Beginners Guide to TikTok for Search - Rachel Pearson - We are Tilt __ Bright...
Capillary Blood Collection for Thick Film
1. Page 1 of 1
COLLECTION PROCEDURE
Capillary Blood for Thick Film
Cleanse the puncture area with 70% ethanol. Allow the area to dry.
Using a sterile pricker or lancet, make a rapid puncture, sufficiently deep
to allow the free flow of blood.
Wipe away the first drop of blood with a dry piece of cotton wool and use
the next few drops for the test. Do not squeeze too hard because this will
result in an unreliable test result.
When sufficient blood has been collected, press a piece of dry cotton
wool over the puncture area until bleeding stops.
Place a drop of blood on a microscope slide and spread to make an area
of about 1 cm2. It should just be possible to read small print through a
thick film.
CLINICAL LABORATORY SECTION
REPUBLIC OF CAMEROON
Ministry of Health
South Regional Delegation
Dja et Lobo Divisional Delegation
DISTRICT HOSPITAL SANGMELIMA
Telephone: +237 22-28-85-55
E-mail: labohds@gmail.com
Blood collection for a thick film
5
6
Written by
NKENGACHA Marcellous AGENDIA
Medical Laboratory Scientist & Head Of Clinical Laboratory Section
District Hospital Sangmelima, South Region – Cameroon.
Tel.: +237 781 07 824 / 337 54 963 E-mail: agendiale@gmail.com
Website: https://sites.google.com/site/nkengachaandscience
GES140621E
Version français GES140621F