SuperOx produces customizable 2G HTS wire in widths of 4 and 12 mm with critical currents ranging from 100-500 A depending on the width, and can apply silver and copper coatings between 0-10 and 0-50 microns thick respectively on substrate materials like Hastelloy C276. They also develop customized coating deposition equipment and critical current measurement devices, and use their 2G HTS wire to produce fault current limiters, power cables, motors, generators, energy storage, magnets, and magnetic levitation systems.

2. SuperOx produces 2G HTS wire with 12 and 4 mm widths and wide range of thorough customization.
Width, mm 4 and 12
Critical current, A *
100-150 A for 4 mm
350-500 A for 12 mm
Silver coating thickness, microns 0-10
Copper coating thickness, microns ** 0-50
Substrate material Hastelloy C276, non-magnetic
Tape thickness, microns *** ~ 65
Single piece length, m up to 500
* at 77.3K in self magnetic field, 1 microvolt/cm criterion
** on both sides of the tape (surrounding electroplated coating)
*** without thickness of copper coating

3. Our company develops and builds customized equipment for coating
deposition on moving tapes with the help of chemical and physical
methods and customized analytical equipment for critical current
measurements of HTS tapes.
SuperOx develops electrical equipment using 2G HTS wire including:
Fault current limiters
HTS Power Cables
Electrical motors and generators
Energy storage devices
Magnets for scientific and healthcare equipment
Magnetic levitation systems