The document provides installation instructions for a circulation pump. It includes diagrams showing where to connect the black, white, and ground wires for either 120V or 240V setups. It also notes that the pump kit includes both an adapter cord and a 48" molded plug cord. The instructions specify moving a jumper to position 2 for proper voltage selection.

1. CIRCULATION PUMP Horizon Spa & Pool Parts
www.horizonparts.net
800.874.7727
INSTALLATION GUIDE
Locate Available Knockout Remove Plastic Cover or Slide Circ Pump Receptacle
Clip Out Metal Tab Along Grooves
HS-V6501:
Note: Two cords are available with this kit:
adapter cord and 48" mould/colored plug.
P37 P34 connect Black wire to P34
ground
P35 for 120V connect White wire to P35
P36 for 240V connect White wire to P36
move JMP3 to
position #2*
HS-V6510:
black
P47 P16 connect Black wire to P16
with ozone wire
green white
ground
* The illustration below will aid in positioning the jumper
P54 for 120V connect White wire to P54
P50 for 240V connect White wire to P50
move JMP3 to
position #2*
http://www.MyPoolSpas.com Wholesale Pool and Spa Parts 920-925-3094