1. MOLINS PA8-5 FILTER TIP
ASSEMBLER
4 FILTER TRAYS, COMPLETE WITH
RACK FEED FOR TRAYS
TIPPING GLUE ROLLERS FOR PRE
PERFORATED TIPPING AND
ADAPTABLE FOR EASY CONVERSION
TO SKIP GAP GUMMING.
INSPECTION SYSTEM FOR LOOSE
ENDS AND MISSING FILTERS
CIGARETTE REJECTION ON START
UP AND QUALITY CHECK
HAUNI MAX FILTER TIP
ASSEMBLER
TYPE 3/5/15 SERIES FOR USE WITH MK8 OR
GARANT
FEATURES:
FILTER TRAY RACK,COMPLETE WITH FOUR
DESPENSING TRAY ASSEMBLER
SET GAUGES VACUM OPERATED MULTI ROL
DRUM AND ROLL BLOCK TO GIVE 4 TURNS ON
CIGARETTE ASSEMBLY.
TRIPLE 1117 MAX CIGARETTE INFI DRUM(K-
DRUM)
6 BLADES , SQUARE KNIFE 60 mm TIPPER,COST
REDUCTION FOR KNIFE REPLACEMENT
LOOSE END MISSING FILTER INSPECTION SKIP
GAP GUMMING DRIVE PREPARATION
VTL250 BEKER VACCUM PUMP FOR MAIN
MANIFOLD (NEW), PIPED AND WIRED.
HAUNI GARANT CIGARETTE PRODUCTION
CAPACIY IS UPTO 4000 CIGARETTES/Min
1.info@marsonsgroup.com
2.konzept.trading@gmail.com
http://www.marsonsgroup.com/
02

2. AUTOMATIC TRAY
UNLOADER
WE CAN SUPPLY A NEW TRAY
UNLOADER OF OUR OWN DESIGN.
THE UNIT CAN BE ADAPTED TO
FEED THE MOST PACKING
MACHINE APPLICATION, FROM
SOFT PACK TO HARD BOX. THE
MACHINE WILLCURRENTLY
FEED CIGARETTES ATA RATE OF
UP TO 5000 CIGARETTESPER
MINUTE. THE FULL TRAY
STATION MAY BE FILLED WITH
UP TO EIGHTTRAYS WAITING TO
BE EMPTIED. THE MACHINE CAN
BE SUPPLIED TO SUIT ANY
KNOWN CIGARETTE LENGTH OR
SIZE
MASS FLOW TRAY
FILLER
TO SUIT ANY MAKING
GROUP FILTER TIPS IN OR
OUT NO FILTER
MASSFLOW TRAY FILTER
WILL FILL CIGARETTE
TRAYS FROM 3000 TO
5000 CIGARETTES PER
MINUTE. THE TRAY FILLER
IS MANUFACTURED USING
A DONAR MACHINE, HAUNI
HCK. THE ORIGNAL
VACUUM SYSTEM FOR
THESE MACHINES WAS
CONSDERED UNRELIABLE
AND SO WE HAVE
REPLACED THEM WITH
MASS FLOW CONVEYER
LINK. ADDITIONAL
MODIFICATIONS ENSURE
SMOOTH OPERATION AND
CONSTANT TRAY FILLING.
SEMI AUTOMATIC
TRAY
UNLOADER
THE SEMIAUTOMATIC TRAY
UNLOADER IS A SIMPLE UNIT
THAT MAY BE FITTED TO ANY
CIGARETTE OR CIGAR PACKING
MACHINE. ITCAN BE
CONFIGIURE FOR FRONT OR
REAR TRAY LOADING AND
PROVIDESA COST EFFECTIVE
CIGAR DISCHARGE

3. HARD BOX PACKAGING MACHINE
TO COVER SPEEDS UP TO 180 PACKETS /MIN
COMPLETE WITH ALL DOWN STREAM EQUIPMENT
EITHER NEW OR FROM A DONOR MACHINE
WE CAN UNDER TAKE ANY CONVERSION TO SIZE
CHANGE AND UPDATE FROM 1 TO 46 MODIFICATIONSV
TO COVER SPEEDAND EFFICIENCY ON YOUR MACHINE
OR FROM OUR DONOR STOCK RESOURCES.
THE CHANGES CAN BE THREE DIMENSIONAL
FROM 5 CIG TO 30 CIGARETTES WITH A CIGARETTE
LENGTHOF UPTO 100 MM.
FROM ANY DONOR MACHINE, WHICH IS COMPLETE
OR PARTIALLY COMPLETE .WE WILL CHANGE AND COVER
100%OF YOUR NEEDS.
SOFT CUP PACKING MACHINE
COVERING 3000, 5000, 6000 SERIES SOFT CUP PACKING
COVRING CIGARETTE SIZE FROM6.5 MM TO 8 MM DIAMETER
AND CIGARETTE LENGTHFROM70 MM TO 120 MM.THE BASIC SEUP
IS WITH THE USE OF LAMINATED ALMUNIUM FOIL AND TISSUE ,
WITH CUT LABEL AND CUT STAMP.WE OFFER THE 5000 SERIES
PACKER WITH BUILT IN MODIFICATIONS OF THE 6000 MACHINES.
TO MAINTAIN A SPEED 250 PACKETS/MINUT