(NO IMAGE)Specify what ions are present in solution upon dissolvin.pdf

•

0 likes•4 views

(NO IMAGE) Specify what ions are present in solution upon dissolving each of the following substances in water. HNO3 Express your answers as ions separated by a comma. (NH4)2SO4 Express your answers as ions separated by a comma. Solution When HNO3 is dissolved in water, the ions produced are (H+)/(H3O+) + (NO3-) When (NH4)2SO4 is dissolved in water, the ions produced are 2(NH4+) + (SO4-2).

Education

More from JUSTSTYLISH3B2MOHALI

Explain in Detail DTE-DCE Transmission Solution Firstly the DTE-DCE stands for Data circuit terminating equipment and Data terminal point.The DTE is an terminating instrument to change the user dceived signals.eetails into the received signals.DTE Device is a terminal and the DCE is a Modem.The words DTE and DCE are much common in data communications. 1.The DCE and DCE are main rules that tells the responsibilities. 2.The data terminal equipment is able to control the data circuit terminal with the software flow control or through HW control. 3.The major contrast between DTE and DCE is clocking.At a time the device is unable to serve as DCE and DTE..

Explain in Detail DTE-DCE TransmissionSolutionFirstly the DTE-.pdf

JUSTSTYLISH3B2MOHALI

Explain the data component of social media information systems (SMIS). Solution Social media use of information technology to support the sharing of content among networks of users. Their are five components that make upan information system. 1)Hardware: Information systems hardware is the part of an information system you can touch the physical component of the technology .Computers ,keybords disk drives ,ipads and flash drives are all examples of information systems hardware 2)Software: Software is a set of instructions that tells the hardware what to do.Software in not tangible it cannot be touched.When programmers create software programs what they are really is simply typing out lists of instructions that tell the hardware what to do. 3)Data: Data is a collection of facts.for example your street address the city you live in and your phone number are all pieces of data.Data can become a power full tool for business. 4)People: When thinking about information systems.It is easy to get focused on the technology components and forget that understood how they integrrate into an organisation.People involved in the information system as a programmers,front line help desk workers and systems analysts and cheif information officers. 5)Process: A proces is a series of steps undertaken to achieve a desired outcome or goal.Infomation sysytem are become moreand more integrated with organizational processes,bring more productivity and better control to those processese..

Explain the data component of social media information systems (SMIS).pdf

JUSTSTYLISH3B2MOHALI

Figure C Which structure in the cell shown in Figure C above stores materials, such as water, salts, proteins, and carbohydrates? A. structure C B. structure B C. structure D D. structure A A BCD Solution The Answer is A. Structure C They are called vacuoles are the storage bubbles found in both plant and animal cell. They can also store waste products so the rest of the cell is protected from contamination..

Figure CWhich structure in the cell shown in Figure C above stores.pdf

JUSTSTYLISH3B2MOHALI

Coral reefs. How sensitive to changes in water temperature are coral reefs? To find out, scientists examined data on sea surface temperatures and coral growth per year at locations in the Red Sea.^1 What are the explanatory and response variables? Are they categorical or quantitative? Solution explanatory variable : water temperature response variable : coral growth per year there are quantitaitve because there are numbers to maesure the temperature and growth.

Coral reefs. How sensitive to changes in water temperature are coral .pdf

JUSTSTYLISH3B2MOHALI

•0.336 moles of a weak, monoproticacid added to a final volume of 2.00 L exhibits 2.14% ionization. What is the pOH of the solution? 11.56 is the answer please explain steps Solution The equation for the dissociation of HA is: HAc H+ + A¯ Molarity = 0.336/2 = 0.168 M 1) Find [H+] using the concentration and the percent dissociation: (0.0214) (0.168) = 3.595 x 10¯3 M 2) pH = -log [H+] = -log (3.595 x 10¯3) = 2.44 3) pH + pOH = 14 pOH = 14 -2.44 = 11.56.

•0.336 moles of a weak, monoproticacid added to a final volume of 2..pdf

JUSTSTYLISH3B2MOHALI

You are to simulate a dispatcher using a priority queue system in C++. New processes are to be entered using a GUI with priority included (numbering should be automatic). Processes are also to be terminated by GUI command. Context switches are to be by command with the cause of the switch being either a blocking call, time slice exceeded or termination. Assume only one CPU. Priorities and numbers of processes can be kept small, just big enough to demonstrate the required functionality. You may pre-populate the queues initially from a data file. I am looking at the mechanism as you are NOT creating actual processes, just simulating them. Functionality to be provided by you: 1. Priority based Ready Queue(s). 2. Blocked list. 3. Output of complete system status after every context switch showing ready, blocked, and running processes. Sample Output: A3 Antrian WAKTU TUN... TA1Telah diEksekusi Ambil No Antrian Solution //dispatcherSim.java public class dispatcherSim { public static void main(String[] args) { simulator sim=new simulator(1000); sim.addProcessReady(1); //test data sim.addProcessReady(3); sim.addProcessReady(2); sim.addProcessReady(7); sim.addProcessReady(4); sim.addProcessBlocked(1); sim.addProcessBlocked(3); sim.addProcessBlocked(2); sim.addProcessBlocked(7); sim.addProcessBlocked(4); GUI gui=new GUI(sim); gui.setVisible(true); } } ===================================================================== ========= //GUI.java import java.awt.BorderLayout; import java.awt.Dialog.ModalityType; import java.awt.Dimension; import java.awt.event.ActionEvent; import java.awt.event.ActionListener; import javax.swing.ButtonGroup; import javax.swing.JButton; import javax.swing.JComboBox; import javax.swing.JDialog; import javax.swing.JFrame; import javax.swing.JLabel; import javax.swing.JMenu; import javax.swing.JMenuBar; import javax.swing.JMenuItem; import javax.swing.JPanel; import javax.swing.JRadioButton; import javax.swing.JScrollPane; import javax.swing.JTextArea; import javax.swing.JTextField; public class GUI extends JFrame { private JPanel panel; private JMenuBar menuBar; private JMenu menu; private JMenuItem addNew; private JMenuItem unBlock; private JMenuItem terminate; private JMenuItem readMe; private JMenuItem exit; private JButton cSwitch; private JTextArea info; private JScrollPane scroll; private simulator sim; private final String CS = \"CONTEXT SWITCH: \"; private int count = 1; public GUI(simulator disSim) { sim = disSim; initComponents(); } private void addNewBox() { final JDialog addDialog = new JDialog(); JPanel miniPanel = new JPanel(new BorderLayout()); miniPanel.setPreferredSize(new Dimension(175, 100)); ButtonGroup radioGroup = new ButtonGroup(); final JRadioButton blocked = new JRadioButton(\"Blocked List\"); final JRadioButton ready = new JRadioButton(\"Ready Queue\"); ready.setSelected(true); radioGroup.add(ready); radioGroup.add(blocked); JPanel radios = new JPanel(); radios.setPreferredSize(new Dimension(50, 50)); .

You are to simulate a dispatcher using a priority queue system in C+.pdf

JUSTSTYLISH3B2MOHALI

Write a program that accepts an arithmetic expression of unsigned integers in postfix notation and builds the arithmetic expression tree that represents that expression. From that tree, the corresponding fully parenthesized infix expression should be displayed and a file should be generated that contains the three address format instructions. This topic is discussed in the week 4 reading in module 2, section II-B. The main class should create the GUI shown below: Pressing the Construct Tree button should cause the tree to be constructed and using that tree, the corresponding infix expression should be displayed and the three address instruction file should be generated. The postfix expression input should not be required to have spaces between every token. Note in the above example that 9+- are not separated by spaces. The above example should produce the following output file containing the three address instructions: Add R0 5 9 Sub R1 3 R0 Mul R2 2 3 Div R3 R1 R2 Inheritance should be used to define the arithmetic expression tree. At a minimum, it should involve three classes: an abstract class for the tree nodes and two derived classes, one for operand nodes and another for operator nodes. Other classes should be included as needed to accomplish good object-oriented design. All instance data must be declared as private. You may assume that the expression is syntactically correct with regard to the order of operators and operands, but you should check for invalid tokens, such as characters that are not valid operators or operands such as 2a, which are not valid integers. If an invalid token is detected a RuntimeException should be thrown and caught by the main class and an appropriate error message should be displayed. Three Adddress Generator Enter Postfix Expression 359 2 3 Construct Tree Infix Expression ((3-(5 9))/ (2* 3 Solution #include #include #include #include #include struct TREE //Structure to represent a tree { char data; struct TREE *right,*left,*root; }; typedef TREE tree; /* Stack Using Linked List */ struct Stack //Structure to represent Stack { struct TREE *data; struct Stack *next,*head,*top; //Pointers to next node,head and top }; typedef struct Stack node; node *Nw; //Global Variable to represent node void initialize(node *&n) { n = new node; n -> next = n -> head = n -> top = NULL; } void create(node *n) { Nw = new node; //Create a new node Nw -> next = NULL; //Initialize next pointer field if(n -> head == NULL) //if first node { n -> head = Nw; //Initialize head n -> top = Nw; //Update top } } void push(node *n,tree *ITEM) { node *temp = n -> head; if(n -> head == NULL) //if First Item is Pushed to Stack { create(n); //Create a Node n -> head -> data = ITEM; //Insert Item to head of List n -> head = Nw; return; //Exit from Function } create(n); //Create a new Node Nw -> data = ITEM; //Insert Item while(temp -> next != NULL) temp = temp -> next; //Go to Last Node temp -> next = Nw; //Point New node n -> top = Nw; //Upda.

Write a program that accepts an arithmetic expression of unsigned in.pdf

JUSTSTYLISH3B2MOHALI

Why was the knowledge of macromolecules “structure” very important i.pdf

JUSTSTYLISH3B2MOHALI

Why did the sovereign debt problem of Greece a country that accounts for less than 2 percent of euro area GDP threaten the banking system throughout the euro area? Solution Greece is the one of the most indebted nation. The Greek national debt is worth 320 billion euros ,or 175 per cent of GDP. The two third of this debt is owned to other countries and central banks in the Euro area. On the whole European countries have lent Greece 52.9 billion euros bilaterally, 130.9 billion through the EFSF and IMF has lent 25 billion euros. If problem in Greece increases , then it will default on all the above mentioned loans, which will be a situation of concern for all the European nations as they have lent a sizable chunk to Greece. Thus, sovereign debt problem of Greece a country that accounts for less than 2 per cent of euro area GDP threaten the banking system throughout the euro area..

Why did the sovereign debt problem of Greece a country that accounts.pdf

JUSTSTYLISH3B2MOHALI

Which of the following could be the most likely cause of a superinfection? community-acquired MRSA fecal-oral contamination poor hygiene long-term antibiotic therapy Solution Answer: Which of the following could be the most likely cause of a superinfection? Ans:Long term antibiotic therapy, explanation: prolonged antibiotic treatment exerts a selective pressure on the patient\'s intrinsic flora. As a result, over time, microorganisms develop resistance to antibiotic..

Which of the following could be the most likely cause of a superi.pdf

JUSTSTYLISH3B2MOHALI

What is the theory of public debt management??? Solution 1. Sovereign debt management is the process of establishing and executing a strategy for managing the government\'s debt in order to raise the required amount of funding, achieve its risk and cost objectives, and to meet any other sovereign debt management goals the government may have set, such as developing and maintaining an efficient market for government securities. 2. In a broader macroeconomic context for public policy, governments should seek to ensure that both the level and rate of growth in their public debt is fundamentally sustainable, and can be serviced under a wide range of circumstances while meeting cost and risk objectives. Sovereign debt managers share fiscal and monetary policy advisors\' concerns that public sector indebtedness remains on a sustainable path and that a credible strategy is in place to reduce excessive levels of debt. Debt managers should ensure that the fiscal authorities are aware of the impact of government financing requirements and debt levels on borrowing costs.1 Examples of indicators that address the issue of debt sustainability include the public sector debt service ratio, and ratios of public debt to GDP and to tax revenue. 3. Poorly structured debt in terms of maturity, currency, or interest rate composition and large and unfunded contingent liabilities have been important factors in inducing or propagating economic crises in many countries throughout history. For example, irrespective of the exchange rate regime, or whether domestic or foreign currency debt is involved, crises have often arisen because of an excessive focus by governments on possible cost savings associated with large volumes of short-term or floating rate debt. This has left government budgets seriously exposed to changing financial market conditions, including changes in the country\'s creditworthiness, when this debt has to be rolled over. Foreign currency debt also poses particular risks, and excessive reliance on foreign currency debt can lead to exchange rate and/or monetary pressures if investors become reluctant to refinance the government\'s foreign-currency debt. By reducing the risk that the government\'s own portfolio management will become a source of instability for the private sector, prudent government debt management, along with sound policies for managing contingent liabilities, can make countries less susceptible to contagion and financial risk. 4. A government\'s debt portfolio is usually the largest financial portfolio in the country. It often contains complex and risky financial structures, and can generate substantial risk to the government\'s balance sheet and to the country\'s financial stability. As noted by the Financial Stability Forum\'s Working Group on Capital Flows, \"recent experience has highlighted the need for governments to limit the build-up of liquidity exposures and other risks that make their economies especially vulnerable to exte.

What is the theory of public debt managementSolution1. Sove.pdf

JUSTSTYLISH3B2MOHALI

This is a three part question. For each part the answer requires identifying an asymmetric encryption technique, hashing or both. As part of each question you need to discuss the technique to demonstrate your understanding of how the functionality (confidentiality, authenticity, integrity) is supported. You need to discuss the details of what the sender and receiver do and the key usage if applicable. What technique is used to exchange messages between two parties ensuring confidentiality? Discuss. What technique is used to exchange messages between two parties ensuring authenticity? Discuss c. What technique is used to exchange messages between two parties ensuring integrity? Discuss. Solution a. Ensuring confidentiality, a very key component of protecting information confidentiality would be Encryption. Encryption ensures that only the right person who knows the key can read the information. Encryption is very widespread in today’s world while interacting with one another through internet. It is the most effective way to achieve the data security. Secure Socket Layer and Transport Layer Security are the security protocols for communication over internet. Example: Internet Banking. Other ways to make sure that the data remains confidential is to implement file permissions and access control list to restrict access to sensitive information and design of file permissions and access control lists must be kept as easy as possible for proper maintenance. c. Integrity means protecting information so that it cannot be customized by not permitted people. Information is only as valuable as it is perfect. Similar to the data confidentiality, encryption plays a prominent role in preserving data integrity. The data shared with another person within a company or externally to a third party or creating an automatic system report containing sensitive information, these all data should be encrypted to prevent the data or sensitive information of a company to be accessed and changed by the third person. The data stored on file shares allow encryption can prevent the data from being altered by malicious objective or being accessed by individuals who do not have access. When accessing data integrity and designing security requirements it is necessary to ensure the level of encryption is sufficient to protect the integrity of the data, the more sensitive the data the higher the level of encryption that needs to be enabled..

This is a three part question. For each part the answer requires ide.pdf

JUSTSTYLISH3B2MOHALI

Complete a personal SWOT analysis evaluating your understanding and skills in the five following categories: 1. Communication skills; 2. Critical thinking skills; 3. Respect for diversity; 4. Professional, social, and ethical responsibility; and 5. Lifelong learning practices Your assignment should include: A SWOT graph with bullet-points defining your strengths, weaknesses, opportunities, and threats as they relate to the five university learning objectives. A brief narrative describing each defined trait. There is no page-length requirement for this assignment, however; you should make every effort to provide a complete and accurate personal analysis. Pay close attention to detail, including grammar, usage, design, and depth. You may want to take the time to create several drafts before submitting the final version of this assignment. Solution Strengths of Communication Skill: Weakness of Communication Skill: Opportunities of Communication Skill Threat of Communication Skill: Strength of Critical Thinking Skill: Weakness of Critical thinking Opportunities of Critical thinking Threats of Critical Thinking:.

Complete a personal SWOT analysis evaluating your understanding and .pdf

JUSTSTYLISH3B2MOHALI

this case? 2. Suppose a country with a history of high inflation is admitted to the European Union, under the condition that it must bring its inflation down to levels consistent with those typically observed in member countries. Suppose the country agrees; characterize the impact of this change on its AD curve Solution A reduction in inflation will lead to an increase in the demand for goods, which means that at a given price level the quantity demanded would increase and thus the aggregate demand curve will shift to the right,.

this case 2. Suppose a country with a history of high inflation is.pdf

JUSTSTYLISH3B2MOHALI

The term liberalism, when applied to governments, is very different from the term liberal in America. Where liberalism implies a limited government, here in the United States a liberal is not usually seen as supporting a smaller government. This can be very confusing. In an effort to better understand these various meanings, we need to explore the variations within liberalism itself. So who would like to explain how modern liberalism varies from classical liberalism? In addition, in what ways is classical liberalism similar to conservatism today? No copy and paste or screenshot pictures !!!!!!!!!!!!!!!!!! Solution If government concentration, monitoring and controlling is limit in nature,on any business or business entities, it is called leberalism. Hence, I can say that liberalism of all stripes is primarily concerned with liberty, and political values that are related to liberty. Modern liberalism is the new era where it combine the characteristics of both collectivist and individualist. Usually governments made some policies follow by business people in their business actions. Governments give freedom to the business parties, and in most of the areas they will give freedom of decision making to them. Classical liberalism focus on the traditional aspects of civil liberties under the rule of law with an emphasis on economic freedom. Classical liberalism advocates civil liberties with a limited government under the rule of law, private property, and belief in laissez-faire economic policy..

The term liberalism, when applied to governments, is very different .pdf

JUSTSTYLISH3B2MOHALI

These are the 4 functions #include KiostreamP using namespace std; stuct godeType. int info; aodeNype link; void createList(nodeType*& first, nodeType & last); void printList nodeType & first int main(0 nodeType first, last unt numi greateList first, last) printList(first); SystemC PAUSE\"); return 0; void createList nodeType & first, nodeType & last) int number; nodeType *newNode; Solution //EXAMPLE PROGRAM FOR SINGLE LINKED LIST # include # include # include struct node { int number; node *next; }; class singlelist { node *first,*prev,*temp,*curr; public: singlelist() { first=NULL; } void create() { cout<<\"Stop by -999\"<>temp->number; while(temp->number!=-999) { temp->next=NULL; if(first==NULL) { first=temp; prev=first; } else { prev->next=temp; prev=temp; } temp=new node; cin>>temp->number; } //end of while } void deletenode() { int num; cout<<\"\ Enter the number to delete \"; cin>>num; if(first->number==num) { first=first->next; return; } else { prev=first; curr=first->next; while(curr->next!=NULL) { if(curr->number==num) { prev->next=curr->next; return; } prev=curr; curr=curr->next; } } if(curr->number==num) { prev->next=NULL; return; } cout<<\"\ No such number\"; } void insertbefore() { int nu; temp=new node; cout<<\"\ Enter the number \"; cin>>temp->number; cout<<\"\ before the number \"; cin>>nu; temp->next=NULL; prev=first; curr=first; /* if(first==NULL) //if the list is empty then we can insert in this way { first=temp; return; }*/ if(curr->number==nu) { temp->next=first; first=temp; return; } else { prev=curr; curr=curr->next; while(curr->next!=NULL) { if(curr->number==nu) { prev->next=temp; temp->next=curr; return; } prev=curr; curr=curr->next; } } if(curr->number==nu) { prev->next=temp; temp->next=curr; return; } cout<<\"\ No such number \"; } void insertafter() { int nu; temp=new node; cout<<\"\ Enter the number \"; cin>>temp->number; cout<<\"\ After the number \"; cin>>nu; temp->next=NULL; prev=first; curr=first; /* if(first==NULL) //if the list is empty then we can insert in this way { first=temp; return; }*/ if(curr->number==nu) { temp->next=first->next; first->next=temp; return; } else { prev=curr; curr=curr->next; while(curr->next!=NULL) { if(curr->number==nu) { temp->next=curr->next; curr->next=temp; return; } prev=curr; curr=curr->next; } } if(curr->number==nu) { curr->next=temp; temp->next=NULL; return; } cout<<\"\ No such number \"; } void print() { cout<<\" The list is \"<number<<\"-->\"; temp=temp->next; } cout<<\"Nil\"<>ch; switch(ch) { case 1: s.insertbefore(); s.print(); break; case 2: s.insertafter(); s.print(); break; case 3: s.deletenode(); s.print(); break; case 4: s.print(); break; case 5: s.print(); exit(1); } } getch(); }.

These are the 4 functions #include KiostreamP using namespac.pdf

JUSTSTYLISH3B2MOHALI

The beliefs, customs, values, structure, normative rules, and material traits of a social organization define _________________________ BOOK: an Introduction to Enterprise Architecture by Bernard, 3rd edition Solution Culture is quite evident in how the organization functions. The beliefs, customs, values, structure, normative rules, and material traits of a social organization define __________CULTURE _of the organization______________.

The beliefs, customs, values, structure, normative rules, and materi.pdf

JUSTSTYLISH3B2MOHALI

Can prisoners, young children, mentally disabled adults, or the severely mentally ill give informed consent and participate voluntarily in social research studies? Explain your answer. Solution No. They can not particiapate in social research studies because young children, mentally disabled adults, or the severely mentally ill are not matured enough to give responses to the questions related to society. Prisoners, though they are matured but accessing information from them is quite difficult. some time they may give responses which are harm ful to the society..

Can prisoners, young children, mentally disabled adults, or the seve.pdf

JUSTSTYLISH3B2MOHALI

Can we know if we have a soul? What about other people or animals? Solution Soul and its existance is the topic on which all people have different view. In scientific point we can say that this all is about energy. We all should have some source from which we must have getting some energy this source is our soul. soul will give us decision making power what is wrong and what is right and according to the instruction of our soul we do live our life So if this is what we can say about the sould then in all living thing there must be a soul which give it power to live there life and power to make there own decisions.

Can we know if we have a soul What about other people or animals.pdf

JUSTSTYLISH3B2MOHALI

C++ Bank Account Error Fix, full code. I am using Dev-C++ to Compile and Execute. The project is below, I have supplied the code and I\'m getting an error in SavingsAccount.h file. 17 5 C:\\Users\\adam.brunell\\Documents\\Classes\\C++\\Week4\\SavingsAccount.h [Error] \'SavingsAccount::SavingsAccount(std::string, double, double)\' is protected A.Assume i.SavingsAccount: Assume an Interest Rate of 0.03 ii.HighInterestSavings: Assume an Interest Rate of 0.05, Minimum Balance = $2500 iii.NoServiceChargeChecking: Assume an Interest Rate = 0.02, Minimum of Balance = $1000 iv.ServiceChargeChecking – Assume account service charge = $10, Maximum number of checks = 5, Service Charge if customer exceeds the maximum number of checks = $5. v.NoServicechargeChecking: Assume an interest rate = 0.02, Minimum Balance = $1000 vi.HighInterestChecking: Assume an interest rate = 0.05, Minimum Balance = $5000 vii.CertificateOfDepsit: Assume an interest rate = 0.05, Initial Number of Maturity Months = 6 B.Capitalize the first letter of the derived class names. C.Use the following driver to validate your program: #include #include #include #include \"bankAccount.h\" #include \"SavingsAccount.h\" #include \"HighInterestSavings.h\" #include \"NoServiceChargeChecking.h\" #include \"ServiceChargeChecking.h\" #include \"HighInterestChecking.h\" #include \"CertificateOfDeposit.h\" #include \"checkingAccount.h\" using namespace std; int main() { vector accountsList; //SavingsAccount( Name, Account number, Balance ) - Assume an interest rate = 0.03 accountsList.push_back(new SavingsAccount(\"Bill\", 10200, 2500)); //HighInterestSavings(Name, Account Number, Balance) -- Assume an interest rate = 0.05, Minimum balance = $2500 accountsList.push_back(new HighInterestSavings(\"Susan\", 10210, 2000)); //NoServiceChargeChecking(Name, Account Number, Balance) -- Assume an interest rate = 0.02, Minimum balance = $1000 accountsList.push_back(new NoServiceChargeChecking(\"John\", 20100, 3500)); //ServiceChargeChecking(Name, Account Number, Balance) -- Assume account service charge = $10, Maximum number of checks = 5, Service Charee Excess Number of Checks = $5 accountsList.push_back(new ServiceChargeChecking(\"Ravi\", 30100, 1800)); //HighIntererestChecking(Name, Account Number, Balance) - Assume an inerest rate = 0.05, Minimum balance = $5000 accountsList.push_back(new HighInterestChecking(\"Sheila\", 20200, 6000)); //Certificate(name, Account Number, Balance, Interest Rate, Number of Months) - Assume an initial interest rate = 0.05, Initial Number of Maturity Months = 6 accountsList.push_back(new CertificateOfDeposit(\"Hamid\", 51001, 18000, 0.075, 18)); cout << \"January:\ -------------\" << endl; for (int i = 0; i < accountsList.size(); i++) { accountsList[i]->createMonthlyStatement(); accountsList[i]->print(); cout << endl; } cout << \"\ February:\ -------------\" << endl; for (int i = 0; i < accountsList.size(); i++) { accountsList[i]->createMonthlyStatement(); accountsList[i]->.

C++ Bank Account Error Fix, full code. I am using Dev-C++ to Compile.pdf

JUSTSTYLISH3B2MOHALI

More from JUSTSTYLISH3B2MOHALI (20)