Why Teams call analytics are critical to your entire business
Screw conveyor loader brochure
1. bulk-flow.com sales@bulk-flow.com/
SCREW CONVEYOR LOADER
MAIN SPECIFICATIONS
MAIN DIMENSIONS
Model
Commodity
Bulk Sectors
Products to be transfered
Range densities between
Capacity
Total length
Max width
High max.
8.115mm
2.335mm
Interior load length 5.500mm
Forklift access 230 x 85mm*
NOTE: Indoor measurements tube.
NOTE: or other depending on local voltage and Hz requirements
Useful window liner load 1330 x 310mm
20 feet loader
All ATEX and
non ATEX versions
Environmental, recycling,
agricultural, food, mining,
Powder and non powder
applications
All
chemical and pharmaceutical
industries.
100m³/h (3,531Ft³/h)
2.514mm
TOTAL WEIGHT
Machine + platform
Platform counterweights
3.000Kg
SCREWS LOAD
Non FDA Materials Carbon steel
(Epoxy finish)
Back view Side view
FDA Materials Stain steel
PAINTING PROCESS FINISHES
Epoxy primer layer 50 micron
Polyurethane finished layer 30 micron
500Kg
MACHINE
Loading mouth feeding silo deposit
Receiving box hopper loading
Ø470mm INT.
Stainless steel
Stainless steel
Structure
Platform
Carbon steel
(painted finish)
Carbon steel
(painted finish)
MOTOR
Type
Power (KW)
FAF77 DRN132 S4
5,5kW IP 55 IE-3
Speed (RPM)
Supply / Class
50Hz rpm/104
60Hz rpm/126
50Hz - 380-400 Y - 11A
60Hz - 440-460 Y - 19A
BEARING
Control bearing
Intermediate bearings
Direct to reducer.
Stuffed box press + labyrinth
INA D. 50 Obturation"R"
RCJY Plate retainer D.L.Final bearings
Removable structure with
friction pendulum split type
with bushing D.40 Polyamide
(PAGGMO)
Anchoring
2 steel pivots anchored
to upper container
Twist lock
ELECTRICAL BOX
Dimensions
Lateral operated
switch-disconnector
600x700x210mm
Inox AISI 304
3P +N+ 63A
Feeding
Control voltage
400 VAC lll + N +PE / 50Hz
24 VDC
Wall base connection
3P + N + PE Male 63A.
REQUIREMENT
Power Supply KW/Amps 16,5 KW / 33A
SCREW CONVEYOR LOADER
A revolutionary bulk solid loader that optimizes loading processes
in 20’ & 40’ foot container
The data in this brochure is determined based on our standard testing condition.
Availability and specifications depend on region and are subject to change without notice.
Due to photography and printing, color of the actual vehicle may vary from this brochure.
The performance may vary depending on the actual specification and the type of commodity as well as the condition of the operating area.
BULK-FLOW Equipment Solutions
A division of BULK-FLOW Group
2. BULK-FLOW has designed the loader with the following key objectives in mind:
1. Maximize payload. Increases payload from 1MT to 2MT depending on the type of commodity.
2. The equipment is designed with a pneumatic seal that allows for a dust free loading operation.
3. System does not add more air to the particle and thus requires little or not dust collection loading.
4. Reliable heavy-duty equipment.
5. No particle size degradation.
6. Highly movable as it is fixed to the container and then positioned to any silo*.
7. Loading capacity set out at 120MT/hr.
8. High speed loading. About 30MT in 15 minutes depending on product density.
9. The least power consumption of all loading equipment possibilities.
10. Neither equipment nor truck has to move during loading.
*Note: Provided there is enough ground clearance.
Features and equipment may
vary depending on market.
The Screw Conveyor Loader
Optimizing loading process in 20 foot container
Fixing the Screw Conveyor Loader
onto the container
Installing the liner designed
for the Screw Conveyor Loader
Adjust the silo unloading spout into
the Screw Conveyor Loader’ hopper
Loading Process with the
Screw Conveyor Loader’ hopper
Level sensor
Screws
Filling inlet
Electric gear motor
Electrical enclosure
Door
Counterweights
Power connection
Programmable
Logic
Controller
Fork hole location
ON/OFF
switch
Clasp adjustable
fastening
Centrifugal fan