1. MOHAMED KAMAL ELDIN M. AHMED
1 | P a g e
002 010 0477 0699 / eng_mohamed_kamal@hotmail.com
OBJECTIVE:
A maintenance supervisor / chief mechanic with 12+ years’ experience in oil field
maintenance, with professional knowledge in cyber/high tech rigs maintenance, commissioning,
maintenance programs and repair strategies. Seeking a new challenging position to offer experience
and expertise accrued in the oil and gas industry.
Fields of Interest: Oil & gas, maintenance, engineering, installations and technical support.
Job Location : Worldwide / Offshore locations.
Profession Experience:
Current: Maintenance Supervisor at Egyptian Drilling Company, rig SNEFERU
Profession Chronology:
Maintenance Supervisor EDC (Mechanical/Electrical): Feb. 2014 up to date.
Maintenance Supervisor Trainee EDC: Feb. 2013 - Feb. 2014
Chief Mechanic (New Build Pacific Class 375 Cyber Jack-Up) EDC: Jan. 2010 - Feb. 2013
Chief Mechanic EDC: Dec. 2007 - Jan. 2010
Rig Mechanic EDC: Jun. 2005 - Dec. 2007
Asst. Rig Mechanic EDC: Nov. 2003 - Jun. 2005
Profession Responsibilities & Duties Digest:
Provide technical support to the rig, insuring reliability and efficiency of all equipment’s on
board.
Provide advice for applying preventive, predictive, corrective, unscheduled and time based
maintenance.
Manage rig new projects installation, modifications and upgrades on board while assigned to
drilling operation timing.
Execute commissioning, initial startup and spud in operation for new builds. Modifications and
new installations in ship yard, beside initial startup.
Provide all kind of technical support for maintenance and operation of all mechanical
and electrical equipment’s and systems deployed at rig to increase reliability.
Follow up all maintenance inspections done on board including carrying out tests, calculations,
and treatments, verifying mechanical/electrical isolation, and lock out or tag out for right,
correct and safe procedures to be done.
Participated in putting the maintenance program (check points and intervals for scheduled
checks), schedules and planning for major overhauls.
Insure applying the pre-planned and preventive maintenance program (PM’s - ORACLE) as
company procedure and correctly, doing failure analysis and cause root reports.
Maintain, follow up and update rig class certificates, drilling equipment’s certificates and
maintenance records.
Maintain spare parts inventory.
Lead monitoring, operating, schedule service and major overhaul for main & emergency diesel
engines. Engine types CAT 3500, 3400, 3300 families & D399. Experienced working with
Cummins and EMD’s engines.
Managing all offshore rig drilling equipment as Top Drive, Draw works, Mud Pumps,
BOP closing unit, BOP( SHAFFE and CAMERON With different sizes), iron roughneck, pip-
racking, Bridge-Racker & other auxiliary equipment's for daily inspections, routine
maintenance and major overhauling.
Worked with CANRIG, NOV and VARCO top drives, TTS, IDECO and NOV draw works.
EWECO (Weatherford), NOV and IDECO mud pump.
2. MOHAMED KAMAL ELDIN M. AHMED
2 | P a g e
002 010 0477 0699 / eng_mohamed_kamal@hotmail.com
Carrying out all day to day tasks of administrative and operational maintenance for rig
auxiliary equipment's like pedestal cranes, air compressors screw & reciprocating types, fuel
oil purifiers, distiller units, different type of pumps & marine sanitation devise.
Maintain accommodation facilities like air conditioning equipment’s, fridges, galley
equipment's & plumping.
Ensure Work is done in a safe, effective and time managed way.
Rigs Types/Class, Names and location:
SNEFERU: Baker marine pacific class 375, cyber, high tech jack up rig. (Persian Gulf)
El QAHER 1: Baker marine pacific class 375, cyber, high tech jack up rig. (Mediterranean Sea)
SNUSRET: Conventional rig. (Persian Gulf)
KAMOSE: Conventional rig. (Suez Gulf)
Clients Drilled For:
BP, MAERSK OIL QATAR and SAUDI ARAMCO.
Mar. 2002 - Nov. 2003: Technical support and maintenance engineer for central HVAC sys.
Carry out, support the after sales & technical division tasks, through instillations, start-up's,
commissioning & maintenance for our chillers, package units, ducted split units & air handling
units. Besides ducting design, instillations and cold storage rooms design.
Education & Qualification’s:
Bachelor’s Degree in Mechanical Power Engineering, Jan 2002. GPA (2.5)
GPA 2.5, Graduation Grade: Good.
Higher Technological Institute, Egypt.
Higher National Diploma (HND) Standard, certified from NARIC, UK. 2006.
Training & certifications:
Technical:
Stability & Ballast Control for MODU'S MARTIN INTERNATIONAL USA
Drilling through Equipment’s EDC training center
Steel & Welding inspection: Egypt welding academy
AC Generators: EDC training center
Siemens PLC service 1: Siemens training center
Drilling package, cyber chairs & DCR: TTS CAMERON Singapore
Draw-works, cat heads operation & maintenance: TTS CAMERON Singapore
Iron roughneck Jim 10 operation & maintenance: TTS CAMERON on board training
Bridge Racker operation & maintenance: TTS CAMERON on board training
CANRIG top drive operation and maintenance: CANRIG Singapore
Weatherford iron rough-neck: Weatherford Singapore
Design & Construction of piping systems: American University Cairo
Caterpillar 3516 B, C Engines: MANTRAC, Egypt
Advanced hydraulic & basic hydraulics: EDC training center
Exxon Mobile lubrication fundamentals: EDC training center
BOP closing units, accumulator: EDC training center
Mud pumps: EDC training center
ORACLE maintenance program: EDC training center
NOV, IDS 1 top drive: Hands on training, EDC Workshop
AutoCAD: Private center
Mechanical desk top: Private center
Design for central air conditioning sys: Egypt syndicate of engineers
3. MOHAMED KAMAL ELDIN M. AHMED
3 | P a g e
002 010 0477 0699 / eng_mohamed_kamal@hotmail.com
Sea survival:
Advanced firefighting: Exp.:Feb. 2020
Proficiency in fast rescue boat (coxswain): Exp.: Jul. 2015
ABC’s of H2S and SCBA donning: Exp.: Dec.2016
Offshore firefighting (smoke divers fire team): No Exp.
Proficiency in Survival Craft: Exp.: Aug 2014
Soft skills & safety:
Manual Handling Respiratory Protection
Fall Protection Rigging and Lifting
H2S Awareness Environmental Awareness
Accident Investigation First Aid
Davit Lunched Life Raft Safety Leadership and Safety Values
Stop Safety Safety Management System
Risk Assessment Confined Space Rescue
HAZCOM Vertical Rescue
Scaffold Safety Air Hoist Operator
Hand Injury Asbestos Awareness
Noise Awareness Emergency Response and Spill Prevention
Lock out Tag out Permit to Work
Team Building Fire Prevention and Fire Fighting
Languages Spoken:
English: Fluent, With IELTS Overall Score 6.5(Feb 2015)
Arabic: Mother tongue
Computer Skills:
ORACLE data base for maintenance application.
ET Software for CAT Engines.
Microsoft office (MS Word, MS Excel, MS PowerPoint, MS Project).
AutoCAD.
Internet networks.
Personal and soft skills:
Team leading and personnel management.
Interpersonal and communication skills.
Team player.
Self-motivated and adaptable.
Negotiation skills.
Work under pressure and deadline oriented.
Personal Information:
Birth Date: 05 July 1979
Nationality: Egyptian
Marital Status: Married, have three children.
4. MOHAMED KAMAL ELDIN M. AHMED
4 | P a g e
002 010 0477 0699 / eng_mohamed_kamal@hotmail.com
Reference Documents:
OGUK: Last check Jun. 2014
TBOSEIT (OPITO): Validity Apr. 2017
Panama Able Seaman: Validity Aug. 2019
Panama Life Boat Men MOU: Validity Aug. 2019
Reference Personnel:
Mr. Dirk Devogeleer OIM: ddevogeleer@hotmail.com
Mr. Peter Wilson, rig engineer rig EL QAHER 1: pwilson58@hotmail.com
I declare that all the above information is correct and ready to proof any expertise. And to show
experience certificates upon request.
Will you please be noted that due to working offshore; make the contacts through the email.