations, coolant recommendations, and fuel recommendations.
Kohler aegis 17 hp liquid cooled vertical crankshaft service repair manualfjjsekwsxkdmmem
This document is a service manual for Kohler AEGIS liquid-cooled vertical crankshaft engines with model numbers LV560, LV625, and LV675. The manual contains 11 sections covering safety, tools, troubleshooting, various engine systems, disassembly, inspection, and reassembly. It provides important safety information and recommendations for oil, coolant, and fuel used in the engines.
This document is an operator handbook for a JCB 1CX backhoe loader from serial numbers 751600 to 752999 and 806000 onwards. It contains safety notices and warnings about operating the machine safely. The contents section lists topics covered in the handbook such as identifying the machine, operation instructions, maintenance requirements, and lubricant safety information. Safety is the top priority when using the machine.
Hyundai hlf202530(c) 5 forklift truck service repair manualfjjsekwsxkdmmem
This document provides instructions for disassembly and assembly of a steering unit. The key steps are:
1. Disassemble the steering unit by removing the end cover, gearwheel set, cardan shaft, distributor plate, check valve parts, bearing races, cross pin, and seals.
2. Assemble the spool and sleeve with neutral position springs aligned correctly. Install the bearing races, cross pin, O-rings and lip seal using assembly tools.
3. Reassemble the remaining parts like the distributor plate, cardan shaft, gearwheel set and end cover. Proper alignment of parts is important for correct assembly.
Hyundai hdf45 3 forklift truck service repair manualfjjsekwsxkdmmem
This document provides instructions for disassembling and assembling the steering system of an industrial vehicle. It includes detailed steps and diagrams for removing and installing individual components like the steering unit housing, gearwheel set, cardan shaft, check valve, and pressure relief valve. Precise assembly instructions are given for reinstalling parts like O-rings, lip seals, bearings, and springs in their proper positions and orientations. Tightening torques are specified for mounting bolts. Tools required are also listed.
Hyundai hdf35 3 forklift truck service repair manualfjjsekwsxkdmmem
This document provides instructions for disassembling and assembling the steering system of an industrial vehicle. It includes detailed steps and diagrams for removing and installing individual components like the steering unit housing, gearwheel set, cardan shaft, check valve, and pressure relief valve. Precise assembly instructions are given for reinstalling parts like O-rings, lip seals, bearings, and springs in their proper positions and orientations. Tightening torques are specified for mounting bolts. Tools required are also listed.
Husqvarna rider pro flex 21 service repair manualfjjsekwsxkdmmem
The document provides maintenance instructions for ride-on lawn mowers. It lists various maintenance tasks and the recommended intervals at which to perform them, such as checking the engine oil level daily; checking the parking brake, seat safety switch, and other systems weekly; and changing the engine oil every 100 hours. The document also provides details on pre-delivery service procedures and 300-hour maintenance services that should be performed by an authorized service workshop.
Husqvarna rider pro flex 21 mower service repair manualfjjsekwsxkdmmem
This document provides instructions for servicing Rider ProFlex 18 and 21 lawn mowers. It outlines safety procedures, specifications, maintenance schedules, repair instructions, and diagrams of the mowers' design and components. Special tools are required for some repairs, such as removing the engine belt pulley or replacing pendulum shaft bushings. The manual instructs technicians to take safety precautions when working with hazardous fuels, compressed air, springs, hot surfaces, sharp blades, batteries, and hydraulic fluids.
Husqvarna rider pro flex 18 service repair manualfjjsekwsxkdmmem
The document is a workshop manual that provides instructions and specifications for repairing Rider Pro 15, Rider ProFlex 18, and Rider ProFlex 21 ride-on lawn mowers. It includes sections on safety regulations, technical specifications, maintenance procedures, troubleshooting, and repair instructions for various components like the engine, transmission, steering and brakes, mower deck, and electrical system. Diagrams and specifications are provided for dimensions, engines, transmissions, electrical systems, tightening torques, and mower decks.
Caterpillar cat 336 d l excavator (prefix mpl) service repair manual (mpl0000...fjjsekwsxkdmmem
1. The document provides step-by-step instructions for disassembling and assembling the piston pump of a 336D excavator.
2. Disassembly involves removing over 30 individual parts in a specific order, including housings, seals, springs, pistons, bearings and other components.
3. Assembly requires carefully installing the parts in reverse order and adjusting shims and bearings to ensure proper tolerances and operation. Special tools and safety precautions are noted throughout.
Caterpillar cat 336 d l excavator (prefix lmg) service repair manual (lmg0000...fjjsekwsxkdmmem
The document provides instructions for assembling a swivel component. It lists required tools including link brackets and vacuum caps. The procedure involves cleaning parts, positioning the swivel joint on a repair stand, and reassembling parts like the outside housing, rotor, seals, bolts and washers in the correct order. Thorough cleaning of parts is important before assembly to prevent contamination.
Caterpillar cat 336 d l excavator (prefix l5x) service repair manual (l5x0000...fjjsekwsxkdmmem
This document provides instructions for removing and installing the rear gear group on a Caterpillar 336D L excavator engine. It describes using tools to remove the bushing, bearing, adapter, gear assembly, cover and O-rings. Dimensions for installing the replacement bearings are also specified. The procedure involves lowering the temperatures of parts before installation and applying loctite to bolts.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
2. MODELS AND SPECIFICATIONS
1985 Model Identification
SERIAL NUMBER IDENTIFICATION
The machine serial number may be used as an aid in identifying machine model year. Refer to the first digits inthe serial number
for proper identification:
FIRST DIGITS MODEL YEAR
12 1985
1985 MODEL DESIGNATION
YEAR DESIGNATION--------;=:;=::l;I:--:;-, ENGINE DESIGNATION
I 0 8 510 9 17
MODEL DESIGNATION __________-----'
1985
MODEL DESIGNATION
NUMBERS (Chassis) .
07 - Indy Trail, 400, 600
08 - Indy 600 SE
09 - Star
13- SS
14 - LongTrack
1985
ENGINE DESIGNATION
NUMBERS
27 - EC25PS-Single FC
43 - EC44-2PM-2100-Twin FC
49 - EC44-2PM-Twin FC
57 - EC60PL-02-Three LC
59 - EC40PL-02-Twin LC
MODEL. NUMBER MACHINE DESCRIPTION MODEL NUMBER MACHINE DESCRIPTION
0850927
0851349
0850743
0850759
Star 244cc Single FC
SS 432cc Twin FC
Indy Trail 432cc Twin FC
Indy 400. 398cc Twin LC
0850757
0850847
0851449
Indy 600 596cc Three LC
Indy 600 SE 597cc Three LC
LongTrack 432cc Twin FC
MODEL NO. MADE IN U.S.A. POLRRIS
PATENT NOTICE
SERIAL NO.
THIS VEHICLE CONFORMS TO ALL APPLICABLE U.S.
FEDERAL AND S ,ATE REr'l1I1REMENTS AND
CANADIAN FEDERAL MC- - o-ilCLE STANDARDS
IN EFFECT ON THE DATE C, J FACTURE.
MFD. DATE:
MId. by Polaris Industries L.P.
in Roseau, MN under one or more of the following patents:
U.S, Patents 3,605,511 3,533,662 3,613,811
3,580,647 3,613,810 3,605,510
3,483,766 3,545,821 3,525,412
Patented Canada 662,491n1 883,694n1
Canadian Rd, 34,573n1 34,572171
3,867,991
4,793,950
5,038,881
864,394n1
1,227,823/87
7072133
These numbers should be referred to in any correspondence regarding warranty, service or replacement parts.
The machine model and serial number identification decal is located on the right front side of the tunnel. The serial number is
permanently stamped into the tunnel. The model number is embossed on the decal.
Whenever corresponding about an engine it is important that the engine model and serial numbers be called out. Laser
engraved model and serial numbers are located on the crankcase (intake side).
1.1 8/94
"
3. MODELS AND SPECIFICATIONS
1985 Model Identification
600SE
0850857
Engine Type LC Triple
Displacement (cc) 597
Bore x Stroke (mm) 65 x 60
CarburetionlThrottle Body 3 Mikuni
VM38SS Slide
Oil Injected Standard
Ignition COl
Alternator Output 12V 120W
Length (in./cm.) 106.25/269.7
Width (in./cm.) 41 .62/105.6
Height (in./cm.) 31.5/79.9
Ski Stance (in./cm.) 36.5/92.7
Track Width (in./cm.) 15/38.1
Track Length Overall (in./cm.) 121/307.1
Fuel Capacity (U.S. gal./lmp. gal./liters) 7/5.8/26.5
Recommended Fuel 88 Octane Min.
Front Suspension Coil Spring IFS
Chrome Trailing Arms
Brake Type Liquid Cooled
Hydraulic Disc
Storage Rear of Seat
Speedometer Standard
Tachometer Standard
Trip Odometer Standard
Accessory Lights Temp
Electric Start N/A
Handwarmers Option
Two-Up Seat N/A
Backrest N/A
Storage Rack Option
Tow Hitch Option
8/94 1.2
600
0850757
LC Triple
597
65 x 60
3 Mikuni
VM38SS Slide
Standard
COl
12V 120W
106.25/269.7
41.62/105.6
31.5/79.9
36.5/92.7
15/38.1
121/307.1
7/5.8/26.5
88 Octane Min.
Coil Spring IFS
Liquid Cooled
Hydraulic Disc
Rear of Seat
Standard
Standard
Standard
Temp
·N/A
Option
N/A
N/A
Option
Option
400 Long Track
0850759 0851449
LC Twin Fan Cooled Twin
398 432
65 x 60 67.62 x 60
2 Mikuni 1 Mikuni
VM34SS Slide VM30SS Slide
Standard Standard
COl COl
12V 120W 12V 120W
106.25/269.7 120.25/305.2
41 .62/105.6 40/101.5
31.5/79.9 33/83.7
36.5/92.7 31/78.7
15/38.1 15/38.1
121/307.1 148/375.6
7/5.8/26.5 5.4/4.5/20
88 Octane Min. 88 Octane Min.
Coil Spring IFS Mono Leaf
Liquid Cooled Mechanical Disc
Hydraulic Disc
Rear of Seat Rear of Seat
Storage Rack
Standard Standard
Standard Option o
Standard Standard
Temp N/A
N/A N/A
Option Option
N/A N/A
N/A N/A
Option Standard
Option Standard
4. r
Engine Type
Displacement (cc)
Bore x Stroke (mm)
Carl;>uretionfThrottle Body
Oil Injected
Ignition
Alternator Output
Length (in.!cm.)
Width (in.!cm.)
Height (in.!cm.)
Ski Stance (in.!cm.)
Track Width (in.!cm.)
Track Length Overall (in.!cm.)
Fuel Capacity (U.S. gal.llmp. gal./liters)
Recommended Fuel
Front Suspension
Brake Type
Storage
Speedometer
Tachometer
G Trip Odometer
Accessory Lights
Electric Start
Handwarmers
Two-Up Seat
Backrest
Storage Rack
Tow Hitch
1.3
MODELS AND SPECIFICATIONS
1985 Model Identification
. ~.
Indy Trail SS Star
0850743 0851349 0850927
Fan Cooled Twin Fan Cooled Twin Fan Cooled Single
432 432 244
67.62 x 60 67.72 x 60 72 x 60
1 Mikuni 1 Mikuni 1 Mikuni
VM34SS Slide VM34SS Slide VM30SS Slide
Standard Standard Standard
COl COl COl
12V 120W 12V 120W 12V 100W
106.25/269.7 102/258.9 102/258.9
41 .62/105.6 40/101.5 40/101 .5
31.5/83.7 33/83.7 33/83.7
36.5/92.7 31/78.7 31/78.7
15/38.1 15/38.1 15/38.1
121/307.1 120/304.6 108/274.1
7/5.8/26.5 6.8/5.7/25.7 5.414.5120
88 Octane Min. 88 Octane Min. 88 Octane Min.
Coil Spring IFS Mono Leaf Mono Leaf
Hydraulic Disc Mechanical Disc Mechanical Disc
Rear of Seat Rear of Seat Rear of Seat
Standard Standard Option
Standard Standard Option
Standard Standard Option
N/A N/A N/A
Option Option N/A
Standard Option N/A
N/A N/A N/A
N/A N/A N/A
Option N/A N/A
Option Option Option
8/94
5. MODELS AND SPECIFICATIONS
·1986 Model Identification
SERIAL NUMBER IDENTIFICATION
The machine serial number may be used as an aid in identifying machine model year. Referto the first digits in the serial number
for proper identification:
FIRST DIGITS
12
13
MODEL YEAR
1985
1986
1986 MODEL DESIGNATION
YEAR DESIGNATIONI--- - - ----;=::;::=lI:---=1 ENGINE DESIGNATION
I 0 8 610 9 17
MODEL DESIGNATION _ _ _ _ _ _ _ _ _ _ ---'1
1986
MODEL DESIGNATION
NUMBERS (Chassis)
07 - Indy Trail, 400, 600
08 - Indy 600 LE
09 - Star/Sprint 340 (ES)
13 - SS
14 - LongTrack
MODEL NO.
SERIAL NO.
1986
ENGINE DESIGNATION
NUMBERS
27 - EC25PS-Single FC
31 - EC34-2PM-01 -Twin FC (ES)
33 - EC34-2PM-02-Twin FC
49 - EC44-2PM-5100-Twin FC
57 - EC60PL-02-Triple LC
1986
ENGINE DESIGNATION
NUMBERS
59 - EC40PL-02-Twin LC
61 - EC50PM-01-Twin FC
MADE IN U.S.A. PDLRRIS
PATENT NOTICE
Mfd. by Polaris Industries L.P.
THIS VEHICLE CONFORMS TO ALL APPLICABLE U.S.
FEDERAL AND STATE REQUIREMENTS AND
CANADIAN FEDERAL MOTOR VEHICLE STANDARDS
IN EFFECT ON THE DATE OF MANUFACTURE.
in Roseau. MN under one or more of the following patents:
U.S. Patents 3.605.511 3.533.662 3,613,811
3,580.647 3,613,810 3,605,510
3,483,766 3,545,821 3,525,412
Patented Canada 882,491171 883,694171
Canadian Rd. 34,573171 34,572171
MFD. DATE:
These numbers should be referred to in any correspondence regarding warranty, service or replacement parts.
3,867,991
4,793,950
5,038,881
864,394171
1,227,823187
7072133
The machine model and serial number identification decal is located on the right front side of the tunnel. The serial number is
permanently stamped into the tunnel. The model number is embossed on the decal.
Whenever corresponding about an engine it is important that the engine model and serial numbers be called out. Laser
engraved model and serial numbers are located on the crankcase (intake side).
8/94 1.4
,,
o
6. 600 LE
0860857
Engine Type LC Triple
Displacement (cc) 597
Bore x Stroke (mm) 65 x 60
CarburetionfThrottle Body 3 Mikuni
VM38SS Slide
Oil Injected Standard
Ignition COl
Alternator Output 12V 120W
Length (in./cm.) 106.25/269.7
Width (in./cm.) 41.62/105.6
Height (in./cm.) 31.5/79.9
Ski Stance (in./cm.) 36.5/92.7
Track Width (in./cm.) 15/38.1
Track Length Overall (in./cm.) 121/307.1
Fuel Capacity (U.S. gaL/Imp. gaL/liters) 7/5.8/26.5
Recommended Fuel 88 Octane Min.
Front Suspension Coil Spring IFS
Chrome Trailing Arm
Brake Type Liquid Cooled
Hydraulic Disc
Storage Rear of Seat
Speedometer Standard
Tachometer Standard
Trip Odometer Standard
- -
Accessory Lights Temp
Electric Start N/A
Handwarmers Option
Two-Up Seat N/A
Backrest N/A
Storage Rack Option
Tow Hitch Option
1.5
MODELS AND SPECIFICATIONS
1986 Model Identification
600 400 Long Track
0860757 0860759 0861449
LC Triple LC Twin Fan Cooled Twin
597 398 432
65 x 60 65 x 60 66.72 x 60
3 Mikuni 2 Mikuni 1 Mikuni
VM38SS Slide VM34SS Slide VM30SS Slide
Standard Standard Standard
COl COl COl
12V 120W 12V 120W 12V 120W
106.25/269.7 106.25/269.7 120.25/305.2
41 .62/105.6 41 .62/105.6 40/101.5
31.5/79.9 31 .5/79.9 33/83.7
36.5/92.7 36.5/92.7 31/78.7
15/38.1 15/38.1 15/38.1
121/307.1 121/307.1 148/375.6
7/5.8/26.5 7/5.8/26.5 7.5/6.2/28
88 Octane Min. 88 Octane Min. 88 Octane Min.
Coil Spring IFS Coil Spring IFS Mono Leaf
Liquid Cooled Liquid Cooled Mechanical Disc
Hydraulic Disc Hydraulic Disc
Rear of Seat Rear of Seat Rear of Seat
Storage Rack
Standard Standard Standard
Standard Standard Option
Standard Standard Standard
Temp Temp N/A
N/A N/A N/A
Option Option Option
N/A N/A N/A
N/A N/A N/A
Option Option Standard
Option Option Standard
8/94
7. MODELS AND SPECIFICATIONS
1986 Model Identification
Indy Trail SS
0860761 0861349
Engine Type Fan Cooled Twin Fan Cooled Twin
Displacement (cc) 488 432
Bore x Stroke (mm) 72 x 60 67.72 x 60
CarburetionfThrottle 2 Mikuni 1 Mikuni
Body VM34SS Slide VM34SS Slide
Oil Injected Standard Standard
Ignition COl COl
Alternator Output 12V 120W 12V 120W
Length (in./cm.) 106.25/269.7 102/258.9
Width (in./cm.) 41.62/105.6 40/101.5
Height (in./cm.) 31 .5/79.9 33/83.7
Ski Stance (in./cm.) 36.5/92.7 31/78.7
Track Width (in./cm.) 15/38.1 15/38.1
Track Length Overall 121/307.1 120/304.6
(in./cm.)
Fuel Capacity (U.S. 7/5.8/26.5 7.5/6.2/28
gal./lmp. gal./liters)
Recommended Fuel 88 Octane Min. 88 Octane Min.
Front Suspension Coil Spring IFS Mono Leaf
Brake Type Hydraulic Disc Mechanical Disc
Storage Rear of Seat Rear of Seat
Speedometer Standard Standard
Tachometer Standard Standard
Trip Odometer Standard Standard
Accessory Lights N/A N/A
Electric Start Option Option
Handwarmers Standard Option
Two-Up Seat N/A N/A
Backrest N/A N/A
Storage Rack Option N/A
Tow Hitch Option Option
8/94 1.6
o
Sprint Sprint ES Star
0860933 0860931 0860927
Fan Cooled Twin Fan Cooled Twin Fan Cooled Single
339 339 244
62 x 55.6 62 x 55.6 72 x 60
2 Mikuni 2 Mikuni 1 Mikuni
VM30SS Slide VM30SS Slide VM30SS Slide
Standard Standard Standard
COl COl COl
12V 120W 12V 120W 12V 100W
102/258.9 102/258.9 102/258.9
40/101.5 40/101.5 40/101.5
33/83.7 33/83.7 33/83.7
31/78.7 31/78.7 31/78.7
15/38.1 15/38.1 15/38.1
108/274.1 108/274.1 108/274.1
5.414.5120 5.4/4.5/20 5.4/4.5/20
88 Octane Min. 88 Octane Min. 88 Octane Min.
Mono Leaf Mono Leaf Mono Leaf
Mechanical Disc Mechanical Disc Mechanical Disc
Rear of Seat Rear of Seat Rear of Seat
Option Standard Option
Option Standard Option
Option Standard Option
N/A N/A N/A
N/A Standard N/A
Option Option N/A
N/A N/A N/A
N/A N/A N/A
N/A N/A N/A
Option Option Option
8. MODELS AND SPECIFICATIONS
1987 Model Identification
SERIAL NUMBER IDENTIFICATION
The machine serial number may be used as an aid in identifying machine model year. Referto the first digits in the serial number
for proper identification:
FIRST DIGITS
12
13
14
MODEL YEAR
1985
1986
1987
1987 MODEL DESIGNATION
YEAR DESIGNATIONI---------,:=:;:::J,
I:--::l ENGINE DESIGNATION
I 0 8 710 9 17
MODEL DESIGNATION __________----'
1987
MODEL DESIGNATION
NUMBERS (Chassis)
09 - Star/Sprint 340 (ES)
10- StarTrak
1987
ENGINE DESIGNATION
NUMBERS
27 - EC25PS-Single FC
1987
ENGINE DESIGNATION
NUMBERS
59 - EC40PL-02-Twin LC
61 - EC50PM-01-Twin FC
14 - LongTrack
31 - EC34-2PM-02-Twin FC ES
33 - EC34-2PM-01 -03-Twin FC
49 - EC44-2PM-5100-Twin FC
57 - EC60PL-02-Triple LC
62 - EC50PM-02-Twin FC ES
15 - Long Track RLR
04 - Indy Sport
05 -Indy 133 SKS
07 - Indy Trail, 400, 600
MODEL NO. MADE IN U.S.A. PDLRRIS
PATENT NOTICE
SERIAL NO.
THIS VEHICLE CONFORMS TO ALL APPLICABLE u.s.
FEDERAL AND STATE REQUIREMENTS AND
CANADIAN FEDERAL MOTOR VEHICLE STANDARDS
IN EFFECT ON THE DATE OF MANUFACTURE.
MFD. DATE:
Mfd. by Polaris Industries loP.
in Roseau. MN under one or more of the following patents:
U.S. Patents 3.605.511 3.533.662 3.613.811
3.580.647 3.613.810 3.605.510
3.483.766 3.545.821 3.525.412
Patented Canada 882,491171 883.694f71
Canadian Rd. 34.573f71 34.572f71
These numbers should be referred to in any correspondence regarding warranty, service or replacement parts.
3.867.991
4.793.950
5.038.881
864.394171
1.227.823/87
7072133
The machine model and serial number identification decal is located on the right front side of the tunnel. The serial number is
permanently stamped into the tunnel. The model number is embossed on the decal.
Whenever corresponding about an engine it is important that the engine model and serial numbers be called out. Laser
engraved model and serial numbers are located on the crankcase (intake side).
1.7 8/94
9. MODELS AND SPECIFICATIONS
1987 Model Identification
Engine Type
Displacement (cc)
Bore x Stroke (mm)
CarburetionlThrottle Body
Oil Injected
Ignition
Alternator Output
Length (in.lcm.)
Width (in.lcm.)
Height (in.lcm.)
Ski Stance (in.lcm.)
Track Width (in./cm.)
Track Length Overall (in./cm.)
Fuel Capacity (U.S. gal./lmp. gal./liters)
Recommended Fuel
Front Suspension
Brake Type
Storage
Speedometer
Tachometer
Trip Odometer
Accessory Lights
Electric Start
Handwarmers
Two-Up Seat
Backrest
Storage Rack
Tow Hitch
8/94
Indy 600
0870757
LC Triple
597
65 x 60
3 Mikuni
VM38SS Slide
Standard
COl
12V 120W
109/276.6
41 .62/105.6
33/83.7
36.5/92.7
15/38.1
121/307.1
7/5.8/26.5
88 Octane Min.
Coil Spring IFS
Liquid Cooled
Hydraulic Disc
Rear of Seat
Standard
Standard
Standard
Temp
N/A
Option
N/A
N/A
Option
Option
1.8
Indy 400
400SKS
0870759
0870559
LCTwin
398
65 x 60
2 Mikuni
VM34SS Slide
Standard
COl
12V 120W
109/276.6
113/286.8 SKS
41.62/105.6
33/83.7
36.5/92.7
15/38.1
121/307.1
133.5/338.8
7/5.8/26.5
88 Octane Min.
Coil Spring IFS
Liquid Cooled
Hydraulic Disc
Rear of Seat
Standard
Standard
Standard
Temp
N/A
Option
N/A
N/A
Option
Option
Indy Trail Long Track
Trail ES I SKS LTR
0870761 0871449
0870762/0870561 0871549
Fan Cooled Twin Fan Cooled Twin
488 432
72 x 60 67.72 x 60
2 Mikuni 1 Mikuni
VM34SS Slide VM30SS Slide
Standard Standard
COl COl
12V 120W 12V 120W
109/276.6 120.25/305.2
.,
113/286.8 SKS
41 .62/105.6 40/101.5
33/83.7 33/83.7 .
36.5/92.7 31/78.7
15/38.1 15/38.1
121/307.1 148/375.6
133.5/338.8
7/5.8/26.5 7.5/6.2/28
88 Octane Min. 88 Octane Min.
Coil Spring IFS Mono Leaf
Hydraulic Disc Mechanical Disc
Rear of Seat Rear of Seat
Standard Standard
Standard Option
Standard Standard
N/A N/A
Option N/A
Standard ES
Standard Option
N/A N/A
N/A N/A
Option Standard
Option Standard
10. Indy Sport
0870433
Engine Type Fan Cooled Twin
Displacement (cc) 339
Bore x Stroke (mm) 62 x 55.6
CarburetionlThrottle Body 2 Mikuni
VM30SS Slide
Oil Injected Standard
Ignition COl
Alternator Output 12V 120W
Length (in./cm.) 109/276.6
Wid1h (in./cm.) 41.62/105.6
Height (in./cm.) 33/83.7
Ski Stance (in./cm.) 36.5/92.7
Track Width (in./cm.) 15/38.1
Track Length Overall (in./cm.) 121/307.1
Fuel Capacity (U.S. gaL/Imp. gal./liters) 7/5.8/26.5
Recommended Fuel 88 Octane Min.
Front Suspension Coil Spring IFS
Brake Type Liquid Cooled
Hydraulic Disc
c
Storage Rear of Seat
Speedometer Standard
Tachometer Option
Trip Odometer Standard
Accessory Lights N/A
Electric Start Option
Handwarmers Option
Two-Up Seat N/A
Backrest N/A
Storage Rack Option
Tow Hitch Option
1.9
MODELS AND SPECIFICATIONS
1987 Model Identification
Sprint Star Star Trak
Sprint ES
08"10933 0870927 0871027
0870931
Fan Cooled Twin Fan Cooled Single Fan Cooled Single
339 244 244
62 x 55.6 72 x 60 72 x 60
2 Mikuni 1 Mikuni 1 Mikuni
VM30SS Slide VM30SS Slide VM30SS Slide
Standard Standard Standard
COl COl COl
12V 120W 12V 100W 12V 100W
1021258.9 102/258.9 109/276.9
40/101.5 40/101.5 40/101.5
33/83.7 33/83.7 34/86.3
31/78.7 31/78.7 31/78.7
15/38.1 15/38.1 15/38.1
108/274.1 108/274.1 133.5/338.9
5.4/4.5/20 5.4/4.5/20 7.5/6.2128
88 Octane Min. 88 Octane Min. 88 Octane Min.
Mono Leaf Mono Leaf Mono Leaf
Mechanical Disc Mechanical Disc Mechanical Disc
Rear of Seat Rear of Seat Rear of Seat
Option Sprint Option Standard
Standard ES
Option Sprint Option Standard
Standard ES
Option Sprint Option Standard
Standard ES
N/A N/A N/A
Sprint ES Only N/A N/A
Option N/A N/A
N/A N/A N/A
N/A N/A N/A
N/A N/A Standard
Option Option Option
8/94
,
11. MODELS AND SPECIFICATIONS
1988 Model Identification
SERIAL NUMBER IDENTIFICATION
The machine serial number may be used as an aid in identifying machine model year. Referto the first digits in the serial number
for proper identification:
FIRST DIGITS
12
13
14
15
MODEL YEAR
1985
1986
1987
1988
1988 MODEL DESIGNATION
YEAR DESIGNATIONI- - - - -- - -;:::==ll~ ENGINE DESIGNATION
I 0 88
10 9 17
MODEL DESIGNATION _________ ---.JI
1988
MODEL DESIGNATION
NUMBERS (Chassis)
09 - Star/Sprint (ES)
10 - StarTrak
15 - Long Track RLR
04 - Indy Sport
05 - Indy 133 SKS
06 - Indy Trail SP
07 - Indy Trail, 400, 650
MODEL NO.
SERIAL NO.
1988
ENGINE DESIGNATION
NUMBERS
27 - EC25PS-Single FC
31 - EC34-2PM-02-Twin FC ES
33 - EC34-2PM-01-03-Twin FC
49 - EC44-2PM-4100-Twin FC
58 - EC65PL-01-Triple LC
1988
ENGINE DESIGNATION
NUMBERS
59 - EC40PL-02-Twin LC
61 - EC50PM-01-Twin FC
62 - EC50PM-02-Twin FC ES
MADE IN U.S.A. PDLRRIS
PATENT NOTICE
Mfd. by Polaris Industries L.P.
THIS VEHICLE CONFORMS TO ALL APPLICABLE U.S.
FEDERAL AND STATE REQUIREMENTS AND
CANADIAN FEDERAL MOTOR VEHICLE STANDARDS
IN EFFECT ON THE DATE OF MANUFACTURE.
in Roseau, MN under one or more of the following patents:
U.S. Patents 3,605.511 3,533.662 3.613,811
3,580,647 3,613,810 3.605.510
3,483.766 3.545.821 3.525,412
Patented Canada 882.491 171 883,694171
Canadian Rd. 34,573171 34,572171
MFD. DATE:
These numbers should be referred to in any correspondence regarding warranty, service or replacement parts.
3,867,991
4,793,950
5,038,881
864,39417t
1,227,823187
7072133
The machine model and serial number identification decal is located on the right front side of the tunnel. The serial number is
permanently stamped into the tunnel. The model number is embossed on the decal.
Whenever corresponding about an engine it is important that the engine model and serial numbers be called out. Laser
engraved model and serial numbers are located on the crankcase (intake side).
8/94 1.10
o
12. Indy 650
Indy 650 SKS
0880758
0880558
Engine Type LC Triple
Displacement (cc) 648
Bore x Stroke (mm) 67.72 x 60
CarburetionlThrottle Body 3 Mikuni
VM38SS Slide
Oil Injected Standard
Ignition COl
Alternator Output 12V 120W
Length (in./cm.) 106.25/269.9
113/287 SKS
Width (in./cm.) 41 .62/105.7
Height (in./cm.) 42/106.7
Ski Stance (in./cm.) 36.5/92.7
Track Width (in./cm.) 15/38 .1
Track Length Overall (in./cm.) 120.96/307.2
133.56/339.2 SKS
Fuel Capacity (U.S. gal./lmp. gal./liters) 7.3/6.1/27.7
Recommended Fuel 88 Octane Min.
o
Front Suspension Coil Spring IFS
Brake Type Liquid Cooled
Hydraulic Disc
Storage Rear of Seat
Speedometer Standard
Tachometer Standard
Trip Odometer Standard
Accessory Lights HighTemp Ind.
Electric Start N/A
Handwarmers Option
Two-Up Seat Option
Backrest Option
Storage Rack Option
Tow Hitch Option
1.11
MODELS AND SPECIFICATIONS
1988 Model Identification
Indy 400 Indy 400 Indy Trail, SP
400SKS Classic Deluxe, ES,
SKS
0880759 0880859 0880761/08806611
0880559 0880262/08807621
0880561
LCTwin LC Twin Fan Cooled Twin
398 398 488
65 x 60 65 x 60 72 x 60
2 Mikuni 2 Mikuni 2 Mikuni
VM34SS Slide VM34SS Slide VM34SS Slide
Standard Standard Standard
COl COl COl
12V 120W 12V 120W 12V 120W
106.25/269.9 106.25/269.9 106.25/269.9
113/287 SKS 113/287 SKS
41 .62/105.7 41 .62/105.7 41.62/105.7
43.12/109.5 SP
42/106.7 42/106.7 42/106.7
36.5/92.7 36.5/92.7 36.5/92.7
38/96.5 SP
15/38.1 15/38.1 15/38.1
120.96/307.2 120.96/307.2 121/307.1
133.56/339.2 SKS 133.56/339.2 SKS
7.3/6.1 /27 .7 7.3/6.1/27.7 7.3/6.1/27.7
88 Octane Min. 88 Octane Min. 88 Octane Min.
Coil Spring IFS Coil Spring IFS Coil Spring IFS
Hydraulic Disc Hydraulic Disc Hydraulic Disc
Rear of Seat Rear of Seat Rear of Seat
Standard Standard Standard
Standard Standard Standard
Standard Standard Standard
High Temp Ind. Standard N/A
N/A Standard Option
Standard ESIDel
Option Standard Standard
Option Option Option
Standard Deluxe
Option Option Option
Standard Deluxe
Option Option Option
Option Option Option
8/94
13. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
14. MODELS AND SPECIFICATIONS
1988 Model Identification
Indy Sport Sprint
0880433 0880931
Engine Type Fan Cooled Twin Fan Cooled Twin
Displacement (cc) 339 339
Bore x Stroke (mm) 62 x 55.6 62 x 55.6
CarburetionfThrottle 2 Mikuni 2 Mikuni
Body VM30SS Slide VM30SS Slide
Oil Injected Standard Standard
Ignition COl COl
Alternator Output 12V 120W 12V 120W
Length (in.!cm.) 106.25/269.9 1021259.1
Width (in.!cm.) 41 .621105.7 40/101 .6
Height (in.!cm.) 42/106.7 44.5/113
Ski Stance (in.!cm.) 36.5/92.7 31/78.7
Track Width (in.!cm.) 15/38.1 15/38.1
Track Length Overall 120.96/307.2 108/274.3
(in.!cm.)
Fuel Capacity (U.S. 7.3/6.1 /27.7 7.5/6.2128.1
gal./lmp. gal./liters)
Recommended Fuel 88 Octane Min. 88 Octane Min.
Front Suspension Coil Spring IFS Mono Leaf
Brake Type Hydraulic Disc Mechanical Disc
Storage Rear of Seat Rear of Seat
Speedometer Standard Standard
Tachometer Option Option
Trip Odometer Standard N/A
Accessory Lights N/A N/A
Electric Start Option N/A
Handwarmers Option Option
Two-Up Seat N/A N/A
Backrest N/A N/A
Storage Rack Option Option
Tow Hitch Option Option
Star
0880927
Fan Cooled Single
244
72 x 60
1 Mikuni
VM30SS Slide
Standard
COl
12V 100W
102/259.1
40/101.6
44.5/113
31/78.7
15/38.1
108/274.3
7.5/6.2128.1
88 Octane Min.
Mono Leaf
Mechanical Disc
Rear of Seat
Option
Option
N/A
N/A
N/A
N/A
N/A
N/A
Option
Option
8/94 1.12
Long Track Star Trak
Reverse
0881549 0881027
Fan Cooled Twin Fan Cooled Single
432 244
67.72 x 60 72 x 60
2 Mikuni 1 Mikuni
VM34SS Slide VM30SS Slide
Standard Standard
COl COl
12V 120W 12V 100W
120.5/306.1 109/276.9
o
40/101.6 40/101.6
44.5/113 44.51113
31/78.7 31/78.7
15/38.1 15/38.1
148/376 133/337.8
7.5/6.2/28.1 7.5/6.2/28.1
88 Octane Min. 88 Octane Min.
Mono Leaf Mono Leaf
Mechanical Disc Mechanical Disc
Rack/Rear of Seat Rack/Rear of Seat
Standard Standard
Option Option o
N/A N/A
Neutral Ind. N/A
N/A N/A
Option N/A
N/A N/A
N/A N/A
Standard Standard
Standard Option
15. o
MODELS AND SPECIFICATIONS
1989 Model Identification
SERIAL NUMBER IDENTIFICATION
The machine serial number may be used as an aid in identifying machine model year. Referto the first digits in the serial number
for proper identification:
FIRST DIGITS
12
13
14
15
16
MODEL YEAR
1985
1986
1987
1988
1989
1989 MODEL DESIGNATION
YEAR DESIGNATION-----------;:=;:::JI~ ENGINE DESIGNATION
I 0 8 910 9 17
MODEL DESIGNATION _ _________ -'1
1989
MODEL DESIGNATION
NUMBERS (Chassis)
09 - Star/Sprint (ES)
10- StarTrak
1989
ENGINE DESIGNATION
NUMBERS
27 - EC25PS-Single FC
1989
ENGINE DESIGNATION
NUMBERS
59 - EC40PL-02-Twin LC
61 - EC50PM-01 -Twin FC
15 - LongTrak LTR
01 - Indy Trail SuperTrak
02 - Indy Trail Deluxe
31 - EC34-2PM-02-Twin FC ES
33 - EC34-2PM-01-03-Twin FC
49 - EC44-2PM-4100-Twin FC
58 - EC65PL-01-Triple LC
62 - EC50PM-02-Twin FC ES
64 - EC50PL-01-Twin LC
04 - Indy Sport
05 - Indy 133 SKS
06 - Indy Trail SP
07 - Indy 440, 500, 650
08 - Indy 500 Classic
24 Indy Sport GT
65 - EC50PL-02-Twin LC ES
MODEL NO. MADE IN U.S.A. PCLRRIS
PATENT NOTICE
SERIAL NO.
THIS VEHICLE CONFORMS TO ALL APPLICABLE U.S.
FEDERAL AND STATE REQUIREMENTS AND
CANADIAN FEDERAL MOTOR VEHICLE STANDARDS
IN EFFECT ON THE DATE OF MANUFACTURE.
MFD. DATE:
Mfd. by Polaris Industries L.P.
in Roseau, MN under one or more of the following patents:
U.S. Patents 3,605,51t 3,533,662 3,6t3,811
3,580,647 3,613,810 3,605,510
3,483,766 3,545,821 3,525,412
Patented Canada 882,491171 883 .694171
Canadian Rd. 34,573171 34 ,572171
These numbers should be referred to in any correspondence regarding warranty, service or replacement parts.
3,867,991
4,793,950
5,038,881
864,39417t
1,227,823/87
7072133
The machine model and serial number identification decal is located on the right front side of the tunnel. The serial number is
permanently stamped into the tunnel. The model number is embossed on the decal.
Whenever corresponding about an engine it is important that the engine model and serial numbers be called out. Laser
engraved model and serial numbers are located on the crankcase (intake side).
1.13 8/94