The most important reasons for calibrating an instrument are to guarantee that it is reliable and that it can be relied upon. Measurement of the instrument’s accuracy and consistency of results with other measures were performed. So, let’s have a look at the need for calibrating the survey equipment. Product quality is improved by the use of accurate measurement instruments by calibration companies in the UAE. You can also contact Falcon Geomatics for the best services.

1. Why Need To
Calibrate
Survey
Equipment?

2. The most important reasons for calibrating an instrument
are to guarantee that it is reliable and that it can be relied
upon. Measurement of the instrument’s accuracy and
consistency of results with other measures were
performed. So, let’s have a look at the need for calibrating
the survey equipment.

3. Cost reductions
When you consider the costs associated with
any legal action for damages that may be
brought against you, the fees associated with
correct calibration and adjustment are
insignificant in contrast. Consequently,
companies that take their responsibilities
seriously and seek to develop long-term
business connections must calibrate their
equipment on a regular basis to ensure that
it is operating properly. It may also invalidate
your warranty if your equipment has not
been calibrated properly.

4. It is likely that accurate measurement
will be the most efficient method of
avoiding expensive repairs or even
insurance claims for damages.
Specifically, this is true in the context of
international quality management
standards (such as ISO 9000 and
HACCP), as well as in the context of
product liability claims based on state
and federal product liability laws.
There is no quality
assurance if there is no
quantitative data.

5. Calibration and adjustment are necessary
A measurement error is a discrepancy between the measured
value of a quantity and the real value of the item being
measured. The longer a device has been in operation, the more
likely it is to have such mistakes. At some point, the variations
may become so significant that they no longer fall within
acceptable tolerances, indicating that quality is no longer
guaranteed, as previously stated.

6. The measurement inaccuracy of the instrument
may be measured and recorded by calibrating
the device. If the measurements go outside of
the permitted range, the instrument must be
calibrated to compensate. During this
procedure, the measuring instrument is
reconfigured in such a way that measurement
errors are kept to a minimum and deviations
from the setpoint value are kept within the
parameters of the device.

7. Under static operating
circumstances, a single point survey
equipment calibration service is
adequate for quality assurance
purposes. Crushing and
reconditioning systems for
compressed air are often operated
under continuously changing,
dynamic ambient and operational
circumstances, resulting in
fluctuations in the quality of
compressed air quality within the
measurement range and within the
system-defined limits (such as those
of the compressed air quality
classes according to ISO 8573.1).

8. https://medium.com/@falcongeosyste
m/why-need-to-calibrate-survey-
equipment-4b5b7ff3ccbe
For More Information

9. In the long run, the precision of all measurement instruments decreases.
This is most often caused by natural wear and tear on the vehicle. In some
instances, the degradation of an instrument might take place extremely fast,
while in others, it can take place over an extended period.
The basic conclusion is that
calibrating a piece of measuring
equipment increases the
accuracy of the instrument.
Product quality is improved by
the use of accurate
measurement instruments by
calibration companies in the
UAE. You can also contact
Falcon Geomatics for the best
services.

10. Contact Details
+971 4 327 9333
+971 4 2299555
Ahammed Kamal Warehouse
6, Street 10C, Ras al Khor
Industrial 1, PO.Box.238544
Dubai, United Arab Emirates
sales@falcon-geosystems.com
service@falcon-
geosystems.com
Phone
Address
Link

11. Thank
You