End-of-line Tester (EOL) systems can measure and check the functionality of automotive electronic control units, mechanical parts and related systems. Key factors considered are high test quantity, test completion and low system with upgrade costs.
Theta Measurement and Control Solutions Pvt Ltd (TMCS) mainly provides cost effective Industrial Automation, Test, Measurement & Control solutions.
1. TMCS - END-OF-LINE TESTER SERVICES
End-of-line Tester (EOL) systems can measure and check the functionality of
automotive electronic control units, mechanical parts and related systems. Key
factors considered are high test quantity, test completion and low system with
upgrade costs. Today it’s important to have a flexible test platform with the
growing intricacy of automotive electronics. TMCS has an End of Line Testing
platform which is flexible and offers complete consistency.
End of line system allows error free, faster, accurate and a thorough testing of any
type of UUTs.
EOL Testing Services can be used for:
Motor Test System:
The control panels have the following functions:
– EOL testers are developed to control and log data of Motor under test.
– Various tests like Voltage regulation, Temperature rise test etc can be carried
out automatically.
– Pass and Fail result will be displayed based on configured data.
2. Alternator Test System:
With identifying and selecting the apt NI resources, we were able to finish the
entire test 12 to 14 minutes earlier, reducing alternator’s Test Cycle Time by
10+%” The Challenge: Customer wanted us to develop a solution over the
Alternator (End of line) Testing System that shall CONTINUOUSLY MONITOR the
temperature rise, during the heat-run test.
ECU Test Bench:
EOL testing is usually used to test vehicle ECU. Operator needs to manually
connect all electrical cables, select model and start testing. Test sequence of
different models of ECU can be set by manager.
Outer Door Handle EOL Testing:
Test bench is used to simulated different door handle actions done by a driver to
lock or unlock the car.
Spring Tester:
EOL tester is used for calculating compression and tension values for different
sized springs. EOL Tester to Test Signaling Group Relays: The sequence of testing
the particular UUT (Group) is defined in form of a excel table.