1. Stitch Overseas Private Limited
Company Profile – Die and Mold Division
Stitch
Sourcing Technology Globally

2. Partners – Molds & Dies
Steady Stream Business Company Limited
 Pioneer in Plastic Injection Mold manufacturing, Taiwan
Since 1987. www.steady-stream.com
Sandhar Tooling Private Limited
 Equity holding company. Manufacturers of High Pressure
and Low Pressure Aluminum die casting dies, Manesar
India since 1985. www.sldl.com

3. Partners – Press Dies
Endwell Enterprise Company Limited
 An Expert Manufacturer of Progressive Dies, Compound Dies, Fine
Blanking Dies, Draw Dies and Hand Transfer Dies Since 1976.
www.endwell.com.tw
Shin Young Co. Limited
 Pioneer in Automotive Skin Panel, High Tensile & Hot Forming Die
Manufacturing, from Korea since 1996. www.shym.co.kr
COC Tooling & Stamping Co. Limited
 Pioneer in Automotive Skin Panel Die Manufacturing. Previously
Ogihara, Taiwan since 1990. www.twcoc.com.tw
KianShen Corporation
 Pioneer in Frame and Chassis Die Manufacturing and Stamping,
from Taiwan since 1955. www.kianshen.com.tw

4. Partner – Prototype
ZYBODY CO. LTD.
 Pioneer in Proto Parts and Proto Assemblies for A Class (Skin
Panels), B Class (BIW underbody parts), High Strength Steel Parts
(up to 590Mpa), Ultra High Strength Steel Parts (up to 980Mpa) and
Hot Forming Parts (above 980Mpa) for Automotive application.
 Have ability to make complete BIW assembly.
www.zybody.net

5. Activity Profile-1(Progressive Dies)
 We have executed many Turnkey Projects for Supply of Press
Tools and High Speed Presses to companies like Havells Group
and for the requirements of ABB at Haridwar. This is besides
Progressive Tools being supplied to other companies viz. JBM,
Neel Metal, Cosmo, Sigma and Larsen & Turbo Limited, Caparo,
Schneider etc.
 We has the capability to offer solutions for different
materials like Stamping Dies for Carbon Steel- Cold & Hot
Rolled Steels, High Strength Low Alloy (HSLA) Steels, Dual
Phase Steels, Ultra High Strength Steels, Stainless Steels,
Copper, Brass, Beryllium Copper in sheet thickness ranging
from 0.015 mm to 12 mm, Die Casting Dies for Aluminum,
Magnesium, Zinc and Molds for a wide range of Plastics etc.

6. Progressive Die: Reference Component
 Outer Metal (3.2mm Thick, SAPH 440)
Deep Draw Progressive Die with 12 station
Die Size:- 2200 x 600 x 550mm
Press Tonnage:- 315 Ton
Ø45.4 +/- 0.2 Draw Height 40mm
Ø 111.38 +/- 0.2mm

7.  Deep Draw Parts  Precision Parts
 Hand Phone Covers  Automotive Parts
Progressive Die: Reference Component

8. Activity Profile – 2 (Stamping Dies)
 Stitch formed an alliance with M/s COC Tooling & Stamping Co.
Limited, Taiwan in 2006 for Automotive Class A & B and High
Tensile Panel Dies.
 Executed Projects of Back Door Dies for Maruti Zen Estilo, Ritz,
Wagon R, Swift Hatch Back & Notch Back, Alto Minor with
Semiautomatic Welding Jig, Ciaz and Roof & Body Side frame
for Fiat Linea & Punto, Mahindra LCV & MPV Models A Class & B
Class(High Tensile) Body panels & Ashok Leyland New Cab.
 Projects under execution for Maruti Upcoming New Model,
Mahindra Upcoming New Model for B Class High Tensile Panels
and Body panels for Ashok Leyland New Cab
 Executed Dies for B Class High Tensile parts with tensile
strength up to 590 MPa of thickness 1 mm to 2.3 mm.

9. Activity Profile – 3 (Stamping Dies)
 Stitch formed an alliance with M/s Shin Young Co. Limited,
Korea in 2012 for Automotive Class A & B, High Tensile, Ultra
High Tensile and Hot Forming Panel Dies.
 Executed Projects of High Tensile panel dies for Maruti Ciaz, Alto
K10.
 Projects under execution for Maruti Upcoming New Model.
Mahindra Model S101 A Class (Side Body Outer) & B Class (High
Tensile) ,B515 and B562 Side Body Panels for Ford India.
 Executed Dies for B Class High Tensile parts in India with tensile
strength up to 780 MPa of thickness 1 mm to 2.3 mm.

10. Reference Parts: Passenger Cars
Front Fender Body Side ( Rear Quarter)
Hood Assembly Sun Roof Assembly Front Door Assembly Rear Door Assembly
Front Floor Assembly Rear Floor Assembly
Deck Lid Assembly Tail Gate Assembly

11. Activity Profile – 4 (Stamping Dies)
 Stitch formed an alliance with M/s Kian Shen Corporation,
Taiwan in 2014 for Heavy Commercial Vehicles.
 Projects under execution for Daimler India Commercial Vehicle,
Chassis/Frame parts of strength 590 MPa of thickness 6.0 mm
with 3.5 meter length, 10mm thickness with 3.0 meter length and
12.0 mm thickness with 1.0 meter length in Upcoming Model.

12. Reference Parts: Commercial Vehicles
FRONT C/MBR FRONT C/MBR
FRAME
LOWER ARM

13. Business Content
1. Design and Manufacturing of:
 Stamping Die
 Checking Fixture
 Assembly Fixture
 Prototype Parts
 Prototype Assemblies
For BIW & Skin Parts
2. Design and Manufacturing of:
 Stamping Die
 Checking Fixture
 Assembly Fixture
For Chassis & Frame Parts
3. Turn Key Management.

14. Activity Profile – 5 (Prototype)
 Stitch formed an alliance with M/s Zybody Co. Ltd., China in 2015
for all kind of Prototype Parts and assemblies for Automotive
Applications.

15. Reference Parts: Prototype

16. Reference Parts: Prototype

17. Industry Served
 Automotive Industry
 Switchgear Industry
 HCV & LCV Industry
 General Engineering Industry
 White Goods Industry
 Yellow Goods Industry

18. Indian Customers
 Maruti Suzuki India Limited
 Mahindra & Mahindra Limited
 Fiat India Limited
 Ashok Leyland Limited
 Daimler India Commercial Vehicles
 Gestamp Automotive India Private Limited
 TVS Motor Company Limited
 Belsonica India Private Limited
 Caparo Engineering Limited
 Jay Bharat Maruti Limited
 Omax Autos Limited
 Neel Metal Products Limited
 Havells Group
 Schneider Electric India Private Limited
 Control & Switch Gear Private Limited etc..

19. Stitch Advantage !
 Well Recognized in the Indian Automotive, Engineering and their
Ancillary Industries.
 Well Experienced in working with International companies.
 Strong relationship with Existing customers.
 High reliability to meet the delivery as per allocated schedules.
 Experience of serving a diverse portfolio of Industries, thus catering
to a wide customer base.
 Always open to new possibilities to backward/forward integration.

20. Contact Details
 Further any Assistance/Information related to any query
Please Contact
Lovkesh Ashwin Dilish
+91 - 9311361206 +91 - 9311361207
Projects@stitchtools.com Stamping@stitchtools.com

21. Thank You!!