SENSOR MINI

1. BOS 5K-PS-RH12-S75
BOS012A
Internet www.balluff.com For definitions of terms, see main catalog eCl@ss 9.1: 27-27-09-04
Balluff Germany +49 (0) 7158 173-0, 173-370 Subject to change without notice ETIM 6.0: EC001822
Balluff USA 1-800-543-8390 BOS012A_09-03-17_18:53
Balluff China +86 (0) 21-50 644131
1(2)
Display/Operation
Adjuster Potentiometer 6-turn (1x)
Setting Rated switching distance (Sn)
Electrical connection
Connection M8x1-Connector, 4-pole
Polarity reversal protected yes
Short-circuit protection yes
Electrical data
MTTF (40 °C) 21 a
No-load current Io max. at Ue 30 mA
Operating voltage Ub 10…30 VDC
Rated operating current Ie DC 100 mA
Rated operating voltage Ue DC 24 V
Ready delay tv max. 100 ms
Switching frequency 500 Hz
Turn-off delay toff max. 1 ms
Turn-on delay ton max. 1 ms
Voltage drop Ud max. at Ie 2 V
Environmental conditions
Ambient temperature -25…55 °C
Protection type IEC 60529 IP67
Functional safety
Diagnostic coverage 0 %
Functional safety no
Mission Time 10 a
General data
Approval/Conformity cULus
CE
Basic standard IEC 60947-5-2
Series 5K
Style Square
Connection 90°
Trademark Global
Material
Housing material PC
PBT
1) Optical axis receiver 2) Optical axis emitter 3) Sn 4) Output function

2. BOS 5K-PS-RH12-S75
BOS012A
Internet www.balluff.com For definitions of terms, see main catalog eCl@ss 9.1: 27-27-09-04
Balluff Germany +49 (0) 7158 173-0, 173-370 Subject to change without notice ETIM 6.0: EC001822
Balluff USA 1-800-543-8390 BOS012A_09-03-17_18:53
Balluff China +86 (0) 21-50 644131
2(2)
Material sensing surface PMMA
Mechanical data
Dimension 10.8 x 43.2 x 19.5 mm
Fastening detail Screw M3
Optical data
Ambient light max. 5000 Lux
Light type LED Red light
Special optical feature Background suppression
Wave length 660 nm
Output/Interface
Switching output PNP Normally open (NO)
Range/Distance
Measuring range 20…200 mm
Range 20…200 mm
Rated operating distance Sn 200 mm, Adjustable
Ripple max. (% of Ue) 10 %
Remarks
Order accessories separately.
For additional information, refer to user's guide.
Only for applications per NFPA 79 (machines with a supply voltage of
maximum 600 V). Use an R/C (CYJV2) cable with suitable properties for
attaching the device.
Reference object (target): gray card, 100 x 100 90 % remission, axial
approach.
The sensor is functional again after the overload has been eliminated.
For further information on MTTF/B10d, please refer to the MTTF / B10d Certifi­
cate.
Specification of the MTTF value and the B10d value do not represent any bin­
ding quality and/or life expectancy guarantees.
Connector view
Wiring Diagram
Symbols for Optoelectronic Sensors