2. Wall Mounted Lab Model Table Top pH mV Temp Indicator
Display : 3½ Digit LCD.
Range: pH : 0 - 14.00 pH
: ORP : 0-1999mV
Temp : -100°C to 199.9°C.
Accuracy : 0.5% ± 1 Digit.
Supply : 110/220V AC ± 10%.
Input Impendence : >10¹² Ohms for pH/ORP.
Calibration : For pH 4 AND pH 7.
Display Select : By touch membrane switch indication with LEDs.
Temp Compensation : Manual : Range 0 - 100°C
Automatic : Range 0 - 100°C
Outputs : pH : 4-20 mA Isolated for 0 -14 pH
: ORP : 1999 mV Non- Isolated
: TEMP : 0 - 1 V for 0-100°C Non Isolated.
Mounting :Wall Mounting on two Screws.
Size :160 mm x 170 mm
Depth :60 mm
Shipping Weight:900 grms..
Contact Us : +91 9810536887
Website : http://www.countronics.com/product-pH-and-ORP-indicators-controllers.html
3. Wall Mounted pH Indicator with 4 20mA Tx
Contact Us : +91 9810536887
Website :
http://www.countronics.com/product-pH-
and-ORP-indicators-controllers.html
4. Dual Limits pH Controller with Iso 4 20mA Tx Output
This device consists of a pH Monitor and
electronics, which control external devices,
based on the pH reading. Accordingly,
there are two adjustments that must be
made to the controller before putting into
service. The calibration of the electronics
which read the pH and the adjustments of
the controller set points. After the
controller is in service, it will be necessary
to re-confirm and perhaps re-calibrate the
pH monitor.
Contact Us : +91 9810536887
Website : http://www.countronics.com/product-pH-and-ORP-indicators-controllers.html
5. Dual Limits ORP Controller with Iso 4 20mA Tx Output
Contact Us : +91 9810536887
Website :
http://www.countronics.com/product-pH-
and-ORP-indicators-controllers.html