6. FFeeaattuurreess
800.348.2686 www.tft.com
BLITZFIRE SERIES
• All lightweight materials, hardcoat
anodized aluminum with TFT-powder coat
finish
• Monitor has flow range up to 500 GPM
• It’s low elevation makes it suitable for
interior attack
• State of the art SAFETY SHUT-OFF
VALVE reacts automatically should the
monitor slide or lift
• The six detent slide valve provides
turbulence-free flow control
7. FFeeaattuurreess
800.348.2686 www.tft.com
BLITZFIRE SERIES
• Low friction 2.5” NH inlet & outlet pivots
are standard
• Elevations of 10 to 50 degrees, 20o left
and right of center
• Simple carbide tipped folding legs provides
for rapid deployment and stability
• Optional Max-Force Dual Pressure
Automatic Nozzle with 175-500 GPM
• Built-in Halo Ring adjust stream to a 120
degree wide fog with flush without shutting
down
C1024 TIP ONLY Dual gallonage nozzle with two flow settings of 10 and 24 GPM @ 100 PSI. All lightweight materials, hardcoat anodized aluminum. This tip only design has a twist “off” position for break-and-extend operations. 3/4" GHT thread is standard.
D1024 TIP ONLY Dual gallonage nozzle with two flow settings of 10 and 24 GPM @ 100 PSI. All lightweight materials, hardcoat anodized aluminum. This tip only design has a twist “off” position for break-and-extend operations. 1" NH thread is standard.DS1024 Dual gallonage nozzle with two flow settings of 10 and 24 GPM @ 100 PSI. All lightweight materials, hardcoat anodized aluminum. Quick-change rear valve seat, stainless steel shut-off ball and a twist “off” position for positive shut off. 1" NH swivel is standard.DS1024P Dual gallonage nozzle with two flow settings of 10 and 24 GPM @ 100 PSI. All lightweight materials, hardcoat anodized aluminum. Quick-change rear valve seat, stainless steel shut-off ball and a twist “off” position for positive shut off. Pistol grip is mounted below the valve 1" NH swivel is standardD1040 TIP ONLY Dual gallonage nozzle with two flow settings of 10 and 40 GPM @ 100 PSI. All lightweight materials, hardcoat anodized aluminum. This tip only design has a twist “off” position for break-and-extend operations. 3/4" GHT thread is standard.DS1040 Dual gallonage nozzle with two flow settings of 10 and 40 GPM @ 100 PSI. All lightweight materials, hardcoat anodized aluminum. Quick-change rear valve seat, stainless steel shut-off ball and a twist “off” position for positive shut off. 1" NH swivel is standard.DS1040P Dual gallonage nozzle with two flow settings of 10 and 40 GPM @ 100 PSI. All lightweight materials, hardcoat anodized aluminum. Quick-change rear valve seat, stainless steel shut-off ball and a twist “off” position for positive shut off. Pistol grip is mounted below the valve 1" NH swivel is standard