The Fireye BurnerPro is a compact flame safeguard control system designed to provide burner sequencing, ignition, and continuous flame monitoring for on/off, multi-stage, or modulating burners firing oil or gas fuels. It is intended for non-permanent operations that require burner recycle at least once every 24 hours. A complete BurnerPro system includes the BP110/230 control unit, a flame scanner, and a wiring base. The document also provides contact information for questions and pricing on BurnerPro systems and accessories.
Burner Management Flame Detection Requirements and Exceptions
Fireye BurnerPRO and more (2)
1. INTRODUCINGTHE FIREYE® BURNERPRO
A compact, microprocessor based, primary flame safeguard
control system designed to provide the proper burner sequencing,
ignition and continuous flame monitoring for onoff, multi-
stage, or modulating burners used in commercial heating and
process equipment firing oil and gas fuels. Designed for use in
non-permanent operations that requires burner recycle at least
once every 24 hours. A complete BurnerPRO system includes the
BP110/230, flame scanner and wiring base.
AreasonablealternativetoFlameDetection!
60-2944- 1
Wiring Base
Open base with terminal block and knockouts
With grounding finger, 4.2”L x 4.2”W x 1.22”H
FIREYE® FLAME SCANNERS
UV non self-checking Scanner Models:
UV1AL-3, UV1AL-6, UV90L-1, UV90L-2.
3 and 6 foot straight and or Angle Scanners.
ContactJohnStrubleinourCedarKnollslocationwithanyquestionsandorpricing
(973)538-7161ext.1311orviae-mailatjstruble@usginc.com
RemembertoaddUSGtoyoursupplierandsubcontractorbidlist!
Visitusonlinetofindalocationnearyou www.usginc.com