PSC Handle-tech Hose Lifter - An easy to handle light-weight device to lift hoses and pipes without the needs for placing under hoses or pipes and to improve ergonomics and productivity by simplifying hose handling.
2. PSC is India’s largest manufacturer & exporter of Hands-Free Safety Tools
that enables you to carry out tasks in the oilfield without getting your
hands close to the pinch and crush points. Our tools help facilitate safe
movement of the load by controlling the load from a distance, without
physically touching the load. We have the most exhaustive product range
from one source that includes Push/Pull Poles, Anti-Tangle Taglines, Hose
Lifters, Manual Lifting Aids, Slogging Spanner Holders, Cylinder Holders,
Small Pipe Lifters, Structural Plates Guiding Tools, etc. PSC Hands-Free
Safety Tools was introduced in 2014 and is today exported to over 25
countries worldwide from the Gulf of Mexico to the North Sea and are used
in the Deepwater Projects in East Coast of India. PSC Hands-Free Tools are
approved by almost all major Oil & Gas Companies, Primary Metals and
OEMs in Wind Energy. Our products are proof load tested and due to the
sheer volumes, we sell, our pricing is the most competitive in the industry.
WHO ARE WE?
Project Sales Corporation (PSC) is a specialist Hand Safety company
distributing and marketing the most complete range of hand protection
products to the oilfield industry. Unlike other vendors, our focus is on
mitigating risks associated with hand injuries while handling tasks in
oilfields, platforms and yards in the Oil & Gas Industry. We brought Impact
Gloves to India in 2009 and are the largest distributors of gloves for the
oilfield selling over 10000s of pairs annually. PSC also introduced its
Hands-Free Tools in 2014 and is one of the largest distributors worldwide.
PSC HANDS-FREE SAFETY TOOLS
WHAT MAKES US SPECIAL IN HAND SAFETY?
3. PSC LOADGUIDER ANTI-TANGLE TAGLINE
Made from Polyex 12 mm with 6 mm core (18 mm) Synthetic Rope
offering Remarkable Strength and Light Weight.
High visibility yellow color and color-coded Eyes for various
lengths.
Dirt-repellent cover and taglines can be washed if required.
Available in various lengths 10, 15, 20, 25, 30, 35 and 45 feet.
Key Features -
PSC SafeGuider High-Viz Anti-Tangle Taglines are specially
designed to be a safe alternative to ineffective and hazardous rope
when guiding a suspended load. PSC SafeGuider Hi-Viz taglines
are tangle-resistant and knot free and feature a high visibility coat
to repel corrosive material and can be seen in low-light situations.
They always retain their shape and are easily rolled up for storage.
PSC LoadGuider Anti-Tangle Taglines are tangle resistant as it is
designed with a rigid core and stiff cover braiding to prevent any
swiveling on itself and wrapping around objects. The patented
Helix spiral effect advances grip in wet and slippery conditions.
PSC SAFEGUIDER HI-VIZ ANTI-TANGLE TAGLINE
PSC GUIDE-IT SAFETY RIGGER TAGLINE
PSC Guide-It Safety Rigger Tagline is made of finest polyester
fibers in 14mm diameter with a unique ultra-lightweight 25kN
galvanized steel composite swivel hook that opens 2” making it
easy to attach to the load and comes with a safety latch.
PSC SAFEGUIDER TAGLINE RETRIEVER TOOL
These lightweight tools are used for the Hands-Free guiding and
directing of heavy crane and forklift loads. This dielectric
hardwood makes the product safe to use. The head has a
serrated "S" head and a "C" head options depending on the
requirement. The sand dipped finish in the grip area allows for
better grip while working with these tools. Available in various
lengths - 2, 3, 4, 6 & 8 Feet Lengths.
PSC HANDS-FREE SAFETY TOOLS
4. PSC LoadGuider Tool allows user to maintain a safe distance from the load at all
times, thereby mitigating any risk of pinching or crushing hands and feet while
handling suspended loads or maneuvering loads in tight positions until the load is in
its final placement/resting position. The fiberglass push/pull pole fitted with a nylon
head allows to safely maneuver loads at all times, by keeping hands-off from a
potential pinch and crush injury zone. Available in sizes 21", 42", 50", 72", 96".
PSC Guide-It™ Hand Safety Tool assists in “Hands-Free” guiding, spotting and landing
suspended loads, maneuvering drill pipe and all types of tubulars on pipe racks or the
platform, snagging taglines and sling legs, etc. A strong fiber glass pole with a nylon
head allows personnel to push and guide suspended loads to its final place, without
taking them too close to the load to avoid a caught-between situation struck-by
hazard.
PSC LOADGUIDER PUSH/PULL TOOL
PSC GUIDE-IT PUSH/PULL TOOL
PSC LOAD-IT
PSC Load-It Positioning Tool can be used for a multitude of jobs like an extension
to move, push or reposition suspended items and equipment.
Features.
• S-head/ M-head interchangeable
• Available lengths - 2ft, 4ft, 6ft, 8ft, 10ft
PSC HANDS-FREE SAFETY TOOLS
5. This tool consists of two identical parts that clamp
around the drill pipe when operated by two
personnel. This provides maximum stability for the
drill stand when engaging with the stand set in the
rotary slips. Each part is fitted with wrist lanyards to
reduce any risk of dropping the tool down the hole
while also fitted with a quick disconnect device to
prevent any risks to personnel limbs associated with
rotating equipment.
PSC TAGLINE RETRIEVER TOOL
The PSC Tagline Retriever Tool allows a worker to be
at a much safer distance from the load when
suspended. The rubber buffer in the tool works as a
push/pull against suspended loads to guide them,
especially when landing loads in tight or in
congested spaces.
PSC LOAD-IT MAG HEAD TOOL
PSC Load-It Mag Head Tool (PSC-LIT-MAG-FG-008) is a 4 feet
Fiberglass Pole with a Pivoting Magnet (Rated for #80 lbs.) to guide
steel plates and steel structural products. This is an extendable
telescopic pole that extends up to 8 feet long. It has a threaded
locking mechanism which can be used to lock at any length until it
gets unthreaded induced by a massive push load.
PSC DRILL PIPE CONNECTION GUIDE
PSC TRT-3P EXTENDABLE SAFETY TOOL
PSC TRT-3P Extendable Tagline Retriever Tool, when
collapsed the safety tool is used to guide and
manoeuvre suspended loads, pull slung loads, and
push suspended loads to their final position without
the need for hands to do it-making the operations
safer. The inner aluminum pole allows the tool to be
extended up to 12 feet to retrieve taglines without
getting into the red zone under a suspended load.
PSC HANDS-FREE SAFETY TOOLS
6. The tool can be used for lifting & moving gas cylinders. It
is made from Die-Cast Aluminum and is planned to be
light (2kg) and rigid without compromising its strength.
The durable, warm-touch coating improves operator
safety and comfort.
PSC TubularGuider
PSC TubularGuider features non-slip grips, a locking mechanism and a super strong
aluminum shaft. The dual release uses a spring-loaded noose release to extend the
cable through the tool to release the tubular or the slide control which instantly
drops the noose from the tool.
The tool is available in 3 sizes: 36 inches, 48 inches and 60 inches long.
PSC GASGRAB
PSC FingerSaver keeps the hands away from the impact
of the hammer on the flogging spanner and from pinch
points. The FingerSaver offers support to the tool
equivalent to that of hands and fingers, it is designed
carefully and examined on typical applications by the
users where large spanners and flogging spanners are
used on nuts and bolts.
PSC FINGERSAVER
PSC Chisel And Punch Holder Tool is ergonomically
designed to provide a comfortable-firm grip, keeping in
mind the problems and difficulties faced by the workers
with the chisel application.
PSC CHISEL AND PUNCH HOLDER
PSC HANDS-FREE SAFETY TOOLS
7. The PSC Ezy Lift Pipe Lifting Tool is designed to keep the
wrist and hand in a neutral position and avoid strain. It
helps to prevent pinched fingers and cuts from sharp
surfaces with proper body positioning and lifting.
PSC EZY LIFT PIPE LIFTING TOOL
PSC LIFT ASSIST MANUAL LIFTING AIDS
A new range of PSC Hands‐Off policy tools (Lift Assist
Manual Lifting Aids) prevents back pain problems from
bending, and simultaneously improves ergonomics in
workplace. It also reduces possible chances of hand and
finger injuries associated with lifting and carrying the
small equipment with bare hands.
PSC HANDLE-TECH PIPE HANDLE
The Handle-Tech Pipe Handle tool is a simple handle
that could be locked onto any hose or pipe, enabling
the worker to move the hose while standing in a more
natural position, almost as easily as carrying a suitcase.
PSC Guide-It Set Back Tool is a double U-shaped attachment, one forward facing
and one rear facing to facilitate the stabilization of a suspended drill pipe of upto
5⅞ inches in a vertical position. Allowing easy exchange from a push / pull
function, giving the user maximum control over the load.
PSC GUIDE-IT SET BACK TOOL
PSC HANDS-FREE SAFETY TOOLS
8. Product Support
shivani@projectsalescorp.com
info@projectsalescorp.com
Visit our website:
www.pschandsfree.com
PSC GUIDE-IT LOAD HANDLING TOOL
The V-shaped attachment of the tool engages with the corner of containers and
baskets which allows a suspended load to be stabilized by exerting a pushing action. Its
unique angled design acts as a locking mechanism providing the handler with
maximum control over the suspended load. Also, it has an angled U-shaped
attachment that facilitates the 4” inch-box iron frames of open baskets and power
packs.
PSC GUIDE-IT PIPE GRAB TOOL
For use in the movement of a suspended larger pipe, drill tools, bulk hoses and
BOP service lines, the 10” Pipe Grab Tool perfectly complements the existing use of
taglines by providing exceptional control of the load and flexibility to the handler
in the movement and landing of large diameter pipe.
Contact Us
Project Sales Corp
28, Founta Plaza, Suryabagh
Visakhapatnam - 530020
Andhra Pradesh, INDIA.
Shivani - +91- 9603166448
Satish - +91-988 5149 412
Customer Support Rep
Ranga - +91-891 2564 393
PSC HANDS-FREE SAFETY TOOLS
