Dip switch number 7 on the Cal Spa 2200/2300 R1D board is used for the topside control panel and logic. If it is placed in the wrong connector, it will cause the spa to continuously display the SF error code. For Watkins spas, pressing the plus buttons together for 2 seconds locks/unlocks the temperature controls, while pressing the minus buttons together locks/unlocks the entire spa. The document provides troubleshooting information for Cal Spa and Watkins spa controls.

1. file:///G|/Tech%20Library/WEB%20Library/Spa%20Docs/Troubleshooting/Troubleshooting%20doc.txt
cal spa 2200/2300 R1D dip switch number 7 is for the 2200/2300 topside and logic. If you put the
switch in the wrong connector then you will get the SF error code all the time
Watkins to lock and unlock the temp or spa for spa it is hitting the plus and plus and for locking
the temp it is minus and minus for 2 seconds. Could be backwards
http://www.MyPoolSpas.com Wholesale Pool and Spa Parts 920-925-3094
file:///G|/Tech%20Library/WEB%20Library/Spa%20Docs/Troubleshooting/Troubleshooting%20doc.txt [10/1/2007 12:58:29 PM]