2. Check the Area
• You should make sure that the area where you
are planning to setup the bouncy house is not
hazardous.
• Check for any points which could hurt anyone,
or that there are no prolonged nails from the
walls.
3. Unpack the Bouncy House
• Place a sheet on the location where you are
planning to inflate the bouncy house.
• Make sure that the sheet stretches more than
the width of the bouncy house.
• Then unpack the bouncy castle in the middle
of the sheet.
4. Attach the Blower
• When you have placed the bouncy house,
then attach the blower to it.
• Insert the blowers one end into the inflation
tube, on some bouncy castles there is a strap
attached to the inflation tube.
• Make sure that the strap is secured to the
blower.
5. Connect it to Electricity
• For the blower to work you will need a power
supply.
• Connect the power cable of the blower to the
power socket and power it up.
• When the blower receives the power, turn it
on and blow up the bouncy house.
6. Secure the Bouncy House
• You should now have an inflated bouncy
castle, now you should look for a place to tie
the ends to.
• It is very important to secure a bouncy castle
such that it cannot be moved.
• Strong winds have the tendency to blow away
the bouncy castles.