The document provides technical specifications for an incremental rotary encoder model DG 118. It lists details such as the encoder can measure up to 5400 lines per revolution, has integrated times 5 or times 10 subdividing electronics as an option, and mechanical specifications for dimensions, housing material, shaft material and load limits. It also details the encoder's operating temperature range, sealing level, EMC compliance, electrical specifications for supply voltage, power consumption, output signals and sampling rates.

1. Date10/2012,Technicaladjustmentsinreserve!
A-5121 Tarsdorf  +43 (0)6278 / 8192-0  +43 (0)6278 / 8192-79  e-mail: info@rsf.at  internet: www.rsf.at
INCREMENTAL ROTARY ENCODER DG 118
Lines: up to 5400 / revolution
Optional: integrated times 5 or times 10 Subdividing Electronics
Mechanical Data:
Dimensions: Height max. 55 mm
Shaft length 10 mm (ø6 mm)
Diameter 58 mm
Housing: Aluminum
Shaft: Stainless steel
Shaft load: Axial 10 N
Radial 20 N
Max. rotational speed: 12.000 Rpm
Operating temperature: 0 °C to +80 °C
Sealing: IP 65 acc. to EN 60529
EMC 2004/108/EG: acc. to DIN EN 61000-6-2: 2006
Electrical Data:
Supply: 5 V ±5% or
10 to 30 V
Power consumption: 60 to 200 mA
Reference mark: 1 per revolution
Output: - Square-wave signals
- Square-wave signals via Line Driver
(RS 422 Standard)
Sampling rate: 300 kHz at square-wave signal 5 V
160 kHz at square-wave signal 10 to 30 V
Output current: max. 20 mA
Cable: 1 m cable without connector
Dimensions:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By: