This document provides product data and specifications for FR POLYMINIUM 202, a laminated insulation material produced by San Miguel Yamamura Woven Products Sdn. Bhd. The material consists of aluminum foil laminated with polyethylene tie layers and a woven fabric core. Key specifications include a width of 1250mm, grammage of 117g/m2, tensile breaking strength over 7.2kN/m, bursting strength over 700kPa, and steady-state thermal resistance of at least 1.80m2K/W. Warnings are also provided about ensuring proper spacing and preventing condensation or exposure to corrosive elements which could impact the material's emissivity over time.

1. San Miguel Yamamura Woven Products Sdn. Bhd.
[Formerly known as San Miguel Woven Products Sdn. Bhd.]
A Subsidiary of San Miguel Yamamura Packaging International Ltd.
Lots 9 & 10, Jalan Usaha 4, Ayer Keroh Industrial Estate, 75450 Melaka, Malaysia.
Tel : 06-2323898 (5 lines) Fax : 06-2329916 / 06-2321437
PRODUCT DATA SHEET
Customer Name : P&P PLASTICS PTY. LTD.
Product Type : NFR 2 – AL / AL
Product Name : FR POLYMINIUM 202
Product Design : AL / PE TIE LAYER / HDPE WOVEN FABRIC / PE TIE LAYER / AL
CHARACTERISTIC TEST METHOD UNIT (SI) SPECIFICATION
LaminatedRollSpecifications
Width In-house mm 1250 ± 5
Length In-house m ≥ 40
Grammage In-house g/m2 117 ± 10%
Mass Content In-house kg/roll 6.20 ± 10%
Resistance to Dry Delamination
at elevated ambient temperatures
SANS 1381-4:2013 - No delamination
Resistance to
Corrosion
Wet delamination
at elevated ambient temperatures
SANS 1381-4:2013 - No corrosion
No delamination
Shrinkage
MD
CD
SANS 1381-4:2013 % < 1.5
< 1.5
Emissivity SANS 1381-4:2013 Index ≤ 0.05
Water Vapour Permeance ASTM E96 g/(s.MN) ≤ 0.002
Fire Performance Classification
SANS 428
(SANS 10177
PARTS 5, 9, 10)
Class B/B1
Tensile Breaking Strength
MD
CD
SANS 1381-4:2013 kN/m > 7.2
> 5.4
Bursting Strength ISO 2758 kPa > 700
Puncture Resistance SANS 456 mJ > 700
Edge Tear Resistance
MD
CD
SANS 1381-4:2013 N > 100
> 100
System Thermal Resistance
With two air gaps – heat flow down
ISO 8301:1991 m2
K/W > 1.20
Steady-state Thermal Resistance ISO 8302:1991 m2
K/W ≥ 1.80
Rev. 5 (29-10-2014) – B14NN14B
(Pg 1 of 2)

2. San Miguel Yamamura Woven Products Sdn. Bhd.
[Formerly known as San Miguel Woven Products Sdn. Bhd.]
A Subsidiary of San Miguel Yamamura Packaging International Ltd.
Lots 9 & 10, Jalan Usaha 4, Ayer Keroh Industrial Estate, 75450 Melaka, Malaysia.
Tel : 06-2323898 (5 lines) Fax : 06-2329916 / 06-2321437
PRODUCT DATA SHEET
CONSTRUCTION OF FR POLYMINIUM 202 (SANS 1381-4 CLASS A)
Specific Test Conditions For System Thermal Resistance:
Parameter Unit Setting
Air Gap at Hot Side
Air space
Temperature
mm
°C
40
50
Air Gap at Cold Side
Air space
Temperature
mm
°C
60
10
Warnings
There are special circumstances where unless special precautions are taken, the atmosphere in the roof can cause corrosion of
the laminate that will directly affect its emissivity and therefore its thermal insulation properties. Air space is vital between
insulation foil and battens.
Under certain circumstances the aluminum foil may not be resistance to tarnishing and hence its reflective and emissive
properties may be affected. Such conditions may include condensation, acidic vapors of sea salts and mists of corrosive liquids.
Rev. 5 (29-10-2014) – B14NN14B
(Pg 2 of 2)
Remark : PE - Polyethylene
PE Tie Layer, 20-25 g/m²
Woven Fabric, 40-48 g/m²
Aluminium Foil, 16-17 g/m²
PE Tie Layer, 20-25 g/m²
Aluminium Foil, 16-17 g/m²