Bee-Lok is a two-component epoxy system used to lock casing joints instead of welding. It comes in kits containing resin, catalyst, and an applicator. To use, mix the catalyst into the resin and coat the male threads. The mixture has a 75 minute pot life and cures fully within 24 hours. Bee-Lok is effective at preventing loosening of casing joints and can be broken by heating the connection to 500-600 degrees Fahrenheit.

1. B E S T O L I F E . C O M
2777 N. Stemmons Fwy, Suite 1800 • Dallas, TX 75207 • (855) 243-9164
BEE-LOK
PRODUCT CHARACTERISTICS
PACKAGING
CONTAINER
SIZE
OUTER CASING
DIAMETER (IN.)
SHIPPING
WEIGHT
APPROXIMATE
USES PER 8 OZ. KIT
QUANTITY
PER CASE
8 oz.
4 ½
16 oz.
5 ½
6 5
/8
7 5
/8 - 9 5
/8
10 ¾ - 13 5
/8
9 lb.
10
9 lb.
6
4
3
2
12
6
Bee-Lok Thread Lock Kit
DESCRIPTION
Bee-Lok is an economical, two-component epoxy
system designed to replace welding for locking
casing joints on the bottom lengths. This product
is effective in preventing joint loosening. Each kit
contains a base resin, catalyst, and an applicator.
APPLICATION
To apply, empty the catalyst into the base epoxy resin
and mix thoroughly. Use the applicator (flat knife) to
cover the male threads with the mixture and makeup
the connection. The pot life of the mixture is 75
minutes under normal conditions. The cure time is 24
hours. To break connections, heat the joint from 500°-
600° F.
NOTES
A safety data sheet is available from the
manufacturer. Do not use on oxygen lines or in
oxygen enriched atmospheres.
M I S C E L L A N E O U S
CONNECTION
TYPE
FRICTION
FACTOR
Rotary Shouldered 0.9 - 1.0
Non-interference
tubing and casing
1.3 - 2.0