The document describes a boring tool called the No! Vibration Boring Bars from Dorian Tools that is claimed to bore holes without any vibration. It shows videos of the tool boring holes while a coin placed on its shank does not fall, demonstrating the lack of vibration. The document provides details on the various types of boring and threading solutions offered by Dorian Tools, including straight boring, undercutting, profiling, back facing, grooving, threading, and taper boring tools in various shank sizes ranging from 6mm to 100mm. It includes a form to collect application details from customers to recommend the correct boring solution.
Introduction to NISSIN CNC 3D Freeform Tube Bender, NPB Series
No Vibration Boring Bars Make Deep Hole Machining Simple
1. MakesDeepHole BoringSimple!
Brought to you in India
By
Unlimted Innovative Machining Solutions LLP
We request you to go through this
for FIVE MINUTES to know why and how
the Five Cents Coin does not fall
So that you can save your costly money
to fall in your Organization
Please go through the next few pages why we claim No! Vibration and
we are sure after seeing this YOU CANNOT STOP YOURSELF to buy this
UNBELIEVABLE
No! Vibration Boring Bars from Dorian Tools and we could not find a
better way to demonstrate that we really mean Technology of No! Vibration
2. Roughing with a 3''/76.2 mm Bar , L/D 14 , and depth of cut 2.5 mm and the coin does not fall
The Recipe
https://youtu.be/upeNsjLDg_0
Finishing with a 32 mm Bar , L/D 14 ,
and depth of cut 0.13mm and the coin
does not fall
https://youtu.be/TRe8HIlvexE
3. Call: 979-282-2861 Fax: 888-508-7055 Visit:www.doriantool.com E-mail:sales@doriantool.com D-3
Solution Tool!™ Integral
The NO! Vibration Re-Tunable Boring System
Shank Size 0.25 to 0.625″
& (6mm to 16mm)
The NO! Vibration Re-Tunable Boring Bars
Solution Tool!™
The NO! Vibration Re-Tunable
Boring Bars
Available in Inch and Metric Shank Size
Inch 0.25" to 4.00″, Metric 6mm to 100mm
Solution Tool!™ Quick Change
The NO! Vibration Re-Tunable Boring System
Shank Size 0.750″ to 1.250″
& (20mm to 32mm)
Solution Tool!™ Modular Jet-Stream™
The NO! Vibration Re-Tunable Boring System
Shank Size 1.500″ to 4.00″
& (40mm to 100mm)
Solution Tool!™ Quick Change
The NO! Vibration Re-Tunable Threading
System
Shank Size 0.750″ to 1.250″
& (20mm to 32mm
Solution Tool!™ Modular Jet-Stream™
The NO! Vibration Re-Tunable Threading System
Shank Size 1.500″ to 4.00″
& (32mm to 100mm)
4. 1. Straight Boring Boring Description mm/in
Starting Bore Diameter SBD Description
Finished Bore Diameter FBD Hardness
Total Blind Bore TBB Interrupted Cut
Total Bore Length TBL Regular Cut
Finish Desired
Any other Detail
2. Straight Boring and Under-Cut Boring Description mm/in
Starting Bore Diameter SBD Description
Finished Bore Diameter FBD Hardness
Total Bore Length TBL Interrupted Cut
Under-Cut Diameter UCD Regular Cut
Under-Cut Distance UCL Finish Desired
Groove Width GW Any other Detail
3. Straight Boring and Profiling Boring Description mm/in
Starting Bore Diameter SBD Description
Finished Bore Diameter FBD Hardness
Total Bore Length TBL Interrupted Cut
Under-Cut Diameter UCD Regular Cut
Under-Cut Distance UCL Finish Desired
Angle Profile &° Any other Detail
4. Straight Boring and Back Face Boring Description mm/in
Starting Bore Diameter SBD Description
Finished Bore Diameter FBD Hardness
Total Bore Length TBL Interrupted Cut
Back Face Diameter BFD Regular Cut
Back Face Shoulder BFS Finish Desired
Any other Detail
5.Straight Boring and Grooving Boring Description mm/in
Starting Bore Diameter SBD Description
Finished Bore Diameter FBD Hardness
Total Bore Length TBL Interrupted Cut
Groove Diameter GD Regular Cut
Groove Width GW Finish Desired
Groove Max Distance GMD Any other Detail
6. Straight Boring Grooving and Threading Boring Description mm/in
Starting Bore Diameter SBD Description
Finished Bore Diameter FBD Hardness
Total Bore Length TBL Interrupted Cut
Thread Specification THR Regular Cut
Starting Thread Depth STD Finish Desired
Any other Detail
7. Straight and Taper Bore Boring Description mm/in
Starting Bore Diameter SBD Description
Finished Small Diameter FSB Hardness
Finished Large Diameter FLD Interrupted Cut
Taping Bore Lenght TLB Regular Cut
Large Bore Length LBC Finish Desired
Total Bore Length TBL Any other Detail
7. Straight and Taper Bore Boring Description mm/in
Starting Bore Diameter SBD Description
Small Diameter SD Hardness
Total Bore Length TBL Interrupted Cut
Large Bore Length DBL Regular Cut
Depth of Bore Length DBL Finish Desired
Any other Detail
Material
Let's Understand Your
Application to Recommend
You the Correct Solution
Material
Material
Material
Material
Material
Material
Material
Phone:
You are Important
Company Name :
Address :
Email Id :
New Project , Repeat Project, Aleasy used
Competition or Dorian, Existing Method, What
improvement you are looking for and any other
details which you want to share