We are frequently asked which tools can be used to fabricate King StarBoard®. Now we are sharing tips for using handheld cutting tools. More info: https://www.kingplastic.com/tips-for-using-handheld-cutting-tools Follow Us Facebook: https://www.facebook.com/kingplasticcorporation Twitter: https://twitter.com/KingPlastic LinkedIn: https://www.linkedin.com/company/king-plastic-corporation Instagram: https://www.instagram.com/kingplastic/ Website: https://www.kingplastic.com

1. 8 TIPS ON
USING
HANDHELD
CUTTING
TOOLS
www.kingplastic.com
For King StarBoard®

2. WEAR THE
PROPER
SAFETY
EQUIPMENT
www.kingplastic.com
Safety glasses, ear protection,
and dust mask
1

3. TO CREATE A
CRISP EDGE
WITH A
CIRCULAR
SAW
www.kingplastic.com
Use a good carbide blade with
60 teeth for a 10" blade and
40 teeth for a 7.5" blade
2

4. FOR DETAIL
CUTS, DRILL
ACCESS HOLES
AS A STARTING
POINT TO ENTER
THE MATERIAL
www.kingplastic.com
3

5. USE CLAMPS
TO AVOID
SHIFTING
OF THE
MATERIAL
www.kingplastic.com
4

6. FOR TEMPLATE
CUTTING, USE A
CARBIDE FLUSH
TRIMMING
ROUTER BIT
WITH A TOP
BEARING
www.kingplastic.com
Clamp the template to
oversized King StarBoard®
5

7. REMEMBER,
A CLEAN CUT
WILL PRODUCE
A CLEAN EDGE
www.kingplastic.com
6

8. NEED TO
SMOOTH OUT
A JAGGED CUT?
www.kingplastic.com
Use 100-150 grit sandpaper
or a carbide roundover router
bit with bottom bearing
7

9. DO NOT SAND
THE SURFACE
www.kingplastic.com
King StarBoard® surface
comes with a matte finish
on both sides of the sheet and
sanding will cause it to lose
its uniform matte finish
8

10. NEED MORE
TIPS?
Visit link in bio for more
information and videos
www.kingplastic.com