SGTMCDOULETTpdf

Date Printed:
Report version 3.5.1 30Oct14
11-Feb-16
Marine Training Jacket
Report generated by: ALEXANDERM02

Report:
Date Printed:
Page 2 of 300
11-Feb-16
MCDOULETT, RICKEY D SGT
For Official Use Only - Privacy Act Sensitive -
Any misuse or unauthorized disclosure can result in both civil and criminal penalties.
United States Marine Corps
Individual Training Standards System
Maintenance Training Management
and Evaluation Program
Training Jacket
Name: MCDOULETT, RICKEY D SGT
MarTrngJkt

Report:
Date Printed:
Page 3 of 300
11-Feb-16
MarTrngJkt
REVIEW RECORD
1. The following records will be filed here:
a. Review Record
b. Individual Experience Data Sheet (not applicable)

Report:
Date Printed:
Page 4 of 300
11-Feb-16
MarTrngJkt
DATA REQUIRED BY THE PRIVACY ACT of 1974
(5 U.S.C. 552A)
PART A - GENERAL
The Marine Corps uses a variety of forms in administering matters related to the individual Marine. Forms are necessary for
enlistment and reenlistment, evaluating, performance, applying for training and assignments, granting leave, disciplinary action,
administering pay, and other purposes. In some instances, these forms involve the collection of personal information from the
individual Marine. Information such as home address and telephone number, names and other information on dependents, prefer-
ence for duty, address on leave, and the individual's Social Security Number are illustrative of the information asked for on forms.
The Privacy Act of 1974 requires that you be informed of the authority, purposes, uses, and effects of not providing information
when it is requested from you. In order to eliminate the need for issuing an individual statement each time information is requested
from you about matters such as those described, this statement serves as a one-time Privacy Act Statement which is intended to
satisfy the requirements of the Privacy Act when forms related to your personnel and pay records are used. If you desire more
information about a specific form when it is used, your commanding officer will provide such informations upon request.

Report:
Date Printed:
Page 5 of 300
11-Feb-16
MarTrngJkt
CWO-3 GATHERS, EMANUEL
SSGT RAYMOND, ERNEST
CWO-3 GATHERS, EMANUEL
SSGT SWEENEY, WALTER
CAPT GORDON, MELISSA
SSGT SWEENEY, WALTER L
SSGT GRANINGER, KEVIN G
SSGT CLARK, STEPHEN D
GYSGT BODFISH, CARL A
CAPT WARREN, TIMOTHY O
GYSGT CARDWELL, DUSTIN K
GYSGT FOSTER, HEATH E
CWO3 SQUILLACE, AZUR D
SSGT ALEXANDER, MATTHEW R
24-Mar-09 QUARTERLY
23-Apr-09 QUARTERLY
08-Jun-09 QUARTERLY
30-Jun-09 QUARTERLY
27-Aug-09 QUARTERLY
01-Dec-09 QUARTERLY SGT ISAACS, WILLIAM
28-Jan-10 QUARTERLY
22-Jun-10 OTHER
23-Sep-10 OTHER SSGT MARTINEZ, M
03-Aug-11 QUARTERLY SSGT BODFISH, CARL A
06-Dec-11 QUARTERLY
07-Feb-12 QUARTERLY
11-May-12 OTHER
20-Jun-12 QUARTERLY
28-Sep-12 QUARTERLY
28-Dec-12 QUARTERLY
02-Feb-13 OTHER
03-Sep-13 QUARTERLY
09-Sep-13 INITIAL
16-Sep-13 QUARTERLY
01-Nov-13 OTHER
16-Dec-13 QUARTERLY
21-Mar-14 QUARTERLY
06-Jun-14 QUARTERLY SSGT KRAUSE, JUSTIN L
05-Sep-14 QUARTERLY SSGT KRAUSE, JUSTIN L
08-Sep-14 INITIAL
08-Dec-14 QUARTERLY SSGT KRAUSE, JUSTIN L
09-Mar-15 QUARTERLY SSGT KRAUSE, JUSTIN L
09-Jun-15 QUARTERLY SSGT KRAUSE, JUSTIN L
09-Sep-15 QUARTERLY
09-Dec-15 QUARTERLY SGT EALY, JUSTIN W
SOP FOR ITSS MATMEP
REVIEW RECORD
DATE OF REVIEW REMARKS SIGNATURE/TITLE

Report:
Date Printed:
Page 6 of 300
11-Feb-16
MarTrngJkt
ITSS (MATMEP)
DUTY AREA
A. GENERAL, OPERATIONAL AND SAFETY DUTIES
CORROSION CONTROL (MOS MATMEP)

Report:
Date Printed:
Page 7 of 300
11-Feb-16
MarTrngJkt
ITSS (MATMEP)
DUTY AREA
HELICOPTER POWER PLANT MECHANIC T-400/T-700 ENGINE (MOS MAY)

Report:
Date Printed:
Page 8 of 300
11-Feb-16
MarTrngJkt
ITSS (MATMEP)
DUTY AREA
INTERMEDIATE LEVEL MAINTENANCE MATMEP (MOS SECTIONS)

Report:
Date Printed:
Page 9 of 300
11-Feb-16
MarTrngJkt
LEVEL I: An asterisk in level I indicates the task is taught at the "Entry Level (A)
School".
LEVEL II: An asterisk in level II indicates the task is taught at the NAMTRAGRU DET. Other
tasks in level II not indicated with an asterisk will be signed off when exposed
to the individual for the first time. All subsequent training which the Marine
performs after initial exposure should be annotated on the OPNAV 4790/33/ form
until he/she is signed of in level III.
LEVEL III: An asterisk in level III indicates the task is considered training essential. A
sign-off in level III indicates the Marine can perform that task w/o direct
supervision. The unit is responsible for these sign-offs.
LEVEL IV: Used by the unit to indicate an individual is advanced in technical and
supervisory functions. Prior to sign-off, all training essential and training
optional tasks in level III must have been signed-off. Only one sign-off for the
Duty Area is required.
Sign-off blanks: (MO/YR) / INDIVIDUAL'S INITIALS / SUPERVISOR'S INITIALS)
Note: Refer to MCO P4790.20_ for further clarification.

Report:
Date Printed:
Page 10 of 300
11-Feb-16
MarTrngJkt
ITSS (MATMEP)
QUALITY ASSURANCE (MOS MATMEP)
DUTY AREA
LEVEL I LEVEL II LEVEL III LEVEL IV
XXXXXXXXXXXX XXXXXXXXXXXX 12/11 / SW
XXXXXXXXXXXX XXXXXXXXXXXX 10/12 / SM
XXXXXXXXXXXX XXXXXXXXXXXX 07/13 / SH
XXXXXXXXXXXX XXXXXXXXXXXX 06/11 / SJ
SIGN OFF TASK AREA AIRCRAFT CONTRACTORS
SIGN OFF TASK AREA AUDIT PROGRAM
SIGN OFF TASK AREA CENTRAL TECHNICAL PUBLICATION
LIBRARY (CTPL)
SIGN OFF TASK AREA COLLATERAL DUTY INSPECTOR (CDI),
COLLATERAL DUTY QUALITY ASSURANCE REPRESENTATIVE
(CDQAR), AND QUALITY ASSURANCE REPRESENTATIVE (QAR)
SIGN OFF TASK AREA CORROSION CONTROL
SIGN OFF TASK AREA CORROSION DOCUMENTATION PROCEDURES
SIGN OFF TASK AREA ESTABLISH STANDARD PROCEDURES FOR
CONDUCTING INSPECTIONS
SIGN OFF TASK AREA GAS FREE ENGINEERING PROGRAM
SIGN OFF TASK AREA HISTORICAL FILES
SIGN OFF TASK AREA INSPECTION TOOLS/EQUIPMENT
SIGN OFF TASK AREA INSPECTIONS OF MAINTENANCE
EQUIPMENT AND FACILITIES
SIGN OFF TASK AREA LOCAL COMMAND PROCEDURES (LCP'S)
SIGN OFF TASK AREA LOGBOOK/RECORDS
SIGN OFF TASK AREA LOGBOOKS AND ASSOCIATED RECORDS
SIGN OFF TASK AREA MAINTENANCE DATA REPORTS (MDR'S)
SIGN OFF TASK AREA MATERIAL CONTROL FUNCTIONS
SIGN OFF TASK AREA MONITORED PROGRAMS
SIGN OFF TASK AREA MONTHLY MAINTENANCE PLAN (MMP)
SIGN OFF TASK AREA NAVAL AVIATION MAINTENANCE
DISCREPANCY REPORTING PROGRAM (NAMDRP)
SIGN OFF TASK AREA OPERATION OF SPRAY PAINT GUN AND
PAINT APPLICATION
SIGN OFF TASK AREA PLANNED MAINTENANCE SYSTEM (PMS)
SIGN OFF TASK AREA PREPARATION, PAINTS AND CORROSION
PREVENTATIVES USED TO COMBAT CORROSION ON AIRCRAFT
SIGN OFF TASK AREA PRODUCTION/MATERIAL CONTROL
RESPONSIBILITIES
SIGN OFF TASK AREA QUALITY ASSURANCE (QA) PROGRAM
SIGN OFF TASK AREA SAFETY PRECAUTIONS AND PROCEDURES
SIGN OFF TASK AREA SHELF LIFE ITEMS
SIGN OFF TASK AREA SPECIAL/ENGINE INSPECTION
PROCEDURES AND RESPONSIBILITIES
SIGN OFF TASK AREA SUPPORT EQUIPMENT (SE)
SIGN OFF TASK AREA SUPPORT EQUIPMENT (SE) MISUSE/ABUSE
PROGRAM
SIGN OFF TASK AREA SUPPORT/SPECIAL EQUIPMENT
SIGN OFF TASK AREA SURFACE TREATMENT
MATERIALS/TECHNIQUES
SIGN OFF TASK AREA TECHNICAL DIRECTIVE COMPLIANCE
(TDC)
SIGN OFF TASK AREA TYPE METAL/COMPONENTS
SIGN OFF TASK AREA TYPES OF CORROSION
SIGN OFF TASK AREA VISUAL INFORMATION DISPLAY SYSTEM
(VIDS)/NAVAL AVIATION LOGISTICS COMMAND MANAGEMENT
INFORMATION SYSTEM (NALCOMIS)
DUTY DESCRIPTION DATE/SIGN DATE/SIGN DATE/SIGN DATE/SIGN

Report:
Date Printed:
Page 11 of 300
11-Feb-16
MarTrngJkt
ITSS (MATMEP)
DUTY AREA
XXXXXXXXXXXX 02/09 / RE 02/09 / RE
02/12 / SW 02/09 / RE 04/10 / DM
XXXXXXXXXXXX 02/09 / RE 04/10 / DM
02/12 / SW 02/09 / RE 11/09 / RE
XXXXXXXXXXXX XXXXXXXXXXXX 04/10 / DM
XXXXXXXXXXXX XXXXXXXXXXXX 01/10 / RE
XXXXXXXXXXXX 02/09 / RE 04/10 / DM
02/12 / SW 02/09 / RE 04/10 / DM
02/12 / SW 02/09 / RE 04/10 / DM
02/12 / SW 02/09 / RE 02/09 / RE
02/12 / SW 02/09 / RE 02/09 / RE
02/12 / SW 02/09 / RE 02/09 / RE
02/12 / SW 02/09 / RE 02/09 / RE
02/12 / SW 02/09 / RE 02/09 / RE
02/12 / SW 02/09 / RE 02/09 / RE
02/12 / SW 02/09 / RE 02/09 / RE
SIGN OFF TASK AREA CORROSION CONTROL
SIGN OFF TASK AREA HELICOPTER PUBLICATIONS, DIAGRAMS,
SKETCHES AND DRAWINGS
SIGN OFF TASK AREA PRECISION MEASURING EQUIPMENT
SIGN OFF TASK AREA SAFETY PRECAUTIONS AND PROCEDURES
AROUND THE WORK CENTER
SIGN OFF TASK AREA SCHEDULED/UNSCHEDULED INSPECTIONS
SIGN OFF TASK AREA SUPPORT/SPECIAL EQUIPMENT
SIGN OFF TASK AREA T-400 ENGINE ASSEMBLY
TROUBLESHOOTING TECHNIQUES/STEPS
SIGN OFF TASK AREA T-400 POWER SECTION ASSEMBLY
SIGN OFF TASK AREA T-400 REDUCTION GEARBOX ASSEMBLY
SIGN OFF TASK AREA T-700 AIR SYSTEM
SIGN OFF TASK AREA T-700 COLD SECTION MODULE
SIGN OFF TASK AREA T-700 ELECTRICAL SYSTEM
SIGN OFF TASK AREA T-700 FUEL SYSTEM
SIGN OFF TASK AREA T-700 LUBRICATION SYSTEM
SIGN OFF TASK AREA T-700 POWER TURBINE MODULE
SIGN OFF TASK AREA TECHNICAL DIRECTIVES
CHANGES/BULLETINS

Report:
Date Printed:
Page 12 of 300
11-Feb-16
MarTrngJkt
ITSS (MATMEP)
DUTY AREA
XXXXXXXXXXXX 04/09 / RE XXXXXXXXXXXX
SIGN OFF TASK AREA ARMAMENT PROGRAMS
SIGN OFF TASK AREA CORROSION PREVENTION AND CONTROL
PROGRAM
SIGN OFF TASK AREA ELECTROSTATIC DISCHARGE (ESD)
CONTROL AND PREVENTION PROGRAM
SIGN OFF TASK AREA FIRE PREVENTION/PROTECTION PROGRAM
ITSS (MATMEP)
SIGN OFF TASK AREA FOREIGN OBJECT DAMAGE (FOD)
PREVENTION PROGRAM
SIGN OFF TASK AREA HAZARDOUS MATERIALS/HAZARDOUS WASTE
PROGRAM
SIGN OFF TASK AREA HYDRAULIC FLUID CONTAMINATION
CONTROL PROGRAM
SIGN OFF TASK AREA INDIVIDUAL COMPONENT REPAIR LIST
(ICRL) PROGRAM
SIGN OFF TASK AREA INSPECTIONS
SIGN OFF TASK AREA MAINTENANCE DATA REPORTS (MDR'S)
SIGN OFF TASK AREA MAINTENANCE TRAINING PROGRAM
SIGN OFF TASK AREA MATERIAL CONTROL FUNCTIONS
SIGN OFF TASK AREA METROLOGY AND CALIBRATION (METCAL)
PROGRAM
SIGN OFF TASK AREA MOBILE FACILITIES (MFS)
SIGN OFF TASK AREA NAVAL AVIATION LOGISTICS COMMAND
MANAGEMENT INFORMATION SYSTEM (NALCOMIS)
SIGN OFF TASK AREA PLANNED MAINTENANCE SYSTEM (PMS)
SIGN OFF TASK AREA SUPPORT EQUIPMENT (SE)MISUSE AND
ABUSE PROGRAM
SIGN OFF TASK AREA TOOL CONTROL PROGRAM (TCP)
SIGN OFF TASK AREA VISUAL INFORMATION DISPLAY SYSTEM
(VIDS)

Report:
Date Printed:
Page 13 of 300
11-Feb-16
MarTrngJkt
ITSS (MATMEP)
INDIVIDUAL QUALIFICATION RECORD
DUTY DESCRIPTION
SIGN OFF TASK AREA CORROSION DOCUMENTATION
PROCEDURES
* 12/11 /
/SW
SIGN OFF TASK AREA GAS FREE ENGINEERING
PROGRAM
* 08/12 /
/SM
SIGN OFF TASK AREA MONITORED PROGRAMS * 08/12 /
/SM
SIGN OFF TASK AREA AUDIT PROGRAM * 12/11 /
/SW
SIGN OFF TASK AREA TECHNICAL DIRECTIVE
COMPLIANCE (TDC)
* 07/13 /
/SH
SIGN OFF TASK AREA CENTRAL TECHNICAL
PUBLICATION LIBRARY (CTPL)
* 10/12 /
/SM
SIGN OFF TASK AREA MAINTENANCE DATA REPORTS
(MDR'S)
* 08/12 /
/SM
SIGN OFF TASK AREA SUPPORT/SPECIAL EQUIPMENT * 12/11 /
/SW
SIGN OFF TASK AREA SAFETY PRECAUTIONS AND
PROCEDURES
* 12/11 /
/SW
SIGN OFF TASK AREA CORROSION CONTROL * 12/11 /
/SW
SIGN OFF TASK AREA SPECIAL/ENGINE INSPECTION
PROCEDURES AND RESPONSIBILITIES
* 07/13 /
/SH
SIGN OFF TASK AREA INSPECTION TOOLS/EQUIPMENT * 06/11 /
/SJ
SIGN OFF TASK AREA OPERATION OF SPRAY PAINT
GUN AND PAINT APPLICATION
* 12/11 /
/SW
SIGN OFF TASK AREA TYPE METAL/COMPONENTS * 12/11 /
/SW
SIGN OFF TASK AREA HISTORICAL FILES * 07/13 /
/SH
SIGN OFF TASK AREA LOGBOOKS AND ASSOCIATED
RECORDS
* 07/13 /
/SH
SIGN OFF TASK AREA MATERIAL CONTROL FUNCTIONS * 07/13 /
/SH
SIGN OFF TASK AREA COLLATERAL DUTY INSPECTOR
(CDI), COLLATERAL DUTY QUALITY ASSURANCE
REPRESENTATIVE (CDQAR), AND QUALITY ASSURANCE
REPRESENTATIVE (QAR)
* 10/12 /
/SM
SIGN OFF TASK AREA ESTABLISH STANDARD
PROCEDURES FOR CONDUCTING INSPECTIONS
* 09/12 /
/SM
SIGN OFF TASK AREA LOCAL COMMAND PROCEDURES
(LCP'S)
* 09/12 /
/SM
SIGN OFF TASK AREA QUALITY ASSURANCE (QA)
PROGRAM
* 10/12 /
/SM
* 12/11 /
/SW
SIGN OFF TASK AREA PLANNED MAINTENANCE SYSTEM
(PMS)
* 07/13 /
/SH
SIGN OFF TASK AREA SUPPORT EQUIPMENT (SE) * 07/13 /
/SH
SIGN OFF TASK AREA PRODUCTION/MATERIAL
CONTROL RESPONSIBILITIES
* 03/13 /
/SH
SIGN OFF TASK AREA AIRCRAFT CONTRACTORS * 12/11 /
/SW
SIGN OFF TASK AREA LOGBOOK/RECORDS * 09/12 /
/SM
SIGN OFF TASK AREA TYPES OF CORROSION * 12/11 /
/SW
SIGN OFF TASK AREA SURFACE TREATMENT
MATERIALS/TECHNIQUES
* 12/11 /
/SW
SIGN OFF TASK AREA VISUAL INFORMATION DISPLAY
SYSTEM (VIDS)/NAVAL AVIATION LOGISTICS
COMMAND MANAGEMENT INFORMATION SYSTEM
(NALCOMIS)
* 07/13 /
/SH
SIGN OFF TASK AREA INSPECTIONS OF MAINTENANCE
EQUIPMENT AND FACILITIES
* 12/11 /
/SW
TASK DESCRIPTION REFERENCE LEVEL I LEVEL IVWUC LEVEL II LEVEL III

Report:
Date Printed:
Page 14 of 300
11-Feb-16
MarTrngJkt
ITSS (MATMEP)
DUTY DESCRIPTION (Cont.)
SUPPORT/SPECIAL EQUIPMENT
SAFETY PRECAUTIONS AND PROCEDURES
SIGN OFF TASK AREA PREPARATION, PAINTS AND
CORROSION PREVENTATIVES USED TO COMBAT
CORROSION ON AIRCRAFT
* 12/11 /
/SW
SIGN OFF TASK AREA SHELF LIFE ITEMS * 12/11 /
/SW
SIGN OFF TASK AREA MONTHLY MAINTENANCE PLAN
(MMP)
* 07/13 /
/SH
MISUSE/ABUSE PROGRAM
* 12/11 /
/SW
OPERATES PNEUMATIC DRILL MOTOR * 12/11 /
/SW
OPERATES SEALANT GUN HAND OPERATED * 12/11 /
/SW
OPERATES ABRASIVE WHEEL * 12/11 /
/SW
DESCRIBES THE BASIC CONCEPT OF QUALITY
ASSURANCE
* 05/10 /
/WW
OPERATES SOLVENT GUN * 12/11 /
/SW
DEMO KNOWLEDGE OF PRODUCTION CONTROL
RESPONSIBILITIES
* 03/13 /
/SH
OPERATES FLAP BRUSH * 12/11 /
/SW
OPERATES AIR REGULATOR * 12/11 /
/SW
IDENTIFY BASIC TERMS APPLIED TO THE QA
PROGRAM
* 08/12 /
/SM
OPERATES VACUUM CLEANER * 12/11 /
/SW
OPERATES SPRAY KIT SELF PRESSURIZED * 12/11 /
/SW
OPERATES SPRAY GUN, PAINT * 12/11 /
/SW
OPERATES AMBIENT AIR BREATHER PUMP * 12/11 /
/SW
OPERATES TOUCH UP PAINT GUN * 12/11 /
/SW
OPERATES RESPIRATOR * 12/11 /
/SW
DEMO KNOWLEDGE OF MATERIAL CONTROL
RESPONSIBILITIES
* 03/13 /
/SH
SPECIFY SPECIFIC RESPONSIBILITIES OF THE
QUALITY ASSURANCE REPRESENTATIVE
* 08/12 /
/SM
OPERATES SEALANT GUN AIR POWERED * 12/11 /
/SW
OPERATES VISCOMETER, ZAHN CUP * 12/11 /
/SW
IDENTIFIES FACTORS REQUIRED TO ACHIEVE
CONCEPTS OF QUALITY ASSURANCE
* 08/12 /
/SM
DEMO KNOWLEDGE OF RESPIRATORY PROTECTION
PROGRAM: CHANGE FILTER
* 12/11 /
/SW
DEMO KNOWLEDGE OF SIGHT PROTECTION PROGRAM:
IDENTIFYING EYE HAZARDS ANSI STANDARDS
* 12/11 /
/SW
DEMO KNOWLEDGE OF CARE AND USE OF PERSONAL
PROTECTIVE EQUIPMENT: GLOVES ANSI STANDARDS
* 12/11 /
/SW
DEMO KNOWLEDGE OF VISUAL INFORMATION DISPLAY
SYSTEM/MAINTENANCE ACTION FORM (VIDS/MAF:
ASSIGN DOCUMENT NUMBER
* 04/13 /
/SG
TASK DESCRIPTION REFERENCE LEVEL I LEVEL IVWUC
LEVEL II LEVEL III
LEVEL II LEVEL III
LEVEL II LEVEL III

Report:
Date Printed:
Page 15 of 300
11-Feb-16
MarTrngJkt
ITSS (MATMEP)
PRODUCTION/MATERIAL CONTROL (MOS MATMEP)
SYSTEM/MAINTENANCE ACTION FORM (VIDS/MAF: BCM
ACTION
* 04/13 /
/SG
DEMO KNOWLEDGE OF OPERATING PROCEDURES OF
NALCOMIS: MAIL BOX DESCRIPTIONS
* 04/13 /
/SG
DEMO KNOWLEDGE OF TYPES OF TECHNICAL MANUALS:
OPNAVINST 4790.2 SERIES
* 02/10 /
/KB
PROGRAM: SELECTION OF PROPER RESPIRATOR ANSI
STANDARDS

A-3 RESPIRATORY PROTECTION PROGRAM: USE OF
RESPIRATOR
* 12/11 /
/SW
NALCOMIS: CONVERSATION ERROR MESSAGES-
MAINTENANCE DBA FUNCTION, CANNIBALIZATION
PROCEDURES
* 06/13 /
/SH
DEMO KNOWLEDGE OF NUMBERING, INDEXING AND
SECURITY CLASSIFICATIONS OF PUBLICATIONS:
TECHNICAL MANUAL NUMBER IDENTIFICATION SYSTEM
* 05/12 /
/SW
DIRECTIVES APPLICATION LIST
* 06/12 /
/SM
MANAGEMENT OF CLASSIFIED MANUALS
* 06/12 /
/SM
PROGRAM: IDENTIFICATION OF RESPIRATORY
HAZARDS ANSI STANDARDS
* 12/11 /
/SW
PROGRAM: CLEAN
* 12/11 /
/SW
DEMO KNOWLEDGE OF OPERATING PROCEDURES OF THE
VISUAL INFORMATION DISPLAY SYSTEM (VIDS)
* 03/13 /
/SH
UPDATING SUBSYSTEM CAPABILITY AND IMPACT
REPORTING (SCIR) INFORMATION
* 04/13 /
/SG
NALCOMIS: TERMS AND ABBREVIATIONS
* 04/13 /
/SG
NALCOMIS: TECHNICAL DIRECTIVE
ADDITION/DELETION/UPDATE
* 06/13 /
/SH
NALCOMIS: BCM ACTION
* 06/13 /
/SH
IDENTIFYING CLASSIFIED MANUALS
* 06/12 /
/SM
DEMO KNOWLEDGE OF HEARING PROTECTION PROGRAM:
IDENTIFIES NOISE HAZARDS ANSI STANDARDS
* 12/11 /
/SW
NAVAL AERONAUTICAL PUBLICATIONS INDEX (NAPI)
* 05/12 /
/SW
EQUIPMENT APPLICABILITY LIST
* 06/12 /
/SM
PROTECTIVE EQUIPMENT: COVERALLS ANSI
STANDARDS
* 12/11 /
/SW
ASSIGNMENT OF JOB CONTROL NUMBERS (JCN'S)
* 03/13 /
/SH
NALCOMIS: MAINTENANCE DBA FUNCTION, BACK FIT
PROCEDURES
* 06/13 /
/SH
NAVY STOCK LIST OF PUBLICATIONS AND FORMS
* 06/12 /
/SM
DEMO KNOWLEDGE OF CTPL AUDITING PROCEDURES * 06/12 /
/SM
PROGRAM: SELECTION OF PROPER RESPIRATOR ANSI
STANDARDS
* 12/11 /
/SW
PROGRAM: CARE AND STORAGE OF RESPIRATORS ANSI
STANDARDS
* 12/11 /
/SW
TASK DESCRIPTION REFERENCE LEVEL I LEVEL IVLEVEL II LEVEL III
VISUAL INFORMATION DISPLAY SYSTEM (VIDS)/NAVAL AVIATION LOGISTICS COMMAND MANAGEMENT INFORMATION SYSTEM (NALCOMIS)
(Cont.)
WUC

Report:
Date Printed:
Page 16 of 300
11-Feb-16
MarTrngJkt
ITSS (MATMEP)
SAFETY PRECAUTIONS AND PROCEDURES (Cont.)
TYPES OF CORROSION
DEMO KNOWLEDGE OF SIGHT PROTECTION PROGRAM:
SELECTS PROPER PROTECTIVE EQUIPMENT ANSI
STANDARDS
* 12/11 /
/SW
DEMO KNOWLEDGE OF HEARING PROTECTION PROGRAM:
SELECTS AND USES PROPER HEARING PROTECTION
ANSI STANDARDS
* 12/11 /
/SW
PROTECTIVE EQUIPMENT: SAFETY FOOT WEAR ANSI
STANDARDS
* 12/11 /
/SW
PROTECTIVE EQUIPMENT: HELMETS AND HOODS ANSI
STANDARDS
* 12/11 /
/SW
DISTRIBUTION/CONTROL OF VIDS/MAF
* 04/13 /
/SG
NALCOMIS: REPORTS
* 04/13 /
/SG
NALCOMIS: ICRL ADD/CORRECTION/DELETION
PROCEDURES
* 06/13 /
/SH
NALCOMIS: MATERIAL DIRECT/INDIRECT APPROVAL
PROCEDURES
* 06/13 /
/SH
CRIPL
* 05/12 /
/SW
DEMO KNOWLEDGE OF INVENTORY CONTROL * 06/12 /
/SM
UPDATING INFORMATION/STATUS OF VIDS/MAF
* 04/13 /
/SG
NALCOMIS: TYPE MAF CODES
* 06/13 /
/SH
NALCOMIS: NAMP TO NALCOMIS CROSS REFERENCE
* 06/13 /
/SH
PROGRAM: CHANGE LENS
* 12/11 /
/SW
INITIATING VIDS/MAF
* 03/13 /
/SH
FEDLOG
* 02/10 /
/KB
STANDARD/NON-STANDARD SIZE MANUALS
* 05/12 /
/SW
DEMO KNOWLEDGE OF DIRECT SURFACE ATTACK * 12/11 /
/SW
DEMO KNOWLEDGE OF CREVICE ATTACK CORROSION * 12/11 /
/SW
DEMO KNOWLEDGE OF STRESS CORROSION CRACKING * 12/11 /
/SW
DEMO KNOWLEDGE OF INTERGRANULAR CORROSION * 12/11 /
/SW
DEMO KNOWLEDGE OF GENERAL FILE * 06/13 /
/SH
DEMO KNOWLEDGE OF MICROBIOLOGICAL INDUCED
CORROSION
* 12/11 /
/SW
DEMO KNOWLEDGE OF PITTING CORROSION * 12/11 /
/SW
DEMO KNOWLEDGE OF CORROSION FATIGUE * 12/11 /
/SW
DEMO KNOWLEDGE OF MISCELLANEOUS FILE * 06/13 /
/SH
DEMO KNOWLEDGE OF EXFOLIATION CORROSION * 12/11 /
/SW
DEMO KNOWLEDGE OF FRETTING CORROSION * 12/11 /
/SW
LEVEL II LEVEL III
LEVEL II LEVEL III

Report:
Date Printed:
Page 17 of 300
11-Feb-16
MarTrngJkt
ITSS (MATMEP)
OPERATION OF SPRAY PAINT GUN AND PAINT APPLICATION
PREPARATION, PAINTS AND CORROSION PREVENTATIVES USED TO COMBAT CORROSION ON AIRCRAFT
DEMO KNOWLEDGE OF CDI * 02/10 /
/KB
DEMO KNOWLEDGE OF CDQAR * 02/10 /
/KB
DEMO KNOWLEDGE OF QAR OPNAVINST * 07/12 /
/SK
DEMO KNOWLEDGE OF GALVANIC/DISSIMILAR METAL * 12/11 /
/SW
DEMO KNOWLEDGE OF FILIFORM CORROSION * 12/11 /
/SW
DEMO KNOWLEDGE OF INSPECTION FILE * 06/13 /
/SH
DEMO KNOWLEDGE OF TECHNICAL DIRECTIVE
COMPLIANCE (TDC), FILE
* 06/13 /
/SH
PERFORM CARE AND CLEANING OF SPRAY GUN:
CHANGE FILTERS
* 12/11 /
/SW
PERFORM USE OF SPRAY GUN * 12/11 /
/SW
DEMO KNOWLEDGE OF CAT II TPDR * 07/11 /
/SJ
DEMO KNOWLEDGE OF NAMDRP REPORT PREPARATION * 07/11 /
/SJ
PERFORM FUNCTIONAL CHECK: SPRAYING PROCEDURES * 12/11 /
/SW
PERFORM CARE AND CLEANING OF SPRAY GUN: CLEAN * 12/11 /
/SW
PERFORM TOP COATING * 12/11 /
/SW
DEMO KNOWLEDGE OF ENGINEERING INVESTIGATION
(EI) PROGRAM
* 02/10 /
/KB
DEMO KNOWLEDGE OF QUALITY DEFICIENCY
REPORTING (QDR) PROGRAM: CAT II TPDR
* 02/10 /
/KB
DEMO KNOWLEDGE OF PURPOSE OF THE MONTHLY
MAINTENANCE PLAN (MMP)
* 06/13 /
/SH
DEMO KNOWLEDGE OF TECHNICAL PUBLICATION
DISCREPANCY REPORT (TPDR) PROGRAM: CAT I TPDR
* 07/11 /
/SJ
DEMO KNOWLEDGE OF DISTRIBUTION OF THE MMP * 06/13 /
/SH
DEMO KNOWLEDGE OF TECHNICAL PUBLICATION
DISCREPANCY REPORT (TPDR) PROGRAM: CAT II
TPDR
* 07/11 /
/SJ
PERFORM THEORY OF OPERATION: SELF MEASURED
SPRAY KIT
* 12/11 /
/SW
DEMO KNOWLEDGE OF HAZARDOUS MATERIAL
REPORTING (HMR) PROGRAM
* 07/11 /
/SJ
DEMO KNOWLEDGE OF CONVENTIONAL ORDNANCE
DEFICIENCY REPORTING (CODR)
* 07/11 /
/SJ
DEMO KNOWLEDGE OF THEORY OF OPERATION: SPRAY
GUN
* 12/11 /
/SW
PERFORM FUNCTIONAL CHECK: ADJUSTMENT OF SPRAY
GUN
* 12/11 /
/SW
DEMO KNOWLEDGE OF REQUIRED INPUT/CHANGES FOR
THE MMP
* 06/13 /
/SH
DEMO KNOWLEDGE OF PREPARATION: SANDING * 12/11 /
/SW
DEMO KNOWLEDGE OF PROTECTIVE COATING: TOP
COAT
* 12/11 /
/SW
TASK DESCRIPTION REFERENCE LEVEL I LEVEL IV
LEVEL II LEVEL III
LEVEL II LEVEL III
LEVEL II LEVEL III
COLLATERAL DUTY INSPECTOR (CDI), COLLATERAL DUTY QUALITY ASSURANCE REPRESENTATIVE (CDQAR), AND QUALITY ASSURANCE
REPRESENTATIVE (QAR) (Cont.)
WUC

Report:
Date Printed:
Page 18 of 300
11-Feb-16
MarTrngJkt
ITSS (MATMEP)
PREPARATION, PAINTS AND CORROSION PREVENTATIVES USED TO COMBAT CORROSION ON AIRCRAFT (Cont.)
SPECIAL/ENGINE INSPECTION PROCEDURES AND RESPONSIBILITIES
DEMO KNOWLEDGE OF SOLVENTS/THINNERS:
ALIPATHIC THINNER
* 12/11 /
/SW
DEMO KNOWLEDGE OF STENCIL * 12/11 /
/SW
DEMO KNOWLEDGE OF PRIMERS: EPOXY POLYAMIDE
PRIMER
* 12/11 /
/SW
DEMO KNOWLEDGE OF PAINT: WALKWAY COATING,
MIL-W-5044 TYPE II
* 12/11 /
/SW
INSPECT FIRE * 07/11 /
/ST
DEMO KNOWLEDGE OF PROTECTIVE COATING: PRIME * 12/11 /
/SW
DEMO KNOWLEDGE OF PAINT: EPOXY POLYAMIDE * 12/11 /
/SW
DEMO KNOWLEDGE OF PLANNED MAINTENANCE SYSTEM
(PMS) PUBLICATIONS: MAINTENANCE REQUIREMENT
CARDS (MRC'S)/LOCAL MRC'S
* 06/13 /
/SH
PERFORM SAFETY: GROUND SAFETY INSPECTION * 12/11 /
/SW
DEMO KNOWLEDGE OF PREPARATION: FLAP BRUSH * 12/11 /
/SW
DEMO KNOWLEDGE OF PAINT REMOVER, MIL-R-81294 * 12/11 /
/SW
DEMO KNOWLEDGE OF MASKING * 12/11 /
/SW
DEMO KNOWLEDGE OF PROTECTIVE COATING: SEAL * 12/11 /
/SW
DEMO KNOWLEDGE OF SOLVENTS/THINNERS: METHYL
ETHYL KETONE (MEK)
* 12/11 /
/SW
(PMS) PUBLICATIONS: PERIODIC MAINTENANCE
INFORMATION CARDS (PMIC'S)
* 06/13 /
/SH
(PMS) PUBLICATIONS: CHECKLISTS
* 06/13 /
/SH
(PMS) PUBLICATIONS: SUPPORT EQUIPMENT
STANDARDIZATION SYSTEM
* 06/13 /
/SH
DEMO KNOWLEDGE OF CORROSION PREVENTATIVE
COMPOUNDS: OIL
* 12/11 /
/SW
DEMO KNOWLEDGE OF CORROSION PREVENTATIVE
COMPOUNDS: MIL-C-16173 COMPOUND
* 12/11 /
/SW
DEMO KNOWLEDGE OF PRIMERS: ZINC CHROMATE
PRIMER
* 12/11 /
/SW
PREPARE SAFETY: GROUND SAFETY MEETING/MINUTES * 12/11 /
/SW
DEMO KNOWLEDGE OF PAINT: POLYURETHANE PAINT * 12/11 /
/SW
INSPECT ENVIRONMENTAL CONDITIONS * 07/11 /
/ST
DEMO KNOWLEDGE OF PAINT: ACRYLIC
NITROCELLULOSE LACQUERS
* 12/11 /
/SW
DEMO KNOWLEDGE OF PRESERVATION/DEPRESERVATION
REQUIREMENTS
* 06/13 /
/SH
DEMO KNOWLEDGE OF MDP REPORTS * 06/13 /
/SH
DEMO KNOWLEDGE OF ACCEPTANCE INSPECTIONS * 06/13 /
/SH
LIAISON NAVAL AVIATION ENGINEERING SERVICES
UNIT (NAESU)
* 12/11 /
/SW
LIAISON NAVAL AVIATION DEPOTS * 12/11 /
/SW
DEMO KNOWLEDGE OF TESTING FOR EXTENSIONS ON
SHELF LIFE ITEMS
* 12/11 /
/SW
LEVEL II LEVEL III
LEVEL II LEVEL III

Report:
Date Printed:
Page 19 of 300
11-Feb-16
MarTrngJkt
ITSS (MATMEP)
PRODUCTION/MATERIAL CONTROL (MOS MATMEP)
SPECIAL/ENGINE INSPECTION PROCEDURES AND RESPONSIBILITIES (Cont.)
CORROSION DOCUMENTATION PROCEDURES
CORROSION CONTROL
DEMO KNOWLEDGE OF MAJOR ENGINE INSPECTIONS:
ENGINE CONDITIONAL INSPECTIONS
* 06/13 /
/SH
LIAISON ADMINISTRATIVE CONTRACTING OFFICER
(ACO)
* 12/11 /
/SW
DEMO KNOWLEDGE OF MAJOR ENGINE INSPECTIONS:
ENGINE SPECIAL INSPECTIONS
* 06/13 /
/SH
DEMO KNOWLEDGE OF REPORTING OF OUTDATED
MATERIALS RECEIVED
* 12/11 /
/SW
DEMO KNOWLEDGE OF TRANSFER INSPECTIONS * 06/13 /
/SH
DEMO KNOWLEDGE OF LOW CYCLE FATIGUE (LCF)
PROGRAM
* 06/13 /
/SH
LIAISON NAVAL AVIATION DEPOT OPERATIONS
CENTER (NADOC)
* 12/11 /
/SW
DEMO KNOWLEDGE OF SE RECORDS/FORMS/DOCUMENTS:
SE CUSTODY & MAINTENANCE HISTORY, OPNAV
4790/51
* 06/13 /
/SH
SE PRE-OPERATIONAL RECORD, OPNAV 4790/52
* 06/13 /
/SH
DEMO KNOWLEDGE OF CORROSION DOCUMENTATION:
IDENTIFIES PROPER VIDS/MAF DOCUMENTATION
* 12/11 /
/SW
DEMO KNOWLEDGE OF INSPECTION EQUIPMENT * 02/10 /
/RE
DEMO KNOWLEDGE OF SE MAINTENANCE INSPECTIONS:
SE SCHEDULED INSPECTIONS
* 06/13 /
/SH
SE TRANSACTION REPORT, OPNAV 4790.64
* 06/13 /
/SH
DEMO KNOWLEDGE OF CORROSION DOCUMENTATION:
COMPLETES PROPER VIDS/MAF DOCUMENTATION
* 12/11 /
/SW
DEMO KNOWLEDGE OF SE MAINTENANCE INSPECTIONS:
SE UNSCHEDULED INSPECTIONS
* 06/13 /
/SH
PERFORM PERFORMS CORROSION PREVENTION:
SELECTS/APPLIES PREVENTIVE MATERIALS/METHOD
* 12/11 /
/SW
APPLIES PRIMERS/PAINTS
* 12/11 /
/SW
PERFORM CORROSION DETECTION: IDENTIFICATION * 12/11 /
/SW
IDENTIFIES CORROSION PRONE AREAS
* 12/11 /
/SW
DEMO KNOWLEDGE OF TECHNICAL DIRECTIVE STATUS
ACCOUNTING (TDSA) SYSTEM
* 06/13 /
/SH
DEMO KNOWLEDGE OF TECHNICAL DIRECTIVE CHANGES * 06/13 /
/SH
DEMO KNOWLEDGE OF FINAL INSPECTIONS * 03/12 /
/SW
PERFORM DETECTS CORROSION: DETERMINES
SEVERITY
* 12/11 /
/SW
SELECTS/USES CLEANING MATERIAL/METHOD
* 12/11 /
/SW
BULLETINS
* 06/13 /
/SH
DEMO KNOWLEDGE OF IN-PROCESS INSPECTIONS * 03/12 /
/SW
PERFORM PERFORMS CORROSION PREVENTION: MIXES
PRIMERS/PAINTS
* 12/11 /
/SW
DEMO KNOWLEDGE OF PERIODIC PERSONAL
PERFORMANCE INSPECTIONS
* 03/12 /
/SW
LEVEL II LEVEL III
LEVEL II LEVEL III
LEVEL II LEVEL III

Report:
Date Printed:
Page 20 of 300
11-Feb-16
MarTrngJkt
ITSS (MATMEP)
ESTABLISH STANDARD PROCEDURES FOR CONDUCTING INSPECTIONS (Cont.)
TYPE METAL/COMPONENTS
DEMO KNOWLEDGE OF SCREENING INSPECTION * 03/12 /
/SW
PERFORM CORROSTION DETECTION: CLASSIFICATION * 12/11 /
/SW
REMOVE/TREAT COPPER * 12/11 /
/SW
REVIEW SCHEDULED REMOVAL COMPONENT CARD (SRC) * 03/12 /
/SW
REMOVE/TREAT CORROSION RESISTANT STEEL * 12/11 /
/SW
DEMO KNOWLEDGE OF EQUIPMENT OPERATING RECORD
(OPNAV 4790/31A)
* 06/13 /
/SH
DEMO KNOWLEDGE OF EQUIPMENT HISTORY RECORD
(EHR) (OPNAV 4790/113)
* 06/13 /
/SH
REMOVE/TREAT NICKEL-BASE ALLOY * 12/11 /
/SW
DEMO KNOWLEDGE OF MODULE SERVICE RECORD (MSR)
(OPNAV 4790/135)
* 06/13 /
/SH
REVIEW AVIATION CREW SYSTEMS HISTORY CARD * 03/12 /
/SW
REMOVE/TREAT MAGNESIUM * 12/11 /
/SW
DEMO KNOWLEDGE OF ENGINE LOGBOOK:
REPAIR/REWORK RECORD (OPNAV 4790/23A)
* 06/13 /
/SH
REMOVE/TREAT COMPOSITES * 12/11 /
/SW
REMOVE/TREAT LOW ALLOY STEEL * 12/11 /
/SW
PRESERVATION/DEPRESERVATION RECORD (OPNAV
4790/136A)
* 06/13 /
/SH
DEMO KNOWLEDGE OF SCHEDULED REMOVAL COMPONENT
(SRC) CARD (OPNAV 4790/28A)
* 06/13 /
/SH
REVIEW EQUIPMENT HISTORY RECORD (EHR) * 03/12 /
/SW
REVIEW SUPPORT EQUIPMENT CUSTODY AND
MAINTENANCE HISTORY RECORD
* 03/12 /
/SW
REMOVE/TREAT ALUMINUM * 12/11 /
/SW
REMOVE/TREAT COAXIAL CONNECTORS * 12/11 /
/SW
DEMO KNOWLEDGE OF ENGINE LOGBOOK: TECHNICAL
DIRECTIVES (OPNAV 4790/24A)
* 06/13 /
/SH
MISCELLANEOUS/HISTORY (OPNAV 4790/25A)
* 06/13 /
/SH
DEMO KNOWLEDGE OF AERONAUTICAL EQUIPMENT
SERVICE RECORD (AESR)
* 06/13 /
/SH
REVIEW AERONAUTICAL EQUIPMENT SERVICE RECORD
(AESR)
* 03/12 /
/SW
DEMO KNOWLEDGE OF ENGINE LOGBOOK: INSPECTION
RECORD (OPNAV 4790/22A)
* 06/13 /
/SH
DEMO KNOWLEDGE OF ENGINE LOGBOOK: INVENTORY
RECORD, (OPNAV 4790/27A)
* 06/13 /
/SH
DEMO KNOWLEDGE OF ASSEMBLY SERVICE RECORD
(ASR) (OPNAV 4790/106A)
* 06/13 /
/SH
REVIEW MODULE SERVICE RECORD (MSR) * 03/12 /
/SW
REVIEW ASSEMBLY SERVICE RECORD (ASR) * 08/11 /
/SC
LEVEL II LEVEL III
LEVEL II LEVEL III

Report:
Date Printed:
Page 21 of 300
11-Feb-16
MarTrngJkt
ITSS (MATMEP)
LOCAL COMMAND PROCEDURES (LCP'S)
SUPPORT EQUIPMENT (SE) MISUSE/ABUSE PROGRAM
GAS FREE ENGINEERING PROGRAM
MONITORED PROGRAMS
TREAT MAGNESIUM * 12/11 /
/SW
DEMO KNOWLEDGE OF LOCAL COMMAND PROCEDURES
(LCP'S) PREPARATION: LOCAL COMMAND PROCEDURES
(LCP'S) FOR SPECIFIC PROGRAMS ASSIGNED TO QA
FOR MANAGEMENT
* 02/12 /
/SW
TREAT COMPOSITES * 12/11 /
/SW
DEMO KNOWLEDGE OF RECEIPT/DELIVERY OF PARTS
AND MATERIAL
* 06/13 /
/SH
DEMO KNOWLEDGE OF OPEN PURCHASE REQUEST
PROCEDURES
* 06/13 /
/SH
(LCP'S) PREPARATION: RESPONSIBILITY FOR
PREPARATION
* 02/12 /
/SW
DEMO KNOWLEDGE OF REVIEW REQUIREMENTS OF
LOCAL COMMAND PROCEDURES (LCP'S)
* 02/10 /
/KB
DEMO KNOWLEDGE OF ORDERING PARTS AND
MATERIAL: ASSIGNMENT OF SUPPLY PRIORITIES
* 06/13 /
/SH
DEMO KNOWLEDGE OF SUPPLY RELATED
PUBLICATIONS: EQUIPMENT APPLICABILITY LIST
* 06/13 /
/SH
PUBLICATIONS: CRIPL, (CONSOLIDATED REMAIN-IN-
PLACE LIST)
* 06/13 /
/SH
(LCP'S) PREPARATION: AUDIT LOCAL COMMAND
PROCEDURES (LCP'S)
* 02/12 /
/SW
DEMO KNOWLEDGE OF ICRL * 06/13 /
/SH
DEMO KNOWLEDGE OF TOOL CONTROL * 06/13 /
/SH
TREAT ALUMINUM * 12/11 /
/SW
DEMO KNOWLEDGE OF SOURCE, MAINTENANCE AND
RECOVERABILITY (SM&R) CODES
* 06/13 /
/SH
DEMO KNOWLEDGE OF REPORT, FAMILIAR W/OMRR,
IOU, HIGH PRIORITY NMCS/PMCS
* 06/13 /
/SH
DEMO KNOWLEDGE OF MISUSE/ABUSE INVESTIGATION
PROCEDURES
* 02/10 /
/KB
DEMO KNOWLEDGE OF SUPPORT EQUIPMENT
MISUSE/ABUSE FORM (OPNAV 4790/108), REPORT
INITIATION AND ROUTING
* 02/10 /
/KB
DEMO KNOWLEDGE OF REQUIREMENTS TO
REVOKE/REISSUE SUPPORT EQUIPMENT LICENSE
* 12/11 /
/SW
DEMO KNOWLEDGE OF CERTIFICATION REQUIREMENTS * 07/12 /
/SK
DEMO KNOWLEDGE OF SPECIAL EQUIPMENT * 07/12 /
/SK
DEMO KNOWLEDGE OF STANDBY PERSONNEL
RESPONSIBILITIES
* 07/12 /
/SK
DEMO KNOWLEDGE OF VIBRATION ANALYSIS * 05/12 /
/SW
DEMO KNOWLEDGE OF HAZARDOUS
WASTE/CONTAMINATION
* 02/10 /
/KB
LEVEL II LEVEL III
LEVEL II LEVEL III
LEVEL II LEVEL III
LEVEL II LEVEL III

Report:
Date Printed:
Page 22 of 300
11-Feb-16
MarTrngJkt
ITSS (MATMEP)
MONITORED PROGRAMS (Cont.)
MAINTENANCE DATA REPORTS (MDR'S)
DEMO KNOWLEDGE OF FUEL SURVEILLANCE * 06/10 /
/GA
DEMO KNOWLEDGE OF OIL ANALYSIS/QDM * 06/10 /
/GA
DEMO KNOWLEDGE OF SUPPORT EQUIPMENT (SE)
OPERATOR TRAINING AND LICENSING
* 07/11 /
/ST
DEMO KNOWLEDGE OF CALIBRATION (PME) * 04/10 /
/DM
DEMO KNOWLEDGE OF NON-DESTRUCTIVE INSPECTION
(NDI)
* 02/10 /
/KB
DEMO KNOWLEDGE OF TIRE/WHEEL MAINTENANCE
SAFETY
* 02/10 /
/KB
DEMO KNOWLEDGE OF ORDNANCE CERTIFICATION * 06/12 /
/SM
DEMO KNOWLEDGE OF WELDING CERTIFICATION/RE-
CERTIFICATION
* 05/12 /
/SW
DEMO KNOWLEDGE OF HYDRAULIC CONTAMINATION
CONTROL
* 07/11 /
/SJ
DEMO KNOWLEDGE OF MINIATURE/MICRO-MINIATURE
COMPONENT REPAIR (2M)
* 06/12 /
/SM
DEMO KNOWLEDGE OF CORROSION CONTROL
PREVENTION
* 02/10 /
/KB
DEMO KNOWLEDGE OF SE PLANNED MAINTENANCE
SYSTEM (PMS)
* 02/10 /
/KB
DEMO KNOWLEDGE OF AVIATORS BREATHING OXYGEN
(ABO)
* 06/12 /
/SM
DEMO KNOWLEDGE OF LASER SAFETY * 05/12 /
/SW
DEMO KNOWLEDGE OF FOREIGN OBJECT DAMAGE (FOD) * 02/10 /
/KB
DEMO KNOWLEDGE OF TOOL CONTROL PROGRAM (TCP) * 04/10 /
/DM
DEMO KNOWLEDGE OF ICRL * 02/10 /
/KB
DEMO KNOWLEDGE OF ELECTROSTATIC DISCHARGE
(ESD)
* 02/10 /
/KB
DEMO KNOWLEDGE OF TECHNICAL DIRECTIVES * 02/10 /
/KB
COMPLIANCE REPORT (MDR-4-1)
* 03/12 /
/SW
DEMO KNOWLEDGE OF CORROSION CONTROL TREATMENT
REPORT (MDR-11)
* 09/11 /
/SJ
DEMO KNOWLEDGE OF VIDS/MAF COPY 1 DAILY AUDIT
REPORT PART 2
* 03/12 /
/SW
DEMO KNOWLEDGE OF WHEN MALFUNCTION WAS
DISCOVERED REPORT (MDR-13)
* 09/11 /
/SJ
DEMO KNOWLEDGE OF MONTHLY PRODUCTION REPORT
(MDR-2)
* 03/12 /
/SW
DEMO KNOWLEDGE OF JOB CONTROL NUMBER
CONSOLIDATION REPORT (MDR-3)
* 03/12 /
/SW
DEMO KNOWLEDGE OF FOREIGN OBJECT DAMAGE (FOD)
REPORT (MDR-10)
* 09/11 /
/SJ
DEMO KNOWLEDGE OF VIDS/MAF COPY 1 DAILY AUDIT
REPORT PART 1
* 03/12 /
/SW
DEMO KNOWLEDGE OF INTERMEDIATE TECHNICAL
DIRECTIVE COMPLIANCE REPORT (MDR-4-2)
* 03/12 /
/SW
DEMO KNOWLEDGE OF MAINTENANCE ACTION BY
SYSTEM AND COMPONENT REPORT (MDR-6)
* 12/11 /
/SW
DEMO KNOWLEDGE OF NALDA HISTORICAL RETRIEVAL * 09/11 /
/SJ
DEMO KNOWLEDGE OF FAILED PARTS/PARTS REQUIRED
REPORT (MDR-8)
* 09/11 /
/SJ
LEVEL II LEVEL III
LEVEL II LEVEL III

Report:
Date Printed:
Page 23 of 300
11-Feb-16
MarTrngJkt
ITSS (MATMEP)
MAINTENANCE DATA REPORTS (MDR'S) (Cont.)
AUDIT PROGRAM
LEVEL IV MATMEP REQUIREMENTS
DEMO KNOWLEDGE OF COMPONENT REPAIR/BEYOND
CAPABILITY OF MAINTENANCE REPORT (MDR-7)
* 09/11 /
/SJ
DEMO KNOWLEDGE OF NO DEFECT REPORT (MDR-12) * 09/11 /
/SJ
DEMO KNOWLEDGE OF SPECIAL AUDITS * 02/10 /
/KB
DEMO KNOWLEDGE OF WORK CENTER AUDITS * 02/10 /
/KB
DEMO KNOWLEDGE OF PROGRAM AUDITS * 02/10 /
/KB
COMPLETE CORROSION CONTROL (MATMEP LEVEL I) * 03/12
/SW
COMPLETE CORROSION CONTROL (MATMEP LEVEL II) * 03/12
/SW
COMPLETE PRODUCTION/MATERIAL CONTROL (MATMEP
LEVEL I)
* 12/13
/GH
LEVEL II)
* 12/13
/GH
CALIBRATE CORROSION CONTROL (MATMEP LEVEL
III)
* 03/12
/SW
LEVEL III)
* 12/13
/GH
LEVEL II LEVEL III
LEVEL II LEVEL III
LEVEL II LEVEL III

Report:
Date Printed:
Page 24 of 300
11-Feb-16
MarTrngJkt
ITSS (MATMEP)
SAFETY PRECAUTIONS AND PROCEDURES AROUND THE WORK CENTER
PUBLICATIONS, DIAGRAMS, SKETCHES AND DRAWINGS
DEMONSTRATES/APPLIES GROUND OCCUPATIONAL
SAFETY & HEALTH PROGRAMS IN SPECIFIC AREAS:
PERSONAL PROTECTIVE EQUIPMENT (SAFETY/FLIGHT
CLOTHING, HEARING/EYE PROTECTION, ETC.)
* 10/09
/MR/RE
SAFETY PROCEDURES NEAR ELECTRICITY
* 10/09
/MR/RE
COMPOSITE MATERIAL SAFETY
* 11/09
/RE/RE
DEMO KNOWLEDGE OF GROUND OCCUPATIONAL SAFETY
& HEALTH PROGRAMS IN SPECIFIC AREAS: FIRST
AID PROCEDURES
* 02/09 /
/RE
HAZARDOUS MATERIAL/WASTE
* 10/09
/MR/RE
RECEIVE TRAINING ON GROUND OCCUPATIONAL
SAFETY PROCEDURES NEAR ELECTRICITY
* 02/12 /SW
PERSONAL PROTECTIVE EQUIPMENT (SAFETY/FLIGHT
CLOTHING, HEARING/EYE PROTECTION, ETC.)
* 02/12 /SW
& HEALTH PROGRAMS IN SPECIFIC AREAS: PERSONAL
PROTECTIVE EQUIPMENT (SAFETY/FLIGHT CLOTHING,
HEARING/EYE PROTECTION, ETC.)
* 02/09 /
/RE
DEMO KNOWLEDGE OF FIRE FIGHTING: TYPES OF
FIRE EXTINGUISHERS
* 02/09 /
/RE
COMPOSITE MATERIAL SAFETY
* 02/12 /SW
SAFETY MARKINGS
* 02/12 /SW
USE OF SOLVENTS/PAINTS/STRIPPERS/SEALANTS
(SHELF LIFE, MATERIAL SAFETY DATA SHEETS)
RECEIVE TRAINING ON FIRE FIGHTING: TYPES OF
FIRE EXTINGUISHERS
& HEALTH PROGRAMS IN SPECIFIC AREAS: SAFETY
MARKINGS
* 02/09 /
/RE
DEMONSTRATES/APPLIES FIRE FIGHTING: TYPES OF
FIRE EXTINGUISHERS
* 10/09
/MR/RE
FIRST AID PROCEDURES
* 10/09
/MR/RE
USE OF SOLVENTS/PAINTS/STRIPPERS/SEALANTS
(SHELF LIFE, MATERIAL SAFETY DATA SHEETS)
* 10/09
/MR/RE
FIRST AID PROCEDURES
& HEALTH PROGRAMS IN SPECIFIC AREAS: SAFETY
PROCEDURES NEAR ELECTRICITY
* 02/09 /
/RE
SAFETY MARKINGS
* 10/09
/MR/RE
RECEIVE TRAINING ON WORK UNIT CODE MANUAL
(WUC)
* 02/12 /SW
RECEIVE TRAINING ON NAVAL AVIATION
MAINTENANCE PROGRAM (NAMP)
* 02/12 /SW
RECEIVE TRAINING ON NAVAL AIR SYSTEM COMMAND
TECHNICAL MANUAL PROGRAM
* 02/12 /SW
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
LEVEL II LEVEL III
LEVEL II LEVEL III

Report:
Date Printed:
Page 25 of 300
11-Feb-16
MarTrngJkt
ITSS (MATMEP)
T-400 POWER SECTION ASSEMBLY
PERFORM INTERMEDIATE MAINTENANCE: R&R
COMPRESSOR INLET FAIRING ASSEMBLY
* 04/10
/MR/DM
PERFORM INTERMEDIATE MAINTENANCE: R&R LARGE
COMB CHAMBER EXIT DUCT ASSEMBLY
* 04/10
/MR/DM
PERFORM INTERMEDIATE MAINTENANCE: R&R CHECK
AND REGULATING VALVE ASSEMBLY
* 04/10
/MR/DM
PRESSURIZATION VALVE ASSEMBLY
* 04/10
/MR/DM
PERFORM INTERMEDIATE MAINTENANCE: R&R AIR
PRESSURE HEATED TUBE ASSEMBLY
* 04/10
/MR/DM
RECEIVE TRAINING ON R&R POWER TURBINE ROTOR
BALANCING ASSEMBLY
RECEIVE TRAINING ON R&R COMPRESSOR INLET CASE
ASSEMBLY
RECEIVE TRAINING ON R&R MANUAL FUEL CONTROL
UNIT
DEMO/APPLY KNOWLEDGE OF FAULT ISOLATION: FUEL
MANIFOLD ADAPTER ASSEMBLY
* 04/10
/MR/DM
PERFORM INTERMEDIATE MAINTENANCE: R&R #3 AND
#4 BEARING HOUSING ASSEMBLY
* 04/10
/MR/DM
PERFORM INTERMEDIATE MAINTENANCE: R&R POWER
TURBINE STATOR ASSEMBLY
* 04/10
/MR/DM
TURBINE ROTOR BALANCING ASSEMBLY
* 04/10
/MR/DM
PERFORM INTERMEDIATE MAINTENANCE: R&R MANUAL
FUEL CONTROL UNIT
* 04/10
/MR/DM
RECEIVE TRAINING ON R&R SINGLE PORT EXHAUST
DUCT ASSEMBLY
RECEIVE TRAINING ON R&R FUEL MANIFOLD INLET
ADAPTER ASSEMBLY
RECEIVE TRAINING ON R&R POWER SECTION AIR
TUBES
RECEIVE TRAINING ON R&R POWER SECTION FUEL
TUBES
RECEIVE TRAINING ON R&R POWER SECTION MODULE
PERFORM INTERMEDIATE MAINTENANCE: R&R FUEL
FLOW DIVIDER AND DUMP VALVE ASSEMBLY
* 04/10
/MR/DM
* 04/10
/MR/DM
PERFORM INTERMEDIATE MAINTENANCE: R&R SMALL
COMB CHAMBER EXIT DUCT ASSEMBLY
* 04/10
/MR/DM
COMPRESSOR INLET CASE ASSEMBLY
* 04/10
/MR/DM
PERFORM INTERMEDIATE MAINTENANCE: R&R OIL TO
FUEL HEAT EXCHANGER
* 04/10
/MR/DM
PERFORM INTERMEDIATE MAINTENANCE: R&R T-5
INTEGRAL THERMOCOUPLE HARNESS
* 04/10
/MR/DM
RECEIVE TRAINING ON FAULT ISOLATION:
COMPRESSOR BLEED AIR VALVE ASSEMBLY
RECEIVE TRAINING ON R&R FIRE SEAL ASSEMBLY
RECEIVE TRAINING ON R&R #3 AND #4 BEARING
HOUSING ASSEMBLY
RECEIVE TRAINING ON R&R FUEL FLOW DIVIDER AND
DUMP VALVE ASSEMBLY
RECEIVE TRAINING ON R&R LARGE COMB CHAMBER
EXIT DUCT ASSEMBLY
RECEIVE TRAINING ON R&R COMPRESSOR ROTOR
BALANCING ASSEMBLY
RECEIVE TRAINING ON R&R CENTER FIRE SEAL
ASSEMBLY
PERFORM INTERMEDIATE MAINTENANCE: R&R SINGLE
PORT EXHAUST DUCT ASSEMBLY
* 04/10
/MR/DM
PERFORM INTERMEDIATE MAINTENANCE: R&R GAS
GENERATOR CASE ASSEMBLY
* 04/10
/MR/DM
* 04/10
/MR/DM
INLET SCREEN
* 04/10
/MR/DM
RECEIVE TRAINING ON R&R POWER TURBINE STATOR
ASSEMBLY
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
LEVEL II LEVEL III

Report:
Date Printed:
Page 26 of 300
11-Feb-16
MarTrngJkt
ITSS (MATMEP)
T-400 POWER SECTION ASSEMBLY (Cont.)
REPAIR INTERMEDIATE MAINTENANCE: COMPRESSOR
BLEED AIR VALVE ASSEMBLY
* 04/10
/MR/DM
SECTION MODULE
* 04/10
/MR/DM
RECEIVE TRAINING ON R&R POWER TURBINE STATOR
HOUSING
RECEIVE TRAINING ON R&R GAS GENERATOR CASE
ASSEMBLY
RECEIVE TRAINING ON R&R SPARK IGNITER
RECEIVE TRAINING ON R&R POWER SECTION OIL
TUBES
DEMO/APPLY KNOWLEDGE OF THEORY OF OPERATION:
T400 POWER SECTION ASSEMBLY
* 04/10
/MR/DM
DEMO/APPLY KNOWLEDGE OF FAULT ISOLATION:
* 04/10
/MR/DM
COMPRESSOR TURBINE DISK BALANCING ASSEMBLY
* 04/10
/MR/DM
COMBUSTION CHAMBER LINER ASSEMBLY
* 04/10
/MR/DM
PERFORM INTERMEDIATE MAINTENANCE: R&R TURBINE
VANE RING ASSEMBLY
* 04/10
/MR/DM
COMPRESSOR ROTOR BALANCING ASSEMBLY
* 04/10
/MR/DM
PERFORM INTERMEDIATE MAINTENANCE: R&R CENTER
FIRE SEAL ASSEMBLY
* 04/10
/MR/DM
ACCESSORY GEARBOX ASSEMBLY
* 04/10
/MR/DM
RECEIVE TRAINING ON FAULT ISOLATION: FUEL
RECEIVE TRAINING ON R&R FUEL MANIFOLD ADAPTER
ASSEMBLY
RECEIVE TRAINING ON R&R TURBINE VANE RING
ASSEMBLY
RECEIVE TRAINING ON R&R COMPRESSOR TURBINE
SHROUD ASSEMBLY
RECEIVE TRAINING ON R&R AIR INLET SCREEN
COMPRESSOR TURBINE SHROUD ASSEMBLY
* 04/10
/MR/DM
AUTOMATIC FUEL CONTROL UNIT
* 04/10
/MR/DM
PUMP
* 04/10
/MR/DM
RECEIVE TRAINING ON THEORY OF OPERATION: T400
POWER SECTION ASSEMBLY
* 02/12 /SW
PERFORM INTERMEDIATE MAINTENANCE: R&R BOTTOM
FRONT FIRE SEAL ASSEMBLY
* 04/10
/MR/DM
PERFORM INTERMEDIATE MAINTENANCE: R&R TOP
FRONT FIRE SEAL ASSEMBLY
* 04/10
/MR/DM
PERFORM INTERMEDIATE MAINTENANCE: R&R T-5
BIAS BOX
* 04/10
/MR/DM
SECTION OIL TUBES
* 04/10
/MR/DM
RECEIVE TRAINING ON R&R POWER TURBINE AND
EXHAUST ASSEMBLY
RECEIVE TRAINING ON R&R COMPRESSOR INLET
FAIRING ASSEMBLY
RECEIVE TRAINING ON R&R ACCESSORY GEARBOX
ASSEMBLY
RECEIVE TRAINING ON R&R FUEL PUMP
RECEIVE TRAINING ON R&R BOTTOM FRONT FIRE
SEAL ASSEMBLY
PERFORM INTERMEDIATE MAINTENANCE: R&R FIRE
SEAL ASSEMBLY
* 04/10
/MR/DM
TURBINE STATOR HOUSING
* 04/10
/MR/DM
MANIFOLD INLET ADAPTER ASSEMBLY
* 04/10
/MR/DM
PERFORM INTERMEDIATE MAINTENANCE: R&R SPARK
IGNITER
* 04/10
/MR/DM
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
LEVEL II LEVEL III

Report:
Date Printed:
Page 27 of 300
11-Feb-16
MarTrngJkt
ITSS (MATMEP)
T-400 POWER SECTION ASSEMBLY (Cont.)
T-400 REDUCTION GEARBOX ASSEMBLY
T-700 ENGINE ASSEMBLY
SECTION AIR TUBES
* 04/10
/MR/DM
SECTION FUEL TUBES
* 04/10
/MR/DM
RECEIVE TRAINING ON R&R COMPRESSOR BLEED AIR
VALVE ASSEMBLY
RECEIVE TRAINING ON R&R COMPRESSOR TURBINE
DISK BALANCING ASSEMBLY
RECEIVE TRAINING ON R&R COMBUSTION CHAMBER
LINER ASSEMBLY
RECEIVE TRAINING ON R&R SMALL COMB CHAMBER
EXIT DUCT ASSEMBLY
RECEIVE TRAINING ON R&R AUTOMATIC FUEL
CONTROL UNIT
RECEIVE TRAINING ON R&R AIR PRESSURE HEATED
TUBE ASSEMBLY
RECEIVE TRAINING ON R&R TOP FRONT FIRE SEAL
ASSEMBLY
TURBINE AND EXHAUST ASSEMBLY
* 04/10
/MR/DM
PERFORM INTERMEDIATE MAINTENANCE: R&R GAS
GENERATOR ASSEMBLY
* 04/10
/MR/DM
PERFORM INTERMEDIATE MAINTENANCE: R&R FREE
TURBINE GOVERNOR
* 04/10
/MR/DM
REDUCTION GEARBOX ASSEMBLY
* 04/10
/MR/DM
RECEIVE TRAINING ON THEORY OF OPERATION:
REDUCTION GEARBOX ASSEMBLY
* 02/12 /SW
PERFORM INTERMEDIATE MAINTENANCE: R&R TORQUE
CONTROL ASSEMBLY
* 04/10
/MR/DM
PERFORM INTERMEDIATE MAINTENANCE: R&R BARE
ASSEMBLY REDUCTION GEARBOX
* 04/10
/MR/DM
RECEIVE TRAINING ON INTERMEDIATE MAINTENANCE:
R&R ACCESSORY DRIVE GEARBOX ASSEMBLY
* 02/12 /SW
R&R AXIS B CARBON SEAL
* 02/12 /SW
R&R PARTICLE SEPARATOR BLOWER
* 02/12 /SW
R&R STAGE 1 TURBINE NOZZLE
* 02/12 /SW
PERFORM INTERMEDIATE MAINTENANCE: R&R AXIS B
CARBON SEAL
* 09/09
/MR/RE
PARTICLE SEPARATOR BLOWER
* 09/09
/MR/RE
RECEIVE TRAINING ON R&R ACCESSORY DRIVE
GEARBOX ASSEMBLY
RECEIVE TRAINING ON R&R AXIS E CARBON SEAL
PERFORM INTERMEDIATE MAINTENANCE: R&R AXIS E
CARBON SEAL
* 09/09
/MR/RE
R&R AXIS A OIL NOZZLE
* 02/12 /SW
R&R GAS GENERATOR ROTOR ASSEMBLY
* 02/12 /SW
R&R GAS GENERATOR STATOR ASSEMBLY
* 02/12 /SW
ACCESSORY SECTION
* 09/09
/MR/RE
PERFORM R&R HOT SECTION * 02/09
/MR/RE
R&R ACCESSORY SECTION
* 02/12 /SW
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
LEVEL II LEVEL III
LEVEL II LEVEL III
LEVEL II LEVEL III

Report:
Date Printed:
Page 28 of 300
11-Feb-16
MarTrngJkt
ITSS (MATMEP)
T-700 ENGINE ASSEMBLY (Cont.)
T-700 COLD SECTION MODULE
R&R COMBUSTION LINER
* 02/12 /SW
ACCESSORY DRIVE GEARBOX ASSEMBLY
* 09/09
/MR/RE
PERFORM R&R STAGE 1 TURBINE NOZZLE * 02/09
/MR/RE
PERFORM R&R GAS GENERATOR STATOR ASSEMBLY * 02/09
/MR/RE
RECEIVE TRAINING ON R&R AXIS A OIL NOZZLE
RECEIVE TRAINING ON R&R RADIAL DRIVESHAFT
ASSEMBLY
RECEIVE TRAINING ON R&R STAGE 1 TURBINE
NOZZLE
R&R RADIAL DRIVESHAFT ASSEMBLY
* 02/12 /SW
T700 ENGINE ASSEMBLY
* 09/09
/MR/RE
RECEIVE TRAINING ON R&R AXIS B CARBON SEAL
RECEIVE TRAINING ON R&R GAS GENERATOR STATOR
ASSEMBLY
R&R AXIS E CARBON SEAL
* 02/12 /SW
DEMO KNOWLEDGE OF THEORY OF OPERATION: T700
ENGINE ASSEMBLY
* 02/09 /
/RE
PERFORM R&R RADIAL DRIVESHAFT ASSEMBLY * 02/09
/MR/RE
ENGINE ASSEMBLY
* 02/12 /SW
R&R AXIS G CARBON SEAL
* 02/12 /SW
R&R HOT SECTION
* 02/12 /SW
PERFORM R&R AXIS G CARBON SEAL * 02/09
/MR/RE
PERFORM R&R GAS GENERATOR ROTOR ASSEMBLY * 02/09
/MR/RE
RECEIVE TRAINING ON R&R AXIS G CARBON SEAL
RECEIVE TRAINING ON R&R GAS GENERATOR ROTOR
ASSEMBLY
RECEIVE TRAINING ON R&R COMBUSTION LINER
PERFORM INTERMEDIATE MAINTENANCE: R&R AXIS A
OIL NOZZLE
* 09/09
/MR/RE
PERFORM R&R COMBUSTION LINER * 02/09
/MR/RE
RECEIVE TRAINING ON R&R ACCESSORY SECTION
RECEIVE TRAINING ON R&R PARTICLE SEPARATOR
BLOWER
RECEIVE TRAINING ON R&R HOT SECTION
PERFORM INTERMEDIATE MAINTENANCE: R&R NO.2
ROLLER BEARING
* 10/09
/MR/RE
TAKEOFF BEVEL GEAR
* 09/09
/MR/RE
BEARING OUTER RACE
* 09/09
/MR/RE
RECEIVE TRAINING ON R&R ACTUATING SYSTEM
LINKAGE ASSEMBLY
RECEIVE TRAINING ON R&R POWER TAKEOFF DRIVE
ASSEMBLY
RECEIVE TRAINING ON R&R SWIRL PLATE
PERFORM R&R NO.3 BEARING SELF LOCKING NUT * 02/09
/MR/RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
LEVEL II LEVEL III
LEVEL II LEVEL III

Report:
Date Printed:
Page 29 of 300
11-Feb-16
MarTrngJkt
ITSS (MATMEP)
T-700 COLD SECTION MODULE (Cont.)
PERFORM INTERMEDIATE MAINTENANCE: R&R SWIRL
PLATE
* 09/09
/MR/RE
BEARING
* 10/09
/MR/RE
RECEIVE TRAINING ON R&R NO.1 CARBON SEAL
RECEIVE TRAINING ON R&R NO.1 BEARING ROTATING
SEAL
RECEIVE TRAINING ON R&R GAS GENERATOR TURBINE
SHAFT
RECEIVE TRAINING ON R&R NO.4 BEARING SUPPORT
PERFORM R&R COLD SECTION MODULE * 02/09
/MR/RE
PERFORM R&R NO.1 CARBON SEAL * 02/09
/MR/RE
PERFORM INTERMEDIATE MAINTENANCE: R&R SCROLL
CASE
* 10/09
/MR/RE
RECEIVE TRAINING ON R&R COMPRESSOR ROTOR
RECEIVE TRAINING ON R&R COMPRESSOR DISCHARGE
STATIONARY AIR SEAL AND E SEAL
RECEIVE TRAINING ON R&R NO.4 BEARING
COLD SECTION MODULE
* 02/12 /SW
PERFORM R&R ACTUATING SYSTEM LINKAGE ASSEMBLY * 02/09
/MR/RE
PERFORM R&R NO.1 BEARING ROTATING SEAL * 02/09
/MR/RE
DIFFUSER AND MID-FRAME CASING ASSEMBLY
* 09/09
/MR/RE
MAINFRAME ASSEMBLY
* 09/09
/MR/RE
PERFORM R&R NO.4 BEARING SUPPORT * 02/09
/MR/RE
PERFORM R&R NO.4 BEARING * 02/09
/MR/RE
RECEIVE TRAINING ON R&R COMPRESSOR STATOR
ASSEMBLY
RECEIVE TRAINING ON R&R MAINFRAME ASSEMBLY
BEARING FORWARD OIL SEAL
* 09/09
/MR/RE
RECEIVE TRAINING ON R&R PARTICLE SEPARATOR
RECEIVE TRAINING ON R&R NO.3 BEARING PRIME
OIL NOZZLE
RECEIVE TRAINING ON R&R FRONT FRAME ASSEMBLY
RECEIVE TRAINING ON R&R NO.3 BEARING
COLD SECTION MODULE
* 02/09 /
/RE
PERFORM R&R IGV ACTUATING RING * 02/09
/MR/RE
PARTICLE SEPARATOR
* 09/09
/MR/RE
PERFORM R&R A-SUMP OUTPUT SHAFT ASSEMBLY * 02/09
/MR/RE
PERFORM R&R COMPRESSOR STATOR ASSEMBLY * 02/09
/MR/RE
COMPRESSOR ROTOR
* 09/09
/MR/RE
PERFORM R&R COMPRESSOR DISCHARGE STATIONARY
AIR SEAL AND E SEAL
* 02/09
/MR/RE
RECEIVE TRAINING ON R&R COLD SECTION MODULE
RECEIVE TRAINING ON R&R A-SUMP OUTPUT SHAFT
ASSEMBLY
RECEIVE TRAINING ON R&R POWER TAKEOFF GEAR
SPACER AND NO.3 BEARING FWD, & AFT INNER
RACES
RECEIVE TRAINING ON R&R DIFFUSER AND MID-
FRAME CASING ASSEMBLY
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
LEVEL II LEVEL III

Report:
Date Printed:
Page 30 of 300
11-Feb-16
MarTrngJkt
ITSS (MATMEP)
T-700 COLD SECTION MODULE (Cont.)
T-700 POWER TURBINE MODULE
RECEIVE TRAINING ON R&R NO.4 BEARING FORWARD
OIL SEAL
RECEIVE TRAINING ON R&R NO.3 BEARING SUPPORT
RECEIVE TRAINING ON R&R OUTER BALANCE PISTON
SEAL
T700 COLD SECTION MODULE
* 08/09
/MR/RE
DUPLEX BALL BEARING
* 10/09
/MR/RE
BEARING PRIME OIL NOZZLE
* 09/09
/MR/RE
PERFORM INTERMEDIATE MAINTENANCE: R&R FRONT
FRAME ASSEMBLY
* 09/09
/MR/RE
RECEIVE TRAINING ON R&R OUTPUT SHAFT
RECEIVE TRAINING ON R&R NO.2 ROLLER BEARING
PERFORM R&R OUTPUT SHAFT * 02/09
/MR/RE
PERFORM INTERMEDIATE MAINTENANCE: R&R NO.1&2
BEARING HOUSING
* 09/09
/MR/RE
PERFORM R&R POWER TAKEOFF DRIVE ASSEMBLY * 02/09
/MR/RE
PERFORM R&R POWER TAKEOFF GEAR SPACER AND NO.
3 BEARING FWD, & AFT INNER RACES
* 02/09
/MR/RE
PERFORM R&R GAS GENERATOR TURBINE SHAFT * 02/09
/MR/RE
BEARING OUTER RACE
* 10/09
/MR/RE
BEARING SUPPORT
* 10/09
/MR/RE
PERFORM INTERMEDIATE MAINTENANCE: R&R OUTER
BALANCE PISTON SEAL
* 10/09
/MR/RE
RECEIVE TRAINING ON R&R IGV ACTUATING RING
RECEIVE TRAINING ON R&R NO.1&2 BEARING
HOUSING
RECEIVE TRAINING ON R&R NO.1 DUPLEX BALL
BEARING
RECEIVE TRAINING ON R&R NO.3 BEARING SELF
LOCKING NUT
RECEIVE TRAINING ON R&R POWER TAKEOFF BEVEL
GEAR
RECEIVE TRAINING ON R&R NO.4 BEARING OUTER
RACE
RECEIVE TRAINING ON R&R NO.3 BEARING OUTER
RACE
RECEIVE TRAINING ON R&R SCROLL CASE
RECEIVE TRAINING ON R&R POWER TURBINE SHAFT
RECEIVE TRAINING ON R&R NO.5 ROLLER BEARING
BALL BEARING
* 08/09
/MR/RE
RECEIVE TRAINING ON R&R POWER TURBINE ROTOR
ASSEMBLY
* 08/09
/MR/RE
PERFORM INTERMEDIATE MAINTENANCE: R&R C-SUMP
HOUSING
* 08/09
/MR/RE
PERFORM INTERMEDIATE MAINTENANCE: R&R EXHAUST
FRAME
* 08/09
/MR/RE
RECEIVE TRAINING ON R&R C-SUMP HOUSING
RECEIVE TRAINING ON THEORY OF OPERATION: T-
700 POWER TURBINE MODULE
* 02/12 /SW
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
LEVEL II LEVEL III
LEVEL II LEVEL III

Report:
Date Printed:
Page 31 of 300
11-Feb-16
MarTrngJkt
ITSS (MATMEP)
T-700 POWER TURBINE MODULE (Cont.)
T-700 FUEL SYSTEM
T-700 ELECTRICAL SYSTEM
DEMO KNOWLEDGE OF THEORY OF OPERATION: T-700
POWER TURBINE MODULE
* 02/09 /
/RE
PERFORM R&R POWER TURBINE SHAFT * 02/09
/MR/RE
RECEIVE TRAINING ON R&R EXHAUST FRAME
PERFORM R&R POWER TURBINE ROTOR ASSEMBLY * 02/09
/MR/RE
RECEIVE TRAINING ON R&R NO.6 BALL BEARING
ROLLER BEARING
* 08/09
/MR/RE
RECEIVE TRAINING ON R&R T-700 POWER TURBINE
MODULE
RECEIVE TRAINING ON R&R TURBINE CASE
PERFORM R&R T-700 POWER TURBINE MODULE * 02/09
/MR/RE
PERFORM INTERMEDIATE MAINTENANCE: R&R TURBINE
CASE
* 08/09
/MR/RE
RECEIVE TRAINING ON R&R FUEL INJECTOR
ASSEMBLY
INJECTOR ASSEMBLY
* 09/09
/MR/RE
PRESSURE SWITCH
* 09/09
/MR/RE
RECEIVE TRAINING ON R&R FUEL BOOST PUMP
T700 FUEL SYSTEM
* 09/09
/MR/RE
RECEIVE TRAINING ON R&R OVERSPEED AND DRAIN
VALVE
RECEIVE TRAINING ON R&R FUEL PRESSURE SWITCH
FUEL SYSTEM
* 02/09 /
/RE
PERFORM R&R HYDRO-MECHANICAL UNIT * 02/09
/MR/RE
RECEIVE TRAINING ON R&R FUEL FILTER ASSEMBLY
OVERSPEED AND DRAIN VALVE
* 09/09
/MR/RE
RECEIVE TRAINING ON R&R HYDRO-MECHANICAL UNIT
BOOST PUMP
* 09/09
/MR/RE
RECEIVE TRAINING ON R&R FUEL FILTER ELEMENT
FUEL SYSTEM
* 02/12 /SW
PERFORM R&R FUEL FILTER ASSEMBLY * 09/09 /
/RE
FILTER ELEMENT
* 09/09
/MR/RE
ELECTRICAL SYSTEM
* 02/12 /SW
PERFORM INTERMEDIATE MAINTENANCE: R&R BLUE
ELECTRICAL CABLE
* 08/09
/MR/RE
THERMOCOUPLE ASSEMBLY
* 09/09
/MR/RE
PERFORM INTERMEDIATE MAINTENANCE: R&R TORQUE
& OVERSPEED SENSOR
* 10/09
/MR/RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
LEVEL II LEVEL III
LEVEL II LEVEL III
LEVEL II LEVEL III

Report:
Date Printed:
Page 32 of 300
11-Feb-16
MarTrngJkt
ITSS (MATMEP)
T-700 ELECTRICAL SYSTEM (Cont.)
T-700 AIR SYSTEM
RECEIVE TRAINING ON R&R GREEN ELECTRICAL
CABLE
RECEIVE TRAINING ON R&R ALTERNATOR STATOR
RECEIVE TRAINING ON R&R IGNITER PLUGS
RECEIVE TRAINING ON R&R THERMOCOUPLE ASSEMBLY
PERFORM R&R IGNITER PLUGS * 02/09
/MR/RE
RECEIVE TRAINING ON R&R IGNITION EXCITER
ASSEMBLY
PERFORM INTERMEDIATE MAINTENANCE: R&R GREEN
ELECTRICAL CABLE
* 08/09
/MR/RE
ELECTRICAL IGNITION LEAD
* 08/09
/MR/RE
RECEIVE TRAINING ON R&R NP SENSOR
RECEIVE TRAINING ON R&R HISTORY RECORDER
RECEIVE TRAINING ON R&R YELLOW ELECTRICAL
CABLE
RECEIVE TRAINING ON R&R ALTERNATOR ROTOR
PERFORM INTERMEDIATE MAINTENANCE: R&R YELLOW
ELECTRICAL CABLE
* 08/09
/MR/RE
ALTERNATOR STATOR
* 09/09
/MR/RE
RECEIVE TRAINING ON R&R BLUE ELECTRICAL CABLE
RECEIVE TRAINING ON R&R ELECTRICAL IGNITION
LEAD
IGNITION EXCITER ASSEMBLY
* 08/09
/MR/RE
RECEIVE TRAINING ON R&R TORQUE & OVERSPEED
SENSOR
ELECTRICAL SYSTEM
* 02/09 /
/RE
T700 ELECTRICAL SYSTEM
* 09/09
/MR/RE
PERFORM INTERMEDIATE MAINTENANCE: R&R HISTORY
RECORDER
* 09/09
/MR/RE
PERFORM R&R ALTERNATOR ROTOR * 02/09
/MR/RE
PERFORM INTERMEDIATE MAINTENANCE: R&R NP
SENSOR
* 09/09
/MR/RE
PERFORM INTERMEDIATE MAINTENANCE: R&R T2
SENSING TUBE
* 07/09
/MR/RE
PERFORM INTERMEDIATE MAINTENANCE: PULL CHECK
OF ANTI-ICE START/BLEED AIR VALVE
* 08/09
/MR/RE
RECEIVE TRAINING ON R&R ANTI-ICE/START BLEED
AIR VALVE
RECEIVE TRAINING ON R&R T2 SENSING TUBE
PERFORM INTERMEDIATE MAINTENANCE: R&R P3 TUBE * 07/09
/MR/RE
RECEIVE TRAINING ON R&R AIR TUBES
PERFORM INTERMEDIATE MAINTENANCE: R&R ANTI-
ICE/START BLEED AIR VALVE
* 07/09
/MR/RE
RECEIVE TRAINING ON R&R P3 TUBE
RECEIVE TRAINING ON PULL CHECK OF ANTI-ICE
START/BLEED AIR VALVE
TUBES
* 08/09
/MR/RE
AIR SYSTEM
* 02/12 /SW
T700 AIR SYSTEM
* 07/09
/MR/RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
LEVEL II LEVEL III
LEVEL II LEVEL III

Report:
Date Printed:
Page 33 of 300
11-Feb-16
MarTrngJkt
ITSS (MATMEP)
T-700 AIR SYSTEM (Cont.)
T-700 LUBRICATION SYSTEM
DUTY DESCRIPTION
AIR SYSTEM
* 02/09 /
/RE
RECEIVE TRAINING ON R&R B-SUMP DELTA PRESSURE
DELTA TUBE
RECEIVE TRAINING ON R&R OIL COOLER
RECEIVE TRAINING ON R&R OIL PRESSURE
TRANSMITTER
RECEIVE TRAINING ON R&R ELECTRICAL CHIP
DETECTOR
RECEIVE TRAINING ON R&R OIL LUBE AND SCAVENGE
PUMP
LUBRICATION SYSTEM
* 02/12 /SW
RECEIVE TRAINING ON R&R OIL TUBES
T700 LUBRICATION SYSTEM
* 08/09
/MR/RE
RECEIVE TRAINING ON R&R OIL FILTER ASSEMBLY
LUBRICATION SYSTEM
* 02/09 /
/RE
SIGN OFF TASK AREA T-700 COLD SECTION MODULE * 02/12 /SW * 02/09 /
/RE
SIGN OFF TASK AREA CORROSION CONTROL * 02/09 /
/RE
* 04/10 /
/DM
SIGN OFF TASK AREA SUPPORT/SPECIAL EQUIPMENT * 01/10 /
/RE
SIGN OFF TASK AREA T-700 LUBRICATION SYSTEM * 02/12 /SW * 02/09 /
/RE
SIGN OFF TASK AREA SCHEDULED/UNSCHEDULED
INSPECTIONS
* 04/10 /
/DM
SIGN OFF TASK AREA HELICOPTER PUBLICATIONS,
DIAGRAMS, SKETCHES AND DRAWINGS
* 02/12 /SW * 04/10 /
/DM
SIGN OFF TASK AREA T-700 ELECTRICAL SYSTEM * 02/12 /SW * 02/09 /
/RE
SIGN OFF TASK AREA PRECISION MEASURING
EQUIPMENT
* 04/10 /
/DM
SIGN OFF TASK AREA TECHNICAL DIRECTIVES
CHANGES/BULLETINS
* 11/09 /
/RE
SIGN OFF TASK AREA SAFETY PRECAUTIONS AND
PROCEDURES AROUND THE WORK CENTER
* 02/12 /SW * 11/09 /
/RE
SIGN OFF TASK AREA T-700 POWER TURBINE MODULE * 02/12 /SW * 02/09 /
/RE
SIGN OFF TASK AREA T-700 FUEL SYSTEM * 02/12 /SW * 02/09 /
/RE
SIGN OFF TASK AREA T-400 POWER SECTION
ASSEMBLY
* 02/12 /SW * 04/10 /
/DM
SIGN OFF TASK AREA T-400 REDUCTION GEARBOX
ASSEMBLY
* 02/12 /SW * 04/10 /
/DM
SIGN OFF TASK AREA T-700 ENGINE ASSEMBLY * 02/12 /SW * 02/09 /
/RE
SIGN OFF TASK AREA T-700 AIR SYSTEM * 02/12 /SW * 02/09 /
/RE
* 02/09 /
/RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
LEVEL II LEVEL III
LEVEL II LEVEL III
LEVEL II LEVEL III

Report:
Date Printed:
Page 34 of 300
11-Feb-16
MarTrngJkt
ITSS (MATMEP)
SIGN OFF
HELICOPTER PUBLICATIONS, DIAGRAMS, SKETCHES AND DRAWINGS
COMPLETE HELICOPTER POWER PLANT MECHANIC T-
400/T-700 ENGINE (6124 MATMEP LEVEL I)(I
LEVEL)
* 02/12 /SW
400/T-700 ENGINE (6124 MATMEP LEVEL IV)(I
LEVEL)
* 06/11
/SW
400/T-700 ENGINE (6124 MATMEP LEVEL III)(I
LEVEL)
* 04/10 /
/RE
RECEIVE TRAINING ON MAINTENANCE INSTRUCTION
MANUALS (MIM'S): T700-GE-401 ENGINE
TURBOSHAFT INTERMEDIATE MAINTENANCE, VOLUME
II
DEMO KNOWLEDGE OF NAVAL AIR SYSTEM COMMAND
TECHNICAL MANUAL PROGRAM
* 02/09 /
/RE
DEMO KNOWLEDGE OF SUPPORT EQUIPMENT CORROSION
CONTROL MANUAL
* 02/09 /
/RE
DEMO KNOWLEDGE OF INDIVIDUAL COMPONENTS
REPAIR LIST (ICRL)
* 02/09 /
/RE
DEMO/APPLY KNOWLEDGE OF AVIATION HOSE AND
TUBE MANUAL
* 11/09
/RE/RE
DEMO/APPLY KNOWLEDGE OF MAINTENANCE
INSTRUCTION MANUALS (MIM'S): ENGINE
TURBOSHAFT TWIN POWER SECTION MIM
* 11/09
/RE/RE
DEMO KNOWLEDGE OF MAINTENANCE INSTRUCTION
MANUALS (MIM'S): AH-1W MIM
* 02/09 /
/RE
DEMO/APPLY KNOWLEDGE OF CONDITIONAL
INSPECTIONS
* 10/09
/MR/RE
TURBOSHAFT INTERMEDIATE MAINTENANCE, VOLUME I
RECEIVE TRAINING ON ILLUSTRATED PARTS
BREAKDOWN MANUALS (IPB): T700-GE-401 ENGINE
TURBOSHAFT IPB
DEMO KNOWLEDGE OF NAVAL AVIATION MAINTENANCE
PROGRAM (NAMP)
* 02/09 /
/RE
DEMO/APPLY KNOWLEDGE OF OCCUPATIONAL SAFETY &
HEALTH ADMINISTRATION MANUAL
* 11/09
/RE/RE
DEMO/APPLY KNOWLEDGE OF SAFETY REQUIREMENTS
FOR NAVAL AVIATION SHORE ACTIVITIES/AFLOAT
ACTIVITIES
* 11/09
/RE/RE
DEMO KNOWLEDGE OF PRESERVATION OF AIRCRAFT
ENGINES
* 02/09 /
/RE
DEMO/APPLY KNOWLEDGE OF PRESERVATION OF
AIRCRAFT ENGINES
* 10/09
/MR/RE
MANUALS (MIM'S): ENGINE TURBOSHAFT TWIN POWER
SECTION MIM
DEMO/APPLY KNOWLEDGE OF SUPPORT EQUIPMENT
CORROSION CONTROL MANUAL
* 10/09
/RE/RE
DEMO/APPLY KNOWLEDGE OF AVIATION HYDRAULICS
MANUAL
* 10/09
/MR/RE
INSTRUCTION MANUALS (MIM'S): T700-GE-401
ENGINE TURBOSHAFT INTERMEDIATE MAINTENANCE,
VOLUME II
* 08/09
/MR/RE
DEMO/APPLY KNOWLEDGE OF ILLUSTRATED PARTS
BREAKDOWN MANUALS (IPB): ENGINE TURBOSHAFT
TWIN POWER SECTION IPB
* 01/10
/MR/KB
BREAKDOWN MANUALS (IPB): AH-1W IPB
* 10/09
/MR/RE
DEMO KNOWLEDGE OF STANDARD PRACTICE MANUAL * 02/09 /
/RE
RECEIVE TRAINING ON ILLUSTRATED PARTS
BREAKDOWN MANUALS (IPB): ENGINE TURBOSHAFT
TWIN POWER SECTION IPB
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
LEVEL II LEVEL III
LEVEL II LEVEL III

Report:
Date Printed:
Page 35 of 300
11-Feb-16
MarTrngJkt
ITSS (MATMEP)
HELICOPTER PUBLICATIONS, DIAGRAMS, SKETCHES AND DRAWINGS (Cont.)
DEMO KNOWLEDGE OF ILLUSTRATED PARTS BREAKDOWN
MANUALS (IPB): T700-GE-401 ENGINE TURBOSHAFT
IPB
* 02/09 /
/RE
BREAKDOWN MANUALS (IPB): UH-1N IPB
* 01/10
/MR/RE
DEMO KNOWLEDGE OF MAINTENANCE REQUIREMENT
CARDS (MRC'S): T700 GE-401 QUICK ENGINE
CHANGE ASSEMBLY
* 02/09 /
/RE
DEMO KNOWLEDGE OF CONDITIONAL INSPECTIONS * 02/09 /
/RE
DEMO/APPLY KNOWLEDGE OF NAVAL AVIATION
MAINTENANCE PROGRAM (NAMP)
* 10/09
/MR/RE
DEMO KNOWLEDGE OF AVIATION HYDRAULICS MANUAL * 02/09 /
/RE
DEMO KNOWLEDGE OF ILLUSTRATED PARTS BREAKDOWN
MANUALS (IPB): AH-1W IPB
* 02/09 /
/RE
DEMO/APPLY KNOWLEDGE OF NAVAL AIR SYSTEM
COMMAND TECHNICAL MANUAL PROGRAM
* 11/09
/RE/RE
DEMO/APPLY KNOWLEDGE OF WEAPONS SYSTEMS
CLEANING AND CORROSION CONTROL MANUAL
* 11/09
/RE/RE
DEMO/APPLY KNOWLEDGE OF INDIVIDUAL COMPONENTS
REPAIR LIST (ICRL)
* 10/09
/MR/RE
DEMO/APPLY KNOWLEDGE OF MASTER COMPONENTS
REPAIR LIST (MCRL)
* 11/09
/RE/RE
INSTRUCTION MANUALS (MIM'S): T700-GE-401
ENGINE TURBOSHAFT INTERMEDIATE MAINTENANCE,
VOLUME I
* 11/09
/RE/RE
INSTRUCTION MANUALS (MIM'S): AH-1W MIM
* 10/09
/MR/RE
REQUIREMENT CARDS (MRC'S): T400-CP-400
MAINTENANCE REQUIREMENT CARDS
* 01/10
/MR/RE
RECEIVE TRAINING ON T700_GE-401
TROUBLESHOOTING
TURBOSHAFT INTERMEDIATE MAINTENANCE, VOLUME I
* 02/09 /
/RE
TURBOSHAFT INTERMEDIATE MAINTENANCE, VOLUME
II
* 02/09 /
/RE
BREAKDOWN MANUALS (IPB): T700-GE-401 ENGINE
TURBOSHAFT IPB
* 11/09
/RE/RE
REQUIREMENT CARDS (MRC'S): SEQUENCE CONTROL
CHART
* 12/09
/MR/RE
REQUIREMENT CARDS (MRC'S): T700 GE-401 QUICK
ENGINE CHANGE ASSEMBLY
* 10/09
/MR/RE
DEMO KNOWLEDGE OF T700_GE-401 TROUBLESHOOTING * 02/09 /
/RE
DEMO/APPLY KNOWLEDGE OF T700_GE-401
TROUBLESHOOTING
* 10/09
/MR/RE
DEMO/APPLY KNOWLEDGE OF STANDARD PRACTICE
MANUAL
* 10/09
/MR/RE
RECEIVE TRAINING ON CONDITIONAL INSPECTIONS
DEMO KNOWLEDGE OF WEAPONS SYSTEMS CLEANING
AND CORROSION CONTROL MANUAL
* 02/09 /
/RE
DEMO/APPLY KNOWLEDGE OF WORK UNIT CODE MANUAL
(WUC)
* 10/09
/MR/RE
INSTRUCTION MANUALS (MIM'S): UH-1N MIM
* 11/09
/MR/RE
REQUIREMENT CARDS (MRC'S): ENGINE COMPLETE
REPAIR REQUIREMENT CARDS
* 10/09
/MR/RE
* 02/09 / /RE
* 02/09 / /RE
LEVEL II LEVEL III

Report:
Date Printed:
Page 36 of 300
11-Feb-16
MarTrngJkt
ITSS (MATMEP)
PRECISION MEASURING EQUIPMENT
CORROSION CONTROL
T-400 ENGINE ASSEMBLY TROUBLESHOOTING TECHNIQUES/STEPS
RECEIVE TRAINING ON COMPRESSOR IMPELLER
CLEARANCE GAUGE PLATE
OPERATE GAS GENERATOR STATOR RUN-OUT FIXTURE * 02/09
/MR/RE
OPERATE COMPRESSOR IMPELLER CLEARANCE GAUGE
PLATE
* 11/09
/RE/RE
OPERATE POWER TURBINE SHROUD RADIUS GAUGE * 04/10
/MR/DM
OPERATE JET CALIBRATION ANALYZER, (T700) * 11/09
/RE/RE
OPERATE OIL FLOW TESTER * 08/09
/MR/RE
OPERATE COMPRESSOR TURBINE SHROUD RADIUS
GAUGE
* 04/10
/MR/DM
OPERATE COMPRESSOR IMPELLER CLEARANCE CHECK * 11/09
/RE/RE
RECEIVE TRAINING ON GAS GENERATOR STATOR RUN-
OUT FIXTURE
RECEIVE TRAINING ON BACKLASH FIXTURE
OPERATE POWER TAKEOFF DRIVE GEAR * 02/09
/MR/RE
RECEIVE TRAINING ON POWER TAKEOFF DRIVE GEAR
OPERATE CALIBRATOR SEAL TESTER * 11/09
/RE/RE
RECEIVE TRAINING ON OIL FLOW TESTER
RECEIVE TRAINING ON COMPRESSOR IMPELLER
CLEARANCE CHECK
OPERATE BACKLASH FIXTURE * 02/09
/MR/RE
OPERATE TORQUE WRENCH MULTIPLIER * 02/09
/MR/RE
OPERATE FUEL MANIFOLD TESTER * 11/09
/RE/RE
PERFORM CORRECTIVE ACTION ON CORROSION
DISCREPANCIES FOUND ON THE ENGINE/COMPONENTS
* 02/09
/MR/RE
PERFORM CORROSION DETECTION DURING ALL
MAINTENANCE ACTIONS PERFORMED ON THE ENGINE
* 02/09 /
/RE
PERFORM CORROSION DETECTION/PREVENTION ON
SUPPORT EQUIPMENT
* 02/09
/MR/RE
RECEIVE TRAINING ON CORROSION
DETECTION/PREVENTION ON SUPPORT EQUIPMENT
PERFORM CORROSION PREVENTION USING PROPER
PREVENTIVE MATERIALS AND METHODS
* 08/09
/MR/RE
IDENTIFIES CORROSION DETECTION DURING ALL
MAINTENANCE ACTIONS PERFORMED ON THE ENGINE
* 08/09
/MR/RE
DEMO/APPLY KNOWLEDGE OF FAULT ISOLATION: AIR
SYSTEM
* 04/10
/MR/DM
ELECTRICAL SYSTEM
* 04/10
/MR/DM
POWER/PERFORMANCE
LUBRICATION SYSTEM
* 04/10
/MR/DM
SYSTEM
* 04/10
/MR/DM
POWER/PERFORMANCE
* 04/10
/MR/DM
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
LEVEL II LEVEL III
LEVEL II LEVEL III
LEVEL II LEVEL III

Report:
Date Printed:
Page 37 of 300
11-Feb-16
MarTrngJkt
ITSS (MATMEP)
T-400 ENGINE ASSEMBLY TROUBLESHOOTING TECHNIQUES/STEPS (Cont.)
T-700 ENGINE ASSEMBLY TROUBLESHOOTING TECHNIQUES/STEPS
LUBRICATION SYSTEM
RECEIVE TRAINING ON FAULT ISOLATION: AIR
SYSTEM
SYSTEM
ELECTRICAL SYSTEM
POWER/PERFORMANCE
DEMO KNOWLEDGE OF FAULT ISOLATION: T700
ENGINE SYSTEMS
* 02/09 /
/RE
DEMO KNOWLEDGE OF FAULT ISOLATION:
POWER/PERFORMANCE
* 02/09 /
/RE
SYSTEM
ELECTRICAL SYSTEM
* 09/09
/MR/RE
LUBRICATION SYSTEM
* 09/09
/MR/RE
ELECTRICAL SYSTEM
DEMO KNOWLEDGE OF FAULT ISOLATION: ELECTRICAL
SYSTEM
* 02/09 /
/RE
DEMO KNOWLEDGE OF FAULT ISOLATION: AIR SYSTEM * 02/09 /
/RE
POWER/PERFORMANCE
* 09/09
/MR/RE
DEMO KNOWLEDGE OF FAULT ISOLATION:
LUBRICATION SYSTEM
* 02/09 /
/RE
DEMO KNOWLEDGE OF FAULT ISOLATION: FUEL
SYSTEM
* 02/09 /
/RE
SYSTEM
* 09/09
/MR/RE
LUBRICATION SYSTEM
DEMO/APPLY KNOWLEDGE OF FAULT ISOLATION: AIR
SYSTEM
* 09/09
/MR/RE
RECEIVE TRAINING ON FAULT ISOLATION: T700
ENGINE SYSTEMS
RECEIVE TRAINING ON FAULT ISOLATION: AIR
SYSTEM
OPERATES AND MAINTAINS 21C7240G01 MAINTENANCE
STAND
* 02/09
/MR/RE
OPERATES AND MAINTAINS ENGINE STANDS:
21C7082G02 TRANSPORTATION ADAPTER
* 02/09
/MR/RE
OPERATES AND MAINTAINS ENGINE SLINGS: SWE
13833
* 10/09
/MR/RE
OPERATES AND MAINTAINS ENGINE SLINGS:
21C7081G02
* 02/09
/MR/RE
OPERATES AND MAINTAINS NHPC-2 AIR COMPRESSOR * 11/09
/MR/RE
OPERATES AND MAINTAINS ENGINE STANDS: 3110 * 02/09
/MR/RE
21C7220G01 HORIZONTAL MAINTENANCE STAND
* 02/09
/MR/RE
21C7240G01 MAINTENANCE STAND
* 02/09
/MR/RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
LEVEL II LEVEL III
LEVEL II LEVEL III
LEVEL II LEVEL III

Report:
Date Printed:
Page 38 of 300
11-Feb-16
MarTrngJkt
ITSS (MATMEP)
SUPPORT/SPECIAL EQUIPMENT (Cont.)
SCHEDULED/UNSCHEDULED INSPECTIONS
TECHNICAL DIRECTIVES CHANGES/BULLETINS
LEVEL IV MATMEP REQUIREMENTS
21C7083G01 POWER TURBINE STAND
* 02/09
/MR/RE
OPERATES AND MAINTAINS LAPPING MACHINE * 11/09
/MR/RE
OPERATES AND MAINTAINS DRY ICE MACHINE * 11/09
/MR/RE
OPERATES AND MAINTAINS ENGINE TRAILER 3000 * 02/09
/MR/RE
OPERATES AND MAINTAINS BORESCOPE * 02/09
/MR/RE
OPERATES AND MAINTAINS PULLERS * 02/09
/MR/RE
OPERATES AND MAINTAINS ENGINE STANDS: CPWA
30600
* 02/09
/MR/RE
OPERATES AND MAINTAINS ENGINE STANDS: SWE
13852-406
* 10/09
/MR/RE
OPERATES AND MAINTAINS SHROUD GRINDER * 02/09
/MR/RE
OPERATES AND MAINTAINS ENGINE SLINGS: CPWA
30804-50
* 10/09
/MR/RE
OPERATES AND MAINTAINS HYDRAULIC HAND PUMP * 02/09
/MR/RE
PERFORM MAJOR ENGINE INSPECTION (MEI): T-700
ENGINE
* 02/09
/MR/RE
PERFORM PRESERVATION/DEPRESERVATION OF
AIRCRAFT ENGINES: T-400 ENGINE
* 12/09
/MR/RE
PERFORM ENGINE WASH: T-700 ENGINE * 02/09
/MR/RE
PERFORM MAJOR ENGINE INSPECTION (MEI): T-400
ENGINE
* 02/10
/MR/KB
PERFORM PRESERVATION/DEPRESERVATION OF
AIRCRAFT ENGINES: T-700 ENGINE
* 02/09
/MR/RE
PERFORM ENGINE WASH: T-400 ENGINE * 02/10
/MR/KB
INCORPORATE RAPID ACTION MINOR ENGINEERING
CHANGE (RAMEC) PROPOSALS
* 11/09
/RE/RE
INCORPORATE TECHNICAL DIRECTIVES
CHANGES/BULLETINS
* 02/09
/MR/RE
COMPLETE DEMONSTRATES ADVANCED KNOWLEDGE OF
HELICOPTER PUBLICATIONS, DIAGRAMS, SKETCHES
AND DRAWINGS
* 05/10
/WW
T-400 POWER SECTION ASSEMBLY
* 06/11
/SJ
T-700 ELECTRICAL SYSTEM
* 06/11
/ST
T-700 ENGINE ASSEMBLY TROUBLESHOOTING
TECHNIQUES/STEPS
* 06/11
/ST
T-700 COLD SECTION MODULE
* 06/10
/GA
* 06/10
/GA
T-700 AIR SYSTEM
* 06/11
/ST
LEVEL II LEVEL III
LEVEL II LEVEL III
LEVEL II LEVEL III
LEVEL II LEVEL III

Report:
Date Printed:
Page 39 of 300
11-Feb-16
MarTrngJkt
ITSS (MATMEP)
LEVEL IV MATMEP REQUIREMENTS (Cont.)
SAFETY PRECAUTIONS AND PROCEDURES AROUND THE
WORK CENTER
* 05/10
/WW
T-700 ENGINE ASSEMBLY
* 06/11
/SJ
* 05/10
/WW
PRECISION MEASURING EQUIPMENT
* 05/10
/WW
T-400 REDUCTION GEARBOX ASSEMBLY
* 06/11
/SJ
T-400 ENGINE ASSEMBLY TROUBLESHOOTING
TECHNIQUES/STEPS
* 06/11
/SJ
CORROSION CONTROL
* 05/10
/WW
T-700 FUEL SYSTEM
* 06/10
/GA
SCHEDULED/UNSCHEDULED INSPECTIONS
* 06/11
/SJ
TECHNICAL DIRECTIVES CHANGES/BULLETINS
* 06/11
/SJ
T-700 LUBRICATION SYSTEM
* 06/11
/SJ
TASK DESCRIPTION REFERENCE LEVEL I LEVEL IVWUC LEVEL II LEVEL III

Report:
Date Printed:
Page 40 of 300
11-Feb-16
MarTrngJkt
ITSS (MATMEP)
DUTY DESCRIPTION
HYDRAULIC FLUID CONTAMINATION CONTROL PROGRAM
HAZARDOUS MATERIALS/HAZARDOUS WASTE PROGRAM
SIGN OFF TASK AREA VISUAL INFORMATION DISPLAY
SYSTEM (VIDS)
* 10/09 /
/RE
SIGN OFF TASK AREA PLANNED MAINTENANCE SYSTEM
(PMS)
* 02/09 /
/RE
SIGN OFF TASK AREA HAZARDOUS
MATERIALS/HAZARDOUS WASTE PROGRAM
* 02/09 /
/RE
SIGN OFF TASK AREA MAINTENANCE DATA REPORTS
(MDR'S)
* 11/09 /
/RE
SIGN OFF TASK AREA MAINTENANCE TRAINING
PROGRAM
* 11/09 /
/RE
SIGN OFF TASK AREA HYDRAULIC FLUID
CONTAMINATION CONTROL PROGRAM
SIGN OFF TASK AREA ARMAMENT PROGRAMS * 11/09 /
/RE
SIGN OFF TASK AREA FOREIGN OBJECT DAMAGE
(FOD) PREVENTION PROGRAM
* 02/09 /
/RE
SIGN OFF TASK AREA FIRE PREVENTION/PROTECTION
PROGRAM ITSS (MATMEP)
* 10/09 /
/RE
SIGN OFF TASK AREA INDIVIDUAL COMPONENT
REPAIR LIST (ICRL) PROGRAM
* 02/09 /
/RE
SIGN OFF TASK AREA METROLOGY AND CALIBRATION
(METCAL) PROGRAM
* 02/09 /
/RE
* 11/09 /
/RE
SIGN OFF TASK AREA INSPECTIONS * 02/09 /
/RE
SIGN OFF TASK AREA ELECTROSTATIC DISCHARGE
(ESD) CONTROL AND PREVENTION PROGRAM
* 10/09 /
/RE
SIGN OFF TASK AREA CORROSION PREVENTION AND
CONTROL PROGRAM
* 10/09 /
/RE
SIGN OFF TASK AREA TOOL CONTROL PROGRAM (TCP) * 10/09 /
/RE
SIGN OFF TASK AREA MATERIAL CONTROL FUNCTIONS * 11/09 /
/RE
SIGN OFF TASK AREA NAVAL AVIATION LOGISTICS
COMMAND MANAGEMENT INFORMATION SYSTEM
(NALCOMIS)
* 02/09 /
/RE
SIGN OFF TASK AREA MOBILE FACILITIES (MFS) * 11/09 /
/RE
MISUSE AND ABUSE PROGRAM
* 02/09 /
/RE
RECEIVE TRAINING ON HYDRAULIC FLUID
CONTAMINATION CONTROL: HYDRAULIC FLUID
CONTAMINATION CONTROL PROGRAM
RECEIVE TRAINING ON HAZARDOUS MATERIALS:
HAZARDOUS MATERIAL STORAGE
DEMO KNOWLEDGE OF HAZARDOUS MATERIALS:
MATERIAL SAFETY DATA SHEET (MSDS)/HAZARDOUS
MATERIAL - INFORMATION SHEETS
* 02/09 /
/RE
HAZARDOUS MATERIAL STORAGE
* 02/09 /
/RE
HAZARDOUS WASTE DISPOSAL/SHELF LIFE
HAZARDOUS MATERIALS INFORMATION PROGRAM
* 02/09 /
/RE
HAZARDOUS MATERIALS INFORMATION PROGRAM
* 02/09 / /RE
* 04/09 / /RE
* 04/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
* 02/09 / /RE
LEVEL II LEVEL III
LEVEL II LEVEL III
LEVEL II LEVEL III

Report:
Date Printed:
Page 41 of 300
11-Feb-16
MarTrngJkt
ITSS (MATMEP)
HAZARDOUS MATERIALS/HAZARDOUS WASTE PROGRAM (Cont.)
VISUAL INFORMATION DISPLAY SYSTEM (VIDS)
MATERIAL CONTROL FUNCTIONS
MATERIAL SAFETY DATA SHEET (MSDS)/HAZARDOUS
MATERIAL - INFORMATION SHEETS
HAZARDOUS WASTE DISPOSAL/SHELF LIFE
* 02/09 /
/RE
SYSTEM/ MAINTENANCE ACTION FORM:
DISTRIBUTION/CONTROL OF VIDS/MAF
* 02/09 /
/RE
DEMO KNOWLEDGE OF VIDS/MAF DOCUMENTATION:
CORROSION CONTROL
* 10/09 /
/RE
SYSTEM/ MAINTENANCE ACTION FORM: JOB CONTROL
NUMBERS (JCN'S)
* 02/09 /
/RE
REPAIR/ADJUSTMENT ACTIONS NOT REQUIRING R&R
OF REPAIRABLE COMPONENTS
* 02/09 /
/RE
CANNIBALIZATIONS
* 02/09 /
/RE
SYSTEM (VIDS)
* 02/09 /
/RE
SYSTEM/ MAINTENANCE ACTION FORM: INITIATING
VIDS/MAF
* 02/09 /
/RE
TECHNICAL DIRECTIVE COMPLIANCE
* 10/09 /
/RE
VIDS/MAF WORK REQUEST
* 10/09 /
/RE
ACTIONS REQUIRING R&R OF REPAIRABLE
COMPONENTS
* 02/09 /
/RE
DEMO KNOWLEDGE OF VIDS/MAF DOCUMENTATION: RE-
INITIATE VIDS/MAF EOM CLOSEOUT
* 10/09 /
/RE
ASSISTING WORK CENTER
* 10/09 /
/RE
FACILITATE OTHER MAINTENANCE ACTION
* 10/09 /
/RE
INSPECTIONS
* 10/09 /
/RE
TECHNICAL DIRECTIVE DOCUMENTATION
* 10/09 /
/RE
SYSTEM/ MAINTENANCE ACTION FORM: UPDATE
INFORMATION/STATUS OF VIDS/MAF
* 02/09 /
/RE
DEMO KNOWLEDGE OF VIDS/MAF DOCUMENTATION: END
OF MONTH CLOSE OUT VIDS/MAF
* 10/09 /
/RE
EXCESSIVE TROUBLESHOOTING
* 10/09 /
/RE
PUBLICATIONS: FEDLOG
* 02/09 /
/RE
DEMO KNOWLEDGE OF ORDERING REPAIRABLE/RIP
ITEMS: TURN-IN/CONTROL/PROTECTION
* 02/09 /
/RE
DEMO KNOWLEDGE OF ORDERING REPAIRABLE/RIP
ITEMS: TURN-IN OF DEFECTIVE MATERIAL
* 02/09 /
/RE
DEMO KNOWLEDGE OF ENSURES PROPER
PRESERVATION, PACKAGING & HANDLING
* 02/09 /
/RE
DEMO KNOWLEDGE OF EHR/SRC COMPONENTS * 02/09 /
/RE
PUBLICATIONS: CRIPL (CONSOLIDATED REMAIN-IN-
PLACE LIST)
* 11/09 /
/RE
* 02/09 / /RE
LEVEL II LEVEL III
LEVEL II LEVEL III
LEVEL II LEVEL III

Report:
Date Printed:
Page 42 of 300
11-Feb-16
MarTrngJkt
ITSS (MATMEP)
MATERIAL CONTROL FUNCTIONS (Cont.)
NAVAL AVIATION LOGISTICS COMMAND MANAGEMENT INFORMATION SYSTEM (NALCOMIS)
MAINTENANCE DATA REPORTS (MDR'S)
DEMO KNOWLEDGE OF USE OF PEB (PRE-EXPENDED
BINS)
* 02/09 /
/RE
DEMO KNOWLEDGE OF KNOWLEDGE OF SUPPLY
PRIORITIES
* 02/09 /
/RE
PUBLICATIONS: MRIL (NAVSUP PUBLICATION 4107)
* 11/09 /
/RE
DEMO KNOWLEDGE OF SOURCE, MAINTENANCE AND
RECOVERABILITY (SM&R) CODES
* 02/09 /
/RE
DEMO KNOWLEDGE OF RECEIPT/DELIVERY OF PARTS
AND MATERIAL
* 02/09 /
/RE
PERFORM NALCOMIS MAINTENANCE ACTIONS:
TROUBLESHOOTING ISOLATION
* 02/09 /
/RE
PERFORM NALCOMIS MAINTENANCE ACTIONS: MCN RE-
INITIATION EOM CLOSEOUTS
* 02/09 /
/RE
REPAIR/ADJUSTMENT ACTIONS NOT REQUIRING R&R
OF REPAIRABLE COMPONENTS
* 02/09 /
/RE
PERFORM NALCOMIS MAINTENANCE ACTIONS: MCN
INITIATION
* 02/09 /
/RE
DEMO KNOWLEDGE OF NALCOMIS WORK CENTER WORK
LOAD
* 02/09 /
/RE
PERFORM NALCOMIS MAINTENANCE ACTIONS: R&R OF
CONSUMABLE COMPONENTS
* 02/09 /
/RE
CANNIBALIZATIONS
* 02/09 /
/RE
INSPECTIONS
* 02/09 /
/RE
TECHNICAL DIRECTIVE COMPLIANCE (TDC'S)
* 02/09 /
/RE
ASSISTING WORK CENTER
* 02/09 /
/RE
PERFORM NALCOMIS MAINTENANCE ACTIONS: R&R OF
REPAIRABLE COMPONENTS
* 02/09 /
/RE
PERFORM NALCOMIS MAINTENANCE ACTIONS: MCN
SIGN OFF
* 02/09 /
/RE
CDI/SUPERVISOR SIGN OFF
* 02/09 /
/RE
DEMO KNOWLEDGE OF NALCOMIS CODES * 02/09 /
/RE
CORROSION CONTROL
* 02/09 /
/RE
PERFORM NALCOMIS MAINTENANCE ACTIONS: EOM
CLOSEOUT OF MCN'S
* 02/09 /
/RE
DEMO KNOWLEDGE OF VALIDATES VIDS/MAF COPY 1
DAILY AUDIT REPORT
* 02/09 /
/RE
DEMO KNOWLEDGE OF MDR-2 MONTHLY PRODUCTION
REPORT
* 02/09 /
/RE
DEMO KNOWLEDGE OF MDR-3 JOB CONTROL NUMBER
CONSOLIDATION REPORT
* 10/09 /
/RE
DEMO KNOWLEDGE OF MDR-4-1 TECHNICAL DIRECTIVE
COMPLIANCE REPORT
* 10/09 /
/RE
DEMO KNOWLEDGE OF MDR-7 COMPONENT
REPAIR/BEYOND CAPABILITY OF MAINTENANCE
REPORT
* 10/09 /
/RE
DEMO KNOWLEDGE OF MDR-8 FAILED PARTS/PARTS
REQUIRED REPORT
* 10/09 /
/RE
DEMO KNOWLEDGE OF MDR-11 CORROSION CONTROL
TREATMENT REPORT, (C/C WORK CENTER ONLY)
* 11/09 /
/RE
LEVEL II LEVEL III
LEVEL II LEVEL III
LEVEL II LEVEL III

Report:
Date Printed:
Page 43 of 300
11-Feb-16
MarTrngJkt
ITSS (MATMEP)
MAINTENANCE DATA REPORTS (MDR'S) (Cont.)
INSPECTIONS
MOBILE FACILITIES (MFS)
ARMAMENT PROGRAMS
CORROSION PREVENTION AND CONTROL PROGRAM
DEMO KNOWLEDGE OF MDR-6 MAINTENANCE ACTION BY
SYSTEM AND COMPONENT REPORT
* 11/09 /
/RE
DEMO KNOWLEDGE OF HISTORICAL MDR FILES * 11/09 /
/RE
DEMO KNOWLEDGE OF MDR-12 NO DEFECT REPORT * 11/09 /
/RE
DEMO KNOWLEDGE OF MDR-4-2 INTERMEDIATE
TECHNICAL DIRECTIVE COMPLIANCE REPORT
* 10/09 /
/RE
DEMO KNOWLEDGE OF MDR-13 WHEN MALFUNCTION WAS
DISCOVERED REPORT
* 11/09 /
/RE
DEMO KNOWLEDGE OF MDR-9 REPAIR CYCLE DATA
REPORT
* 10/09 /
/RE
DEMO KNOWLEDGE OF PRESERVATION/DEPRESERVATION * 02/09 /
/RE
DEMO KNOWLEDGE OF MAJOR INSPECTIONS:
CONDITIONAL INSPECTIONS
* 02/09 /
/RE
DEMO KNOWLEDGE OF IN-
PROCESS/RECEIVING/SCREENING/FINAL INSPECTIONS
* 02/09 /
/RE
DEMO KNOWLEDGE OF LOW CYCLE FATIGUE (LCF)
PROGRAM
* 02/09 /
/RE
DEMO KNOWLEDGE OF MAJOR INSPECTIONS: SPECIAL
INSPECTIONS
* 02/09 /
/RE
DEMO KNOWLEDGE OF CORROSION
PREVENTION/TREATMENT
* 02/09 /
/RE
DEMO KNOWLEDGE OF PROPER MF CONFIGURATION * 11/09 /
/RE
DEMO KNOWLEDGE OF OPERATION AND INTERMEDIATE
MAINTENANCE WITH IPB
* 11/09 /
/RE
DEMO KNOWLEDGE OF SE CLEANING, PRESERVATION,
AND CORROSION CONTROL
* 02/09 /
/RE
DEMO KNOWLEDGE OF ARMAMENT PROGRAMS: HAZARDS
OF ELECTROMAGNETIC RADIATION TO ORDNANCE
* 11/09 /
/RE
DEMO KNOWLEDGE OF ARMAMENT PROGRAMS: HAZARDS
OF (LASER) EQUIPMENT OPERATION AND SERVICING
* 11/09 /
/RE
DEMO KNOWLEDGE OF ARMAMENT PROGRAMS: SPECIAL
QUALIFICATIONS AND CERTIFICATIONS
* 11/09 /
/RE
DEMO KNOWLEDGE OF ARMAMENT PROGRAMS:
EXPLOSIVE ORDNANCE DRIVERS LICENSING
* 11/09 /
/RE
DEMO KNOWLEDGE OF MAINTENANCE:
IDENTIFIES/CORRECTS AND PERFORMS CORROSION
PREVENTION ON SUPPORT EQUIPMENT
* 10/09 /
/RE
DEMO KNOWLEDGE OF MAINTENANCE:
IDENTIFIES/CORRECTS AND PERFORMS CORROSION
PREVENTION ON ALL MAINTENANCE TASKS
* 10/09 /
/RE
DEMO KNOWLEDGE OF CORROSION PREVENTION AND
CONTROL: CORROSION PREVENTION AND CONTROL
PROGRAM
* 02/09 /
/RE
LEVEL II LEVEL III
LEVEL II LEVEL III
LEVEL II LEVEL III
LEVEL II LEVEL III
LEVEL II LEVEL III

SGTMCDOULETTpdf

Recommended

Recommended

More Related Content

Viewers also liked

Viewers also liked (6)

SGTMCDOULETTpdf