Korean AM Industry and Market Report

William Joo
The chairman of KAMUG
http://cafe.naver.com/3dprinters
jshkoret@naver.com
KAMUG Not for the commercial purpose

한국3D프린터유저그룹/윌리암왕선생님카페The KAMUG meeting & Conference in Ulsan

한국3D프린터유저그룹/윌리암왕선생님카페
Korean Market
Market size
2015 223 Billion Kwon(2.23B US$)
2016 274 Billion Kwon(estimated)
2015 151.6 Billion Kwon ( Product )
2015 71.4 Billion Kwon ( Service )

Joo’s Metal AM Roadmap(Korea)
 Present (MAM 1.0) : Just start mass production for Sand casting and medical parts, no aerospace parts
 Medical & dental process technology(KFDA approved) / sand casting, investment casting,
 conformal cooling molding process technology / Jewerlry process is fully developed
 Korean AM Machine Company : Winforsys(Multilaser,Hybrid,Molding), Daegun Tech(metal), ,Wonkwang Hitech & Instek(Medical national project),
 Conception(metal), Korean 3D printing Institute(metal developing consulting)
 Materials : Developed but only the institutional level
 Ti medical powder process developed(KITECH in Arcam)/Stainless steel powder (Changsung)
 Service Provider Medisay & Kitech (Medical Implant),Dlabs(Dental),RPCAST(Investment casting),Sandgrphy(Sand printing),
 Partners Lab(EOS Metal & Polymer), GEMAce(Jewerly)
 Process monitoring: Enervision(Sigma Lab’s distributer) ,Winforsys(Developing in Korea)
 Simulation : Enervision( 3DSim’s Distributer )
 Training : UL (by KAMUG)
 Low cost machine installed : Orlaser(10,000 Euro, 3 machine installed),Farsoon( 2 machine installed)

 Near Future (MAM 2.0): Mass production for other industries such as heavy industries and automobiles
 High speed Intergrated System ( Automatic Powder handling & Postprocessing )
 - Additive Industries (Heat treatment system included)
 Large Size machine: Ship building & Power Plant industries for Screw & Ship body
AMC Center is planed : Ship building AMC(Ulsan) & Medical AMC(Daegu)
 Low cost compatible machine under US$ 350K-250K :
 250x250mm German machine compatible,widely spread worldwide

 Future(MAM 3.0): Saturation to the small companies and underdeveloping countries
 Process Automation
 Multi,Gradient materials/Desktop metal( 100 times faster )
 M&A - Large companies appears : Like IBM MS,HP
 The collaboration with logistics companies integrates the distributed manufacturing platform
 for supply chain and Internet of Things with the additive manufacturing and logistics network.(Magics,SAP,UPS)

This is KAMUG by William Joo. jshkoret@naver.com

 Korean AM Machine Company :
Winforsys(Multilaser,Hybrid,Molding), Daegun Tech(metal),
Wonkwang Hitech & Instek(Medical national project),
Conception(metal), QubeTech,Cham System
Korean 3D printing Institute(metal developing consulting)

 Machine Developed
 2-3 machines installed in University and Institution
 Process is developing
 Machine developing technology is common.
 Korean government:
 Mass production, distribution is needed by financial programs.
Korean Metal AM Machine

 EOS : the branch in Seoul
 Concept Laser : KAMI
 SLM : Future Technolgy
 Realizer: AM Korea
 Orlaser : Conception & Daeho system
 Trumpf : Trumpf
 Farsoon: Future Technology
Distributers

Metal Printer developing technology is common.
KISTI & KAMUG’s Metal printer developing Consortium training

Korean Metal 3D printer

Winforsys Metal 3D Printer KAMUG

Windorsys Metal 3D Printer KAMUG

Winforsys Hybrid metal 3D printer
Milling tools and build plate in the chamber

DaegunTech Metal 3D Printer KAMUG

 Korean Medical AM :
Medisay, Kitech Kangwon,
Yonsei Univeristy Hospital
Korentech
 Process Developed
 More than 200 Operation (KFDA approved)
 Mass production, machine distribution is needed
 by financial programs.
Korean Medical AM

Korean Medical 3D printing KAMUG
Fully developed: Medisay, Kitech Kangwon

 Service Provider :
 RPCAST(Investment casting),Sandgrphy(Sand printing),
 Partners Lab(EOS Metal & Polymer)
 Molding & Conformal cooling, Hybrid type machine
 Molding & Conformal cooling Process is developed.
 Mass Production
 Hybride machine is developing by Winforsys

 Mass production, machine distribution is needed
 by financial programs.

Sand casting & Molding

Korean Casting AM Company
Sandgraphy & RPCast KAMUG
Sandgraphy in Korea
3D 프린팅으로 제작한 주물 제품
RPCast (Investment casting)

Conformal Cooling molding & tire molding
Winforsys & Cubetech
17

Mold is developed
by Korean metal 3D printer, Winforsys

Silicone mold by Materialise
The process is developed in Korea

 Ship building /Power plant/ Heavy Industry
 PBF production process for ship building industries
 is developing.
 Large Size machine
 Large size metal & polymer part : Screws, Ship body
 SCR catalyst production
New target

SCR Catalyst
SCR catalyst process by Kitech in Korean

in
21%of domesticproduction
in manufacturing
in manufacturing

 KAMUG is the Korean Additive Manufacturing User
Group supported by Ulsan city.
 KAMUG supports to promote the AM company to
release at Korea such as Orlaser & Korean company.
 KAMUG held the international exhibition and
conference in Korea.
 KAMUG open the training courses & technical seminar.
KAMUG

Orlaser Prduct Release with KAMUG

KAMUG World Expo & Conference
DFAM Challenge with Ulsan City
We are proud to announce the 2017 International 3D Printing Conference will be held in
Ulsan, Korea, during September 13-14, 2017. As a key manufacturing technology for the 4th
industrial revolution, additive manufacturing (AM) has been spotlighted and new business
opportunities associated with AM has been introduced in a variety of industries. In order to
promote the AM business and its successful use cases, UNIST, UIPA and K-AMUG are co-
hosting the international conferences with the world renowned speakers, capable users, and
AM solution providers.
Ulsan, the industrial capital of Korea, is emerging as the center of Korea’s additive
manufacturing technology. Based on the major industries including automotive, shipbuilding,
and petrochemical sectors of Korean economy, the applications of additive manufacturing
and new business opportunities are expected. The conference event will be a milestone in AM
society to get the researchers, engineers, and industries connected toward the new value
creation. The organizing committee truly welcomes you to Ulsan for this meaningful
gathering in this fall.

 The chairman of KAMUG
 Professor of Hanyang University
 Metal printer developer
 Contact : jshkoret@naver.com
Author : William Joo

Introducing William Joo
William SH Joo
- The Chairman of KAMUG
- Professor at Hanyang University
- ex Professor at Pusan National
University
- ex CTO of Sentrol Co., Ltd.
- Graduated Seoul National
University

The Chairman of K-AMUG
Korean Additive Mnufacturing User Group
The KAMUG meeting & Conference in Ulsan

K-AMUG : Korean AM User Group
More than 15,000 people

The member of Expert Committee of Shanghai
Additive Manufacturing Association

Metal & ME printer developed earlier

KBS 9시 News
Korean Economic Daily Weekly Chosun Electroncs News Daily
SBS 8시 News
Press release of
Korean TV/Newspaper
EBS 50 minutes

Press release of
Korean TV/Newspaper
Electroncs News Daily Electroncs News Daily Korean Economic Daily
Kyungsang News Electroncs News Daily Electroncs News Daily

The press release of
Korean TV/Newspaper
7/12/2017
This is KAMUG by William Wang.
jshkoret@naver.com 35

Korean TV/Newspaper
7/12/2017

Press release of
Korean TV/Newspaper
Chunji News Daily Materials News Daily

Press release of
Korean TV/Newspaper

Press release of
Korean TV/Newspaper
Cad & Graphics 3D Printing Magazine

Press Release of Magazine
7/12/2017

The member of the committee for the Roadmap.
The technical director of the 3D printing and art.
7/12/2017

Metal Printing training

The author of Korean 3D printing book
7/12/2017

Korean AM Industry and Market Report

Recommended

Recommended

More Related Content

Similar to Korean AM Industry and Market Report

Similar to Korean AM Industry and Market Report (20)

Recently uploaded

Recently uploaded (20)

Korean AM Industry and Market Report