1. 1
Mina Attallah Tawfik
mina_attallah_tawfik@hotmail.com
Nationality: Egyptian.
Marital Status: Single.
Military History: Exemption.
Date of Birth: 01­04­1989.
Address: 6 St. Abu Bakr El Sedik, El Hadaa, Fayoum.
Cell Phone: (+20) 01000632122.
 Objective:
Looking for a challenging position in a reputable company to utilize my civil engineering
background, Interpersonal skills and apply my academic study enabling me to build up a solid
future in the International market and career progress.
 Career Experience:
Alfanar Construction Company, Saudi Arabia, Southern Area – Jizan:
(Since April 2015 till Now)
Project: Jazan Refinery Terminal Project (Naptha Processing and
Aromatics Complex) EPC: 12.
Owner: Saudi Arabian Oil Company ARAMCO.
Prime Contractor& Consulting: JGC Corporation.
Main Contractor: Daewoo Engineering& Consulting.
Position: Act as Technical Office Manager.
Project Description:
Saudi Aramco's new Jazan Refinery will be a grassroots facility with an anticipated capacity of up to
400,000 barrels per day (BPD). The proposed facility will be located in Jazan, Saudi Arabia. The
Jazan Refinery and Terminal project is expected to support the future development of Jazan
Economic City. The additional refined products from the new facility will satisfy the growth in
domestic demand within the Kingdom of Saudi Arabia. The refinery will be capable of processing
Arabian crude oils to manufacture approximately 75,000 bpd of gasoline, 100,000­160,000 bpd of
ultra­low­sulfur diesel (10 parts per million), and 160,000­220,000 bpd of fuel oil, depending on the
crude mix processed. It is envisioned that the proposed refinery will ultimately be integrated with a
future nearby world scale power and water facility. The marine terminal will have the capability of
receiving Very Large Crude Carriers for the supply of crude to the refinery and will have berths to
support product exports from the refinery.
Shop drawings of Concrete and Reinforcement Details for five buildings “Substation
010, 014 and Process Interface Buildings PIB010, 014 and AFD”.
Shop drawings of Transformers Foundation, Firewalls, Side Walks and External units.
Architectural Shop Drawings of Access Raised Floor, Ceiling, Water Proofing,
Aluminum Copping, Handrails of Stairs.
Shop drawings of Miscellanies steel items like, Caged Ladders, Down Spots Pipes.

2. 2
Material Submittals for All Materials such as (Blast Doors, Fire Resistant Doors,
Anchor Bolts, Access Raised Floor, Ceiling System, Gypsum Board, Water Proof
System and Finishing Paints).
Quantity Survey of Materials and Finishing.
Survey Reports of Anchor Bolts of SS010, SS014.
Coordination, Clarifications and Project Control.
Review and Checking the Specs. Of the material along with Quotations.
Purchasing Materials and Coordination of Suppliers.
Issuing of Monthly Invoices and Variation Orders.
Deals with Saudi Aramco Standards (SAES, SAMSS, PIPs) and International Codes
(ASTMs, ACIs, IBC, NEMA, NEC).
Orascom Construction with Besix Group (JV), Giza, 6th‐October:
(Since October 2012 till April 2015)
Project: Mall Of Egypt.
Owner: Majid Al Futtaim.
Consultant: Rafaat Miller Consulting.
Main Contractor: Orascom Construction Join Venture Besix Group.
Position: Technical Office Engineer.
Project Description:
Mall of Egypt is a super­regional mall of 160,000 square meters that will dominate the western half
of the greater Cairo metropolis. Scheduled to open in 2015, the mall will be a sister brand to Mall of
the Emirates, combining a powerful range of retailers with the most comprehensive leisure offering
in North Africa. The mall will feature a range of international fashion and lifestyle retail brands, a
ski park, 17­screen cinema, family entertainment center and over 50 food and beverage outlets. The
mall includes direct bridge access off the Al Wahat highway into 6,500 parking spaces.
Check all project CAD drawings and PDF files from missing objects and corrupted
files.
Shop drawings for site installations as logistic plans.
Make some surveying drawings with coordinates.
Make some drawings for required tests on site.
Make all required excavation drawings and Refill according to geotechnical reports
(Whole project).
Make excavation drawings for reinforced soil wall at north and west side (Zone: CN1,
M03 and M04) level 04 and level 06.
Make preliminary quantities of required excavation (Whole project).
Make shop drawings of all piles for ski slope area concrete dimensions and its
reinforcement (Zone: SKP).
Make modifications of shop drawings of concrete footings and ground beams (Zones:
M02, M03 and M04).
Make shop drawings of slab on grade for ski slope area concrete and reinforcement
(Zone: SKP).
Make shop drawings of slab on grade for leisure area (Zone: Lo2 and Lo3).
Make modifications of shop drawings of all slab on grade of basement (Zones: M07,
M08, M10 and M11) level 01.

3. 3
Make shop drawings of some pits concrete and its reinforcement (Elevator, Escalator
and Moving walk pit).
Make modifications of shop drawings of slab on grade level 04 (Zones: M02, M03,
M04 toM12).
Make shop drawings of suspended slab level 06 (Zones: M01, M02, M03 to M12).
Coordination between different trades (Architectural­MEP­Steel Structure and
Methods Department) about key stone joints, Infra pipes, Manholes, Drainage pipes,
Steel bridges connections and Cranes locations.
Make shop drawings of base coarse for asphalt roads level 01, level 04 (Zones: M07,
M10, SKP, CN2, EXW, ECE and HVO).
Make shop drawings of slab on grade of car park north level 04 (Zones: CN1 and
CN2).
Deals with documents such as RFI’s and Transmittals.
Orascom Construction Company (OC), Cairo, New Cairo:
(Since September 2012 till October 2012)
Project: Mivida Project New Cairo, Egypt ­ Plot Fences Project.
Owner: Emaar Misr.
Consultant: Sites International.
Main Contractor: Orascom Construction Company.
Position: Junior Technical Office Engineer.
Project Description:
A luxury residential compound covers area of 3.8 million square meter contains of type of units like
villas, Town houses, Twin houses and Apartments & Commercial. Include 33 acre central park,
green community, boulevard style shopping, medical services, educational facilities.
Deals with all shop drawings.
Produce layouts Plans of Parcels.
Deals with all documents such as transmittals, Submittals, Material inspection request
(MIR) and Request for information (RFI).
Orascom Construction Company (OC), Cairo, New Cairo:
(Since August 2011 till September 2012)
Project: Bank Head Quarters In New Cairo – Phase 2 (IDWB 2).
Owner: Industrial Development& Workers Bank of Egypt.
Consultant: Saleh& Hegab – Al ghary architects.
Main Contractor: Orascom Construction Company.
Position: Junior Technical Office Engineer
Project Description:
Multi stores Luxury Building Modern Style Contains a lot of Types stairs, Ramps and different
structure design systems.

4. 4
Make shop drawings of retaining wall concrete dimensions and reinforcement (phase
2).
Make shop drawings of columns for upper basement, Ground and First floor.
Make shop drawing of reinforcement of slabs of ground floor and First floor.
Sketches and BBSs.
 Training Profile:
Orascom Construction Industries (O.C.I):
Summer training program at kutamate combined cycle project in beniswaf, Cairo on July
2009.
Summer training program at smart village on July 2008.
Ministry of water resources and irrigation:
Kantara east project in the identification and construction activities in Sinai development on
august 2008.
 Education Profile:
High School in Fayoum from Sep 2003 to Sep 2006 with total score of 93 % degree.
Helwan University, faculty of engineering of mataria.
Bachelor of Civil Engineering at May 2011.
Graduation Project, Structure analysis Project with 95% score excellent degree.
Graduation year with 80.2% degree.
Total cumulative years with 74.3% degree.
 Language Skills:
Native language is Arabic.
Other language is English (Writing – Speaking) is Very Good.
 Personal Activities:
Reading Books, Newspaper.
Listening to Music.
Internet Browsing and search.
 Computer Skills:
AutoCAD 2D, 3D.
Revit Structure 2010.
SAB 2000.
Microsoft Office 2010.
Windows 7, 8.

5. 5
 Courses:
Engineering Course at December 2010 from American University in Cairo of computer aided
graphics “Auto CAD 2010”.
Engineering Course at September 2011 from Cairo University of structure analysis program
“SAB 2000”.
Engineering Course on September 2012 from Master CAD center of structural analysis and
modeling program “Revit Structure 2010”.
All references and certificate are available upon your request
I hope my qualification will meet your requirement.
Thanks,
Mina Attallah Tawfik