Flues & Chimneys
Our range of flue, chimney and exhaust systems range from 100mm to 1200mm diameter and have been specifically developed to provide an optimum solution for a varying range of commercial and industrial applications.
Common systems include multi-functional fire rated or gas condensing exhausts; flues for use with naturally aspirated gas fired appliances fitted with draught diverters; twin wall insulated, multi-fuel chimney systems; twin wall systems for use with solid fuels; single wall flue systems for gas and oil products and gas and oil venting systems.
All solutions are designed, tested and manufactured to meet the highest standards and maximum performance is ensured by prior measuring using our iCalc software. Our systems conform to the most up to date legislation requirements and our installation teams are experienced personnel, fully aware of all necessary statutory requirements and modern standards.
/:Call Girls In Jaypee Siddharth - 5 Star Hotel New Delhi ➥9990211544 Top Esc...
Case Study for Raich Leisure Centre, Sunderland
1. Project Profile
St Bernard's RC School, Birmingham
Consultant
■ Sunderland Council
Client
■ RM Myers & Co Ltd
Sector Front Entrance
■ Leisure
Products
■ MasterFlue System
Equipment
■ Hamworthy 220/660he
Airtherm Masterflue Hamworthy 220/660he Modumax
Application Airtherm Engineering Limited has recently completed a flue installation,
working closely with the contractor at Raich Leisure Centre, Sunderland.
■ High Efficiency The flue system selected is that used ‘Masterflue’ by Hamworthy Heating.
The flue system installed comprised of a 3m horizontal run and a 7m
vertical, incorporating the necessary drains to allow any unwanted condense
to evacuate the system.
The flue system was installed in December 2012. Our engineers had been
given only ten days to arrange for both a site meeting and to install the
complete flue system, in which to meet our clients program. Not only did we
fulfil our obligation but Airtherm were a massive15% cheaper than the
boiler manufacture’s own preferred company with a ‘like for like basis and
using the exact same Masterflue( MF) product range.
0844 809 2509 | airtherm.co.uk | info@airtherm.co.uk
2. Product Solution
• Boilers: Hanmworthy
• Model: 2 x Modumax 220/660he
• Application: Chimney / Flue system
• Operating mode: Dry / Wet
• Pressure: Positive pressure
• Working pressure: 200 Pa (product will operate 1000pa max)
• Inner wall: 316L1.4404/1.457 thickness ≤ Ø250 0,4 mm, ≥ Ø300 0,5 mm
• Outer wall: AISI 304/ 1.4301 thickness 0,5 / 0,6 mm
• Insulation: 25mm thick Rockwool insulation
• Sealant : tri-lip 'o' type silicone ring
Existing Flue Systems
• Fuel type: Gas
• Other Application METALOTERM MasterFlue
• Condensing boilers
• Atmospheric gas-fired boilers
• Gas blown boilers
• Industrial ovens, large-scale establishments
• Wood-fired stoves
MasterFlue
Contact Details: • Other Advantages METALOTERM MasterFlue
Airtherm Engineering Ltd • No terminal bridges, better heat protection
Ventilation House • High-temperature silicone sealing ring
Pedmore
• Fast-build system without the need of sealants
Stoubridge
• High quality insulation uninterrupted from base plate to top stub
West Midlands
DY9 0DS
Tel: 0844 8092509
Fax: 01562 887312
0844 809 2509 | airtherm.co.uk | info@airtherm.co.uk