Deep cleaning of the carpet is a chore you must address from time to time, as it guarantees your carpeted floors are healthy and safe for all family members. Unlike your usual carpet cleaning routine, carpet disinfection requires special cleaning approaches you can get to know in the step-by-step guide.

1. Test your disinfectant
Let the disinfectant mixture sit long enough
Ensure you have a vacuum cleaner, a spray bottle, a
scrub brush, a disinfectant solution and protective gloves
at your disposal. Also, ensure that you have chosen a
disinfectant solution that is effective against the germs.
Just apply a small amount of the solution on the
carpet and wait a few minutes before wiping it off. If
the carpet stays unaffected, you can disinfect the
entire carpeted surface.
The time required for the disinfectant to be effective may
vary depending on the type of solution you are using, so
check the instructions provided by the manufacturer.
Typically you should leave the disinfectant on the carpet
for at least 10 to 15 minutes.
Apply your disinfectant solution
Rinse the carpet thoroughly
Do your best to cover the whole surface, which includes
the carpet’s corners and edges. You can employ a
scrub brush to better work the solution into the carpet
fibres and ensure it penetrates deeper.
Use a clean cloth or sponge to apply water to the carpet,
and then blot the excess water with a dry towel. You may
need to repeat this process several times to ensure that
all the disinfectant residue has been removed.
A STEP-BY-STEP
GUIDE TO DISINFECTING
THE CARPET
Gather your cleaning tools
Vacuum thoroughly
Dealing with the task will take care of any loose dirt,
debris or pet hair stuck in the carpet’s fibres, and it will
also make it easier for the disinfectant solution to
penetrate deep into the carpet fibres.
Follow For More Tips
professional-carpet-cleaning-london.co.uk