1. Cross Cut Shredders Manufacturer: ELCOMAN S.R.L.
Brand: KOBRA
“Touch Screen” ENERGY Model: KOBRA 260 TS HS-6
Article code:
SMART High Security shredder Kobra 260 TS HS-6: 99.825E/S
Kobra 260 TS HS-6 + Automatic Oiler 99.825E/S +58471
Kobra 260 TS HS-6 + Metal detector 99.825E/S +58481
Kobra 260 TS HS-6 + Metal detector + Automatic Oiler 99.825E/S +58491
KOBRA 260 TS HS-6
Security level: 6
Throat width: 260 mm
Shred size: 0,8 x5 mm. cross cut
Sheet capacity (A4/70 gr. paper)*: 4/5
“ENERGY SMART” system: yes
Speed: 0,08 m./sec.
Noise level (idle/shredding): 54/55 dba
Voltage: 230 Volt
Power: 460 Watt
Waste bag volume: 60 liters
Dimensions (WxDxH): 40x36x80 cm.
Weight: 32 Kg.
High security “Touch Screen” Office shredder
Suitable to shred “Classified” and “Top secret” documents
Shreds up to 5 sheets of paper (A4 70 gr.) at a time (cross cut rated capacity with lubricated cutting
knives) Touch Screen Panel
“EPC - Electronic Power Control“ System: shows the shredding load required to optimise shredding without jams
“ENERGY SMART®” power saving system: machine goes into power saving stand-by mode after just 8 seconds
and switches off automatically after 4 hours of non-operation
“AUTOMATIC REVERSE” System in case of jamming
24 hour continuous duty motors: no duty cycle or timed cool down periods
Heavy duty chain drive with steel gears “SUPER POTENTIAL POWER
UNIT” Carbon hardened cutting knives unaffected by staples and metal clips
New high precision design of cutting knives allows high shred loads with low power consumption
“AUTOMATIC OILING SYSTEM”: automatically lubricates cutting knives (optional)
“SHRED GUARD”– Metal Detection System: detects any type of metal which can be introduced into the
shredder and stops immediately the machine preventing any possible damage to the cutting system; an
illuminated optical indicator warns the operator of the presence of the metal (optional)
Touch Screen Panel “AUTOMATIC REVERSE” System “SHRED GUARD” - Metal Detection System
Just touch the controls to activate the machine Special system which detects the thickness of the Warns when metal objects of any size are accidentally
functions. Keep your finger on the “Forward” paper entering the shredder and automatically inserted into the entry opening and stops the
control for 5 seconds and the machine functions rejects the excess material. machine before they reach the cutting knives in
continuously for 30 seconds when transparent order to protect the knives (optional).
material needs to be shredded. A light comes on “AUTOMATIC OILER”
when the blades need to be oiled. Built-in Automatic Oiling system. Eliminates the need
for manual oiling of cutting knives.
* Capacity may vary on power supply, paper quality and lubrication of cutting knives MADE IN ITALY