Salumco is a leading manufacturer of architectural aluminum systems and products for the construction industry based in Riyadh, Saudi Arabia. It has over 650 employees across multiple factories and offices. Salumco offers a complete range of aluminum curtain walls, doors, windows, and other systems that have been applied in 90% of its major projects over 40 years. The company aims to maintain high quality standards and compliance with international certification requirements.
4. Salumco is a leading manufacturer and applicator of architectural aluminum systems and products, for the
construction industry.construction industry.
Salumco’s success and continuous growth is based on a unique combination of professional managerial
strategy, experienced human resources, high technology, and comprehensive network of production plants and
equipment.q p
Salumco is always ready for future challenges, as our responsibility and commitment towards our clients are
proportional to their needs and expectations on all levels. Our strategy of ongoing improvement, offers the
market a wide range of outstanding solutions in terms of high tech engineering, safe environment, and
professional site management. As we reinforce and increase our capabilities, we make sure to maintain the
highest standards of quality, innovation and reliability.
Salumco financial stability and powerful resources, provide us high flexibility to achieve our targets and
maintain our values. This financial stability is due to Salumco’s network of powerful and professional clients,
whom their ongoing success & improvement is our success.
Salumco’s management and our devoted exceptional staff, participated in developing SALUMCO Aluminum
S h h 40 f f i d d i W d id li lSystems through 40 years of profession and deep experience. We are proud, to provide our clients a complete,
approved and tested range of Salumco Aluminum systems of curtain walls, hinged and sliding doors and
windows. Salumco Aluminum Systems were applied and successfully tested in 90% of our major projects along
the years, still standing to witness our history and predict our future, proving our compliance with the
i t ti l t d dinternational standards.
4
6. Company Name: The Saudi Aluminum Industries Company
Commercial Register no.: 1010006506
Address: Riyadh Old Industrial AreaAddress: Riyadh – Old Industrial Area
Phone no.: +966 1 4484322 +966 1 4484388
Fax. no.: +966 1 4467523
E‐mail: salumco@salumco.com@
Chairman: Mr. Rafic El Hage Moussa
E‐mail: salumco@salumco.com
M i Di t M Eli El HManaging Director: Mr. Elie El Hage
E‐mail: Elie@salumco.com
Other Contact no.: Business Development Manager – Mr. Krishna Shetty
E‐mail: salumco@salumco.comE mail: salumco@salumco.com
Mobile no.: +966 50 3237485
Total Number of Employees: 650
Banks: SAMBA – SABB – Riyadh Bank – Saudi Holland Bank – Al Rajhi Bank
Insurance Co.: Bupa ‐ Sanad
Law Firm: Al Jarbouaa Office
Auditing Firm: Osama Ali Tabbara & PartnersAuditing Firm: Osama Ali Tabbara & Partners
Head Office: 4,500 m2 (1500 m2/floor)
Factories and Warehouse: Industrial Area (3,500m2) – Aziziya Factory (4,850m2) – Sulai Factory (2,100m2)
Al Kharj Factory (4,000m2) – Al Kharj Warehouse (6,000m2) – Glass Factory (4,500m2)
6
10. Company Name: The Saudi Aluminum Industries Company
Commercial Register no.: 4030057963 ‐ Branch
dd dd h ldAddress: Jeddah – 60 Street – 60 Building
Phone no.: +966 2 6571818 +966 2 6533456
Fax. no.: +966 2 6517468
E‐mail: salumco jdh@salumco comE mail: salumco_jdh@salumco.com
Chairman: Mr. Rafic El Hage Moussa
E‐mail: salumco@salumco.com
Managing Director: Mr. Elie El Hage
E‐mail: Elie@salumco.com
Branch Manager: Mr. Badih Jaroudi
E‐mail: salumco jdh@salumco comE‐mail: salumco_jdh@salumco.com
Mobile no.: +966 50 4243046
Total Number of Employees: 130
Banks: SAMBA – SABB – Riyadh Bank – Saudi Holland Bank – Al Rajhi Bank
Insurance Co.: Bupa ‐ Sanad
Law Firm: Al Jarbouaa Office
Auditing Firm: Osama Ali Tabbara & PartnersAuditing Firm: Osama Ali Tabbara & Partners
Branch Office: 260 m2 (130 m2/floor)
10
39. KING FAHD MEDICAL CITY
TOWERS 1, 2, 3, 4, & Health ClubTOWERS 1, 2, 3, 4, & Health Club
Main Contractor :
AL Rashid Trading & Contracting
System Used:
GUTMANN CW & TB Windows & Doors
39
40. BORDER SECURITY HOUSING – KSA
HAFR AL BATIN – TURAIF – RAFHA – ARARHAFR AL BATIN TURAIF RAFHA ARAR
EWAIQELA AREAS.
Main Contractor : Rashid Trading & Contracting
Consultant: Khatib & Alami
System Used Salumco RM 120x3mm Sliding.
40
43. SAUDI INVESTMENT BANK ‐ KSA
32 Branches in the Kingdom32 Branches in the Kingdom
Main Contractor : C.C.E
System Used: Salumco SG‐60 Series
Curtain WallCurtain Wall
43
52. KING ABDULAZIZ CITY
FOR SCIENCE & TECHNOLOGYFOR SCIENCE & TECHNOLOGY
RIYADH
Main Contractor : First Saudi Cont.
System Used : Salumco SG‐55 S
Structural Glazing CW
52
122. SALUMCO’s scope of work in a certain project will be carried out as follows:
Wh th i d t t d t i h d d t th O ti D t t S l ill i i d P j t MWhen the signed contract document is handed over to the Operations Department, Salumco will assign an experienced Project Manager,
who is familiar with similar projects, and has the adequate management skills to manage the works according to the following:
1. Preparation & Engineering Works:
The major engineering works such as shop drawings, typical details, structural calculations, material submittals, material index list and
f b i i d i ill b d b h i l d S l hi h d d d h i i lfabrication drawings will be prepared by our technical department, as per Salumco high standards, and as per the international system
providers recommendation for international systems (Schuco, Technal & Alu K).
1.1 Shop Drawings: The first step of preparation works is to check the tender drawings for any modifications and issue the concept designs
architectural drawings and the related aluminum schedule, showing the elevation, vertical section, horizontal section, location &
specifications of each item In parallel and with close coordination with the project manager meeting might be arranged with mainspecifications of each item. In parallel, and with close coordination with the project manager, meeting might be arranged with main
contractor and consultant to discuss the project details and requirements. Accordingly, shop drawings and section details are prepared
for each particular item of the scope. The issued drawings are checked by the team leader, the technical manager and the project
manager, then submitted for approval. Submittals are prepared as per Salumco procedures and forms to maintain proper filing and
record. After finalizing the modifications process as per the consultant’s requirements, a full set of drawings is issued for construction,
and several copies are distributed as per the project conditions.and several copies are distributed as per the project conditions.
1.2 Material Index List: Material index list is prepared after receiving the consultant’s comments and/or approvals on the submitted shop
drawings. The material index list includes all material references and quantities, such as aluminum profiles, gaskets, accessories ,
sealants…. As well as the draft glass list which will be followed by the exact cutting sizes after checking the as built sizes on site.
1.3 Material Submittal: Samples and data sheets for all the used aluminum systems and the related glass and accessories are submitted for
approval. Submittals are prepared as per Salumco procedures and forms to maintain proper filing and record.
1.4 Execution Schedule: Execution schedule is prepared in coordination with the main contractor, and submitted to the consultant for
approval.
122