The document provides instructions for disassembling an excavator travel motor. It describes 28 steps to disassemble the various components of the travel motor, including removing the head assembly, brake piston, rotating assembly, pistons, seals, and other parts. Various tools are required including retaining ring pliers, a bearing puller, eyebolts, and adapters. Safety precautions are provided to release spring forces carefully.
Caterpillar cat 330 f excavator (prefix ght) service repair manual (ght00001 ...fjskkksmemm
This document provides instructions for disassembling a 330F excavator travel motor. It outlines 28 steps to completely disassemble the travel motor, removing components like the head assembly, housing assembly, rotating group, pistons, and more. Detailed illustrations accompany each step to show how to remove seals, springs, plates, and other parts using various specialized tools. Safety notices are included throughout to warn of potential injury risks like parts propelled by springs.
Caterpillar cat 330 f excavator (prefix hck) service repair manual (hck00001 ...fjskkksmemm
The document is a service repair manual that provides instructions for disassembling a 330F excavator travel motor. It outlines 28 steps to fully disassemble the travel motor, removing components like the head assembly, housing assembly, brake piston, rotating group, pistons, and more. Various tools are required to remove fasteners and components. Safety precautions are provided throughout to warn of spring forces, pressurized fluids, and other hazards during disassembly.
Caterpillar cat 330 f excavator (prefix lbn) service repair manual (lbn00001 ...fjskekdmjekm
The document provides instructions for disassembling a 330F LN excavator travel motor. It describes 28 steps to disassemble the various components of the travel motor, including removing the head assembly, housing assembly, brake piston, friction discs, rotating group, pistons, and other internal parts. Detailed illustrations are provided to accompany each step of the disassembly process. Safety notices are included throughout to warn of potential hazards like released spring forces.
Caterpillar cat 330 f ln excavator (prefix wba) service repair manual (wba000...fksjksmmde
The document provides step-by-step instructions to disassemble a travel motor. It begins by listing required tools and fasteners. The procedures then describe how to remove 27 components of the travel motor including the head assembly, housing assembly, brake piston, rotating group, pistons, and seals. Detailed illustrations accompany each step to show how to properly disassemble the travel motor.
Kubota m5500 dt tractor parts catalogue manualdfjjsjkemmm
The document provides instructions and part listings for a parts book. It defines the column headings used on part number pages, including reference number, part number, description, quantity, serial number range, interchangeability, and remarks. It also notes country codes that may be included to indicate part differences by country. The summary lists the main document sections and provides an example part listing for a crankcase.
Kubota m5040 hdc tractor parts catalogue manualdfjjsjkemmm
The document provides parts information for an engine, including:
- Descriptions of column headings for part number pages like part number, name, quantity, etc.
- Parts lists organized by component (e.g. crankcase, oil pan, cylinder head) with part numbers, names, quantities, and other details.
- Notes on country codes used for parts that may differ between countries.
Kubota l4610 dt hst tractor parts catalogue manualdfjjsjkemmm
This document provides part numbers and descriptions for a crankcase, including the crankcase itself along with various plugs, caps, pins, and other component parts. Key information includes the part number, description, quantity used, applicable serial number range, interchangeability, and remarks.
Kubota l4400 h tractor parts catalogue manualdfjjsjkemmm
The document provides instructions and part numbers for a parts book. It defines the column headings used on part number pages, including reference number, part number, part name, quantity, serial number range, and remarks. It notes country codes that may be included and what they indicate. Sample pages from the parts book are then provided that list part numbers, descriptions, quantities and other details for specific assembly items like the crankcase, oil pan, cylinder head, gear case and more.
Caterpillar cat 330 f excavator (prefix ght) service repair manual (ght00001 ...fjskkksmemm
This document provides instructions for disassembling a 330F excavator travel motor. It outlines 28 steps to completely disassemble the travel motor, removing components like the head assembly, housing assembly, rotating group, pistons, and more. Detailed illustrations accompany each step to show how to remove seals, springs, plates, and other parts using various specialized tools. Safety notices are included throughout to warn of potential injury risks like parts propelled by springs.
Caterpillar cat 330 f excavator (prefix hck) service repair manual (hck00001 ...fjskkksmemm
The document is a service repair manual that provides instructions for disassembling a 330F excavator travel motor. It outlines 28 steps to fully disassemble the travel motor, removing components like the head assembly, housing assembly, brake piston, rotating group, pistons, and more. Various tools are required to remove fasteners and components. Safety precautions are provided throughout to warn of spring forces, pressurized fluids, and other hazards during disassembly.
Caterpillar cat 330 f excavator (prefix lbn) service repair manual (lbn00001 ...fjskekdmjekm
The document provides instructions for disassembling a 330F LN excavator travel motor. It describes 28 steps to disassemble the various components of the travel motor, including removing the head assembly, housing assembly, brake piston, friction discs, rotating group, pistons, and other internal parts. Detailed illustrations are provided to accompany each step of the disassembly process. Safety notices are included throughout to warn of potential hazards like released spring forces.
Caterpillar cat 330 f ln excavator (prefix wba) service repair manual (wba000...fksjksmmde
The document provides step-by-step instructions to disassemble a travel motor. It begins by listing required tools and fasteners. The procedures then describe how to remove 27 components of the travel motor including the head assembly, housing assembly, brake piston, rotating group, pistons, and seals. Detailed illustrations accompany each step to show how to properly disassemble the travel motor.
Kubota m5500 dt tractor parts catalogue manualdfjjsjkemmm
The document provides instructions and part listings for a parts book. It defines the column headings used on part number pages, including reference number, part number, description, quantity, serial number range, interchangeability, and remarks. It also notes country codes that may be included to indicate part differences by country. The summary lists the main document sections and provides an example part listing for a crankcase.
Kubota m5040 hdc tractor parts catalogue manualdfjjsjkemmm
The document provides parts information for an engine, including:
- Descriptions of column headings for part number pages like part number, name, quantity, etc.
- Parts lists organized by component (e.g. crankcase, oil pan, cylinder head) with part numbers, names, quantities, and other details.
- Notes on country codes used for parts that may differ between countries.
Kubota l4610 dt hst tractor parts catalogue manualdfjjsjkemmm
This document provides part numbers and descriptions for a crankcase, including the crankcase itself along with various plugs, caps, pins, and other component parts. Key information includes the part number, description, quantity used, applicable serial number range, interchangeability, and remarks.
Kubota l4400 h tractor parts catalogue manualdfjjsjkemmm
The document provides instructions and part numbers for a parts book. It defines the column headings used on part number pages, including reference number, part number, part name, quantity, serial number range, and remarks. It notes country codes that may be included and what they indicate. Sample pages from the parts book are then provided that list part numbers, descriptions, quantities and other details for specific assembly items like the crankcase, oil pan, cylinder head, gear case and more.
Kubota l4310 dt gst-chst-c tractor parts catalogue manualdfjjsjkemmm
The document provides instructions and definitions for parts books. It explains that the parts book headings will match the picture pages. It defines the column headings for part number pages, including reference number, part number, description, quantity, serial number range, interchangeability, and remarks. It also notes country codes that may be included to indicate part differences by country.
Kubota l3410 hst tractor parts catalogue manualdfjjsjkemmm
This document provides instructions and definitions for parts books. It explains the column headings used on parts number pages, including the reference number, part number, description, quantity, serial number range, interchangeability, and remarks. Country codes that may be included are also defined. An example page from the parts book is then shown listing specific part numbers, descriptions, and the book they can be found in.
Kubota l3410 gst tractor parts catalogue manualdfjjsjkemmm
This document provides instructions and definitions for parts books. It explains the column headings used on parts number pages, including the reference number, part number, description, quantity, serial number range, interchangeability, and remarks. Country codes that may be included are also defined. An example page from the parts book is then shown listing specific part numbers, descriptions, and the book they can be found in.
Kubota l3410 dt tractor parts catalogue manualdfjjsjkemmm
This document provides instructions and definitions for parts books. It explains the column headings used on parts number pages, including the reference number, part number, description, quantity, serial number range, interchangeability, and remarks. Country codes that may be included are also defined. An example page from the parts book is then shown listing specific part numbers, descriptions, and the book they can be found in.
Kubota l3300 dt gst tractor parts catalogue manualdfjjsjkemmm
This document provides instructions for parts books. It explains the column headings used on parts pages including reference number, part number, description, quantity, serial number range and interchangeability. It also notes country codes that may be included to indicate part differences between countries. The document then provides an example page from a parts book listing parts for an engine crankcase.
Kubota l3130 hst tractor parts catalogue manualdfjjsjkemmm
The document provides instructions for parts books, including definitions of column headings in parts number pages such as reference number, part number, description, quantity, serial number range. It also notes country codes that may be included for parts that differ by country, such as parts working in all countries except France. The document then provides an index of parts for a tractor model broken down by system such as engine, fuel, electrical, transmission, hydraulics, with part numbers and references to parts books.
Kubota l3130 gst tractor parts catalogue manualdfjjsjkemmm
The document provides instructions for parts books, including definitions of column headings in parts number pages such as Reference Number, Part Number, Description, Quantity, Serial Number range, Interchangeability, and Remarks. It also notes country codes that may be included, such as exceptions for parts in other countries like France (FR). Diagrams of product parts are indexed for locating specific components.
Kubota l3130 dt tractor parts catalogue manualdfjjsjkemmm
The document provides instructions for parts books, including definitions of column headings in parts number pages such as reference number, part number, description, quantity, serial number range. It also notes country codes that may be included for parts that differ by country, such as parts working in all countries except France. The document then provides an index of parts for a tractor model broken down by system such as engine, fuel, electrical, transmission, hydraulics, with part numbers and references to parts books.
Kubota l2900 f tractor parts catalogue manualdfjjsjkemmm
This document provides an index and part listings for an L2900F product. It includes sections for the engine, fuel system, cooling water system, electrical system, clutch, transmission, rear axle, brake, front axle, steering, hydraulic system, hood, labels, and accessories. Each section lists the relevant part numbers, descriptions, quantities, and other specifications for the individual components.
Kubota l2900 dt tractor parts catalogue manualdfjjsjkemmm
The crankcase parts list includes over 230 individual parts that make up the crankcase assembly. It lists each part number, description, quantity used, applicable serial number range, interchangeability, remarks, and weight. Key details included are the total weight of the assembled crankcase (48.5kg/106.7lbs) and that most common individual parts like plugs and seals weigh only a few grams.
Kubota l2800 hst tractor parts catalogue manualdfjjsjkemmm
This document provides instructions for using a parts book for a tractor model. It defines the column headings used on parts number pages, including the part reference number, part number, description, quantity, serial number range, interchangeability, and remarks. It also notes country codes that may be included to indicate if a part is different for other countries. The document then provides an index of parts for the tractor model with the part number and relevant parts book for each item.
Kubota l2800 dt tractor parts catalogue manualdfjjsjkemmm
This document provides instructions for using parts books and describes the column headings used on parts number pages. It explains that country codes may be included to indicate if a part is different for other countries. Finally, it lists frequently used parts for a L2800DT/HST tractor, including the part number, description, and reference book for each part.
Kubota l2600 dt tractor parts catalogue manualdfjjsjkemmm
This document provides part numbers and descriptions for a cylinder head. It includes a list of 170 parts with information on the part number, description, quantity used, applicable serial number range, interchangeability, and remarks. It notes country codes that may be relevant for part interchangeability between countries like the US, Canada, France, etc. The total weight of the cylinder head component is provided at the end.
Kubota l2500 f tractor parts catalogue manualdfjjsjkemmm
The document provides instructions and part numbers for a parts book. It lists the column headings used on parts pages including the reference number, part number, description, quantity, serial number range and other details. It then provides an example page from the parts book with over 250 individual part numbers listed for the crankcase component.
Kubota l2500 dt tractor parts catalogue manualdfjjsjkemmm
The document provides instructions for parts books. It defines the column headings used on parts number pages, including reference number, part number, description, quantity, serial number range, interchangeability, and remarks. Country codes are also explained, with symbols indicating the country each part is for (e.g. A for USA, CA for Canada, FR for France). An example page from a parts book is then shown listing parts for an engine crankcase, with the corresponding information for each part.
Kubota l2350 dt tractor parts catalogue manualdfjjsjkemmm
The document provides instructions and part numbers for a parts book. It defines the column headings used on part number pages, including reference number, part number, description, quantity, serial number range, interchangeability, and remarks. It also notes country codes that may be included and what they represent. The document then provides an example page from the parts book that lists part numbers, descriptions and other details for various engine parts.
Kubota l355 ss tractor parts catalogue manualdfjjsjkemmm
The document provides instructions and definitions for parts books. It explains that the heading on parts pages will match the picture pages. It defines the column headings for part number pages, including reference number, part number, description, quantity, serial number range, interchangeability, remarks, and country codes. It provides an example product index page and section parts group page from a parts book.
Kubota l295 dt tractor parts catalogue manualdfjjsjkemmm
The document provides instructions and definitions for parts books. It defines column headings for part number pages including reference number, part number, description, quantity, serial number range, interchangeability, and remarks. It notes country codes that may be included for parts that differ by country. The example pages then list over 350 individual part numbers, descriptions, and specifications for an engine and related systems.
Kubota l245 f tractor parts catalogue manualdfjjsjkemmm
The document provides instructions for parts books, including definitions of column headings in parts number pages such as Reference Number, Part Number, Description, Quantity, Serial Number range, Interchangeability, and Remarks. It also notes country codes that may be included and their meanings.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Kubota l4310 dt gst-chst-c tractor parts catalogue manualdfjjsjkemmm
The document provides instructions and definitions for parts books. It explains that the parts book headings will match the picture pages. It defines the column headings for part number pages, including reference number, part number, description, quantity, serial number range, interchangeability, and remarks. It also notes country codes that may be included to indicate part differences by country.
Kubota l3410 hst tractor parts catalogue manualdfjjsjkemmm
This document provides instructions and definitions for parts books. It explains the column headings used on parts number pages, including the reference number, part number, description, quantity, serial number range, interchangeability, and remarks. Country codes that may be included are also defined. An example page from the parts book is then shown listing specific part numbers, descriptions, and the book they can be found in.
Kubota l3410 gst tractor parts catalogue manualdfjjsjkemmm
This document provides instructions and definitions for parts books. It explains the column headings used on parts number pages, including the reference number, part number, description, quantity, serial number range, interchangeability, and remarks. Country codes that may be included are also defined. An example page from the parts book is then shown listing specific part numbers, descriptions, and the book they can be found in.
Kubota l3410 dt tractor parts catalogue manualdfjjsjkemmm
This document provides instructions and definitions for parts books. It explains the column headings used on parts number pages, including the reference number, part number, description, quantity, serial number range, interchangeability, and remarks. Country codes that may be included are also defined. An example page from the parts book is then shown listing specific part numbers, descriptions, and the book they can be found in.
Kubota l3300 dt gst tractor parts catalogue manualdfjjsjkemmm
This document provides instructions for parts books. It explains the column headings used on parts pages including reference number, part number, description, quantity, serial number range and interchangeability. It also notes country codes that may be included to indicate part differences between countries. The document then provides an example page from a parts book listing parts for an engine crankcase.
Kubota l3130 hst tractor parts catalogue manualdfjjsjkemmm
The document provides instructions for parts books, including definitions of column headings in parts number pages such as reference number, part number, description, quantity, serial number range. It also notes country codes that may be included for parts that differ by country, such as parts working in all countries except France. The document then provides an index of parts for a tractor model broken down by system such as engine, fuel, electrical, transmission, hydraulics, with part numbers and references to parts books.
Kubota l3130 gst tractor parts catalogue manualdfjjsjkemmm
The document provides instructions for parts books, including definitions of column headings in parts number pages such as Reference Number, Part Number, Description, Quantity, Serial Number range, Interchangeability, and Remarks. It also notes country codes that may be included, such as exceptions for parts in other countries like France (FR). Diagrams of product parts are indexed for locating specific components.
Kubota l3130 dt tractor parts catalogue manualdfjjsjkemmm
The document provides instructions for parts books, including definitions of column headings in parts number pages such as reference number, part number, description, quantity, serial number range. It also notes country codes that may be included for parts that differ by country, such as parts working in all countries except France. The document then provides an index of parts for a tractor model broken down by system such as engine, fuel, electrical, transmission, hydraulics, with part numbers and references to parts books.
Kubota l2900 f tractor parts catalogue manualdfjjsjkemmm
This document provides an index and part listings for an L2900F product. It includes sections for the engine, fuel system, cooling water system, electrical system, clutch, transmission, rear axle, brake, front axle, steering, hydraulic system, hood, labels, and accessories. Each section lists the relevant part numbers, descriptions, quantities, and other specifications for the individual components.
Kubota l2900 dt tractor parts catalogue manualdfjjsjkemmm
The crankcase parts list includes over 230 individual parts that make up the crankcase assembly. It lists each part number, description, quantity used, applicable serial number range, interchangeability, remarks, and weight. Key details included are the total weight of the assembled crankcase (48.5kg/106.7lbs) and that most common individual parts like plugs and seals weigh only a few grams.
Kubota l2800 hst tractor parts catalogue manualdfjjsjkemmm
This document provides instructions for using a parts book for a tractor model. It defines the column headings used on parts number pages, including the part reference number, part number, description, quantity, serial number range, interchangeability, and remarks. It also notes country codes that may be included to indicate if a part is different for other countries. The document then provides an index of parts for the tractor model with the part number and relevant parts book for each item.
Kubota l2800 dt tractor parts catalogue manualdfjjsjkemmm
This document provides instructions for using parts books and describes the column headings used on parts number pages. It explains that country codes may be included to indicate if a part is different for other countries. Finally, it lists frequently used parts for a L2800DT/HST tractor, including the part number, description, and reference book for each part.
Kubota l2600 dt tractor parts catalogue manualdfjjsjkemmm
This document provides part numbers and descriptions for a cylinder head. It includes a list of 170 parts with information on the part number, description, quantity used, applicable serial number range, interchangeability, and remarks. It notes country codes that may be relevant for part interchangeability between countries like the US, Canada, France, etc. The total weight of the cylinder head component is provided at the end.
Kubota l2500 f tractor parts catalogue manualdfjjsjkemmm
The document provides instructions and part numbers for a parts book. It lists the column headings used on parts pages including the reference number, part number, description, quantity, serial number range and other details. It then provides an example page from the parts book with over 250 individual part numbers listed for the crankcase component.
Kubota l2500 dt tractor parts catalogue manualdfjjsjkemmm
The document provides instructions for parts books. It defines the column headings used on parts number pages, including reference number, part number, description, quantity, serial number range, interchangeability, and remarks. Country codes are also explained, with symbols indicating the country each part is for (e.g. A for USA, CA for Canada, FR for France). An example page from a parts book is then shown listing parts for an engine crankcase, with the corresponding information for each part.
Kubota l2350 dt tractor parts catalogue manualdfjjsjkemmm
The document provides instructions and part numbers for a parts book. It defines the column headings used on part number pages, including reference number, part number, description, quantity, serial number range, interchangeability, and remarks. It also notes country codes that may be included and what they represent. The document then provides an example page from the parts book that lists part numbers, descriptions and other details for various engine parts.
Kubota l355 ss tractor parts catalogue manualdfjjsjkemmm
The document provides instructions and definitions for parts books. It explains that the heading on parts pages will match the picture pages. It defines the column headings for part number pages, including reference number, part number, description, quantity, serial number range, interchangeability, remarks, and country codes. It provides an example product index page and section parts group page from a parts book.
Kubota l295 dt tractor parts catalogue manualdfjjsjkemmm
The document provides instructions and definitions for parts books. It defines column headings for part number pages including reference number, part number, description, quantity, serial number range, interchangeability, and remarks. It notes country codes that may be included for parts that differ by country. The example pages then list over 350 individual part numbers, descriptions, and specifications for an engine and related systems.
Kubota l245 f tractor parts catalogue manualdfjjsjkemmm
The document provides instructions for parts books, including definitions of column headings in parts number pages such as Reference Number, Part Number, Description, Quantity, Serial Number range, Interchangeability, and Remarks. It also notes country codes that may be included and their meanings.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 330F EXCAVATOR GHT
Configuration: 330F L Excavator GHT00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
326F, 329F and 330F Excavators Machine Systems
Media Number -UENR3313-07 Publication Date -01/09/2015 Date Updated -12/09/2018
i05435976
Travel Motor - Disassemble
SMCS - 4351-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
1U-7506 Adapter 1
8T-4244 Nut 6
8T-4223 Hard Washer 6
- Threaded RodM12 x 1.75 by 250 mm (10 inch) 1
B
8T-0651 Bolt 1
8T-4167 Hard Washer 1
C 3E-3882 Eyebolt 1
D 1P-1859 Retaining Ring Pliers 1
E
1P-0510 Driver Gp 1
9S-9152 Bearing Puller Gp 1
F 1P-1861 Retaining Ring Pliers 1
Start By:
a. Remove the travel motor.
1/10(W)
w
2020/6/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
3. NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
1. Thoroughly clean the outside of the travel motor prior to disassembly.
2. Fasten the travel motor in Tooling (A) in a vertical position. The weight of the travel motor
is approximately 60 kg (132 lb).
3. Put an alignment mark across the head and the body of the travel motor for assembly
purposes. The head must be reinstalled in the original position on the body of the travel
motor.
Illustration 1 g00887295
Note: During the removal of head (2) from the travel motor, be careful not to damage the
mating surfaces of the components.
Spring force can cause personal injury or death.
Do not repair until you have read the Operation and Maintenance
Manual.
2/10(W)
w
2020/6/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
4. 4. Remove bolts (1).
5. Remove head (2) from the body of the travel motor.
Illustration 2 g00887302
6. Remove O-ring seal (3), port plate (4), and bearing (5).
Illustration 3 g00887311
7. Remove O-ring seals (6). Remove springs (7).
Illustration 4 g00887331
3/10(W)
w
2020/6/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
5. Illustration 5 g00890074
A typical example of the use of Tooling (B).
8. Place a shop towel over brake piston (8). Retain brake piston (8) with Tooling (B). Apply
approximately 525 kPa (75 psi) of shop air pressure to brake release Port (Y). Make sure
that the shop air pressure is free of water. Brake piston (8) will move up the piston guide,
and out of the piston guide. Remove brake piston (8) from the body of the travel motor.
Illustration 6 g00887336
9. Remove seal (9) and backup ring (10) from the brake piston.
10. Remove seal (11) and backup ring (12) from the brake piston.
4/10(W)
w
2020/6/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
6. Illustration 7 g00887355
11. Remove plates (13) and friction discs (14).
Illustration 8 g00887401
Illustration 9 g00887405
12. Install Tooling (C) into shaft (15). Use a prybar to remove the rotating assembly (16) from
the housing.
13. Remove Tooling (C) from shaft (15).
Illustration 10 g00887424
5/10(W)
w
2020/6/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
7. 14. Remove shaft (15) from the rotating assembly .
Illustration 11 g00887426
15. Use Tooling (D) in order to remove retaining ring (17) from shaft (15).
Illustration 12 g00887445
Illustration 13 g00887463
16. Install shaft (15) into a suitable press. Remove bearing race (18) from the shaft.
17. Rotate shaft (15). Install shaft (15) into a suitable press. Install Tooling (E). Remove bearing
race (19) from shaft (15).
6/10(W)
w
2020/6/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
8. Illustration 14 g00887501
18. Remove cam plate (20) from barrel assembly (21).
Illustration 15 g00887520
19. Remove piston assemblies and retainer plate (22) from barrel assembly (21).
Note: Place marks on the pistons and the barrel assembly. The pistons must be returned to
the original position.
Illustration 16 g00887558
7/10(W)
w
2020/6/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
9. 20. Remove ball (23) and springs (24).
Illustration 17 g03431370
21. Remove bearing (25).
22. Remove keys (26) and locating pins (not shown) from the body of the travel motor.
Illustration 18 g00887589
23. Rotate the housing. Use Tooling (F) in order to remove retaining ring (27).
24. Remove lip seal (28).
8/10(W)
w
2020/6/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
10. Illustration 19 g00887619
25. Remove bolts (29) and cover (30).
Illustration 20 g00887729
26. Remove seal (31) and backup ring (32).
Illustration 21 g00887754
27. Remove piston actuator (33) and seal (34).
Illustration 22 g00887762
9/10(W)
w
2020/6/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
11. 28. Remove O-ring seal (35) from the housing of the travel motor.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Jun 25 17:31:07 UTC+0800 2020
10/10(W)
w
2020/6/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
12. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 330F EXCAVATOR GHT
Configuration: 330F L Excavator GHT00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
326F, 329F and 330F Excavators Machine Systems
Media Number -UENR3313-07 Publication Date -01/09/2015 Date Updated -12/09/2018
i07505849
Travel Motor - Disassemble
SMCS - 4351-015
S/N - B321-UP
S/N - EBK1-UP
S/N - ERL1-UP
S/N - FBR1-UP
S/N - GGJ1-UP
S/N - GHT1-UP
S/N - HBT1-UP
S/N - HCA1-UP
S/N - HCJ1-UP
S/N - HCK1-UP
S/N - JFR1-UP
S/N - JHF1-UP
S/N - KFA1-UP
S/N - LBN1-UP
S/N - LCG1-UP
S/N - MBX1-UP
1/14(W)
w
2020/6/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
13. S/N - RCN1-UP
S/N - TMR1-UP
S/N - TPG1-UP
S/N - WBA1-UP
S/N - WGL1-UP
S/N - XFK1-UP
S/N - YHA1-UP
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
1P-2420 Transmission Repair Stand 1
FT-0957 Positioning Gp 4
B
- M16x2 Threaded Rod 3
8T-1757 Nut 6
9X-8268 Washer 6
C 421-5662 Lifting Eye Assembly 1
D 421-5663 Lifting Eye Assembly 2
E
1U-9895 Crossblock 1
3H-0465 Push-Puller Plate 2
8T-0298 Bolt 2
Start By:
a. Remove the travel motor.
2/14(W)
w
2020/6/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
14. Illustration 1 g06341880
1. Attach the travel motor to Tooling (A) and (B). The weight of the travel motor is
approximately 70 kg (154 lb).
2. Remove plugs (1) and the O-ring seals.
Illustration 2 g06344110
3. Remove plug (2) and the O-ring seal. Repeat for the opposite side.
Illustration 3 g06341912
3/14(W)
w
2020/6/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
15. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
4. Remove plug (2A) and the O-ring seal. Repeat for the opposite side.
Illustration 4 g06341915
5. Remove spring (3).
Illustration 5 g06341917
6. Remove spool (4).
4/14(W)
w
2020/6/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
16. Illustration 6 g06341942
Illustration 7 g06342000
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
7. Remove bolts (5) and cap (6). Repeat for the opposite side.
8. Remove O-ring seal (10) from cap (6). Remove guide (9), spring (8), and washer (7) from
the head assembly. Repeat for the opposite side.
5/14(W)
w
2020/6/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
17. Illustration 8 g06342005
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
9. Remove plug (11), O-ring seal (12), spring (13), and ball (14) from cap (6). Repeat for the
other cap.
Illustration 9 g06342009
10. Remove spool (15).
6/14(W)
w
2020/6/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
18. Illustration 10 g06343314
Illustration 11 g06343315
11. Remove relief valve (16). Remove O-ring seal (17) from relief valve (16).
12. Repeat for the opposite side.
Illustration 12 g06343359
7/14(W)
w
2020/6/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
19. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
13. Remove the nuts of Tooling (B). Remove bolts (19) from head assembly (18).
Illustration 13 g06343366
14. Use Tooling (C) and a suitable lifting device to remove head assembly (18). The weight of
head assembly (18) is approximately 21 kg (47 lb).
Illustration 14 g06343374
15. Remove control plate (20) and bearing (21) from head assembly (18).
8/14(W)
w
2020/6/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
20. Illustration 15 g06343381
16. Remove pins (22) and springs (23).
17. Remove O-ring seals (24) and (25).
Illustration 16 g06343383
18. Use Tooling (D) and a suitable lifting device to remove housing assembly (26) from
Tooling (A) and place on a suitable bench.
Illustration 17 g06343417
9/14(W)
w
2020/6/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
21. To avoid personal injury, always wear eye and face protection when
using pressurized air.
19. Attach Tooling (E) to housing (26). Use air pressure to unseat brake piston (27). Remove
Tooling (E) and brake piston (27).
Illustration 18 g06343437
20. Remove back up rings (28) and O-ring seals (29) from brake piston (27).
Illustration 19 g06343462
21. Remove brake piston guide (30).
10/14(W)
w
2020/6/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
22. Illustration 20 g06343464
22. Remove O-ring seal (31) from brake piston guide (30).
Illustration 21 g06343466
Illustration 22 g06343469
Note: Note the orientation of friction discs (32) and plates (33) for assembly purposes.
23. Remove friction discs (32) and plates (33).
11/14(W)
w
2020/6/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
23. Illustration 23 g06343638
24. Remove rotating group (34) from housing (26).
Illustration 24 g06343777
25. Remove pistons (35) and retainer (36) from barrel (37).
Illustration 25 g06343783
26. Remove hold down ball (38) and springs (39) from barrel (37).
12/14(W)
w
2020/6/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
25. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
26. Illustration 29 g06343795
30. Remove balls (46).
31. Remove bearing (44) and lip seal (45).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Jun 25 17:32:03 UTC+0800 2020
14/14(W)
w
2020/6/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
27. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 330F EXCAVATOR GHT
Configuration: 330F L Excavator GHT00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
326F, 329F and 330F Excavators Machine Systems
Media Number -UENR3313-07 Publication Date -01/09/2015 Date Updated -12/09/2018
i05435999
Travel Motor - Assemble
SMCS - 4351-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
1U-7506 Adapter 1
8T-4244 Nut 6
8T-4223 Hard Washer 6
- M12 x 1.75 X 250 mm (10 inch) Threaded Rod 1
C 3E-3882 Eyebolt 1
D 1P-1859 Retaining Ring Pliers 1
E
1P-0510 Driver Gp 1
9S-9152 Bearing Puller Gp 1
F 1P-1861 Retaining Ring Pliers 1
G - Loctite 242 -
1/10(W)
w
2020/6/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
28. Illustration 1 g00887762
1. Install O-ring seal (35) onto the housing of the travel motor.
Illustration 2 g00887754
2. Install seal (34) and piston actuator (33). Lubricate the surfaces of piston actuator (33) with
lubricant that is being sealed.
Illustration 3 g00887729
3. Install backup ring (32) and seal (31).
2/10(W)
w
2020/6/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...