1. MATERIAL SAFETY DATA SHEET
FOR COATED ABRASIVES
Page 1 of 2
COMPANY: VAG International Joint Stock Company Version 2
18 Nhan My, My Dinh, Nam Tu Liem Revised Date: 17st
July 2014
Hanoi, Vietnam
Phone No.: +84437878368
Fax No.: +84437878388
Email: info@vag.com.vn
TRADE NAME:
FIVEPLUS ABRASIVE MESH
1. MATERIAL DESCRIPTION
1.1 Abrasive: Aluminium Oxide
1.2 Bond: Cured phenolic resin
1.3 Backing: Open Mesh containing Polyester
2. HAZARDS INDENTIFICATION
NOT APPLICABLE
Coated abrasive are not dangerous products
3. PHYSICAL AND CHEMICAL CHARACTERISTICS
3.1 Physical state: Solid
3.2 Color: Honey
3.3 Odor: N/A
3.4 pH: N/A
3.5 Change of physical state: N/A
3.6 Density: N/A
3.7 Bulk density: N/A
3.8 Vapor pressure: N/A
3.9 Explosion properties: N/A
3.10 Viscosity: N/A
3.11 Solubility in water: Not Defined
4. FIRE AND EXPLOSION HAZARD DATA
4.1 Fire fighting measures: None specific
Water, powder, foam, sand, CO2 etc. can be used
if compatible with operating conditions.
4.2 Unusual fire & explosion hazards: N/A
5. STABILITY AND REACTIVITY
5.1 Stability: Stable
5.2 Conditions to avoid: N/A
5.3 Material to avoid: Strong acids
5.4 Decomposition products: If coated abrasive are used in accordance with instructions,
no hazardous decomposition products are created.
2. MATERIAL SAFETY DATA SHEET
FOR COATED ABRASIVES
Trade name: Fiveplus Abrasive Mesh Page 2 of 2
6. HEALTH HAZARD DATA
6.1 Route(s) of entry: During use
Inhalation: airborne dusts of fumes
Eyes: airborne dusts of fumes
6.2 Health hazards: Acute and Chronic: breathing difficulty,
eye, nasal and respiratory irritation
6.3 Signs and symptoms of exposure
Material in eye, nasal passages.
Coughing and/or breathing difficulty may be present.
7. EMERGENCY AND FIRST AID MEASURES
7.1 Dust inhalation: Remove from exposure, seek medical advice if needed
7.2 Eyes: Remove from exposure and flush with clean water.
Seek medical advice if needed.
7.3 Skin: No hazardous effect known.
7.4 Ingestion: No hazardous effect known.
8. HANDLING AND STORAGE
8.1 Follow recommendation for machines and federal, state and local regulations.
8.2 Store coated abrasives in moderate, constant temperature and humidity conditions
9. EXPOSURE CONTROL AND PERSONAL PROTECTION
9.1 Eye protection: Wear safety glasses when sanding or grinding
9.2 Dust protection: Use appropriate dust mask.
9.3 Hand protection: Wear protective gloves
9.4 Ear protection: Use hearing protection
9.5 Skin protection: Use protective clothing
9.6 Work/hygienic practices: Ordinary washing and cleanliness practices
10. DISPOSAL CONSIDERATIONS
Follow national and regional regulations!
11. TRANSPORT
Coated abrasives are not dangerous products.
12. OTHER INFORMATION
The information is provided in good faith and is based on data considered accurate,
however, VAG International Company makes no warranty with respect of the accuracy
of the information and disclaims responsibility for damages of any kind resulting from
the use of this data or the results to be obtained from the use thereof. Customers are
encouraged to make their own determination as to the suitability of this product for their
purpose prior to use.