3. 3MM Gap
Problem : Finishing issues are there as the gap between the two doors of the lift is only 3MM.
Solution : One lift door needs to be opened for a human hand to get in
7. NO Space
Problem : Vinyl is not finished properly as there is no space on top as well
Solution : Needs to remove the doors and paste again
8. Problem: Bubbles in the vinyl as the glass doors are cleaned daily with Colin
Solution: Pl do not use water/colin on the etching.
9. Problem: Bubbles in the vinyl as the glass doors are cleaned daily with Colin
Solution: Pl do not use water/colin on the etching.
11. Problem : No creative on the back side.
Solution : New Creative on the back side needed. Was not there before.
