This document summarizes an office shredder model, the Kobra 260 TS C4, manufactured by ELCOMAN S.R.L. It can shred up to 24 sheets of paper at once as well as CDs, DVDs, and credit cards. It features a touch screen panel, energy saving modes, automatic reverse and oiling systems, separate bins, and optional metal detection. The shredder produces cross cut shredded materials into 3.9 x 40 mm pieces.
1. Cross Cut Shredders Manufacturer: ELCOMAN S.R.L.
Brand: KOBRA
“Touch Screen” ENERGY Model: KOBRA 260 TS C4
SMART Office shredder Article code:
Kobra 260 TS C4: 99.815E/S
Kobra 260 TS C4 + Automatic Oiler 99.815E/S +58469
Kobra 260 TS C4 + Metal detector 99.815E/S +58479
Kobra 260 TS C4 + Metal detector + Automatic Oiler 99.815E/S +58489
KOBRA 260 TS C4
Throat width: 260 mm
Security level: 3
Shred size: 3,9 x40 mm. cross cut
Sheet capacity (A4/70 gr. paper)*: 22/24
Credit cards: yes
CD-Rom: yes
“ENERGY SMART” system: yes
Speed: 0,07 m./sec.
Noise level (idle/shredding): 54/55 dba
Voltage: 230 Volt
Power: 460 Watt
Waste bag volume: 60 liters
Dimensions (WxDxH): 40x36x80 cm.
Weight: 31 Kg.
Cross-cut “Touch Screen” Office shredder
• Shreds up to 24 sheets of paper (A4 70 gr.) at a time (cross cut rated capacity with lubricated cutting knives),
CDs, DVDs, credit cards
• Touch Screen Panel
• “EPC - Electronic Power Control“ System: shows the shredding load required to optimise shredding without jams
• “ENERGY SMART®” power saving system: machine goes into power saving stand-by mode after just 8
seconds and switches off automatically after 4 hours of non-operation
• “AUTOMATIC REVERSE” System in case of jamming
• 24 hour continuous duty motors: no duty cycle or timed cool down periods
• Heavy duty chain drive with steel gears “SUPER POTENTIAL POWER UNIT”
• Carbon hardened cutting knives unaffected by staples and metal clips
• New high precision design of cutting knives allows high shred loads with low power consumption
• 2 separate sets of cutting blades: one for paper and one for CDs, DVDs and credit cards
• 2 distinct integrated removable bins for separating shredded paper from plastic shreds
• “AUTOMATIC OILING SYSTEM”: automatically lubricates cutting knives (optional)
• “SHRED GUARD”– Metal Detection System: detects any type of metal which can be introduced into the
shredder and stops immediately the machine preventing any possible damage to the cutting system; an
illuminated optical indicator warns the operator of the presence of the metal (optional)
Touch Screen Panel Two separate sets of cutting knives “SHRED GUARD” - Metal Detection System
Just touch the controls to activate the machine Two entry openings and two sets of cutting knives Warns when metal objects of any size are
functions. Keep your finger on the “Forward” for the separate insertion and shredding of paper, accidentally inserted into the entry opening and
control for 5 seconds and the machine functions Cds, DVDs, and credit cards and separation stops the machine before they reach the cutting
continuously for 30 seconds when transparent of shredded material into two bins. knives in order to protect the knives (optional).
material needs to be shredded. A light comes on “AUTOMATIC OILER”
when the blades need to be oiled. Built-in Automatic Oiling system. Eliminates the
need for manual oiling of cutting knives (optional).
* Capacity may vary on power supply, paper quality and lubrication of cutting knives MADE IN ITALY