GML-3 is three phase multifunction meter with inbuilt GPRS and SD dual Logger. It measures three phase energy data upload it on the server and also SD Card. It has various other parameters such as Maximum demand,TOD Billing DG on/off status, Electricity board supply on/off status. It has saperate KWH/KVAH for DG. For alarm it has SMS and Email notification. Alarms are also programmable. Alarm events are stored on meter and also server with date and time. SD Card data can be analyzed through Software and server data can be accessed on gml3.com. Data can be viewed in table and graph form. Maximum,minimum and avg values are also added to report. We have newest technolgy for data access through mobile. Just Send the SMS Code to meter mobile number and the required data will be sent by SMS on registered mobile number It has following Features 1. GPRS Data transmission and Dual Data Logging(Server and SD Card) 2. Upload Data via GPRS and also SD card 3. Alarm notification via SMS and E-mail 4. Three phase energy measurement 5. ALL phase V,A,W,PF,KWH,KVAH 6. Generator/UPS KWh/KVAh 7. Maximum demand with predicted demand and last demand 8. Load run hour 9. Option to reset all energy parameter 10. Internal real time clock correct up to 2 sec/year 11. TOD (Time of Day) billing.(4 TOD slots are available) 12. DG monitoring with Electricity board 13. Diesel consumption monitoring 14. UPS Monitoring with Electricity board 15. 100 Latest events are stored in meter memory with date and time 16. Unlimited event storage on server with date and time 17. Customize alarm triggers such as customize P.F. alarm for no current low currents, current limits. 18. For example if you have APFC which have condition that it will maintain PF level above 0.9 for current is greater than 50 A and maintain PF of 0.7 for load current between 20A to 50A. In normal meters it is not possible to set alarm to monitor above condition but in GML-3 it is possible to set alarm trigger to monitor this condition. (See Trigger note) 19. You can also know if there is any diesel wastage. It provides DG on off alarm with Electricity supply on off. If your DG is on when the electricity supply is also on you can also set alarm for this. So you will know if there is diesel waste. 20. It will also provide DG run time on server and meter so if there is diesel theft you can also know.