Anode material-4-li-ion-secondary-battery-technology-trend-n-market-forecast-2012-ver

Anode Material for Li-ion Secondary Battery -
Technology Trend and Market Forecast (2012 ver.)

Phone: +44 20 8123 2220
Fax: +44 207 900 3970
office@marketpublishers.com
http://marketpublishers.com

Phone: +44 20 8123 2220

Anode Material for Li-ion Secondary Battery - Technology Trend and Market
Forecast (2012 ver.)

Date: March 12, 2012
Pages: 234
Price: US$ 4,950.00
ID: A343E0C7C20EN

Anode material receiving increasing attention with expansion of LIB applications

As of 2011, more than 97% of LIB anode material consumption is occupied by graphite. Graphite has held
its dominant position, since Sony succeeded in commercialization of LIB for the first time in 1991. Contrary
to other materials that have undergone significant changes such as anode materials and separators, it has
remained the same for last 20 years.

Graphite is largely classified into natural graphite and artificial graphite. Natural graphite occurs in the state
where about 5-15% of graphite is contained. Graphite to be used as an LIB anode material, however,
should have cell-grade purity, at least more than 99.5%. To increase purity, a process of eliminating
impurities is to be carried out after separation and chemical treatment. In some times, it is processed into a
spherical form and undergoes pith coating.

On the other hand, artificial graphite is a material produced by heating carbon precursors such as
petroleum or coal tar cokes but minerals as starting materials at the high temperature of more than 2800C

Anode materials other than graphite are soft carbon and hard carbon, which are produced by carrying out
heat treatment to cokes composed of carbon at a relatively low temperature of 1000~1200?? Especially
hard carbon is increasing in importance due to its application to electric vehicles.

Among compound-based materials, LTO, one of oxide compounds, began to be adopted by Toshiba.
Among metal compounds, a Sn-Co-C anode material is being adopted by Sony.

LIB anode materials should meet the following conditions.

High charge/discharge capacity (per unit weight or unit volume)
Low initial irreversible capacity loss
Excellent charge/discharge cycle properties
High electric conductivity and ion diffusion rates within active materials
Less change in volume by intercalation/deintercalation of lithium
Eco-friendliness
Easy manufacturing process and low prices

It is graphite that meets the above conditions. New requirements for anode materials, however, are
continuously being made for high capacity and high output LIB.

This report provides the technology trends of various types of anode materials, especially the recent trend
focused on alloy and compound-based materials.

In addition, this report examines the current status of anode material production by manufacturer in Japan,
China, Korea and other countries; 13 Japanese companies, 5 Chinese companies and 4 Korean
companies.

Lastly, the consumer-side trend and the provider-side trend are provided based on pipelines by country,

Anode Material for Li-ion Secondary Battery - Technology Trend and Market Forecast (2012 ver.) 2

Phone: +44 20 8123 2220

manufacturer, and type. In addition, the demand for the anode material market in the IT and EV market until
2015 is forecasted.

Key Points

World's first report specialized on anode materials for li-ion secondary cells
Includes the up-to-date technology trends for alloy, and compound-based anode materials as well
as graphite.
Analysis on more than 20 anode material manufacturers in the world
Detailed market analysis from 2009 to 2011
2012-2015 anode market forecast

Table of Content
1. INTRODUCTION

1.1. Lithium metal secondary cell and Li-ion cell
1.2 Lithium metal anode
1.3 Requirement for anode material as alternative of lithium metal
1.4 Current development of carbon-based anode
1.5 Current development of anode material

2. CARBON-BASED ANODE MATERIAL

2.1 Overview of carbon
2.1.1 Combination of carbon atoms
2.1.2 Manufacturing process of carbon
2.1.2.1 Gas-phase carbonization
2.1.2.2 Liquid-phase carbonization
2.1.2.3 Solid-phase carbonization
2.2 Soft-carbon based anode material
2.2.1 Carbonite
2.2.1.1 Structure property
2.2.1.2 Electro-chemical property
2.2.1.3 Electrode reaction mechanism
2.2.1.4 Graphitic carbon manufacturing process and commercial graphite
2.2.1.4.1 Artificial graphite (MCMB/MCF/MAG)
2.2.1.4.2 Natural graphite
2.2.2 Low-temperature calcinated carbon
2.2.2.1 Structural property
2.2.2.2 Electro chemical property
2.2.2.3 Electro reaction mechanism
2.2.2.4 Manufacturing process
2.3 Hard-carbon based anode material
2.3.1 Hard-carbon based material (non-graphitizable carbons)
2.3.1.1 Structure property
2.3.1.2 Electro-chemical property
2.3.1.3 Electrode reaction mechanism
2.3.1.4 Manufacturing process

3. ALLOY-BASED ANODE MATERIAL

3.1 Allow-based anode materials
3.2 Characteristic and manufacturing technology of alloy-based anode material


Phone: +44 20 8123 2220

3.2.1 Problem and solution
3.2.2 Metal compound-based anode material
3.2.3 Metal - Carbon compound-based anode material
3.2.3.1 High capacity of active metal and carbon-coating of high capacity active metal and alloy
3.2.3.2 High capacity active metal and alloy/graphite-based carbon composite
3.2.3.3 Carbon coating of high capacity active metal and alloy/graphite-based carbon composite
3.2.3.4 Si chemical deposition of graphite and carbon nano fiber
3.2.4 Other Si anode material
3.2.4.1 3-dimensional porous Si
3.2.4.2 Si nano-tube
3.2.5 Metal/alloy thin-film anode

4. COMPOUND-BASED ANODE MATERIAL

4.1 Oxide based anode material
4.1.1 Li4Ti5O12 (or Li4/3Ti5/3O4)
4.1.2 TiO2
4.1.2.1 Rutile TiO2
4.1.2.2 Anatase TiO2
4.1.2.3 TiO2-B
4.1.2.4 Brookite
4.2 Nitride-based anode material

5. INFLUENCE OF ANODE ON STABILITY OF LI-ION CELL

6. TREND OF GLOBAL ANODE MANUFACTURERS IN JAPAN

6.1 Anode industry in Japan
6.1.1 Hitachi Chemical
6.1.2 Nippon Carbon
6.1.3 JFE Chemical
6.1.4 Mitsubishi Chemical
6.1.5 Hitachi Powdered Metals
6.1.6 Kureha
6.1.7 Showa Denko
6.1.8 Others
6.2 Trend of global anode manufacturers in China
6.2.1 BTR Eneregy Materials Co., Ltd.
6.2.2 Shanghai Shanshan Tech Co., Ltd.
6.2.3 Morgan AM&T Hairong Co., Ltd (formal, Changsha Hairong New Materials Co., Ltd)
6.2.4 Others
6.3 Trend of global anode manufacturers in China
6.3.1 OCI Materials.
6.3.2. POSCO Kemtech
6.3.3 GS Caltex
6.3.3 Aero Chemical
6.4 Others
6.4.1 TIMCAL Graphite & Carbon
6.4.2 ConocoPhilips

7. CURRENT STATUS AND FORECAST OF GLOBAL ANODE MATERIAL MARKET (2009~2015)

7.1 Current status of global anode material consumption (2009~2011)
7.1.1 Change in global anode material consumption
7.1.2 Change in global anode material by country


Phone: +44 20 8123 2220

7.1.3 Change in global anode material by type
7.1.4 Change in global anode material by country and type
7.1.4.1 Korea
7.1.4.2 Japan
7.1.4.3 China
7.2 Current status of anode material usage by li-ion secondary manufacturer
7.2.1 Samsung SDI
7.2.2 LG Chemical
7.2.3 Sanyo
7.2.4 Sony
7.2.5 Panasonic
7.2.6 Maxell
7.2.7 BYD
7.2.8 Lishen
7.2.9 ATL
7.2.10 BAK
7.2.11 A123
7.3 Current status of anode supply by country
7.4 Current status of anode material supply by manufacturer
7.4.1 Hitachi Chemical
7.4.2 JFE Chemical
7.4.3 Tokai Carbon
7.4.4 Showa Denko
7.4.5 Nippon Carbon
7.4.6 Mitsubishi Chemical
7.4.7 Chuo Denki Kogyo
7.4.8 Hitachi Powdered Metals
7.4.9 Nippon Power Graphite
7.4.10 Carbon Tech
7.4.11 BTR
7.4.12 Shanshan Tech
7.4.13 Morgan AM&T(Changsha)
7.5 Current status of LIB anode material by type
7.6 Market forecast of LIB anode material market (2012~2015)


Phone: +44 20 8123 2220

I would like to order:

Product name: Anode Material for Li-ion Secondary Battery - Technology Trend and Market
Forecast (2012 ver.)
Product link: http://marketpublishers.com/r/A343E0C7C20EN.html
Product ID: A343E0C7C20EN
Price: US$ 4,950.00 (Single User License / Electronic Delivery)

If you want to order Corporate License or Hard Copy, please, contact our Customer Service: office@marketpublishers.com

Payment

To pay by Credit Card (Visa, MasterCard, American Express, PayPal), please, click 'BUY NOW' button
on product page http://marketpublishers.com/r/A343E0C7C20EN.html

To pay by Wire Transfer, please, fill in your contact details in the form below:

First name:
Last name:
E-mail:
Company:
Address:
City:
Zip/Post Code:
Country:
Tel:
Fax:
Your message:

* All fields are required

Customer Signature _______________________________________

Please, note that by ordering from MarketPublisher.com you are agreeing to our Terms & Conditions at
http://marketpublishers.com/docs/terms_conditions.html

To place an order via fax simply print this form, fill in the information below
and fax the completed form to +44 20 7900 3970

Powered by TCPDF (www.tcpdf.org)

Anode material-4-li-ion-secondary-battery-technology-trend-n-market-forecast-2012-ver

Recommended

Recommended

More Related Content

Featured

Featured (20)

Anode material-4-li-ion-secondary-battery-technology-trend-n-market-forecast-2012-ver