Carbon monoxide (CO) competitively inhibits the binding of oxygen to h.pdf

•

0 likes•2 views

Carbon monoxide ( CO ) competitively inhibits the binding of oxygen to hemoglobin, and it binds to hemogiobin with an affirity nearty 250 imes grater invan axygan. When a molecule of CO binds to just one subunit of hemoglobin, all the other subunits experience diffculty releasing 02 to tissues, which an an iaad to suffocation. The graph below is an oxygen saturation curve for hemoglobin. in which groph 3 represents normal hemoglotin. Based on the description, soloct alf cortect etatementin. Carbon monoxide stabilizes the T state of hemoglobin Graph 1 most likely represents oxygen saturation of cur Carbon monoxide stabilizes the R state of hemoglobin.

Education

More from aksachdevahosymills

can you please answer all Questions Question 1 ( 16 points, 2 points each) Answer the following questions with True or False. (a) T MANET proactive protocols are characterized by low latency and high overhead. (b) I V2V- based localization estimates the location of a vehicle in relation to neighboring vehicles (c) WiFi localization is mostly used indoors. (d) T MANETs are easy to deploy. (e) F IEEE 1609.4: Describes security services for WAVE management and application messages (f) Topology- based routing protocols designed for MANETs are not adequate for VANETs. (g) F Dead reckoning has no errors since it relies heavily on the data read from equipped sensors in vehicles. (h) T Map matching, based on pattern recognition, is the main application used in localization when using digital maps stored in GIS database. Question 2 ( 5 points) State five main differences between VANETs and MANETs. no geod of communication Question 3 (5 points) Briefly discuss the challenges of broadcasting in VANETs. Question 4 (4 points) Briefly discuss the advantages and disadvantages of using the GPS as a localization technique in VANET..

can you please answer all Questions Question 1 ( 16 points- 2 points.pdf

aksachdevahosymills

can you please answer the blank based on the info below thanks Pease refer to your lab manual and fill in the following blanks with exactly one word: 1. The auxotrophic strain of E. coli that will be used today cannot independently synthesize tryptophan, an amino acid. They possess a mutation that prevents tryptophan synthesis and are thus said to be trp". 2. When the same E. coll are placed into a petri dish with an unidentified substance, they begin to grow and replicate quickly, forming over 50 colonies within the first 24 hours. Because these bacteria are rapidly multiplying, they must have undergone a mutation restoring their ability to synthesize tryptophan. 3. The Ames Test can reveal whether a specific chemical is a , or an agent that causes changes (mutations) to DNA. The mutagenicity of a chemical, or a chemical's ablity to cause mutations in DNA, is strongly correlated with the (cancer-causing ability) of that chemical. 4 Strains of bacteria with mutations that prevent them from synthesizing compounds necossary for cell growth are said to be In order for these bacteria to survive, the compounds that the bacteria cannot synthesize must be supplied in the growth media. 5 When the same E. coli (described in numbers 1 and 2) are placed into a petri dish containing just water, 11 colonies appear atter 24 hours. This plato (petri dish) represents the - control plate, and the number of colonies represents the mutation rate. (mutations) to DNA. The mutagenicity of a chemical, or a chemical's ability to cause mutations in DNA, is strongly correlated with the (cancer-causing ability) of that chemical. 4. Strains of bacteria with mutations that prevent them from synthesizing compounds necessary for cell growth are said to be . In order for these bacteria to survive, the compounds that the bacteria cannot synthesize must be supplied in the growth media. 5. When the same E. coll (described in numbers 1 and 2 ) are placed into a petri dish containing just water, 11 colonies appear after 24 hours This plate (petri dish) represents the _ control plate, and the number of colonies represents the mutation rate. 6. For the purposes of our lab today, we will consider a substance to be mutagenic if the number of bacterial colonies on that substance's plate is greater than the number of colonies on the negative control plate. 1. An unidentified substance is dropped onto the center of a petri dish plated with auxotrophic E. coll. 48 hours later, a circular area in the center of the petri dish apsears. Because there is no sign of any bacterial colonies here. this is likely a zone of and the substance is likely THE AMES TEST FOR MUTAGENESIS INTRODUCTION Human beings are exposed, often involuntarily, to a wide vatiety of chemicals in their daily lives. Now that much of the food we eat has been processed, many of these chemicals afe present in our diet. Also, convier the substances we rub on our skin and the molecules we spray into the air and breathe. We are.

can you please answer the blank based on the info below thanks Pease.pdf

aksachdevahosymills

Can you help me!- I'm trying to create a chatroom using Java Script an.pdf

aksachdevahosymills

Can you finish and write the int main for the code according to the instruction Thank you so much. Here's the code for the BSTNode ADT and BST implementation: #include <iostream> #include <fstream> #include <queue> using namespace std; // Krone class class Krone { private: int wholeValue; int fractionalValue; public: Krone() {} Krone(int whole, int fraction) : wholeValue(whole), fractionalValue(fraction) {} int getWhole() const { return wholeValue; } int getFraction() const { return fractionalValue; } bool operator<(const Krone& other) const { if (wholeValue < other.wholeValue) { return true; } else if (wholeValue == other.wholeValue) { return fractionalValue < other.fractionalValue; } else { return false; } } friend ostream& operator<<(ostream& out, const Krone& krone) { out << "Kr " << krone.wholeValue << "." << krone.fractionalValue; return out; } }; // BST Node class class BSTNode { private: Krone data; BSTNode* left; BSTNode* right; public: BSTNode() {} BSTNode(const Krone& krone) : data(krone), left(nullptr), right(nullptr) {} Krone getData() const { return data; } BSTNode* getLeft() const { return left; } BSTNode* getRight() const { return right; } void setData(const Krone& krone) { data = krone; } void setLeft(BSTNode* node) { left = node; } void setRight(BSTNode* node) { right = node; } }; // BST class class BST { private: BSTNode* root; public: BST() : root(nullptr) {} BSTNode* getRoot() const { return root; } bool isEmpty() const { return root == nullptr; } int countNodes(BSTNode* node) const { if (node == nullptr) { return 0; } else { return 1 + countNodes(node->getLeft()) + countNodes(node->getRight()); } } void empty(BSTNode* node) { if (node != nullptr) { empty(node->getLeft()); empty(node->getRight()); delete node; } } void insertNode(const Krone& krone) { BSTNode* node = new BSTNode(krone); if (isEmpty()) { root = node; } else { BSTNode* currNode = root; while (true) { if (krone < currNode->getData()) { if (currNode->getLeft() == nullptr) { currNode->setLeft(node); break; } else { currNode = currNode->getLeft(); } } else { if (currNode->getRight() == nullptr) { currNode->setRight(node); break; } else { currNode = currNode->getRight(); } } } } } BSTNode* searchNode(const Krone& krone) const { BSTNode* currNode = root; while (currNode != nullptr) { Declare and implement a BSTNode ADT with a data attribute and two pointer attributes, one for the left child and the other for the right child. Implement the usual getters/setters for these attributes. Declare and implement a BST as a link-based ADT whose data will be Krone objects - the data will be inserted based on the actual money value of your Krone objects as a combination of the whole value and fractional value attributes. For the BST, implement the four traversal methods as well as methods for the usual search, insert, delete, print, count, isEmpty, empty operations and any other needed. Your pgm will use the following 20 Krone objects to be created in the exact order in your.

Can you finish and write the int main for the code according to the in.pdf

aksachdevahosymills

Can you give me scientific papers that talk about Ways and methods of.pdf

aksachdevahosymills

Can you describe a time you acted with integrity? or someone you know did? how did it feel? what was the result? can you describe a rime when a public figure acted with integrity? what was the result? how did you feel, or what did you think, about her/him? can you describe a rime when a public figure acted with integrity? what was the result? how did you feel, or what did you think, about her/him?.

Can you describe a time you acted with integrity- or someone you know.pdf

aksachdevahosymills

Can you fix the errors? It isn't working when I try to run import sys from os import path # main() function def main(): order = [] completion = [] if len(sys.argv) == 3: filename = sys.argv[1] status = path.isfile(filename) if (status == False): print("Input batchfile not found!") return 1 elif (status == True): with open(filename) as f: array = [] for line in f: # read rest of lines array.append([int(x) for x in line.split(', ')]) f.close() n = len(array) burst = [] for i in range(n): burst.append(array[i][2]) arrival = [] for i in range(n): arrival.append(array[i][1]) avgw = 0 avgt = 0 turnaround = [] wait = [] if (sys.argv[2] == "ShortestRemaining"): order,completion = ShortestRemainingSort(array) print("PID ORDER OF EXECUTION: \n") for g in range(len(order)): print(order[g][0]) avgw , avgt , wait , turnaround = ComputeStat(completion , arrival, burst) print("\nAverage Process Turnaround Time:", avgt) print("Average Process Wait Time:", avgw) elif (sys.argv[2] == "RoundRobin"): order,completion = RoundRobinSort(array) print("PID ORDER OF EXECUTION: \n") for g in range(len(order)): print(order[g][0]) avgw , avgt , wait , turnaround = ComputeStat(completion , arrival, burst) print("\nAverage Process Turnaround Time:", avgt) print("Average Process Wait Time:" , avgw) else : print("Unidentified sorting algorithm. Please input either ShortestRemaining or RoundRobinSort.") return 1 else: print("Please provide command line arguments when running.\npython3 batchSchedulingComparison.py batchfile.txt RoundRobinSort") return 1 def ComputeStat(processCompletionTimes, processArrivalTimes, processBurstTimes): n = len(processBurstTimes) add1 = 0 add2 = 0 averagewait = 0 averagturnaround = 0 turnaround = [] wait = [] for i in range(n): turnaround.append(processCompletionTimes[i] - processArrivalTimes[i]) add1 += turnaround[i] wait.append(turnaround[i] - processBurstTimes[i]) add2 += wait[i] averagturnaround = add1 / n averagewait = add2 / n return averagewait , averagturnaround , wait , turnaround if __name__=="__main__": main() def ShortestRemainingSort(batchFileData): current_time = 0 completed = 0 complete = [] n = len(batchFileData) burst = [] for i in range(n): burst.append(batchFileData[i][2]) completion_time = [0] * n prev = 0 is_completed = [0] * n while (completed != n): idx = -1 mn = 10000000 for i in range(n): if(batchFileData[i][1] <= current_time and is_completed[i] == 0): if(burst[i] < mn): mn = burst[i] idx = i if (burst[i] == mn): if(batchFileData[i][1] < batchFileData[idx][1]): mn = burst[i] idx = i if(idx != -1): complete.append(batchFileData[idx]) burst[idx] -= 1 current_time += 1 if(burst[idx] == 0): completion_time[idx] = current_time is_completed[idx] = 1 completed +=1 else: current_time +=1 PID = [] prev = 0; for i in range(len(complete)): if(complete[i][0] != prev): prev = complete[i][0] PID.append(complete[i]) return PID, completion_time def RoundRobinSort(batchFileData): queue = [] current_time = 0 waiting_times = {} completion_t.

Can you fix the errors- It isn't working when I try to run import s.pdf

aksachdevahosymills

Can you give me scientific papers that talk about a comparison between.pdf

aksachdevahosymills

Can someone help me with generating a frequency table please-(C++).pdf

aksachdevahosymills

can you analyze the five graphs and write comments about them Attach r.pdf

aksachdevahosymills

can you answer 1-3 pls 1. Study Power Point for Chapter 18. What gene is mutated in Drosophila (fruit flies) that are missing a heart and die in early embryogenesis? What is the name of the human gene with similar sequence that causes heart defects in infants? 2. For Lou Gehrig disease, what gene is affected? 3. What did we find out about ALS using fruit flies? (describe in detail: the symptoms and the weird reading frames and the little polypeptides that result from the weird reading frames and how they contribute to the disease).

can you answer 1-3 pls 1- Study Power Point for Chapter 18- What gene.pdf

aksachdevahosymills

Can anyone please solve this questions including the details? - Suppose the HTML file references 10 very small pictures (objects) on the same server. Let RTT denote the RTT between the local host and the server containing the each object. Neglecting transmission times, how much time elapses with a. Non-persistent HTTP with no parallel TCP connections? b. Non-persistent HTTP with the browser configured for 5 parallel connections? c. Persistent HTTP? d. Persistent with 5 Parallel connection ?.

Can anyone please solve this questions including the details- -.pdf

aksachdevahosymills

Can I get help please The nonprofit's financial statement that reports amounts as of a particular date (or moment in time) is the finance accounting report. True False Beginning in the year 2018 , the net asset classifications temporarily restricted and permanently restricted have been combined into the following classification: net assets with donor contributions. True False Classifying expenses into program activities and supporting activities is known as the basis. Functional Natural Reporting expenses by categories such as salaries, rent, utilities, etc. is known as the basis. Functional Natural.

Can I get help please The nonprofit's financial statement that report.pdf

aksachdevahosymills

Can someone help me with this- Thank you 1- Compute.pdf

aksachdevahosymills

Can someone help me figure out how to add a drop down menu that will allow me to select certain categories that I wish to view for my ToDoList instead of displaying them on the side like I have atm. Instead I would like to do a label or drop down menu that will has a submit button that will allow me to view specific ToDoList categories that have items undernearth them or all of them together. Below is my index.php file: <?php require_once('database.php'); // Get category ID if (!isset($category_id)) { $category_id = filter_input(INPUT_GET, 'category_id', FILTER_VALIDATE_INT); if ($category_id == NULL || $category_id == FALSE) { $category_id = 1; } } // Get name for selected category $queryCategory = 'SELECT * FROM categories WHERE categoryID = :category_id'; $statement1 = $db->prepare($queryCategory); $statement1->bindValue(':category_id', $category_id); $statement1->execute(); $category = $statement1->fetch(); $category_name = $category['categoryName']; $statement1->closeCursor(); // Get all categories $query = 'SELECT * FROM categories ORDER BY categoryID'; $statement = $db->prepare($query); $statement->execute(); $categories = $statement->fetchAll(); $statement->closeCursor(); // Get products for selected category $queryProducts = 'SELECT * FROM todoitems WHERE categoryID = :category_id ORDER BY ItemNum'; $statement3 = $db->prepare($queryProducts); $statement3->bindValue(':category_id', $category_id); $statement3->execute(); $products = $statement3->fetchAll(); $statement3->closeCursor(); ?> <!DOCTYPE html> <html>  <head> <title>ToDoList</title> <link rel="stylesheet" type="text/css" href="main.css" /> </head>  <body> <header><h1>ToDoList Manager</h1></header> <main> <h1>ToDoList</h1> <aside>  <h2>Categories</h2> <nav> <ul> <?php foreach ($categories as $category) : ?> <li><a href=".?category_id=<?php echo $category['categoryID']; ?>"> <?php echo $category['categoryName']; ?> </a> </li> <?php endforeach; ?> </ul> </nav> </aside> <section>  <h2><?php echo $category_name; ?></h2> <table> <tr> <th>Title</th> <th>Description</th> <th> </th> </tr> <?php foreach ($products as $product) : ?> <tr> <td><?php echo $product['Title']; ?></td> <td><?php echo $product['Description']; ?></td> <td><form action="delete_product.php" method="post"> <input type="hidden" name="itemNum" value="<?php echo $product['ItemNum']; ?>"> <input type="hidden" name="category_id" value="<?php echo $product['categoryID']; ?>"> <input type="submit" value="Delete"> </form></td> </tr> <?php endforeach; ?> </table> <p><a href="add_product_form.php">Add Product</a></p> <p><a href="category_list.php">List Categories</a></p> </section> </main> <footer> <p>© <?php echo date("Y"); ?> ToDoList.</p> </footer> </body> </html>.

Can someone help me figure out how to add a drop down menu that will a.pdf

aksachdevahosymills

Can someone find these answers for Peregrine Falcon The organization (state, tribal government, federal agency) involved. The species involved. Whether the species is managed for commercial or recreational harvest, recovery, nuisance control, or other purpose. A list of the specific management goals or objectives from the plan, as well as specific population targets (e.g., # of animals, sex or age ratios, harvest targets, etc.) associated with these goals. A complete citation and link to the plan..

Can someone find these answers for Peregrine Falcon The organization (.pdf

aksachdevahosymills

can someone help me debug this code? I am not sure why i am getting the errors i am getting. ***SQL Code*** create database Stream; Use Stream; create table Movie( Movie_ID int NOT NULL, MovieTitle varchar(50) NOT NULL, MovieCategory varchar(50), MovieActor varchar(50), MovieRun varchar(250), PRIMARY KEY (Movie_ID), FOREIGN KEY (MovieTitle) REFERENCES Title(MovieTitle) ); Use Stream; create table Shows( Show_ID int NOT NULL, ShowTitle varchar(50) NOT NULL, ShowType varchar(50), ShowCast varchar(50), ShowInfo varchar(250), PRIMARY KEY (Show_ID), FOREIGN KEY (ShowTitle) REFERENCES Name(ShowTitle) ); Use Stream; create table Lists( Watched_Titles int, PlusTitles varchar(50), LikedTitles varchar(50), SeasonalTitles varchar(50), RecommendedTitles varchar(50), PRIMARY KEY (Watched_Titles), FOREIGN KEY (PlusTitles) REFERENCES Added(PlusTitles) ); Use Stream; create table Features( Features_ID int, DownloadOff varchar(50), ConnectivityUse varchar(50) NOT NULL, ConsumerFAQ varchar(50) NOT NULL, PRIMARY KEY (Features_ID), FOREIGN KEY (ConsumerFAQ) REFERENCES FAQ(ConsumerFAQ) ); Use Stream; create table Search( Search_ID int NOT NULL, SearchBox varchar(50) NOT NULL, RelevantTitles varchar(50) NOT NULL, KeywordResult varchar(50) NOT NULL, PRIMARY KEY (Search_ID), FOREIGN KEY (SearchBox) REFERENCES Search(SearchBox) );.

can someone help me debug this code- I am not sure why i am getting th.pdf

aksachdevahosymills

Can someone help me drawing this flowchart? Here is a user flow for the app specification: Parent Registration: Parent fills in a form with necessary information. Parent creates a profile and user login for each child. Content Filtering: Parent can block websites, applications, and devices. Task Management: Parent creates tasks for children. Assigns points for each task. Children accumulate points and exchange for rewards. Activity Monitoring: Parent can view information on device use of their children. Time of use, pages visited, applications used, and tasks carried out. Parent Login: Parent logs into app to access the features described above. Children login: Children can access to view task. Have access to different social media and browser since application. .

Can someone help me drawing this flowchart- Here is a user flow for th.pdf

aksachdevahosymills

Can someone explain the following terms- Genotype Alleles star Alleles.pdf

aksachdevahosymills

can i have a detailed answer - thanks f-) - AD- In a network in which.pdf

aksachdevahosymills

More from aksachdevahosymills (20)