1. TWILIGHT GEMS MANUFACTURING PRIVATE LIMITED. ANKUR CHHAJER PGDM - 09 MARKETING

5. STAGE 1 : WAX MOULDS

6. 1. Measuring the wax to be cut off

7. 2. Wax is cut to exact proportions to the finished ring.

8. 3. Wax is shaped to the design of the ring to be made.

9. 4. Shaping the setting for the gem stone.

10. 5. The gem stone fits the setting.

11. 6. Wax was injected into this rubbed to form the ring.

12. STAGE 2 : PLASTER MOULDS

13. 7. A removed wax ready to be casted.

14. 8. Mixing the plaster for the investment.

15. STAGE 3 : HEATING PROCESS

16. 9. Removing air from the investment before it goes to the oven.

17. 10. Here the investment stays in the oven over night.

18. 11. Alloy mix for yellow gold.

19. 12. The gold and the alloy are heated up to be casted.

20. 13. A tree of rings ready to be cut apart.

21. STAGE 4 : REFIREMENT

22. 14. Freshly casted rings.

23. 15. Lapping the shank of a new ring.

24. 16. Sanding burns off an extra ring.

25. 17. Soldering white gold onto a yellow gold ring.

26. 18. The hands of an artist shaping the finished gold.

27. STAGE 5 : CLEANING

28. 19. Rhodium platting on ring.

29. 20. The finished product as per the client’s requirement.

30. THANK YOU